jbrazio
9 years ago
committed by
Scott Lahteine
Scott Lahteine
7 changed files with 1633 additions and 1 deletions
@ -0,0 +1,863 @@ |
|||||
|
#ifndef CONFIGURATION_H |
||||
|
#define CONFIGURATION_H |
||||
|
|
||||
|
#include "boards.h" |
||||
|
#include "macros.h" |
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= Getting Started =============================
|
||||
|
//===========================================================================
|
||||
|
/*
|
||||
|
Here are some standard links for getting your machine calibrated: |
||||
|
* http://reprap.org/wiki/Calibration
|
||||
|
* http://youtu.be/wAL9d7FgInk
|
||||
|
* http://calculator.josefprusa.cz
|
||||
|
* http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
|
||||
|
* http://www.thingiverse.com/thing:5573
|
||||
|
* https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
|
||||
|
* http://www.thingiverse.com/thing:298812
|
||||
|
*/ |
||||
|
|
||||
|
// This configuration file contains the basic settings.
|
||||
|
// Advanced settings can be found in Configuration_adv.h
|
||||
|
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= DELTA Printer ===============================
|
||||
|
//===========================================================================
|
||||
|
// For a Delta printer replace the configuration files with the files in the
|
||||
|
// example_configurations/delta directory.
|
||||
|
//
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= SCARA Printer ===============================
|
||||
|
//===========================================================================
|
||||
|
// For a Scara printer replace the configuration files with the files in the
|
||||
|
// example_configurations/SCARA directory.
|
||||
|
//
|
||||
|
|
||||
|
// @section info
|
||||
|
|
||||
|
#if ENABLED(USE_AUTOMATIC_VERSIONING) |
||||
|
#include "_Version.h" |
||||
|
#else |
||||
|
#include "Default_Version.h" |
||||
|
#endif |
||||
|
|
||||
|
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||
|
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||
|
// build by the user have been successfully uploaded into firmware.
|
||||
|
#define STRING_CONFIG_H_AUTHOR "@jbrazio" // Who made the changes.
|
||||
|
#define SHOW_BOOTSCREEN |
||||
|
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
|
||||
|
//#define STRING_SPLASH_LINE2 STRING_DISTRIBUTION_DATE // will be shown during bootup in line 2
|
||||
|
|
||||
|
// @section machine
|
||||
|
|
||||
|
// SERIAL_PORT selects which serial port should be used for communication with the host.
|
||||
|
// This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
|
||||
|
// :[0,1,2,3,4,5,6,7]
|
||||
|
#define SERIAL_PORT 0 |
||||
|
|
||||
|
// This determines the communication speed of the printer
|
||||
|
// :[2400,9600,19200,38400,57600,115200,250000]
|
||||
|
#define BAUDRATE 250000 |
||||
|
|
||||
|
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
|
//#define BLUETOOTH
|
||||
|
|
||||
|
// The following define selects which electronics board you have.
|
||||
|
// Please choose the name from boards.h that matches your setup
|
||||
|
#ifndef MOTHERBOARD |
||||
|
#define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D |
||||
|
#endif |
||||
|
|
||||
|
// Optional custom name for your RepStrap or other custom machine
|
||||
|
// Displayed in the LCD "Ready" message
|
||||
|
#define CUSTOM_MACHINE_NAME "BQ Hephestos 2" |
||||
|
|
||||
|
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
|
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
|
#define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config
|
||||
|
|
||||
|
// This defines the number of extruders
|
||||
|
// :[1,2,3,4]
|
||||
|
#define EXTRUDERS 1 |
||||
|
|
||||
|
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
|
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
|
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
|
//#define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
|
||||
|
//#define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
|
||||
|
|
||||
|
//// The following define selects which power supply you have. Please choose the one that matches your setup
|
||||
|
// 1 = ATX
|
||||
|
// 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
|
||||
|
// :{1:'ATX',2:'X-Box 360'}
|
||||
|
|
||||
|
#define POWER_SUPPLY 1 |
||||
|
|
||||
|
// Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it.
|
||||
|
//#define PS_DEFAULT_OFF
|
||||
|
|
||||
|
// @section temperature
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= Thermal Settings ============================
|
||||
|
//===========================================================================
|
||||
|
//
|
||||
|
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
|
//
|
||||
|
//// Temperature sensor settings:
|
||||
|
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
||||
|
// -1 is thermocouple with AD595
|
||||
|
// 0 is not used
|
||||
|
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||
|
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||
|
// 3 is Mendel-parts thermistor (4.7k pullup)
|
||||
|
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||
|
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||
|
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||
|
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||
|
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||
|
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||
|
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||
|
// 70 is the 100K thermistor found in the bq Hephestos 2
|
||||
|
//
|
||||
|
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
||||
|
// (but gives greater accuracy and more stable PID)
|
||||
|
// 51 is 100k thermistor - EPCOS (1k pullup)
|
||||
|
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||
|
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||
|
//
|
||||
|
// 1047 is Pt1000 with 4k7 pullup
|
||||
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||
|
// 147 is Pt100 with 4k7 pullup
|
||||
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||
|
//#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
//#define DUMMY_THERMISTOR_999_VALUE 100
|
||||
|
// :{ '0': "Not used", '4': "10k !! do not use for a hotend. Bad resolution at high temp. !!", '1': "100k / 4.7k - EPCOS", '51': "100k / 1k - EPCOS", '6': "100k / 4.7k EPCOS - Not as accurate as Table 1", '5': "100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '7': "100k / 4.7k Honeywell 135-104LAG-J01", '71': "100k / 4.7k Honeywell 135-104LAF-J01", '8': "100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9': "100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10': "100k / 4.7k RS 198-961", '11': "100k / 4.7k beta 3950 1%", '12': "100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13': "100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '60': "100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '55': "100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '2': "200k / 4.7k - ATC Semitec 204GT-2", '52': "200k / 1k - ATC Semitec 204GT-2", '-2': "Thermocouple + MAX6675 (only for sensor 0)", '-1': "Thermocouple + AD595", '3': "Mendel-parts / 4.7k", '1047': "Pt1000 / 4.7k", '1010': "Pt1000 / 1k (non standard)", '20': "PT100 (Ultimainboard V2.x)", '147': "Pt100 / 4.7k", '110': "Pt100 / 1k (non-standard)", '998': "Dummy 1", '999': "Dummy 2" }
|
||||
|
#define TEMP_SENSOR_0 70 |
||||
|
#define TEMP_SENSOR_1 0 |
||||
|
#define TEMP_SENSOR_2 0 |
||||
|
#define TEMP_SENSOR_3 0 |
||||
|
#define TEMP_SENSOR_BED 0 |
||||
|
|
||||
|
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
||||
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 |
||||
|
|
||||
|
// Actual temperature must be close to target for this long before M109 returns success
|
||||
|
#define TEMP_RESIDENCY_TIME 10 // (seconds)
|
||||
|
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
|
||||
|
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
|
||||
|
|
||||
|
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
|
||||
|
// to check that the wiring to the thermistor is not broken.
|
||||
|
// Otherwise this would lead to the heater being powered on all the time.
|
||||
|
#define HEATER_0_MINTEMP 5 |
||||
|
#define HEATER_1_MINTEMP 5 |
||||
|
#define HEATER_2_MINTEMP 5 |
||||
|
#define HEATER_3_MINTEMP 5 |
||||
|
#define BED_MINTEMP 5 |
||||
|
|
||||
|
// When temperature exceeds max temp, your heater will be switched off.
|
||||
|
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
|
||||
|
// You should use MINTEMP for thermistor short/failure protection.
|
||||
|
#define HEATER_0_MAXTEMP 250 |
||||
|
#define HEATER_1_MAXTEMP 275 |
||||
|
#define HEATER_2_MAXTEMP 275 |
||||
|
#define HEATER_3_MAXTEMP 275 |
||||
|
#define BED_MAXTEMP 150 |
||||
|
|
||||
|
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
|
||||
|
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
|
||||
|
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
|
||||
|
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
|
||||
|
|
||||
|
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
|
||||
|
//#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R
|
||||
|
//#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= PID Settings ================================
|
||||
|
//===========================================================================
|
||||
|
// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
|
||||
|
|
||||
|
// Comment the following line to disable PID and enable bang-bang.
|
||||
|
#define PIDTEMP |
||||
|
#define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
|
||||
|
#define PID_MAX BANG_MAX // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
|
||||
|
#if ENABLED(PIDTEMP) |
||||
|
//#define PID_DEBUG // Sends debug data to the serial port.
|
||||
|
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
|
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
|
//#define PID_PARAMS_PER_EXTRUDER // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
|
// Set/get with gcode: M301 E[extruder number, 0-2]
|
||||
|
#define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
|
||||
|
// is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
|
#define PID_INTEGRAL_DRIVE_MAX PID_MAX //limit for the integral term
|
||||
|
#define K1 0.95 //smoothing factor within the PID
|
||||
|
|
||||
|
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
|
// Ultimaker
|
||||
|
#define DEFAULT_Kp 10.7 |
||||
|
#define DEFAULT_Ki 0.45 |
||||
|
#define DEFAULT_Kd 3 |
||||
|
|
||||
|
// MakerGear
|
||||
|
//#define DEFAULT_Kp 7.0
|
||||
|
//#define DEFAULT_Ki 0.1
|
||||
|
//#define DEFAULT_Kd 12
|
||||
|
|
||||
|
// Mendel Parts V9 on 12V
|
||||
|
//#define DEFAULT_Kp 63.0
|
||||
|
//#define DEFAULT_Ki 2.25
|
||||
|
//#define DEFAULT_Kd 440
|
||||
|
|
||||
|
#endif // PIDTEMP
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= PID > Bed Temperature Control ===============
|
||||
|
//===========================================================================
|
||||
|
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
|
||||
|
//
|
||||
|
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
|
||||
|
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
|
||||
|
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
|
||||
|
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
|
||||
|
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
|
||||
|
// shouldn't use bed PID until someone else verifies your hardware works.
|
||||
|
// If this is enabled, find your own PID constants below.
|
||||
|
//#define PIDTEMPBED
|
||||
|
|
||||
|
//#define BED_LIMIT_SWITCHING
|
||||
|
|
||||
|
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
|
||||
|
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
|
||||
|
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
|
||||
|
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
|
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
|
||||
|
//#define PID_BED_DEBUG // Sends debug data to the serial port.
|
||||
|
|
||||
|
#if ENABLED(PIDTEMPBED) |
||||
|
|
||||
|
#define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
|
||||
|
|
||||
|
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
|
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
|
#define DEFAULT_bedKp 10.00 |
||||
|
#define DEFAULT_bedKi .023 |
||||
|
#define DEFAULT_bedKd 305.4 |
||||
|
|
||||
|
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
|
//from pidautotune
|
||||
|
//#define DEFAULT_bedKp 97.1
|
||||
|
//#define DEFAULT_bedKi 1.41
|
||||
|
//#define DEFAULT_bedKd 1675.16
|
||||
|
|
||||
|
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
|
#endif // PIDTEMPBED
|
||||
|
|
||||
|
// @section extruder
|
||||
|
|
||||
|
//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
|
||||
|
//can be software-disabled for whatever purposes by
|
||||
|
#define PREVENT_DANGEROUS_EXTRUDE |
||||
|
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
|
||||
|
#define PREVENT_LENGTHY_EXTRUDE |
||||
|
|
||||
|
#define EXTRUDE_MINTEMP 170 |
||||
|
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//======================== Thermal Runaway Protection =======================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
/**
|
||||
|
* Thermal Runaway Protection protects your printer from damage and fire if a |
||||
|
* thermistor falls out or temperature sensors fail in any way. |
||||
|
* |
||||
|
* The issue: If a thermistor falls out or a temperature sensor fails, |
||||
|
* Marlin can no longer sense the actual temperature. Since a disconnected |
||||
|
* thermistor reads as a low temperature, the firmware will keep the heater on. |
||||
|
* |
||||
|
* The solution: Once the temperature reaches the target, start observing. |
||||
|
* If the temperature stays too far below the target (hysteresis) for too long, |
||||
|
* the firmware will halt as a safety precaution. |
||||
|
*/ |
||||
|
|
||||
|
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
|
||||
|
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================= Mechanical Settings =========================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
// @section machine
|
||||
|
|
||||
|
// Uncomment this option to enable CoreXY kinematics
|
||||
|
//#define COREXY
|
||||
|
|
||||
|
// Uncomment this option to enable CoreXZ kinematics
|
||||
|
//#define COREXZ
|
||||
|
|
||||
|
// Enable this option for Toshiba steppers
|
||||
|
//#define CONFIG_STEPPERS_TOSHIBA
|
||||
|
|
||||
|
// @section homing
|
||||
|
|
||||
|
// coarse Endstop Settings
|
||||
|
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
|
|
||||
|
#if DISABLED(ENDSTOPPULLUPS) |
||||
|
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
|
||||
|
//#define ENDSTOPPULLUP_XMAX
|
||||
|
//#define ENDSTOPPULLUP_YMAX
|
||||
|
//#define ENDSTOPPULLUP_ZMAX
|
||||
|
//#define ENDSTOPPULLUP_XMIN
|
||||
|
//#define ENDSTOPPULLUP_YMIN
|
||||
|
//#define ENDSTOPPULLUP_ZMIN
|
||||
|
//#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
|
#endif |
||||
|
|
||||
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||
|
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
|
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
|
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||
|
const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||
|
#define DISABLE_MAX_ENDSTOPS |
||||
|
//#define DISABLE_MIN_ENDSTOPS
|
||||
|
|
||||
|
// If you want to enable the Z probe pin, but disable its use, uncomment the line below.
|
||||
|
// This only affects a Z probe endstop if you have separate Z min endstop as well and have
|
||||
|
// activated Z_MIN_PROBE_ENDSTOP below. If you are using the Z Min endstop on your Z probe,
|
||||
|
// this has no effect.
|
||||
|
//#define DISABLE_Z_MIN_PROBE_ENDSTOP
|
||||
|
|
||||
|
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
|
||||
|
// :{0:'Low',1:'High'}
|
||||
|
#define X_ENABLE_ON 0 |
||||
|
#define Y_ENABLE_ON 0 |
||||
|
#define Z_ENABLE_ON 0 |
||||
|
#define E_ENABLE_ON 0 // For all extruders
|
||||
|
|
||||
|
// Disables axis when it's not being used.
|
||||
|
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
||||
|
#define DISABLE_X false |
||||
|
#define DISABLE_Y false |
||||
|
#define DISABLE_Z false |
||||
|
|
||||
|
// @section extruder
|
||||
|
|
||||
|
#define DISABLE_E false // For all extruders
|
||||
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||
|
|
||||
|
// @section machine
|
||||
|
|
||||
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
|
#define INVERT_X_DIR true |
||||
|
#define INVERT_Y_DIR true |
||||
|
#define INVERT_Z_DIR true |
||||
|
|
||||
|
// @section extruder
|
||||
|
|
||||
|
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
|
#define INVERT_E0_DIR true |
||||
|
#define INVERT_E1_DIR false |
||||
|
#define INVERT_E2_DIR false |
||||
|
#define INVERT_E3_DIR false |
||||
|
|
||||
|
// @section homing
|
||||
|
|
||||
|
// ENDSTOP SETTINGS:
|
||||
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||
|
// :[-1,1]
|
||||
|
#define X_HOME_DIR -1 |
||||
|
#define Y_HOME_DIR -1 |
||||
|
#define Z_HOME_DIR -1 |
||||
|
|
||||
|
#define min_software_endstops false // If true, axis won't move to coordinates less than HOME_POS.
|
||||
|
#define max_software_endstops false // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||
|
|
||||
|
// @section machine
|
||||
|
|
||||
|
// Travel limits after homing (units are in mm)
|
||||
|
#define X_MIN_POS 0 |
||||
|
#define Y_MIN_POS 0 |
||||
|
#define Z_MIN_POS 0 |
||||
|
#define X_MAX_POS 210 |
||||
|
#define Y_MAX_POS 297 |
||||
|
#define Z_MAX_POS 210 |
||||
|
|
||||
|
//===========================================================================
|
||||
|
//========================= Filament Runout Sensor ==========================
|
||||
|
//===========================================================================
|
||||
|
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
|
||||
|
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made.
|
||||
|
// It is assumed that when logic high = filament available
|
||||
|
// when logic low = filament ran out
|
||||
|
#if ENABLED(FILAMENT_RUNOUT_SENSOR) |
||||
|
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
|
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
|
#define FILAMENT_RUNOUT_SCRIPT "M600" |
||||
|
#endif |
||||
|
|
||||
|
//===========================================================================
|
||||
|
//=========================== Manual Bed Leveling ===========================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
//#define MANUAL_BED_LEVELING // Add display menu option for bed leveling.
|
||||
|
//#define MESH_BED_LEVELING // Enable mesh bed leveling.
|
||||
|
|
||||
|
#if ENABLED(MANUAL_BED_LEVELING) |
||||
|
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
|
#endif // MANUAL_BED_LEVELING
|
||||
|
|
||||
|
#if ENABLED(MESH_BED_LEVELING) |
||||
|
#define MESH_MIN_X 10 |
||||
|
#define MESH_MAX_X (X_MAX_POS - MESH_MIN_X) |
||||
|
#define MESH_MIN_Y 10 |
||||
|
#define MESH_MAX_Y (Y_MAX_POS - MESH_MIN_Y) |
||||
|
#define MESH_NUM_X_POINTS 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
|
#define MESH_NUM_Y_POINTS 3 |
||||
|
#define MESH_HOME_SEARCH_Z 4 // Z after Home, bed somewhere below but above 0.0.
|
||||
|
#endif // MESH_BED_LEVELING
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//============================ Bed Auto Leveling ============================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
// @section bedlevel
|
||||
|
|
||||
|
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||
|
//#define DEBUG_LEVELING_FEATURE
|
||||
|
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z-Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
||||
|
|
||||
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE) |
||||
|
|
||||
|
// There are 2 different ways to specify probing locations:
|
||||
|
//
|
||||
|
// - "grid" mode
|
||||
|
// Probe several points in a rectangular grid.
|
||||
|
// You specify the rectangle and the density of sample points.
|
||||
|
// This mode is preferred because there are more measurements.
|
||||
|
//
|
||||
|
// - "3-point" mode
|
||||
|
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
||||
|
// You specify the XY coordinates of all 3 points.
|
||||
|
|
||||
|
// Enable this to sample the bed in a grid (least squares solution).
|
||||
|
// Note: this feature generates 10KB extra code size.
|
||||
|
//#define AUTO_BED_LEVELING_GRID
|
||||
|
|
||||
|
#if ENABLED(AUTO_BED_LEVELING_GRID) |
||||
|
|
||||
|
#define LEFT_PROBE_BED_POSITION X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define RIGHT_PROBE_BED_POSITION X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define FRONT_PROBE_BED_POSITION Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define BACK_PROBE_BED_POSITION Y_MAX_POS - Y_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
|
||||
|
#define MIN_PROBE_EDGE 10 // The Z probe minimum square sides can be no smaller than this.
|
||||
|
|
||||
|
// Set the number of grid points per dimension.
|
||||
|
// You probably don't need more than 3 (squared=9).
|
||||
|
#define AUTO_BED_LEVELING_GRID_POINTS 2 |
||||
|
|
||||
|
#else // !AUTO_BED_LEVELING_GRID
|
||||
|
|
||||
|
// Arbitrary points to probe.
|
||||
|
// A simple cross-product is used to estimate the plane of the bed.
|
||||
|
#define ABL_PROBE_PT_1_X X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define ABL_PROBE_PT_1_Y Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define ABL_PROBE_PT_2_X X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define ABL_PROBE_PT_2_Y Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
#define ABL_PROBE_PT_3_X ((X_MIN_POS + X_MAX_POS) / 2) |
||||
|
#define ABL_PROBE_PT_3_Y Y_MAX_POS - Y_PROBE_OFFSET_FROM_EXTRUDER |
||||
|
|
||||
|
#endif // AUTO_BED_LEVELING_GRID
|
||||
|
|
||||
|
// Offsets to the Z probe relative to the nozzle tip.
|
||||
|
// X and Y offsets must be integers.
|
||||
|
#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // Z probe to nozzle X offset: -left +right
|
||||
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Z probe to nozzle Y offset: -front +behind
|
||||
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z probe to nozzle Z offset: -below (always!)
|
||||
|
|
||||
|
#define Z_RAISE_BEFORE_HOMING 5 // (in mm) Raise Z axis before homing (G28) for Z probe clearance.
|
||||
|
// Be sure you have this distance over your Z_MAX_POS in case.
|
||||
|
|
||||
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min.
|
||||
|
|
||||
|
#define Z_RAISE_BEFORE_PROBING 5 // How much the Z axis will be raised before traveling to the first probing point.
|
||||
|
#define Z_RAISE_BETWEEN_PROBINGS 1 // How much the Z axis will be raised when traveling from between next probing points.
|
||||
|
#define Z_RAISE_AFTER_PROBING 10 // How much the Z axis will be raised after the last probing point.
|
||||
|
|
||||
|
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" // These commands will be executed in the end of G29 routine.
|
||||
|
// Useful to retract a deployable Z probe.
|
||||
|
|
||||
|
//#define Z_PROBE_SLED // Turn on if you have a Z probe mounted on a sled like those designed by Charles Bell.
|
||||
|
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||
|
|
||||
|
|
||||
|
//If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
|
||||
|
//it is highly recommended you let this Z_SAFE_HOMING enabled!!!
|
||||
|
|
||||
|
#define Z_SAFE_HOMING // This feature is meant to avoid Z homing with Z probe outside the bed area.
|
||||
|
// When defined, it will:
|
||||
|
// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
|
||||
|
// - If stepper drivers timeout, it will need X and Y homing again before Z homing.
|
||||
|
// - Position the Z probe in a defined XY point before Z Homing when homing all axis (G28).
|
||||
|
// - Block Z homing only when the Z probe is outside bed area.
|
||||
|
|
||||
|
#if ENABLED(Z_SAFE_HOMING) |
||||
|
|
||||
|
#define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28).
|
||||
|
#define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28).
|
||||
|
|
||||
|
#endif |
||||
|
|
||||
|
// Support for a dedicated Z probe endstop separate from the Z min endstop.
|
||||
|
// If you would like to use both a Z probe and a Z min endstop together,
|
||||
|
// uncomment #define Z_MIN_PROBE_ENDSTOP and read the instructions below.
|
||||
|
// If you still want to use the Z min endstop for homing, disable Z_SAFE_HOMING above.
|
||||
|
// Example: To park the head outside the bed area when homing with G28.
|
||||
|
//
|
||||
|
// WARNING:
|
||||
|
// The Z min endstop will need to set properly as it would without a Z probe
|
||||
|
// to prevent head crashes and premature stopping during a print.
|
||||
|
//
|
||||
|
// To use a separate Z probe endstop, you must have a Z_MIN_PROBE_PIN
|
||||
|
// defined in the pins_XXXXX.h file for your control board.
|
||||
|
// If you are using a servo based Z probe, you will need to enable NUM_SERVOS,
|
||||
|
// Z_ENDSTOP_SERVO_NR and SERVO_ENDSTOP_ANGLES in the R/C SERVO support below.
|
||||
|
// RAMPS 1.3/1.4 boards may be able to use the 5V, Ground and the D32 pin
|
||||
|
// in the Aux 4 section of the RAMPS board. Use 5V for powered sensors,
|
||||
|
// otherwise connect to ground and D32 for normally closed configuration
|
||||
|
// and 5V and D32 for normally open configurations.
|
||||
|
// Normally closed configuration is advised and assumed.
|
||||
|
// The D32 pin in Aux 4 on RAMPS maps to the Arduino D32 pin.
|
||||
|
// Z_MIN_PROBE_PIN is setting the pin to use on the Arduino.
|
||||
|
// Since the D32 pin on the RAMPS maps to D32 on Arduino, this works.
|
||||
|
// D32 is currently selected in the RAMPS 1.3/1.4 pin file.
|
||||
|
// All other boards will need changes to the respective pins_XXXXX.h file.
|
||||
|
//
|
||||
|
// WARNING:
|
||||
|
// Setting the wrong pin may have unexpected and potentially disastrous outcomes.
|
||||
|
// Use with caution and do your homework.
|
||||
|
//
|
||||
|
//#define Z_MIN_PROBE_ENDSTOP
|
||||
|
|
||||
|
#endif // AUTO_BED_LEVELING_FEATURE
|
||||
|
|
||||
|
|
||||
|
// @section homing
|
||||
|
|
||||
|
// The position of the homing switches
|
||||
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||
|
|
||||
|
// Manual homing switch locations:
|
||||
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||
|
#if ENABLED(MANUAL_HOME_POSITIONS) |
||||
|
#define MANUAL_X_HOME_POS 0 |
||||
|
#define MANUAL_Y_HOME_POS 0 |
||||
|
#define MANUAL_Z_HOME_POS 0 |
||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||
|
#endif |
||||
|
|
||||
|
// @section movement
|
||||
|
|
||||
|
/**
|
||||
|
* MOVEMENT SETTINGS |
||||
|
*/ |
||||
|
|
||||
|
#define HOMING_FEEDRATE {150*60, 150*60, 3.3*60, 0} // set the homing speeds (mm/min)
|
||||
|
|
||||
|
// default settings
|
||||
|
|
||||
|
#define DEFAULT_AXIS_STEPS_PER_UNIT {160, 160, 8000, 204.146} // default steps per unit for Ultimaker
|
||||
|
#define DEFAULT_MAX_FEEDRATE {200, 200, 3.3, 200} // (mm/sec)
|
||||
|
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 100, 3000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
|
||||
|
|
||||
|
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration in mm/s^2 for printing moves
|
||||
|
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration in mm/s^2 for retracts
|
||||
|
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||
|
|
||||
|
// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
|
||||
|
#define DEFAULT_XYJERK 20.0 // (mm/sec)
|
||||
|
#define DEFAULT_ZJERK 0.4 // (mm/sec)
|
||||
|
#define DEFAULT_EJERK 2.0 // (mm/sec)
|
||||
|
|
||||
|
|
||||
|
//=============================================================================
|
||||
|
//============================= Additional Features ===========================
|
||||
|
//=============================================================================
|
||||
|
|
||||
|
// @section more
|
||||
|
|
||||
|
// Custom M code points
|
||||
|
#define CUSTOM_M_CODES |
||||
|
#if ENABLED(CUSTOM_M_CODES) |
||||
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE) |
||||
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 |
||||
|
#define Z_PROBE_OFFSET_RANGE_MIN -20 |
||||
|
#define Z_PROBE_OFFSET_RANGE_MAX 20 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
// @section extras
|
||||
|
|
||||
|
// EEPROM
|
||||
|
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||
|
// M500 - stores parameters in EEPROM
|
||||
|
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
|
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
|
//define this to enable EEPROM support
|
||||
|
#define EEPROM_SETTINGS |
||||
|
|
||||
|
#if ENABLED(EEPROM_SETTINGS) |
||||
|
// To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
|
||||
|
#define EEPROM_CHITCHAT // Please keep turned on if you can.
|
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// M100 Free Memory Watcher
|
||||
|
//
|
||||
|
//#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
|
||||
|
|
||||
|
// @section temperature
|
||||
|
|
||||
|
// Preheat Constants
|
||||
|
#define PLA_PREHEAT_HOTEND_TEMP 210 |
||||
|
#define PLA_PREHEAT_HPB_TEMP 70 |
||||
|
#define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255
|
||||
|
|
||||
|
#define ABS_PREHEAT_HOTEND_TEMP 240 |
||||
|
#define ABS_PREHEAT_HPB_TEMP 110 |
||||
|
#define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255
|
||||
|
|
||||
|
//==============================LCD and SD support=============================
|
||||
|
// @section lcd
|
||||
|
|
||||
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||
|
// en, pl, fr, de, es, ru, bg, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, cn, test
|
||||
|
// See also language.h
|
||||
|
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en) |
||||
|
|
||||
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||
|
// See also documentation/LCDLanguageFont.md
|
||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||
|
|
||||
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||
|
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
|
||||
|
// Changed behaviour! If you need SDSUPPORT uncomment it!
|
||||
|
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
||||
|
//#define SDEXTRASLOW // Use even slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
|
||||
|
//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
|
||||
|
//#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
|
||||
|
//#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
|
||||
|
//#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
|
||||
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||
|
//#define SPEAKER // The sound device is a speaker - not a buzzer. A buzzer resonates with his own frequency.
|
||||
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||
|
// 0 to disable buzzer feedback. Test with M300 S<frequency Hz> P<duration ms>
|
||||
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||
|
// http://reprap.org/wiki/PanelOne
|
||||
|
//#define PANEL_ONE
|
||||
|
|
||||
|
// The MaKr3d Makr-Panel with graphic controller and SD support
|
||||
|
// http://reprap.org/wiki/MaKr3d_MaKrPanel
|
||||
|
//#define MAKRPANEL
|
||||
|
|
||||
|
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
|
||||
|
// http://panucatt.com
|
||||
|
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
|
||||
|
//#define VIKI2
|
||||
|
//#define miniVIKI
|
||||
|
|
||||
|
// This is a new controller currently under development. https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
|
||||
|
//
|
||||
|
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
|
||||
|
//#define ELB_FULL_GRAPHIC_CONTROLLER
|
||||
|
//#define SD_DETECT_INVERTED
|
||||
|
|
||||
|
// The RepRapDiscount Smart Controller (white PCB)
|
||||
|
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
|
||||
|
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
|
||||
|
|
||||
|
// The GADGETS3D G3D LCD/SD Controller (blue PCB)
|
||||
|
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
|
||||
|
//#define G3D_PANEL
|
||||
|
|
||||
|
// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
|
||||
|
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
|
//
|
||||
|
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
|
||||
|
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
|
||||
|
// The RepRapWorld REPRAPWORLD_KEYPAD v1.1
|
||||
|
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
|
||||
|
//#define REPRAPWORLD_KEYPAD
|
||||
|
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click
|
||||
|
|
||||
|
// The Elefu RA Board Control Panel
|
||||
|
// http://www.elefu.com/index.php?route=product/product&product_id=53
|
||||
|
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
|
||||
|
//#define RA_CONTROL_PANEL
|
||||
|
|
||||
|
// The MakerLab Mini Panel with graphic controller and SD support
|
||||
|
// http://reprap.org/wiki/Mini_panel
|
||||
|
//#define MINIPANEL
|
||||
|
|
||||
|
// BQ SMART FULL GRAPHIC CONTROLLER
|
||||
|
#define BQ_LCD_SMART_CONTROLLER |
||||
|
|
||||
|
/**
|
||||
|
* I2C Panels |
||||
|
*/ |
||||
|
|
||||
|
//#define LCD_I2C_SAINSMART_YWROBOT
|
||||
|
|
||||
|
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
|
||||
|
//
|
||||
|
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
|
||||
|
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
|
||||
|
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
|
||||
|
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
|
||||
|
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
|
||||
|
//#define LCD_I2C_PANELOLU2
|
||||
|
|
||||
|
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
|
||||
|
//#define LCD_I2C_VIKI
|
||||
|
|
||||
|
// SSD1306 OLED generic display support
|
||||
|
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
|
||||
|
//#define U8GLIB_SSD1306
|
||||
|
|
||||
|
// Shift register panels
|
||||
|
// ---------------------
|
||||
|
// 2 wire Non-latching LCD SR from:
|
||||
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||
|
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
|
||||
|
//#define SAV_3DLCD
|
||||
|
|
||||
|
// @section extras
|
||||
|
|
||||
|
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||
|
//#define FAST_PWM_FAN
|
||||
|
|
||||
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||
|
#define FAN_SOFT_PWM |
||||
|
|
||||
|
// Incrementing this by 1 will double the software PWM frequency,
|
||||
|
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
|
// However, control resolution will be halved for each increment;
|
||||
|
// at zero value, there are 128 effective control positions.
|
||||
|
#define SOFT_PWM_SCALE 0 |
||||
|
|
||||
|
// Temperature status LEDs that display the hotend and bet temperature.
|
||||
|
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
||||
|
// Otherwise the RED led is on. There is 1C hysteresis.
|
||||
|
//#define TEMP_STAT_LEDS
|
||||
|
|
||||
|
// M240 Triggers a camera by emulating a Canon RC-1 Remote
|
||||
|
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
|
||||
|
//#define PHOTOGRAPH_PIN 23
|
||||
|
|
||||
|
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
|
||||
|
//#define SF_ARC_FIX
|
||||
|
|
||||
|
// Support for the BariCUDA Paste Extruder.
|
||||
|
//#define BARICUDA
|
||||
|
|
||||
|
//define BlinkM/CyzRgb Support
|
||||
|
//#define BLINKM
|
||||
|
|
||||
|
/*********************************************************************\
|
||||
|
* R/C SERVO support |
||||
|
* Sponsored by TrinityLabs, Reworked by codexmas |
||||
|
**********************************************************************/ |
||||
|
|
||||
|
// Number of servos
|
||||
|
//
|
||||
|
// If you select a configuration below, this will receive a default value and does not need to be set manually
|
||||
|
// set it manually if you have more servos than extruders and wish to manually control some
|
||||
|
// leaving it undefined or defining as 0 will disable the servo subsystem
|
||||
|
// If unsure, leave commented / disabled
|
||||
|
//
|
||||
|
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
|
||||
|
|
||||
|
// Servo Endstops
|
||||
|
//
|
||||
|
// This allows for servo actuated endstops, primary usage is for the Z Axis to eliminate calibration or bed height changes.
|
||||
|
// Use M851 to set the Z probe vertical offset from the nozzle. Store that setting with M500.
|
||||
|
//
|
||||
|
//#define X_ENDSTOP_SERVO_NR 1
|
||||
|
//#define Y_ENDSTOP_SERVO_NR 2
|
||||
|
//#define Z_ENDSTOP_SERVO_NR 0
|
||||
|
//#define SERVO_ENDSTOP_ANGLES {{0,0}, {0,0}, {70,0}} // X,Y,Z Axis Extend and Retract angles
|
||||
|
|
||||
|
// Servo deactivation
|
||||
|
//
|
||||
|
// With this option servos are powered only during movement, then turned off to prevent jitter.
|
||||
|
//#define DEACTIVATE_SERVOS_AFTER_MOVE
|
||||
|
|
||||
|
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) |
||||
|
// Delay (in microseconds) before turning the servo off. This depends on the servo speed.
|
||||
|
// 300ms is a good value but you can try less delay.
|
||||
|
// If the servo can't reach the requested position, increase it.
|
||||
|
#define SERVO_DEACTIVATION_DELAY 300 |
||||
|
#endif |
||||
|
|
||||
|
/**********************************************************************\
|
||||
|
* Support for a filament diameter sensor |
||||
|
* Also allows adjustment of diameter at print time (vs at slicing) |
||||
|
* Single extruder only at this point (extruder 0) |
||||
|
* |
||||
|
* Motherboards |
||||
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector |
||||
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E) |
||||
|
* 301 - Rambo - uses Analog input 3 |
||||
|
* Note may require analog pins to be defined for different motherboards |
||||
|
**********************************************************************/ |
||||
|
// Uncomment below to enable
|
||||
|
//#define FILAMENT_SENSOR
|
||||
|
|
||||
|
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 //The number of the extruder that has the filament sensor (0,1,2)
|
||||
|
#define MEASUREMENT_DELAY_CM 14 //measurement delay in cm. This is the distance from filament sensor to middle of barrel
|
||||
|
|
||||
|
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation
|
||||
|
#define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm
|
||||
|
#define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm
|
||||
|
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
||||
|
|
||||
|
//defines used in the code
|
||||
|
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
||||
|
|
||||
|
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
||||
|
//#define FILAMENT_LCD_DISPLAY
|
||||
|
|
||||
|
#include "Configuration_adv.h" |
||||
|
#include "thermistortables.h" |
||||
|
|
||||
|
#endif //CONFIGURATION_H
|
||||
@ -0,0 +1,603 @@ |
|||||
|
#ifndef CONFIGURATION_ADV_H |
||||
|
#define CONFIGURATION_ADV_H |
||||
|
|
||||
|
#include "Conditionals.h" |
||||
|
|
||||
|
// @section temperature
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//=============================Thermal Settings ============================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
#if ENABLED(BED_LIMIT_SWITCHING) |
||||
|
#define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
|
||||
|
#endif |
||||
|
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
|
||||
|
|
||||
|
/**
|
||||
|
* Thermal Protection parameters |
||||
|
*/ |
||||
|
#if ENABLED(THERMAL_PROTECTION_HOTENDS) |
||||
|
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
|
||||
|
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
|
|
||||
|
/**
|
||||
|
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the |
||||
|
* WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE |
||||
|
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, |
||||
|
* but only if the current temperature is far enough below the target for a reliable test. |
||||
|
*/ |
||||
|
#define WATCH_TEMP_PERIOD 16 // Seconds
|
||||
|
#define WATCH_TEMP_INCREASE 4 // Degrees Celsius
|
||||
|
#endif |
||||
|
|
||||
|
#if ENABLED(THERMAL_PROTECTION_BED) |
||||
|
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
|
||||
|
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
|
||||
|
#endif |
||||
|
|
||||
|
#if ENABLED(PIDTEMP) |
||||
|
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
|
||||
|
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
|
||||
|
#define PID_ADD_EXTRUSION_RATE |
||||
|
#if ENABLED(PID_ADD_EXTRUSION_RATE) |
||||
|
#define DEFAULT_Kc (1) //heating power=Kc*(e_speed)
|
||||
|
#define LPQ_MAX_LEN 50 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
/**
|
||||
|
* Automatic Temperature: |
||||
|
* The hotend target temperature is calculated by all the buffered lines of gcode. |
||||
|
* The maximum buffered steps/sec of the extruder motor is called "se". |
||||
|
* Start autotemp mode with M109 S<mintemp> B<maxtemp> F<factor> |
||||
|
* The target temperature is set to mintemp+factor*se[steps/sec] and is limited by |
||||
|
* mintemp and maxtemp. Turn this off by excuting M109 without F* |
||||
|
* Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. |
||||
|
* On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode |
||||
|
*/ |
||||
|
#define AUTOTEMP |
||||
|
#if ENABLED(AUTOTEMP) |
||||
|
#define AUTOTEMP_OLDWEIGHT 0.98 |
||||
|
#endif |
||||
|
|
||||
|
//Show Temperature ADC value
|
||||
|
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
||||
|
//#define SHOW_TEMP_ADC_VALUES
|
||||
|
|
||||
|
// @section extruder
|
||||
|
|
||||
|
// extruder run-out prevention.
|
||||
|
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
||||
|
//#define EXTRUDER_RUNOUT_PREVENT
|
||||
|
#define EXTRUDER_RUNOUT_MINTEMP 190 |
||||
|
#define EXTRUDER_RUNOUT_SECONDS 30. |
||||
|
#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
|
||||
|
#define EXTRUDER_RUNOUT_SPEED 1500. //extrusion speed
|
||||
|
#define EXTRUDER_RUNOUT_EXTRUDE 100 |
||||
|
|
||||
|
// @section temperature
|
||||
|
|
||||
|
//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
|
||||
|
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
|
||||
|
#define TEMP_SENSOR_AD595_OFFSET 0.0 |
||||
|
#define TEMP_SENSOR_AD595_GAIN 1.0 |
||||
|
|
||||
|
//This is for controlling a fan to cool down the stepper drivers
|
||||
|
//it will turn on when any driver is enabled
|
||||
|
//and turn off after the set amount of seconds from last driver being disabled again
|
||||
|
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable)
|
||||
|
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
|
||||
|
#define CONTROLLERFAN_SPEED 255 // == full speed
|
||||
|
|
||||
|
// When first starting the main fan, run it at full speed for the
|
||||
|
// given number of milliseconds. This gets the fan spinning reliably
|
||||
|
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
||||
|
//#define FAN_KICKSTART_TIME 100
|
||||
|
|
||||
|
// This defines the minimal speed for the main fan, run in PWM mode
|
||||
|
// to enable uncomment and set minimal PWM speed for reliable running (1-255)
|
||||
|
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
|
||||
|
//#define FAN_MIN_PWM 50
|
||||
|
|
||||
|
// @section extruder
|
||||
|
|
||||
|
// Extruder cooling fans
|
||||
|
// Configure fan pin outputs to automatically turn on/off when the associated
|
||||
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||
|
// Multiple extruders can be assigned to the same pin in which case
|
||||
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||
|
#define EXTRUDER_0_AUTO_FAN_PIN 11 |
||||
|
#define EXTRUDER_1_AUTO_FAN_PIN 6 |
||||
|
#define EXTRUDER_2_AUTO_FAN_PIN -1 |
||||
|
#define EXTRUDER_3_AUTO_FAN_PIN -1 |
||||
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 |
||||
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//=============================Mechanical Settings===========================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
// @section homing
|
||||
|
|
||||
|
#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
|
||||
|
|
||||
|
// @section extras
|
||||
|
|
||||
|
//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
|
||||
|
|
||||
|
// A single Z stepper driver is usually used to drive 2 stepper motors.
|
||||
|
// Uncomment this define to utilize a separate stepper driver for each Z axis motor.
|
||||
|
// Only a few motherboards support this, like RAMPS, which have dual extruder support (the 2nd, often unused, extruder driver is used
|
||||
|
// to control the 2nd Z axis stepper motor). The pins are currently only defined for a RAMPS motherboards.
|
||||
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||
|
|
||||
|
#if ENABLED(Z_DUAL_STEPPER_DRIVERS) |
||||
|
|
||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||
|
|
||||
|
//#define Z_DUAL_ENDSTOPS
|
||||
|
|
||||
|
#if ENABLED(Z_DUAL_ENDSTOPS) |
||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false; |
||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||
|
#endif |
||||
|
|
||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||
|
|
||||
|
// Same again but for Y Axis.
|
||||
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||
|
|
||||
|
#if ENABLED(Y_DUAL_STEPPER_DRIVERS) |
||||
|
// Define if the two Y drives need to rotate in opposite directions
|
||||
|
#define INVERT_Y2_VS_Y_DIR true |
||||
|
#endif |
||||
|
|
||||
|
// Enable this for dual x-carriage printers.
|
||||
|
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
||||
|
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
||||
|
// allowing faster printing speeds.
|
||||
|
//#define DUAL_X_CARRIAGE
|
||||
|
#if ENABLED(DUAL_X_CARRIAGE) |
||||
|
// Configuration for second X-carriage
|
||||
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||
|
// the second x-carriage always homes to the maximum endstop.
|
||||
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||
|
|
||||
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||
|
#define X2_ENABLE_PIN 29 |
||||
|
#define X2_STEP_PIN 25 |
||||
|
#define X2_DIR_PIN 23 |
||||
|
|
||||
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||
|
// that additional slicer support is not required. (M605 S1)
|
||||
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||
|
|
||||
|
// This is the default power-up mode which can be later using M605.
|
||||
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0 |
||||
|
|
||||
|
// Default settings in "Auto-park Mode"
|
||||
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||
|
|
||||
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||
|
#define DEFAULT_DUPLICATION_X_OFFSET 100 |
||||
|
|
||||
|
#endif //DUAL_X_CARRIAGE
|
||||
|
|
||||
|
// @section homing
|
||||
|
|
||||
|
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||
|
#define X_HOME_BUMP_MM 5 |
||||
|
#define Y_HOME_BUMP_MM 5 |
||||
|
#define Z_HOME_BUMP_MM 2 |
||||
|
#define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||
|
|
||||
|
// When G28 is called, this option will make Y home before X
|
||||
|
//#define HOME_Y_BEFORE_X
|
||||
|
|
||||
|
// @section machine
|
||||
|
|
||||
|
#define AXIS_RELATIVE_MODES {false, false, false, false} |
||||
|
|
||||
|
// @section machine
|
||||
|
|
||||
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||
|
#define INVERT_X_STEP_PIN false |
||||
|
#define INVERT_Y_STEP_PIN false |
||||
|
#define INVERT_Z_STEP_PIN false |
||||
|
#define INVERT_E_STEP_PIN false |
||||
|
|
||||
|
// Default stepper release if idle. Set to 0 to deactivate.
|
||||
|
#define DEFAULT_STEPPER_DEACTIVE_TIME 60 |
||||
|
|
||||
|
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
|
||||
|
#define DEFAULT_MINTRAVELFEEDRATE 0.0 |
||||
|
|
||||
|
// @section lcd
|
||||
|
|
||||
|
#if ENABLED(ULTIPANEL) |
||||
|
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
|
||||
|
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
|
||||
|
#endif |
||||
|
|
||||
|
// @section extras
|
||||
|
|
||||
|
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
||||
|
#define DEFAULT_MINSEGMENTTIME 20000 |
||||
|
|
||||
|
// If defined the movements slow down when the look ahead buffer is only half full
|
||||
|
#define SLOWDOWN |
||||
|
|
||||
|
// Frequency limit
|
||||
|
// See nophead's blog for more info
|
||||
|
// Not working O
|
||||
|
//#define XY_FREQUENCY_LIMIT 15
|
||||
|
|
||||
|
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
|
||||
|
// of the buffer and all stops. This should not be much greater than zero and should only be changed
|
||||
|
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
|
||||
|
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
|
||||
|
|
||||
|
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
|
||||
|
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
|
||||
|
|
||||
|
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
|
||||
|
#define DIGIPOT_MOTOR_CURRENT {150, 170, 180, 190, 180} // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A])
|
||||
|
|
||||
|
// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||
|
//#define DIGIPOT_I2C
|
||||
|
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
||||
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 |
||||
|
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} |
||||
|
|
||||
|
//===========================================================================
|
||||
|
//=============================Additional Features===========================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||
|
|
||||
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||
|
|
||||
|
// @section lcd
|
||||
|
|
||||
|
#if ENABLED(SDSUPPORT) |
||||
|
|
||||
|
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
// around this by connecting a push button or single throw switch to the pin defined
|
||||
|
// as SD_DETECT_PIN in your board's pins definitions.
|
||||
|
// This setting should be disabled unless you are using a push button, pulling the pin to ground.
|
||||
|
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
|
||||
|
#define SD_DETECT_INVERTED |
||||
|
|
||||
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||
|
|
||||
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||
|
// using:
|
||||
|
#define MENU_ADDAUTOSTART |
||||
|
|
||||
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||
|
//#define LCD_PROGRESS_BAR
|
||||
|
|
||||
|
#if ENABLED(LCD_PROGRESS_BAR) |
||||
|
// Amount of time (ms) to show the bar
|
||||
|
#define PROGRESS_BAR_BAR_TIME 2000 |
||||
|
// Amount of time (ms) to show the status message
|
||||
|
#define PROGRESS_BAR_MSG_TIME 3000 |
||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||
|
#define PROGRESS_MSG_EXPIRE 0 |
||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||
|
//#define PROGRESS_MSG_ONCE
|
||||
|
#endif |
||||
|
|
||||
|
// This allows hosts to request long names for files and folders with M33
|
||||
|
#define LONG_FILENAME_HOST_SUPPORT |
||||
|
|
||||
|
// This option allows you to abort SD printing when any endstop is triggered.
|
||||
|
// This feature must be enabled with "M540 S1" or from the LCD menu.
|
||||
|
// To have any effect, endstops must be enabled during SD printing.
|
||||
|
// With ENDSTOPS_ONLY_FOR_HOMING you must send "M120" to enable endstops.
|
||||
|
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||
|
|
||||
|
#endif // SDSUPPORT
|
||||
|
|
||||
|
// for dogm lcd displays you can choose some additional fonts:
|
||||
|
#if ENABLED(DOGLCD) |
||||
|
// save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
|
||||
|
// we don't have a big font for Cyrillic, Kana
|
||||
|
//#define USE_BIG_EDIT_FONT
|
||||
|
|
||||
|
// If you have spare 2300Byte of progmem and want to use a
|
||||
|
// smaller font on the Info-screen uncomment the next line.
|
||||
|
#define USE_SMALL_INFOFONT |
||||
|
#endif // DOGLCD
|
||||
|
|
||||
|
// @section more
|
||||
|
|
||||
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||
|
#define USE_WATCHDOG |
||||
|
|
||||
|
#if ENABLED(USE_WATCHDOG) |
||||
|
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
||||
|
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
|
||||
|
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
|
||||
|
//#define WATCHDOG_RESET_MANUAL
|
||||
|
#endif |
||||
|
|
||||
|
// @section lcd
|
||||
|
|
||||
|
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
||||
|
// it can e.g. be used to change z-positions in the print startup phase in real-time
|
||||
|
// does not respect endstops!
|
||||
|
//#define BABYSTEPPING
|
||||
|
#if ENABLED(BABYSTEPPING) |
||||
|
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
||||
|
//not implemented for CoreXY and deltabots!
|
||||
|
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
||||
|
#define BABYSTEP_MULTIPLICATOR 1 //faster movements
|
||||
|
#endif |
||||
|
|
||||
|
// @section extruder
|
||||
|
|
||||
|
// extruder advance constant (s2/mm3)
|
||||
|
//
|
||||
|
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
|
||||
|
//
|
||||
|
// Hooke's law says: force = k * distance
|
||||
|
// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
|
||||
|
// so: v ^ 2 is proportional to number of steps we advance the extruder
|
||||
|
//#define ADVANCE
|
||||
|
|
||||
|
#if ENABLED(ADVANCE) |
||||
|
#define EXTRUDER_ADVANCE_K .0 |
||||
|
#define D_FILAMENT 2.85 |
||||
|
#define STEPS_MM_E 836 |
||||
|
#endif |
||||
|
|
||||
|
// @section extras
|
||||
|
|
||||
|
// Arc interpretation settings:
|
||||
|
#define MM_PER_ARC_SEGMENT 1 |
||||
|
#define N_ARC_CORRECTION 25 |
||||
|
|
||||
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||
|
|
||||
|
// @section temperature
|
||||
|
|
||||
|
// Control heater 0 and heater 1 in parallel.
|
||||
|
//#define HEATERS_PARALLEL
|
||||
|
|
||||
|
//===========================================================================
|
||||
|
//================================= Buffers =================================
|
||||
|
//===========================================================================
|
||||
|
|
||||
|
// @section hidden
|
||||
|
|
||||
|
// The number of linear motions that can be in the plan at any give time.
|
||||
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||
|
#if ENABLED(SDSUPPORT) |
||||
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
|
#else |
||||
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||
|
#endif |
||||
|
|
||||
|
// @section more
|
||||
|
|
||||
|
//The ASCII buffer for receiving from the serial:
|
||||
|
#define MAX_CMD_SIZE 96 |
||||
|
#define BUFSIZE 4 |
||||
|
|
||||
|
// Bad Serial-connections can miss a received command by sending an 'ok'
|
||||
|
// Therefore some clients abort after 30 seconds in a timeout.
|
||||
|
// Some other clients start sending commands while receiving a 'wait'.
|
||||
|
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
|
||||
|
//#define NO_TIMEOUTS 1000 // Milliseconds
|
||||
|
|
||||
|
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
|
//#define ADVANCED_OK
|
||||
|
|
||||
|
// @section fwretract
|
||||
|
|
||||
|
// Firmware based and LCD controlled retract
|
||||
|
// M207 and M208 can be used to define parameters for the retraction.
|
||||
|
// The retraction can be called by the slicer using G10 and G11
|
||||
|
// until then, intended retractions can be detected by moves that only extrude and the direction.
|
||||
|
// the moves are than replaced by the firmware controlled ones.
|
||||
|
|
||||
|
//#define FWRETRACT //ONLY PARTIALLY TESTED
|
||||
|
#if ENABLED(FWRETRACT) |
||||
|
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||
|
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
||||
|
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
||||
|
#define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
|
||||
|
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
||||
|
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
||||
|
#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||
|
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
||||
|
#endif |
||||
|
|
||||
|
// Add support for experimental filament exchange support M600; requires display
|
||||
|
#if ENABLED(ULTIPANEL) |
||||
|
//#define FILAMENTCHANGEENABLE
|
||||
|
#if ENABLED(FILAMENTCHANGEENABLE) |
||||
|
#define FILAMENTCHANGE_XPOS 3 |
||||
|
#define FILAMENTCHANGE_YPOS 3 |
||||
|
#define FILAMENTCHANGE_ZADD 10 |
||||
|
#define FILAMENTCHANGE_FIRSTRETRACT -2 |
||||
|
#define FILAMENTCHANGE_FINALRETRACT -100 |
||||
|
#define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD
|
||||
|
#define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop
|
||||
|
#define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop
|
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
/******************************************************************************\
|
||||
|
* enable this section if you have TMC26X motor drivers. |
||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this |
||||
|
******************************************************************************/ |
||||
|
|
||||
|
// @section tmc
|
||||
|
|
||||
|
//#define HAVE_TMCDRIVER
|
||||
|
#if ENABLED(HAVE_TMCDRIVER) |
||||
|
|
||||
|
//#define X_IS_TMC
|
||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define X2_IS_TMC
|
||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define Y_IS_TMC
|
||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define Y2_IS_TMC
|
||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define Z_IS_TMC
|
||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define Z2_IS_TMC
|
||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define E0_IS_TMC
|
||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define E1_IS_TMC
|
||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define E2_IS_TMC
|
||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
//#define E3_IS_TMC
|
||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||
|
|
||||
|
#endif |
||||
|
|
||||
|
/******************************************************************************\
|
||||
|
* enable this section if you have L6470 motor drivers. |
||||
|
* you need to import the L6470 library into the arduino IDE for this |
||||
|
******************************************************************************/ |
||||
|
|
||||
|
// @section l6470
|
||||
|
|
||||
|
//#define HAVE_L6470DRIVER
|
||||
|
#if ENABLED(HAVE_L6470DRIVER) |
||||
|
|
||||
|
//#define X_IS_L6470
|
||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define X2_IS_L6470
|
||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define Y_IS_L6470
|
||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define Y2_IS_L6470
|
||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define Z_IS_L6470
|
||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define Z2_IS_L6470
|
||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define E0_IS_L6470
|
||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define E1_IS_L6470
|
||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define E2_IS_L6470
|
||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
//#define E3_IS_L6470
|
||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||
|
|
||||
|
#endif |
||||
|
|
||||
|
#include "Conditionals.h" |
||||
|
#include "SanityCheck.h" |
||||
|
|
||||
|
#endif //CONFIGURATION_ADV_H
|
||||
@ -0,0 +1,81 @@ |
|||||
|
/**
|
||||
|
* bq ZUM Mega 3D board definition |
||||
|
*/ |
||||
|
|
||||
|
#ifndef __AVR_ATmega2560__ |
||||
|
#error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu. |
||||
|
#endif |
||||
|
|
||||
|
#define LARGE_FLASH true |
||||
|
|
||||
|
#define LED_PIN 13 |
||||
|
|
||||
|
#define X_STEP_PIN 54 |
||||
|
#define X_DIR_PIN 55 |
||||
|
#define X_ENABLE_PIN 38 |
||||
|
#define X_MIN_PIN 3 |
||||
|
#define X_MAX_PIN 79 |
||||
|
|
||||
|
#define Y_STEP_PIN 60 |
||||
|
#define Y_DIR_PIN 61 |
||||
|
#define Y_ENABLE_PIN 56 |
||||
|
#define Y_MIN_PIN 14 |
||||
|
#define Y_MAX_PIN 15 |
||||
|
|
||||
|
#define Z_STEP_PIN 46 |
||||
|
#define Z_DIR_PIN 48 |
||||
|
#define Z_ENABLE_PIN 77 |
||||
|
#define Z_MIN_PIN 18 // Z-MIN Label
|
||||
|
#define Z_MAX_PIN 19 // IND_S_5V
|
||||
|
|
||||
|
#define E0_STEP_PIN 26 |
||||
|
#define E0_DIR_PIN 28 |
||||
|
#define E0_ENABLE_PIN 24 |
||||
|
|
||||
|
#define E1_STEP_PIN 36 |
||||
|
#define E1_DIR_PIN 34 |
||||
|
#define E1_ENABLE_PIN 30 |
||||
|
|
||||
|
#define FAN_PIN 12 |
||||
|
#define HEATER_0_PIN 9 |
||||
|
#define TEMP_0_PIN 13 |
||||
|
|
||||
|
#define FAN1_PIN 7 |
||||
|
#define HEATER_1_PIN 10 |
||||
|
#define TEMP_1_PIN 14 |
||||
|
|
||||
|
#define HEATER_BED_PIN 8 |
||||
|
#define TEMP_BED_PIN 15 |
||||
|
|
||||
|
#undef DIGIPOTSS_PIN |
||||
|
#define DIGIPOTSS_PIN 22 |
||||
|
#define DIGIPOT_CHANNELS { 4, 5, 3 , 0, 1 } |
||||
|
|
||||
|
#define PS_ON_PIN 81 // External Power Supply
|
||||
|
|
||||
|
#if ENABLED(BQ_LCD_SMART_CONTROLLER) |
||||
|
#define KILL_PIN 41 |
||||
|
|
||||
|
#define LCD_PIN_BL 39 |
||||
|
#define LCD_PINS_RS 16 |
||||
|
#define LCD_PINS_ENABLE 17 |
||||
|
#define LCD_PINS_D4 23 |
||||
|
|
||||
|
#define BTN_EN1 31 |
||||
|
#define BTN_EN2 33 |
||||
|
#define BTN_ENC 35 |
||||
|
|
||||
|
#define BEEPER_PIN 37 |
||||
|
|
||||
|
#define SDPOWER -1 |
||||
|
#define SDSS 53 |
||||
|
#define SD_DETECT_PIN 49 |
||||
|
#endif |
||||
|
|
||||
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE) |
||||
|
#undef Z_MIN_PIN |
||||
|
#undef Z_MAX_PIN |
||||
|
|
||||
|
#define Z_MIN_PIN 19 // IND_S_5V
|
||||
|
#define Z_MAX_PIN 18 // Z-MIN Label
|
||||
|
#endif |
||||
Loading…
Reference in new issue