Browse Source

tested

add sort alpha section to other LPC1768 boards
pull/1/head
Bob-the-Kuhn 7 years ago
parent
commit
b7a66742dd
  1. 4
      Marlin/src/lcd/ultralcd.cpp
  2. 24
      Marlin/src/pins/pins_AZSMZ_MINI.h
  3. 19
      Marlin/src/pins/pins_MKS_SBASE.h
  4. 18
      Marlin/src/pins/pins_RAMPS_RE_ARM.h
  5. 3
      Marlin/src/sd/SdFatConfig.h
  6. 4
      Marlin/src/sd/cardreader.cpp

4
Marlin/src/lcd/ultralcd.cpp

@ -3775,7 +3775,9 @@ void kill_screen(const char* lcd_msg) {
void lcd_sdcard_menu() {
ENCODER_DIRECTION_MENUS();
const uint16_t fileCnt = card.getnrfilenames();
const uint16_t fileCnt = card.get_num_Files(); // Only access SD card if sort not active
// This minimizes garbage on RepRap Discount Full Graphics Smart Controller
// when using the Re-ARM card.
START_MENU();
MENU_BACK(MSG_MAIN);
card.getWorkDirName();

24
Marlin/src/pins/pins_AZSMZ_MINI.h

@ -24,9 +24,8 @@
* AZSMZ MINI pin assignments
*/
//#if !defined(TARGET_LPC1768)
#if DISABLED(IS_REARM)
#error "Oops! Make sure you have Re-Arm selected."
#ifndef TARGET_LPC1768
#error "Oops! Make sure you have LPC1768 selected."
#endif
#ifndef BOARD_NAME
@ -113,6 +112,25 @@
#define ENET_TXD0 78
#define ENET_TXD1 79
#if (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && !defined(SDCARD_SORT_ALPHA)) // needed because of shared SPI
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
// When going up/down directory levels the SD card is
// accessed but the garbage/lines are removed when the
// LCD updates
#define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each.
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#define MAX_VFAT_ENTRIES SDSORT_CACHE_VFATS
#endif
/**
* PWMs
*

19
Marlin/src/pins/pins_MKS_SBASE.h

@ -174,6 +174,25 @@
#define ENET_TXD0 P1_0 // J12-11
#define ENET_TXD1 P1_1 // J12-12
#if (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && !defined(SDCARD_SORT_ALPHA)) // needed because of shared SPI
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
// When going up/down directory levels the SD card is
// accessed but the garbage/lines are removed when the
// LCD updates
#define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each.
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#define MAX_VFAT_ENTRIES SDSORT_CACHE_VFATS
#endif
/**
* PWMs
*

18
Marlin/src/pins/pins_RAMPS_RE_ARM.h

@ -259,6 +259,24 @@
//#define SHIFT_EN P1_22 // J5-4 & AUX-4
#endif
#if (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && !defined(SDCARD_SORT_ALPHA)) // needed because of shared SPI
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
// When going up/down directory levels the SD card is
// accessed but the garbage/lines are removed when the
// LCD updates
#define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each.
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#define MAX_VFAT_ENTRIES SDSORT_CACHE_VFATS
#endif
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
// #define LCD_SCREEN_ROT_180

3
Marlin/src/sd/SdFatConfig.h

@ -134,6 +134,9 @@
#define FILENAME_LENGTH 13 // Number of UTF-16 characters per entry
// Number of VFAT entries used. Each entry has 13 UTF-16 characters
#ifdef MAX_VFAT_ENTRIES
#undef MAX_VFAT_ENTRIES
#endif
#if ENABLED(SCROLL_LONG_FILENAMES)
#define MAX_VFAT_ENTRIES (5)
#else

4
Marlin/src/sd/cardreader.cpp

@ -747,7 +747,7 @@ void CardReader::updir() {
strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0';
#else
strcpy(sortnames[i], SORTED_LONGNAME_MAXLEN);
strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
#endif
#if ENABLED(SDSORT_CACHE_NAMES)
strcpy(sortshort[i], filename);
@ -849,7 +849,7 @@ void CardReader::updir() {
strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0';
#else
strcpy(sortnames[0], SORTED_LONGNAME_MAXLEN);
strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
#endif
#if ENABLED(SDSORT_CACHE_NAMES)
strcpy(sortshort[0], filename);

Loading…
Cancel
Save