Browse Source

Allow override of TMC_SW_* pins, etc.

pull/1/head
Ludy 5 years ago
committed by Scott Lahteine
parent
commit
ba22857f93
  1. 36
      Marlin/src/pins/pins_BIGTREE_SKR_PRO_V1.1.h

36
Marlin/src/pins/pins_BIGTREE_SKR_PRO_V1.1.h

@ -1,9 +1,9 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -104,14 +104,20 @@
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PC12
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PC11
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PC10
#endif
#endif
#if HAS_TMC220x
/**
* TMC2208 stepper drivers
* TMC2208/TMC2209 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
@ -174,16 +180,20 @@
//
#define SDSS PB12
/*
| _____ _____
| NC | · · | GND 5V | · · | GND
| RESET | · · | PF12(SD_DETECT) (LCD_D7) PG7 | · · | PG6 (LCD_D6)
| (MOSI)PB15 | · · | PF11(BTN_EN2) (LCD_D5) PG3 | · · | PG2 (LCD_D4)
| (SD_SS)PB12 | · · | PG10(BTN_EN1) (LCD_RS) PD10 | · · | PD11 (LCD_EN)
| (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA8 | · · | PG4 (BEEPER)
|
| EXP2 EXP1
*/
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | PF12(SD_DETECT) (LCD_D7) PG7 | · · | PG6 (LCD_D6)
* (MOSI)PB15 | · · | PF11(BTN_EN2) (LCD_D5) PG3 | · · | PG2 (LCD_D4)
* (SD_SS)PB12 | · · | PG10(BTN_EN1) (LCD_RS) PD10 | · · | PD11 (LCD_EN)
* (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA8 | · · | PG4 (BEEPER)
*
* EXP2 EXP1
*/
//
// LCDs and Controllers
//
#if HAS_SPI_LCD
#define BEEPER_PIN PG4
#define BTN_ENC PA8

Loading…
Cancel
Save