diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp
index 8a4f5ae071..1acd26f331 100644
--- a/Marlin/src/feature/mmu/mmu2.cpp
+++ b/Marlin/src/feature/mmu/mmu2.cpp
@@ -75,7 +75,7 @@ MMU2 mmu2;
 #define MMU2_NO_TOOL 99
 #define MMU_BAUD    115200
 
-bool MMU2::enabled, MMU2::ready, MMU2::mmu_print_saved;
+bool MMU2::_enabled, MMU2::ready, MMU2::mmu_print_saved;
 #if HAS_PRUSA_MMU2S
   bool MMU2::mmu2s_triggered;
 #endif
@@ -219,7 +219,7 @@ void MMU2::mmu_loop() {
 
         DEBUG_ECHOLNPAIR("MMU => ", finda, "\nMMU - ENABLED");
 
-        enabled = true;
+        _enabled = true;
         state = 1;
         TERN_(HAS_PRUSA_MMU2S, mmu2s_triggered = false);
       }
@@ -480,7 +480,7 @@ static void mmu2_not_responding() {
    */
   void MMU2::tool_change(const uint8_t index) {
 
-    if (!enabled) return;
+    if (!_enabled) return;
 
     set_runout_valid(false);
 
@@ -512,7 +512,7 @@ static void mmu2_not_responding() {
    * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
    */
   void MMU2::tool_change(const char *special) {
-      if (!enabled) return;
+      if (!_enabled) return;
 
       set_runout_valid(false);
 
@@ -561,7 +561,7 @@ static void mmu2_not_responding() {
    * Handle tool change
    */
   void MMU2::tool_change(const uint8_t index) {
-    if (!enabled) return;
+    if (!_enabled) return;
 
     set_runout_valid(false);
 
@@ -599,7 +599,7 @@ static void mmu2_not_responding() {
    * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
    */
   void MMU2::tool_change(const char *special) {
-    if (!enabled) return;
+    if (!_enabled) return;
 
     set_runout_valid(false);
 
@@ -665,7 +665,7 @@ static void mmu2_not_responding() {
    * Handle tool change
    */
   void MMU2::tool_change(const uint8_t index) {
-    if (!enabled) return;
+    if (!_enabled) return;
 
     set_runout_valid(false);
 
@@ -693,7 +693,7 @@ static void mmu2_not_responding() {
    * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
    */
   void MMU2::tool_change(const char *special) {
-    if (!enabled) return;
+    if (!_enabled) return;
 
     set_runout_valid(false);
 
@@ -744,7 +744,7 @@ static void mmu2_not_responding() {
  * Set next command
  */
 void MMU2::command(const uint8_t mmu_cmd) {
-  if (!enabled) return;
+  if (!_enabled) return;
   cmd = mmu_cmd;
   ready = false;
 }
@@ -833,7 +833,7 @@ void MMU2::manage_response(const bool move_axes, const bool turn_off_nozzle) {
 }
 
 void MMU2::set_filament_type(const uint8_t index, const uint8_t filamentType) {
-  if (!enabled) return;
+  if (!_enabled) return;
 
   cmd_arg = filamentType;
   command(MMU_CMD_F0 + index);
@@ -892,7 +892,7 @@ void MMU2::filament_runout() {
 
 // Load filament into MMU2
 void MMU2::load_filament(const uint8_t index) {
-  if (!enabled) return;
+  if (!_enabled) return;
 
   command(MMU_CMD_L0 + index);
   manage_response(false, false);
@@ -904,7 +904,7 @@ void MMU2::load_filament(const uint8_t index) {
  */
 bool MMU2::load_filament_to_nozzle(const uint8_t index) {
 
-  if (!enabled) return false;
+  if (!_enabled) return false;
 
   if (thermalManager.tooColdToExtrude(active_extruder)) {
     BUZZ(200, 404);
@@ -940,7 +940,7 @@ void MMU2::load_to_nozzle() {
 
 bool MMU2::eject_filament(const uint8_t index, const bool recover) {
 
-  if (!enabled) return false;
+  if (!_enabled) return false;
 
   if (thermalManager.tooColdToExtrude(active_extruder)) {
     BUZZ(200, 404);
@@ -989,7 +989,7 @@ bool MMU2::eject_filament(const uint8_t index, const bool recover) {
  */
 bool MMU2::unload() {
 
-  if (!enabled) return false;
+  if (!_enabled) return false;
 
   if (thermalManager.tooColdToExtrude(active_extruder)) {
     BUZZ(200, 404);
diff --git a/Marlin/src/feature/mmu/mmu2.h b/Marlin/src/feature/mmu/mmu2.h
index 079a6ef79a..95338a5184 100644
--- a/Marlin/src/feature/mmu/mmu2.h
+++ b/Marlin/src/feature/mmu/mmu2.h
@@ -43,6 +43,7 @@ public:
 
   static void init();
   static void reset();
+  static inline bool enabled() { return _enabled; }
   static void mmu_loop();
   static void tool_change(const uint8_t index);
   static void tool_change(const char *special);
@@ -88,7 +89,7 @@ private:
     static void mmu_continue_loading();
   #endif
 
-  static bool enabled, ready, mmu_print_saved;
+  static bool _enabled, ready, mmu_print_saved;
 
   static uint8_t cmd, cmd_arg, last_cmd, extruder;
   static int8_t state;
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
index bc47c9169f..b5d02942f3 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
@@ -166,7 +166,7 @@
     #define DOGLCD_SCK                      PB13
     #define FORCE_SOFT_SPI
     #define SOFTWARE_SPI
-    
+
   #else
 
     #define LCD_PINS_D4                     PA6