diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 3aaa5887ec..f5c218dc7f 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -533,6 +533,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 //LCD and SD support + +// Character based displays can have different extended charsets. If you see strange or missing characters on yours - try an other definition below. +#define DISPLAY_CHARSET_HD44870_JAPAN // "ääööüüß°" +//#define DISPLAY_CHARSET_HD44870_WESTERN // with better support for European languages. "ÄäÖöÜüß°" +//#define DISPLAY_CHARSET_DOGM // for full graphics display "ÄäÖÖÜÜß°" + //#define ULTRA_LCD //general LCD support, also 16x2 //#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) //#define SDSUPPORT // Enable SD Card Support in Hardware Console diff --git a/Marlin/language.h b/Marlin/language.h index 67fc1b372d..defe1e959d 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,6 +1,8 @@ #ifndef LANGUAGE_H #define LANGUAGE_H +#include "Configuration.h" + #define LANGUAGE_CONCAT(M) #M #define GENERATE_LANGUAGE_INCLUDE(M) LANGUAGE_CONCAT(language_##M.h) @@ -160,6 +162,71 @@ #define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!" +// LCD Menu Messages + +#define STR_Ae "Ae" // No charset known now. Default will be overruled when we know. +#define STR_ae "ae" +#define STR_Oe "Oe" +#define STR_oe "oe" +#define STR_Ue "Ue" +#define STR_ue "ue" +#define STR_sz "ss" +#define STR_Deg "" +#define STR_THERMOMETER "\302" + +#ifdef DISPLAY_CHARSET_DOGM + #define STR_Ae "\304" // U8glib + #define STR_ae "\344" + #define STR_Oe "\326" + #define STR_oe STR_Oe + #define STR_Ue "\334" + #define STR_ue STR_Ue + #define STR_sz "\337" + #define STR_Deg "\260" + #define STR_THERMOMETER "\377" +#endif +#ifdef DISPLAY_CHARSET_HD44870_JAPAN // HD44870 ROM Code: A00 (Japan) + #define STR_ae "\xe1" + #define STR_Ae STR_ae + #define STR_oe "\357" + #define STR_Oe STR_oe + #define STR_ue "\365" + #define STR_Ue STR_ue + #define STR_sz "\342" + #define STR_Deg "\271" + #define STR_THERMOMETER "\302" +#endif +#ifdef DISPLAY_CHARSET_HD44870_WESTERN // HD44870 ROM Code: A02 (Western) + #define STR_Ae "\216" + #define STR_ae "\204" + #define STR_Oe "\211" + #define STR_oe "\204" + #define STR_Ue "\212" + #define STR_ue "\201" + #define STR_sz "\160" + #define STR_Deg "\337" + #define STR_THERMOMETER "\302" +#endif + +/* +#define TESTSTRING000 "\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017" +#define TESTSTRING020 "\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define TESTSTRING040 "\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057" +#define TESTSTRING060 "\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077" +#define TESTSTRING100 "\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117" +#define TESTSTRING120 "\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137" +#define TESTSTRING140 "\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157" +#define TESTSTRING160 "\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177" +#define TESTSTRING200 "\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217" +#define TESTSTRING220 "\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237" +#define TESTSTRING240 "\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257" +#define TESTSTRING260 "\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277" +#define TESTSTRING300 "\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317" +#define TESTSTRING320 "\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337" +#define TESTSTRING340 "\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357" +#define TESTSTRING360 "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377" +*/ + #include LANGUAGE_INCLUDE #endif //__LANGUAGE_H diff --git a/Marlin/language_de.h b/Marlin/language_de.h index 8aa06024ce..bbad53368e 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -9,97 +9,96 @@ #define LANGUAGE_DE_H #define WELCOME_MSG MACHINE_NAME " Bereit." -#define MSG_SD_INSERTED "SDKarte erkannt" -#define MSG_SD_REMOVED "SDKarte entfernt" -#define MSG_MAIN "Hauptmenü" +#define MSG_SD_INSERTED "SDKarte erkannt." +#define MSG_SD_REMOVED "SDKarte entfernt." +#define MSG_MAIN "Hauptmen" STR_ue #define MSG_AUTOSTART "Autostart" -#define MSG_DISABLE_STEPPERS "Stepper abschalt." -#define MSG_AUTO_HOME "Auto Nullpunkt" -#define MSG_SET_HOME_OFFSETS "Set home offsets" -#define MSG_SET_ORIGIN "Setze Nullpunkt" -#define MSG_PREHEAT_PLA "Vorwärmen PLA" -#define MSG_PREHEAT_PLA_N "Vorwärmen PLA " +#define MSG_DISABLE_STEPPERS "Motoren Aus" // M84 +#define MSG_AUTO_HOME "Home" // G28 +#define MSG_SET_HOME_OFFSETS "Setze Home hier" +#define MSG_SET_ORIGIN "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp +#define MSG_PREHEAT_PLA "Vorw" STR_ae "rmen PLA" +#define MSG_PREHEAT_PLA_N "Vorw" STR_ae "rmen PLA " #define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle" #define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett" -#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein." -#define MSG_PREHEAT_ABS "Vorwärmen ABS" -#define MSG_PREHEAT_ABS_N "Vorwärmen ABS " +#define MSG_PREHEAT_PLA_SETTINGS "Vorw" STR_ae "rm. PLA Ein." +#define MSG_PREHEAT_ABS "Vorw" STR_ae "rmen ABS" +#define MSG_PREHEAT_ABS_N "Vorw" STR_ae "rmen ABS " #define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle" #define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett" -#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein." -#define MSG_COOLDOWN "Abkühlen" -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE "Extrude" +#define MSG_PREHEAT_ABS_SETTINGS "Vorw" STR_ae "rm. ABS Ein." +#define MSG_COOLDOWN "Abk" STR_ue "hlen" +#define MSG_SWITCH_PS_ON "Netzteil Ein" +#define MSG_SWITCH_PS_OFF "Netzteil Aus" #define MSG_RETRACT "Retract" -#define MSG_MOVE_AXIS "Achsen bewegen" -#define MSG_MOVE_X "X bewegen" -#define MSG_MOVE_Y "Y bewegen" -#define MSG_MOVE_Z "Z bewegen" -#define MSG_MOVE_E "Extruder" -#define MSG_MOVE_01MM "0.1mm bewegen" -#define MSG_MOVE_1MM "1mm bewegen" -#define MSG_MOVE_10MM "10mm bewegen" -#define MSG_SPEED "Geschw" -#define MSG_NOZZLE "Düse" +#define MSG_MOVE_AXIS "Bewegen" +#define MSG_MOVE_X "X" +#define MSG_MOVE_Y "Y" +#define MSG_MOVE_Z "Z" +#define MSG_MOVE_E "E" +#define MSG_MOVE_01MM " 0.1 mm" +#define MSG_MOVE_1MM " 1.0 mm" +#define MSG_MOVE_10MM "10.0 mm" +#define MSG_SPEED "Geschw." +#define MSG_NOZZLE "D" STR_ue "se" #define MSG_BED "Bett" -#define MSG_FAN_SPEED "Lüftergeschw." +#define MSG_FAN_SPEED "L" STR_ue "ftergeschw." #define MSG_FLOW "Fluss" #define MSG_CONTROL "Einstellungen" -#define MSG_MIN "\002 Min" -#define MSG_MAX "\002 Max" -#define MSG_FACTOR "\002 Faktor" +#define MSG_MIN STR_THERMOMETER " Min" +#define MSG_MAX STR_THERMOMETER " Max" +#define MSG_FACTOR STR_THERMOMETER " Faktor" #define MSG_AUTOTEMP "AutoTemp" #define MSG_ON "Ein" #define MSG_OFF "Aus" -#define MSG_PID_P "PID-P" -#define MSG_PID_I "PID-I" -#define MSG_PID_D "PID-D" -#define MSG_PID_C "PID-C" -#define MSG_ACC "Acc" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX "Vmax " +#define MSG_PID_P "PID P" +#define MSG_PID_I "PID I" +#define MSG_PID_D "PID D" +#define MSG_PID_C "PID C" +#define MSG_ACC "A" +#define MSG_VXY_JERK "V xy jerk" +#define MSG_VZ_JERK "V z jerk" +#define MSG_VE_JERK "V e jerk" +#define MSG_VMAX "V max " // space by purpose #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" -#define MSG_VMIN "Vmin" +#define MSG_VMIN "V min" #define MSG_VTRAV_MIN "VTrav min" -#define MSG_AMAX "Amax " -#define MSG_A_RETRACT "A-Retract" -#define MSG_XSTEPS "Xsteps/mm" -#define MSG_YSTEPS "Ysteps/mm" -#define MSG_ZSTEPS "Zsteps/mm" -#define MSG_ESTEPS "Esteps/mm" +#define MSG_AMAX "A max " // space by purpose +#define MSG_A_RETRACT "A Retract" +#define MSG_XSTEPS "X steps/mm" +#define MSG_YSTEPS "Y steps/mm" +#define MSG_ZSTEPS "Z steps/mm" +#define MSG_ESTEPS "E steps/mm" #define MSG_TEMPERATURE "Temperatur" #define MSG_MOTION "Bewegung" #define MSG_VOLUMETRIC "Filament" -#define MSG_VOLUMETRIC_ENABLED "E in mm3" -#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" -#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" -#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Filament D 1" +#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Filament D 2" +#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Filament D 3" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "EPROM speichern" #define MSG_LOAD_EPROM "EPROM laden" #define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_REFRESH "Aktualisieren" -#define MSG_WATCH "Beobachten" +#define MSG_WATCH "Info" #define MSG_PREPARE "Vorbereitung" #define MSG_TUNE "Justierung" -#define MSG_PAUSE_PRINT "Druck anhalten" -#define MSG_RESUME_PRINT "Druck fortsetz" -#define MSG_STOP_PRINT "Druck stoppen" -#define MSG_CARD_MENU "SDKarten Menü" +#define MSG_PAUSE_PRINT "SD-Druck Pause" +#define MSG_RESUME_PRINT "SD-Druck Weiter" +#define MSG_STOP_PRINT "SD-Druck Abbruch" +#define MSG_CARD_MENU "SDKarte" #define MSG_NO_CARD "Keine SDKarte" #define MSG_DWELL "Warten..." -#define MSG_USERWAIT "Warte auf Nutzer" -#define MSG_RESUMING "Druck fortsetzung" -#define MSG_PRINT_ABORTED "Print aborted" -#define MSG_NO_MOVE "Kein Zug." -#define MSG_KILLED "KILLED" -#define MSG_STOPPED "GESTOPPT" +#define MSG_USERWAIT "Warte auf Nutzer." +#define MSG_RESUMING "Druck geht weiter" +#define MSG_PRINT_ABORTED "Druck abgebrochen" +#define MSG_NO_MOVE "Motoren Eingesch." +#define MSG_KILLED "KILLED." +#define MSG_STOPPED "ANGEHALTEN." #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm" #define MSG_CONTROL_RETRACTF "Retract V" @@ -109,22 +108,22 @@ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Filament wechseln" -#define MSG_INIT_SDCARD "Init. SD-Card" -#define MSG_CNG_SDCARD "Change SD-Card" -#define MSG_ZPROBE_OUT "Z probe out. bed" -#define MSG_POSITION_UNKNOWN "Home X/Y before Z" +#define MSG_INIT_SDCARD "SDKarte erkennen"// Manually initialize the SD-card via user interface +#define MSG_CNG_SDCARD "SDKarte erkennen"// SD-card changed by user. For machines with no autocarddetect. Both send "M21" +#define MSG_ZPROBE_OUT "Sensor ausserhalb" +#define MSG_POSITION_UNKNOWN "X/Y vor Z Homen." #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" -#define MSG_ENDSTOP_ABORT "Endstop abort" +#define MSG_ENDSTOP_ABORT "Endstop Abbr. Ein" #ifdef DELTA_CALIBRATION_MENU - #define MSG_DELTA_CALIBRATE "Delta Calibration" - #define MSG_DELTA_CALIBRATE_X "Calibrate X" - #define MSG_DELTA_CALIBRATE_Y "Calibrate Y" - #define MSG_DELTA_CALIBRATE_Z "Calibrate Z" - #define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" + #define MSG_DELTA_CALIBRATE "Delta Kalibrieren" + #define MSG_DELTA_CALIBRATE_X "Kalibriere X" + #define MSG_DELTA_CALIBRATE_Y "Kalibriere Y" + #define MSG_DELTA_CALIBRATE_Z "Kalibriere Z" + #define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte" #endif // DELTA_CALIBRATION_MENU #endif // LANGUAGE_DE_H