andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Tool-change debug option

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
committed by Scott Lahteine
parent
3513ea7ae1
commit
b40440cf38
5 changed files with 145 additions and 161 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 3
      Marlin/src/core/debug_out.h
  2. 4
      Marlin/src/gcode/control/M605.cpp
  3. 2
      Marlin/src/module/motion.cpp
  4. 2
      Marlin/src/module/motion.h
  5. 295
      Marlin/src/module/tool_change.cpp

3
Marlin/src/core/debug_out.h
View File

@ -52,6 +52,7 @@
#undef DEBUG_POS
#undef DEBUG_XYZ
#undef DEBUG_DELAY
#undef DEBUG_SYNCHRONIZE
#if DEBUG_OUT
@ -83,6 +84,7 @@
#define DEBUG_POS SERIAL_POS
#define DEBUG_XYZ SERIAL_XYZ
#define DEBUG_DELAY(ms) serial_delay(ms)
#define DEBUG_SYNCHRONIZE() planner.synchronize()
#else
@ -112,6 +114,7 @@
#define DEBUG_POS(...) NOOP
#define DEBUG_XYZ(...) NOOP
#define DEBUG_DELAY(...) NOOP
#define DEBUG_SYNCHRONIZE() NOOP
#endif

4
Marlin/src/gcode/control/M605.cpp
View File

@ -92,8 +92,10 @@
case DXC_AUTO_PARK_MODE:
break;
case DXC_DUPLICATION_MODE:
if (parser.seen('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), X2_MIN_POS - x_home_pos(0));
// Set the X offset, but no less than the safety gap
if (parser.seen('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), (X2_MIN_POS) - (X1_MIN_POS));
if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
// Always switch back to tool 0
if (active_extruder != 0) tool_change(0);
break;
default:

2
Marlin/src/module/motion.cpp
View File

@ -946,7 +946,7 @@ FORCE_INLINE void segment_idle(millis_t &next_idle_ms) {
millis_t delayed_move_time = 0; // used in mode 1
int16_t duplicate_extruder_temp_offset = 0; // used in mode 2
float x_home_pos(const int extruder) {
float x_home_pos(const uint8_t extruder) {
if (extruder == 0)
return base_home_pos(X_AXIS);
else

2
Marlin/src/module/motion.h
View File

@ -378,7 +378,7 @@ void homeaxis(const AxisEnum axis);
FORCE_INLINE bool dxc_is_duplicating() { return dual_x_carriage_mode >= DXC_DUPLICATION_MODE; }
float x_home_pos(const int extruder);
float x_home_pos(const uint8_t extruder);
FORCE_INLINE int x_home_dir(const uint8_t extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; }

295
Marlin/src/module/tool_change.cpp
View File

@ -31,7 +31,9 @@
#include "../MarlinCore.h"
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
//#define DEBUG_TOOL_CHANGE
#define DEBUG_OUT ENABLED(DEBUG_TOOL_CHANGE)
#include "../core/debug_out.h"
#if EXTRUDERS > 1
@ -190,10 +192,8 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
current_position.x = mpe_settings.parking_xpos[new_tool] + offsetcompensation;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("(1) Move extruder ", int(new_tool));
DEBUG_POS(" to new extruder ParkPos", current_position);
}
DEBUG_ECHOPAIR("(1) Move extruder ", int(new_tool));
DEBUG_POS(" to new extruder ParkPos", current_position);
planner.buffer_line(current_position, mpe_settings.fast_feedrate, new_tool);
planner.synchronize();
@ -202,10 +202,8 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
current_position.x = grabpos + offsetcompensation;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("(2) Couple extruder ", int(new_tool));
DEBUG_POS(" to new extruder GrabPos", current_position);
}
DEBUG_ECHOPAIR("(2) Couple extruder ", int(new_tool));
DEBUG_POS(" to new extruder GrabPos", current_position);
planner.buffer_line(current_position, mpe_settings.slow_feedrate, new_tool);
planner.synchronize();
@ -216,10 +214,9 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// STEP 3
current_position.x = mpe_settings.parking_xpos[new_tool] + offsetcompensation;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("(3) Move extruder ", int(new_tool));
DEBUG_POS(" back to new extruder ParkPos", current_position);
}
DEBUG_ECHOPAIR("(3) Move extruder ", int(new_tool));
DEBUG_POS(" back to new extruder ParkPos", current_position);
planner.buffer_line(current_position, mpe_settings.slow_feedrate, new_tool);
planner.synchronize();
@ -227,10 +224,9 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// STEP 4
current_position.x = mpe_settings.parking_xpos[active_extruder] + (active_extruder == 0 ? MPE_TRAVEL_DISTANCE : -MPE_TRAVEL_DISTANCE) + offsetcompensation;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("(4) Move extruder ", int(new_tool));
DEBUG_POS(" close to old extruder ParkPos", current_position);
}
DEBUG_ECHOPAIR("(4) Move extruder ", int(new_tool));
DEBUG_POS(" close to old extruder ParkPos", current_position);
planner.buffer_line(current_position, mpe_settings.fast_feedrate, new_tool);
planner.synchronize();
@ -239,10 +235,8 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
current_position.x = mpe_settings.parking_xpos[active_extruder] + offsetcompensation;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("(5) Park extruder ", int(new_tool));
DEBUG_POS(" at old extruder ParkPos", current_position);
}
DEBUG_ECHOPAIR("(5) Park extruder ", int(new_tool));
DEBUG_POS(" at old extruder ParkPos", current_position);
planner.buffer_line(current_position, mpe_settings.slow_feedrate, new_tool);
planner.synchronize();
@ -251,15 +245,13 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
current_position.x = oldx;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR("(6) Move extruder ", int(new_tool));
DEBUG_POS(" to starting position", current_position);
}
DEBUG_ECHOPAIR("(6) Move extruder ", int(new_tool));
DEBUG_POS(" to starting position", current_position);
planner.buffer_line(current_position, mpe_settings.fast_feedrate, new_tool);
planner.synchronize();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Autopark done.");
DEBUG_ECHOLNPGM("Autopark done.");
}
#elif ENABLED(PARKING_EXTRUDER)
@ -308,34 +300,35 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// STEP 1
if (DEBUGGING(LEVELING)) DEBUG_POS("Start PE Tool-Change", current_position);
DEBUG_POS("Start PE Tool-Change", current_position);
current_position.x = parkingposx[active_extruder] + x_offset;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR("(1) Park extruder ", int(active_extruder));
DEBUG_POS("Moving ParkPos", current_position);
}
DEBUG_ECHOLNPAIR("(1) Park extruder ", int(active_extruder));
DEBUG_POS("Moving ParkPos", current_position);
fast_line_to_current(X_AXIS);
// STEP 2
planner.synchronize();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(2) Disengage magnet");
DEBUG_ECHOLNPGM("(2) Disengage magnet");
pe_deactivate_solenoid(active_extruder);
// STEP 3
current_position.x += active_extruder ? -10 : 10; // move 10mm away from parked extruder
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPGM("(3) Move near new extruder");
DEBUG_POS("Move away from parked extruder", current_position);
}
DEBUG_ECHOLNPGM("(3) Move near new extruder");
DEBUG_POS("Move away from parked extruder", current_position);
fast_line_to_current(X_AXIS);
// STEP 4
planner.synchronize();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(4) Engage magnetic field");
DEBUG_ECHOLNPGM("(4) Engage magnetic field");
// Just save power for inverted magnets
TERN_(PARKING_EXTRUDER_SOLENOIDS_INVERT, pe_activate_solenoid(active_extruder));
pe_activate_solenoid(new_tool);
@ -346,23 +339,23 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
fast_line_to_current(X_AXIS);
current_position.x = grabpos;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("(5) Unpark extruder", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("(5) Unpark extruder", current_position);
slow_line_to_current(X_AXIS);
// STEP 6
current_position.x = midpos - TERN0(HAS_HOTEND_OFFSET, hotend_offset[new_tool].x);
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("(6) Move midway between hotends", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("(6) Move midway between hotends", current_position);
fast_line_to_current(X_AXIS);
planner.synchronize(); // Always sync the final move
if (DEBUGGING(LEVELING)) DEBUG_POS("PE Tool-Change done.", current_position);
DEBUG_POS("PE Tool-Change done.", current_position);
}
else { // nomove == true
// Only engage magnetic field for new extruder
@ -399,31 +392,31 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// 1. Move to switch position of current toolhead
if (DEBUGGING(LEVELING)) DEBUG_POS("Start ST Tool-Change", current_position);
DEBUG_POS("Start ST Tool-Change", current_position);
current_position.x = placexpos;
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR("(1) Place old tool ", int(active_extruder));
DEBUG_POS("Move X SwitchPos", current_position);
}
DEBUG_ECHOLNPAIR("(1) Place old tool ", int(active_extruder));
DEBUG_POS("Move X SwitchPos", current_position);
fast_line_to_current(X_AXIS);
current_position.y = SWITCHING_TOOLHEAD_Y_POS - (SWITCHING_TOOLHEAD_Y_SECURITY);
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move Y SwitchPos + Security", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move Y SwitchPos + Security", current_position);
fast_line_to_current(Y_AXIS);
// 2. Unlock tool and drop it in the dock
planner.synchronize();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(2) Unlock and Place Toolhead");
DEBUG_ECHOLNPGM("(2) Unlock and Place Toolhead");
swt_lock(false);
safe_delay(500);
current_position.y = SWITCHING_TOOLHEAD_Y_POS;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos", current_position);
DEBUG_POS("Move Y SwitchPos", current_position);
slow_line_to_current(Y_AXIS);
// Wait for move to complete, then another 0.2s
@ -431,34 +424,34 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
safe_delay(200);
current_position.y -= SWITCHING_TOOLHEAD_Y_CLEAR;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back Y clear", current_position);
DEBUG_POS("Move back Y clear", current_position);
fast_line_to_current(Y_AXIS); // move away from docked toolhead
// 3. Move to the new toolhead
current_position.x = grabxpos;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_ECHOLNPGM("(3) Move to new toolhead position");
DEBUG_POS("Move to new toolhead X", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPGM("(3) Move to new toolhead position");
DEBUG_POS("Move to new toolhead X", current_position);
fast_line_to_current(X_AXIS);
current_position.y = SWITCHING_TOOLHEAD_Y_POS - (SWITCHING_TOOLHEAD_Y_SECURITY);
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move Y SwitchPos + Security", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move Y SwitchPos + Security", current_position);
fast_line_to_current(Y_AXIS);
// 4. Grab and lock the new toolhead
current_position.y = SWITCHING_TOOLHEAD_Y_POS;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_ECHOLNPGM("(4) Grab and lock new toolhead");
DEBUG_POS("Move Y SwitchPos", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPGM("(4) Grab and lock new toolhead");
DEBUG_POS("Move Y SwitchPos", current_position);
slow_line_to_current(Y_AXIS);
// Wait for move to finish, pause 0.2s, move servo, pause 0.5s
@ -468,11 +461,11 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
safe_delay(500);
current_position.y -= SWITCHING_TOOLHEAD_Y_CLEAR;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back Y clear", current_position);
DEBUG_POS("Move back Y clear", current_position);
fast_line_to_current(Y_AXIS); // Move away from docked toolhead
planner.synchronize(); // Always sync the final move
if (DEBUGGING(LEVELING)) DEBUG_POS("ST Tool-Change done.", current_position);
DEBUG_POS("ST Tool-Change done.", current_position);
}
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
@ -495,83 +488,77 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
* 4. Grab the new toolhead and move to security position
*/
if (DEBUGGING(LEVELING)) DEBUG_POS("Start MST Tool-Change", current_position);
DEBUG_POS("Start MST Tool-Change", current_position);
// 1. Move to switch position current toolhead
current_position.y = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR;
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPAIR("(1) Place old tool ", int(active_extruder));
DEBUG_POS("Move Y SwitchPos + Security", current_position);
}
SERIAL_ECHOLNPAIR("(1) Place old tool ", int(active_extruder));
DEBUG_POS("Move Y SwitchPos + Security", current_position);
fast_line_to_current(Y_AXIS);
current_position.x = placexclear;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move X SwitchPos + Security", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move X SwitchPos + Security", current_position);
fast_line_to_current(X_AXIS);
current_position.y = SWITCHING_TOOLHEAD_Y_POS;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move Y SwitchPos", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move Y SwitchPos", current_position);
fast_line_to_current(Y_AXIS);
current_position.x = placexpos;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move X SwitchPos", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move X SwitchPos", current_position);
line_to_current_position(planner.settings.max_feedrate_mm_s[X_AXIS] * 0.25f);
// 2. Release and place toolhead in the dock
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_ECHOLNPGM("(2) Release and Place Toolhead");
}
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPGM("(2) Release and Place Toolhead");
current_position.y = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_RELEASE;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos + Release", current_position);
DEBUG_POS("Move Y SwitchPos + Release", current_position);
line_to_current_position(planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.1f);
current_position.y = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_SECURITY;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move Y SwitchPos + Security", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move Y SwitchPos + Security", current_position);
line_to_current_position(planner.settings.max_feedrate_mm_s[Y_AXIS]);
// 3. Move to new toolhead position
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_ECHOLNPGM("(3) Move to new toolhead position");
}
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPGM("(3) Move to new toolhead position");
current_position.x = grabxpos;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move to new toolhead X", current_position);
DEBUG_POS("Move to new toolhead X", current_position);
fast_line_to_current(X_AXIS);
// 4. Grab the new toolhead and move to security position
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_ECHOLNPGM("(4) Grab new toolhead, move to security position");
}
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPGM("(4) Grab new toolhead, move to security position");
current_position.y = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_RELEASE;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move Y SwitchPos + Release", current_position);
DEBUG_POS("Move Y SwitchPos + Release", current_position);
line_to_current_position(planner.settings.max_feedrate_mm_s[Y_AXIS]);
current_position.y = SWITCHING_TOOLHEAD_Y_POS;
if (DEBUGGING(LEVELING)) {
planner.synchronize();
DEBUG_POS("Move Y SwitchPos", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_POS("Move Y SwitchPos", current_position);
_line_to_current(Y_AXIS, 0.2f);
#if ENABLED(PRIME_BEFORE_REMOVE) && (SWITCHING_TOOLHEAD_PRIME_MM || SWITCHING_TOOLHEAD_RETRACT_MM)
@ -589,17 +576,17 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
#endif
current_position.x = grabxclear;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move to new toolhead X + Security", current_position);
DEBUG_POS("Move to new toolhead X + Security", current_position);
_line_to_current(X_AXIS, 0.1f);
planner.synchronize();
safe_delay(100); // Give switch time to settle
current_position.y += SWITCHING_TOOLHEAD_Y_CLEAR;
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back Y clear", current_position);
DEBUG_POS("Move back Y clear", current_position);
fast_line_to_current(Y_AXIS); // move away from docked toolhead
planner.synchronize(); // Always sync last tool-change move
if (DEBUGGING(LEVELING)) DEBUG_POS("MST Tool-Change done.", current_position);
DEBUG_POS("MST Tool-Change done.", current_position);
}
#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
@ -628,32 +615,29 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
* 9. Apply Z hotend offset to current position
*/
if (DEBUGGING(LEVELING)) DEBUG_POS("Start EMST Tool-Change", current_position);
DEBUG_POS("Start EMST Tool-Change", current_position);
// 1. Raise Z-Axis to give enough clearance
current_position.z += SWITCHING_TOOLHEAD_Z_HOP;
if (DEBUGGING(LEVELING)) DEBUG_POS("(1) Raise Z-Axis ", current_position);
DEBUG_POS("(1) Raise Z-Axis ", current_position);
fast_line_to_current(Z_AXIS);
// 2. Move to position near active extruder parking
if (DEBUGGING(LEVELING)) {
planner.synchronize();
SERIAL_ECHOLNPAIR("(2) Move near active extruder parking", active_extruder);
DEBUG_POS("Moving ParkPos", current_position);
}
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPAIR("(2) Move near active extruder parking", active_extruder);
DEBUG_POS("Moving ParkPos", current_position);
current_position.set(hoffs.x + placexpos,
hoffs.y + SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR);
fast_line_to_current(X_AXIS);
// 3. Move gently to park position of active extruder
if (DEBUGGING(LEVELING)) {
planner.synchronize();
SERIAL_ECHOLNPAIR("(3) Move gently to park position of active extruder", active_extruder);
DEBUG_POS("Moving ParkPos", current_position);
}
DEBUG_SYNCHRONIZE();
SERIAL_ECHOLNPAIR("(3) Move gently to park position of active extruder", active_extruder);
DEBUG_POS("Moving ParkPos", current_position);
current_position.y -= SWITCHING_TOOLHEAD_Y_CLEAR;
slow_line_to_current(Y_AXIS);
@ -661,15 +645,13 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// 4. Disengage magnetic field, wait for delay
planner.synchronize();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(4) Disengage magnet");
DEBUG_ECHOLNPGM("(4) Disengage magnet");
est_deactivate_solenoid();
// 5. Leave extruder and move to position near new extruder parking
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPGM("(5) Move near new extruder parking");
DEBUG_POS("Moving ParkPos", current_position);
}
DEBUG_ECHOLNPGM("(5) Move near new extruder parking");
DEBUG_POS("Moving ParkPos", current_position);
current_position.y += SWITCHING_TOOLHEAD_Y_CLEAR;
slow_line_to_current(Y_AXIS);
@ -688,23 +670,23 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// 7. Engage magnetic field for new extruder parking
planner.synchronize();
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(7) Engage magnetic field");
DEBUG_SYNCHRONIZE();
DEBUG_ECHOLNPGM("(7) Engage magnetic field");
est_activate_solenoid();
// 8. Unpark extruder
current_position.y += SWITCHING_TOOLHEAD_Y_CLEAR;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(8) Unpark extruder");
DEBUG_ECHOLNPGM("(8) Unpark extruder");
slow_line_to_current(X_AXIS);
planner.synchronize(); // Always sync the final move
// 9. Apply Z hotend offset to current position
if (DEBUGGING(LEVELING)) DEBUG_POS("(9) Applying Z-offset", current_position);
DEBUG_POS("(9) Applying Z-offset", current_position);
current_position.z += hoffs.z - hotend_offset[new_tool].z;
if (DEBUGGING(LEVELING)) DEBUG_POS("EMST Tool-Change done.", current_position);
DEBUG_POS("EMST Tool-Change done.", current_position);
}
#endif // ELECTROMAGNETIC_SWITCHING_TOOLHEAD
@ -720,14 +702,13 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
#if ENABLED(DUAL_X_CARRIAGE)
inline void dualx_tool_change(const uint8_t new_tool, bool &no_move) {
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPGM("Dual X Carriage Mode ");
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE: DEBUG_ECHOLNPGM("FULL_CONTROL"); break;
case DXC_AUTO_PARK_MODE: DEBUG_ECHOLNPGM("AUTO_PARK"); break;
case DXC_DUPLICATION_MODE: DEBUG_ECHOLNPGM("DUPLICATION"); break;
case DXC_MIRRORED_MODE: DEBUG_ECHOLNPGM("MIRRORED"); break;
}
DEBUG_ECHOPGM("Dual X Carriage Mode ");
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE: DEBUG_ECHOLNPGM("FULL_CONTROL"); break;
case DXC_AUTO_PARK_MODE: DEBUG_ECHOLNPGM("AUTO_PARK"); break;
case DXC_DUPLICATION_MODE: DEBUG_ECHOLNPGM("DUPLICATION"); break;
case DXC_MIRRORED_MODE: DEBUG_ECHOLNPGM("MIRRORED"); break;
}
const float xhome = x_home_pos(active_extruder);
@ -736,7 +717,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
&& (delayed_move_time || current_position.x != xhome)
) {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("MoveX to ", xhome);
DEBUG_ECHOLNPAIR("MoveX to ", xhome);
// Park old head
current_position.x = xhome;
@ -750,7 +731,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
// This function resets the max/min values - the current position may be overwritten below.
set_axis_is_at_home(X_AXIS);
if (DEBUGGING(LEVELING)) DEBUG_POS("New Extruder", current_position);
DEBUG_POS("New Extruder", current_position);
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE:
@ -769,10 +750,8 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
break;
}
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOLNPAIR("Active extruder parked: ", active_extruder_parked ? "yes" : "no");
DEBUG_POS("New extruder (parked)", current_position);
}
DEBUG_ECHOLNPAIR("Active extruder parked: ", active_extruder_parked ? "yes" : "no");
DEBUG_POS("New extruder (parked)", current_position);
}
#endif // DUAL_X_CARRIAGE
@ -905,7 +884,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
if (!no_move && homing_needed()) {
no_move = true;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("No move (not homed)");
DEBUG_ECHOLNPGM("No move (not homed)");
}
TERN_(HAS_LCD_MENU, if (!no_move) ui.return_to_status());
@ -1058,7 +1037,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
if (DISABLED(DUAL_X_CARRIAGE)) active_extruder = new_tool;
// The newly-selected extruder XYZ is actually at...
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Offset Tool XYZ by { ", diff.x, ", ", diff.y, ", ", diff.z, " }");
DEBUG_ECHOLNPAIR("Offset Tool XYZ by { ", diff.x, ", ", diff.y, ", ", diff.z, " }");
current_position += diff;
// Tell the planner the new "current position"
@ -1139,7 +1118,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
if (can_move_away) {
#if ENABLED(TOOLCHANGE_NO_RETURN)
// Just move back down
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Move back Z only");
DEBUG_ECHOLNPGM("Move back Z only");
#if ENABLED(TOOLCHANGE_PARK)
if (toolchange_settings.enable_park)
@ -1148,7 +1127,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
#else
// Move back to the original (or adjusted) position
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back", destination);
DEBUG_POS("Move back", destination);
#if ENABLED(TOOLCHANGE_PARK)
if (toolchange_settings.enable_park) do_blocking_move_to_xy_z(destination, destination.z, MMM_TO_MMS(TOOLCHANGE_PARK_XY_FEEDRATE));
@ -1159,7 +1138,7 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
#endif
}
else if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Move back skipped");
else DEBUG_ECHOLNPGM("Move back skipped");
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
if (should_swap && !too_cold) {

Write Preview
Loading…
Cancel
Save