andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

✨ MKS TinyBee board support (#23340) 

Co-Authored-By: Sola <42537573+solawc@users.noreply.github.com>
vanilla_fb_2.0.x
Sola 3 years ago
committed by Scott Lahteine
parent
aef613acd3
commit
b4f0922a7c
4 changed files with 215 additions and 0 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 1
      Marlin/src/core/boards.h
  2. 207
      Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
  3. 2
      Marlin/src/pins/pins.h
  4. 5
      ini/esp32.ini

1
Marlin/src/core/boards.h
View File

@ -433,6 +433,7 @@
#define BOARD_FYSETC_E4 6005 // FYSETC E4
#define BOARD_PANDA_ZHU 6006 // Panda_ZHU
#define BOARD_PANDA_M4 6007 // Panda_M4
#define BOARD_MKS_TINYBEE 6008 // MKS TinyBee based on ESP32 (with I2S stepper stream)
//
// SAMD51 ARM Cortex M4

207
Marlin/src/pins/esp32/pins_MKS_TINYBEE.h
View File

@ -0,0 +1,207 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MRR ESPE pin assignments
* MRR ESPE is a 3D printer control board based on the ESP32 microcontroller.
* Supports 5 stepper drivers (using I2S stepper stream), heated bed,
* single hotend, and LCD controller.
*/
#include "env_validate.h"
#if EXTRUDERS > 2 || E_STEPPERS > 2
#error "MKS ESP Nano only supports two E Steppers. Comment out this line to continue."
#elif HOTENDS > 2
#error "MKS ESP Nano only supports two hotend / E-stepper. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "MKS TinyBee"
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos
//
#define SERVO0_PIN 2
//
// Limit Switches
//
#define X_STOP_PIN 33
#define Y_STOP_PIN 32
#define Z_STOP_PIN 22
//#define FIL_RUNOUT_PIN 35
//
// Enable I2S stepper stream
//
#define I2S_STEPPER_STREAM
#if ENABLED(I2S_STEPPER_STREAM)
#define I2S_WS 26
#define I2S_BCK 25
#define I2S_DATA 27
#if ENABLED(LIN_ADVANCE)
#error "I2S stream is currently incompatible with LIN_ADVANCE."
#endif
#endif
//
// Steppers
//
#define X_STEP_PIN 129
#define X_DIR_PIN 130
#define X_ENABLE_PIN 128
#define Y_STEP_PIN 132
#define Y_DIR_PIN 133
#define Y_ENABLE_PIN 131
#define Z_STEP_PIN 135
#define Z_DIR_PIN 136
#define Z_ENABLE_PIN 134
#define E0_STEP_PIN 138
#define E0_DIR_PIN 139
#define E0_ENABLE_PIN 137
#define E1_STEP_PIN 141
#define E1_DIR_PIN 142
#define E1_ENABLE_PIN 140
#define Z2_STEP_PIN 141
#define Z2_DIR_PIN 142
#define Z2_ENABLE_PIN 140
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_1_PIN 34 // Analog Input, you need set R6=0Ω and R7=NC
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 145
#define HEATER_1_PIN 146
#define FAN_PIN 147
#define FAN1_PIN 148
#define HEATER_BED_PIN 144
//#define CONTROLLER_FAN_PIN 148
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
//
// MicroSD card
//
#define SD_MOSI_PIN 23
#define SD_MISO_PIN 19
#define SD_SCK_PIN 18
#define SDSS 5
#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal(Jump to SDDET)
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
/**
* ------ ------
* (BEEPER) 149 |10 9 | 13 (BTN_ENC) (SPI MISO) 19 |10 9 | 18 (SPI SCK)
* (LCD_EN) 21 | 8 7 | 4 (LCD_RS) (BTN_EN1) 14 | 8 7 | 5 (SPI CS)
* (LCD_D4) 0 | 6 5 16 (LCD_D5) (BTN_EN2) 12 | 6 5 23 (SPI MOSI)
* (LCD_D6) 15 | 4 3 | 17 (LCD_D7) (SPI_DET) 34 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN 17
#define EXP1_04_PIN 15
#define EXP1_05_PIN 16
#define EXP1_06_PIN 0
#define EXP1_07_PIN 4
#define EXP1_08_PIN 21
#define EXP1_09_PIN 13
#define EXP1_10_PIN 149
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN 34
#define EXP2_05_PIN 23
#define EXP2_06_PIN 12
#define EXP2_07_PIN 5
#define EXP2_08_PIN 14
#define EXP2_09_PIN 18
#define EXP2_10_PIN 19
#if HAS_WIRED_LCD
#define BEEPER_PIN 149
#define BTN_ENC 13
#define LCD_PINS_ENABLE 21
#define LCD_PINS_RS 4
#define BTN_EN1 14
#define BTN_EN2 12
#define LCD_BACKLIGHT_PIN -1
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
#if ENABLED(MKS_MINI_12864)
//#define LCD_BACKLIGHT_PIN -1
//#define LCD_RESET_PIN -1
#define DOGLCD_A0 15
#define DOGLCD_CS 16
//#define DOGLCD_SCK 19
//#define DOGLCD_MOSI 23
// Required for MKS_MINI_12864 with this board
//#define MKS_LCD12864B
#elif ENABLED(MKS_MINI_12864_V3)
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
#define LCD_PINS_DC DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI
#endif
#else // !MKS_MINI_12864
#define LCD_PINS_D4 0
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_D5 16
#define LCD_PINS_D6 15
#define LCD_PINS_D7 17
#endif
#define BOARD_ST7920_DELAY_1 96
#define BOARD_ST7920_DELAY_2 48
#define BOARD_ST7920_DELAY_3 600
#endif // !MKS_MINI_12864
#endif // HAS_WIRED_LCD

2
Marlin/src/pins/pins.h
View File

@ -711,6 +711,8 @@
#include "esp32/pins_PANDA_ZHU.h" // ESP32 env:PANDA
#elif MB(PANDA_M4)
#include "esp32/pins_PANDA_M4.h" // ESP32 env:PANDA
#elif MB(MKS_TINYBEE)
#include "esp32/pins_MKS_TINYBEE.h" // ESP32 env:mks_tinybee
//
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)

5
ini/esp32.ini
View File

@ -37,3 +37,8 @@ lib_deps = ${common.lib_deps}
board_build.partitions = Marlin/src/HAL/ESP32/esp32.csv
upload_speed = 115200
monitor_speed = 115200
[env:mks_tinybee]
extends = env:esp32
platform = espressif32@2.1.0
board_build.partitions = default_8MB.csv

Write Preview
Loading…
Cancel
Save