Browse Source

Fix extraneous "Home XYZ First" message

pull/1/head
Scott Lahteine 5 years ago
parent
commit
b2e1f77f58
  1. 2
      Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
  2. 2
      Marlin/src/feature/pause.cpp
  3. 2
      Marlin/src/gcode/feature/pause/M600.cpp
  4. 8
      Marlin/src/gcode/feature/pause/M701_M702.cpp
  5. 5
      Marlin/src/gcode/motion/G0_G1.cpp
  6. 5
      Marlin/src/lcd/language/language_an.h
  7. 5
      Marlin/src/lcd/language/language_ca.h
  8. 6
      Marlin/src/lcd/language/language_cz.h
  9. 5
      Marlin/src/lcd/language/language_da.h
  10. 6
      Marlin/src/lcd/language/language_de.h
  11. 12
      Marlin/src/lcd/language/language_en.h
  12. 6
      Marlin/src/lcd/language/language_es.h
  13. 6
      Marlin/src/lcd/language/language_eu.h
  14. 3
      Marlin/src/lcd/language/language_fi.h
  15. 6
      Marlin/src/lcd/language/language_fr.h
  16. 109
      Marlin/src/lcd/language/language_gl.h
  17. 217
      Marlin/src/lcd/language/language_hr.h
  18. 6
      Marlin/src/lcd/language/language_it.h
  19. 5
      Marlin/src/lcd/language/language_jp-kana.h
  20. 6
      Marlin/src/lcd/language/language_ko_KR.h
  21. 5
      Marlin/src/lcd/language/language_nl.h
  22. 5
      Marlin/src/lcd/language/language_pl.h
  23. 6
      Marlin/src/lcd/language/language_pt-br.h
  24. 3
      Marlin/src/lcd/language/language_pt.h
  25. 6
      Marlin/src/lcd/language/language_ru.h
  26. 6
      Marlin/src/lcd/language/language_sk.h
  27. 4
      Marlin/src/lcd/language/language_tr.h
  28. 5
      Marlin/src/lcd/language/language_uk.h
  29. 6
      Marlin/src/lcd/language/language_vi.h
  30. 6
      Marlin/src/lcd/language/language_zh_CN.h
  31. 6
      Marlin/src/lcd/language/language_zh_TW.h
  32. 36
      Marlin/src/module/motion.cpp
  33. 3
      Marlin/src/module/motion.h
  34. 11
      Marlin/src/module/probe.cpp
  35. 2
      Marlin/src/module/tool_change.cpp

2
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@ -313,7 +313,7 @@
// Check for commands that require the printer to be homed
if (may_move) {
planner.synchronize();
if (axis_unhomed_error()) gcode.home_all_axes();
if (axes_need_homing()) gcode.home_all_axes();
#if ENABLED(DUAL_X_CARRIAGE)
if (active_extruder != 0) tool_change(0);
#endif

2
Marlin/src/feature/pause.cpp

@ -442,7 +442,7 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
do_pause_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE);
// Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos)
if (!axis_unhomed_error())
if (!axes_need_homing())
nozzle.park(2, park_point);
#if ENABLED(DUAL_X_CARRIAGE)

2
Marlin/src/gcode/feature/pause/M600.cpp

@ -98,7 +98,7 @@ void GcodeSuite::M600() {
#if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)
// Don't allow filament change without homing first
if (axis_unhomed_error()) home_all_axes();
if (axes_need_homing()) home_all_axes();
#endif
#if EXTRUDERS > 1

8
Marlin/src/gcode/feature/pause/M701_M702.cpp

@ -60,8 +60,8 @@ void GcodeSuite::M701() {
point_t park_point = NOZZLE_PARK_POINT;
#if ENABLED(NO_MOTION_BEFORE_HOMING)
// Only raise Z if the machine is homed
if (axis_unhomed_error()) park_point.z = 0;
// Don't raise Z if the machine isn't homed
if (axes_need_homing()) park_point.z = 0;
#endif
#if ENABLED(MIXING_EXTRUDER)
@ -149,8 +149,8 @@ void GcodeSuite::M702() {
point_t park_point = NOZZLE_PARK_POINT;
#if ENABLED(NO_MOTION_BEFORE_HOMING)
// Only raise Z if the machine is homed
if (axis_unhomed_error()) park_point.z = 0;
// Don't raise Z if the machine isn't homed
if (axes_need_homing()) park_point.z = 0;
#endif
#if ENABLED(MIXING_EXTRUDER)

5
Marlin/src/gcode/motion/G0_G1.cpp

@ -52,7 +52,10 @@ void GcodeSuite::G0_G1(
if (IsRunning()
#if ENABLED(NO_MOTION_BEFORE_HOMING)
&& !axis_unhomed_error(parser.seen('X'), parser.seen('Y'), parser.seen('Z'))
&& !axis_unhomed_error(
(parser.seen('X') ? _BV(X_AXIS) : 0)
| (parser.seen('Y') ? _BV(Y_AXIS) : 0)
| (parser.seen('Z') ? _BV(Z_AXIS) : 0) )
#endif
) {

5
Marlin/src/lcd/language/language_an.h

@ -168,8 +168,7 @@
#define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z")
#define MSG_BABYSTEP_X _UxGT("Micropaso X")
#define MSG_BABYSTEP_Y _UxGT("Micropaso Y")
@ -182,7 +181,7 @@
#define MSG_ERR_MINTEMP _UxGT("Error: Temp Menima")
#define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max base")
#define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min base")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY first")
#define MSG_HALTED _UxGT("IMPRESORA ATURADA")
#define MSG_PLEASE_RESET _UxGT("Per favor reinic.")
#define MSG_SHORT_DAY _UxGT("d")

5
Marlin/src/lcd/language/language_ca.h

@ -170,8 +170,7 @@
#define MSG_CHANGE_MEDIA _UxGT("Canvia SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z fora")
#define MSG_BLTOUCH_RESET _UxGT("Reinicia BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("primer")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s primer")
#define MSG_ZPROBE_ZOFFSET _UxGT("Decalatge Z")
#define MSG_BABYSTEP_X _UxGT("Micropas X")
#define MSG_BABYSTEP_Y _UxGT("Micropas Y")
@ -184,7 +183,7 @@
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMPMAX LLIT")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMPMIN LLIT")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY primer")
#define MSG_HALTED _UxGT("IMPRESSORA PARADA")
#define MSG_PLEASE_RESET _UxGT("Reinicieu")
#define MSG_SHORT_DAY _UxGT("d") // One character only

6
Marlin/src/lcd/language/language_cz.h

@ -116,7 +116,6 @@
#define MSG_Z_OFFSET _UxGT("2. tryska Z")
#define MSG_UBL_DOING_G29 _UxGT("Provádím G29")
#define MSG_UBL_UNHOMED _UxGT("Přejeďte domů")
#define MSG_UBL_TOOLS _UxGT("UBL nástroje")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Manuální síť bodů")
@ -335,8 +334,7 @@
#define MSG_BLTOUCH_STOW _UxGT("BLTouch zasunout")
#define MSG_MANUAL_DEPLOY _UxGT("Vysunout Z-sondu")
#define MSG_MANUAL_STOW _UxGT("Zasunout Z-sondu")
#define MSG_HOME _UxGT("Domů") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("první")
#define MSG_HOME_FIRST _UxGT("Domů %s%s%s první")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z ofset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -354,7 +352,7 @@
#define MSG_ERR_MINTEMP_BED _UxGT("NÍZ. TEPL. PODL.")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err: MAXTEMP KOMORA")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err: MINTEMP KOMORA")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Domů XY první")
#define MSG_HALTED _UxGT("TISK. ZASTAVENA")
#define MSG_PLEASE_RESET _UxGT("Proveďte reset")
#define MSG_SHORT_DAY _UxGT("d")

5
Marlin/src/lcd/language/language_da.h

@ -168,8 +168,7 @@
#define MSG_ZPROBE_OUT _UxGT("Probe udenfor plade")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selv-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("først")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s først")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -182,7 +181,7 @@
#define MSG_ERR_MINTEMP _UxGT("Fejl: Min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Fejl: Maks Plade temp")
#define MSG_ERR_MINTEMP_BED _UxGT("Fejl: Min Plade temp")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY først")
#define MSG_HALTED _UxGT("PRINTER STOPPET")
#define MSG_PLEASE_RESET _UxGT("Reset Venligst")
#define MSG_SHORT_DAY _UxGT("d") // Kun et bogstav

6
Marlin/src/lcd/language/language_de.h

@ -121,7 +121,6 @@
#define MSG_Y_OFFSET _UxGT("2. Düse Y")
#define MSG_Z_OFFSET _UxGT("2. Düse Z")
#define MSG_UBL_DOING_G29 _UxGT("G29 ausführen")
#define MSG_UBL_UNHOMED _UxGT("Home XYZ zuerst")
#define MSG_UBL_TOOLS _UxGT("UBL-Werkzeuge")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")
@ -363,8 +362,7 @@
#define MSG_MANUAL_DEPLOY_TOUCHMI _UxGT("TouchMI ausfahren")
#define MSG_MANUAL_DEPLOY _UxGT("Z-Sonde ausfahren")
#define MSG_MANUAL_STOW _UxGT("Z-Sonde einfahren")
#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("homen")
#define MSG_HOME_FIRST _UxGT("Vorher %s%s%s homen")
#define MSG_ZPROBE_ZOFFSET _UxGT("Sondenversatz Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -384,7 +382,7 @@
#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err:Gehäuse max Temp")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err:Gehäuse min Temp")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Vorher XY vorher")
#define MSG_HALTED _UxGT("DRUCKER GESTOPPT")
#define MSG_PLEASE_RESET _UxGT("Bitte neustarten")
#define MSG_SHORT_DAY _UxGT("t") // One character only

12
Marlin/src/lcd/language/language_en.h

@ -310,9 +310,6 @@
#ifndef MSG_UBL_DOING_G29
#define MSG_UBL_DOING_G29 _UxGT("Doing G29")
#endif
#ifndef MSG_UBL_UNHOMED
#define MSG_UBL_UNHOMED _UxGT("Home XYZ First")
#endif
#ifndef MSG_UBL_TOOLS
#define MSG_UBL_TOOLS _UxGT("UBL Tools")
#endif
@ -1026,11 +1023,8 @@
#ifndef MSG_MANUAL_STOW
#define MSG_MANUAL_STOW _UxGT("Stow Z-Probe")
#endif
#ifndef MSG_HOME
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#endif
#ifndef MSG_FIRST
#define MSG_FIRST _UxGT("First")
#ifndef MSG_HOME_FIRST
#define MSG_HOME_FIRST _UxGT("Home %s%s%s First")
#endif
#ifndef MSG_ZPROBE_ZOFFSET
#define MSG_ZPROBE_ZOFFSET _UxGT("Probe Z Offset")
@ -1090,7 +1084,7 @@
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err: MINTEMP CHAMBER")
#endif
#ifndef MSG_ERR_Z_HOMING
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY First")
#endif
#ifndef MSG_HALTED
#define MSG_HALTED _UxGT("PRINTER HALTED")

6
Marlin/src/lcd/language/language_es.h

@ -120,7 +120,6 @@
#define MSG_Y_OFFSET _UxGT("2ª Boquilla Y")
#define MSG_Z_OFFSET _UxGT("2ª Boquilla Z")
#define MSG_UBL_DOING_G29 _UxGT("Hacer G29")
#define MSG_UBL_UNHOMED _UxGT("Inicio XYZ Primero")
#define MSG_UBL_TOOLS _UxGT("Herramientas UBL")
#define MSG_UBL_LEVEL_BED _UxGT("Nivel.Cama.Uni.(UBL)")
#define MSG_LCD_TILTING_MESH _UxGT("Punto de inclinación")
@ -364,8 +363,7 @@
#define MSG_MANUAL_DEPLOY_TOUCHMI _UxGT("Subir TouchMI")
#define MSG_MANUAL_DEPLOY _UxGT("Subir Sonda Z")
#define MSG_MANUAL_STOW _UxGT("Bajar Sonda Z")
#define MSG_HOME _UxGT("Origen") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("Primero")
#define MSG_HOME_FIRST _UxGT("Origen %s%s%s Primero")
#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z")
#define MSG_BABYSTEP_X _UxGT("Micropaso X")
#define MSG_BABYSTEP_Y _UxGT("Micropaso Y")
@ -385,7 +383,7 @@
#define MSG_ERR_MINTEMP_BED _UxGT("Err:TEMP. MIN CAMA")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err:TEMP. MÁX CÁMARA")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err:TEMP. MIN CÁMARA")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Origen XY Primero")
#define MSG_HALTED _UxGT("IMPRESORA DETENIDA")
#define MSG_PLEASE_RESET _UxGT("Por favor, reinicie")
#define MSG_SHORT_DAY _UxGT("d") // One character only

6
Marlin/src/lcd/language/language_eu.h

@ -81,7 +81,6 @@
//#define MSG_USER_MENU _UxGT("Custom Commands")
#define MSG_UBL_DOING_G29 _UxGT("G29 exekutatzen")
#define MSG_UBL_UNHOMED _UxGT("XYZ etxeratu lehenengo")
#define MSG_UBL_TOOLS _UxGT("UBL Tresnak")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Sarea eskuz sortu")
@ -277,8 +276,7 @@
#define MSG_BLTOUCH_RESET _UxGT("BLTouch berrabia.")
#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch jaitsi/luzatu")
#define MSG_BLTOUCH_STOW _UxGT("BLTouch igo/jaso")
#define MSG_HOME _UxGT("Etxera") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("lehenengo")
#define MSG_HOME_FIRST _UxGT("Etxera %s%s%s lehenengo")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Konpentsatu")
#define MSG_BABYSTEP_X _UxGT("Mikro-urratsa X")
#define MSG_BABYSTEP_Y _UxGT("Mikro-urratsa Y")
@ -291,7 +289,7 @@
#define MSG_ERR_MINTEMP _UxGT("Err: Tenp Minimoa")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Ohe Tenp Max")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: Ohe Tenp Min")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Etxera XY lehenengo")
#define MSG_HALTED _UxGT("INPRIMA. GELDIRIK")
#define MSG_PLEASE_RESET _UxGT("Berrabia. Mesedez")
#define MSG_SHORT_DAY _UxGT("d") // One character only

3
Marlin/src/lcd/language/language_fi.h

@ -156,8 +156,7 @@
#define MSG_INIT_MEDIA _UxGT("Init. SD-Card")
#define MSG_CHANGE_MEDIA _UxGT("Change SD-Card")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")

6
Marlin/src/lcd/language/language_fr.h

@ -124,7 +124,6 @@
#define MSG_G26_CANCELED _UxGT("G26 annulé")
#define MSG_G26_LEAVING _UxGT("Sortie G26")
#define MSG_UBL_DOING_G29 _UxGT("G29 en cours")
#define MSG_UBL_UNHOMED _UxGT("Origine XYZ requise")
#define MSG_UBL_TOOLS _UxGT("Outils UBL")
#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié")
#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel")
@ -360,8 +359,7 @@
#define MSG_MANUAL_DEPLOY_TOUCHMI _UxGT("Déployer TouchMI")
#define MSG_MANUAL_DEPLOY _UxGT("Déployer Sonde Z")
#define MSG_MANUAL_STOW _UxGT("Ranger Sonde Z")
#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("Premier")
#define MSG_HOME_FIRST _UxGT("Origine %s%s%s Premier")
#define MSG_ZPROBE_ZOFFSET _UxGT("Décalage Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -381,7 +379,7 @@
#define MSG_ERR_MINTEMP_BED _UxGT("Err TEMP. MIN LIT")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err MAXTEMP CAISSON")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err MINTEMP CAISSON")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Origine XY Premier")
#define MSG_HALTED _UxGT("IMPR. STOPPÉE")
#define MSG_PLEASE_RESET _UxGT("Redémarrer SVP")

109
Marlin/src/lcd/language/language_gl.h

@ -82,36 +82,36 @@
#define MSG_BED _UxGT("Cama")
#define MSG_FAN_SPEED _UxGT("Velocidade vent.")
#define MSG_FLOW _UxGT("Fluxo")
#define MSG_CONTROL _UxGT("Control")
//#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_LCD_ON _UxGT("On")
#define MSG_LCD_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
//#define MSG_AUTOTEMP _UxGT("Autotemp")
//#define MSG_LCD_ON _UxGT("On")
//#define MSG_LCD_OFF _UxGT("Off")
//#define MSG_PID_P _UxGT("PID-P")
//#define MSG_PID_I _UxGT("PID-I")
//#define MSG_PID_D _UxGT("PID-D")
//#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Escolla")
#define MSG_ACC _UxGT("Acel")
#define MSG_JERK _UxGT("Jerk")
#if IS_KINEMATIC
#define MSG_VA_JERK _UxGT("Va-jerk")
#define MSG_VB_JERK _UxGT("Vb-jerk")
#define MSG_VC_JERK _UxGT("Vc-jerk")
#else
#define MSG_VA_JERK _UxGT("Vx-jerk")
#define MSG_VB_JERK _UxGT("Vy-jerk")
#define MSG_VC_JERK _UxGT("Vz-jerk")
#endif
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-travel")
//#define MSG_JERK _UxGT("Jerk")
//#if IS_KINEMATIC
// #define MSG_VA_JERK _UxGT("Va-jerk")
// #define MSG_VB_JERK _UxGT("Vb-jerk")
// #define MSG_VC_JERK _UxGT("Vc-jerk")
//#else
// #define MSG_VA_JERK _UxGT("Vx-jerk")
// #define MSG_VB_JERK _UxGT("Vy-jerk")
// #define MSG_VC_JERK _UxGT("Vz-jerk")
//#endif
//#define MSG_VE_JERK _UxGT("Ve-jerk")
//#define MSG_VMAX _UxGT("Vmax ")
//#define MSG_VMIN _UxGT("Vmin")
//#define MSG_VTRAV_MIN _UxGT("VTrav min")
//#define MSG_AMAX _UxGT("Amax ")
//#define MSG_A_RETRACT _UxGT("A-retract")
//#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_STEPS_PER_MM _UxGT("Pasos/mm")
#if IS_KINEMATIC
#define MSG_ASTEPS _UxGT("A pasos/mm")
@ -165,10 +165,9 @@
#define MSG_INIT_MEDIA _UxGT("Iniciando SD")
#define MSG_CHANGE_MEDIA _UxGT("Cambiar SD")
#define MSG_ZPROBE_OUT _UxGT("Sonda-Z sen cama")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
//#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
#define MSG_BLTOUCH_SELFTEST _UxGT("Comprobar BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("Iniciar BLTouch")
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Micropaso X")
#define MSG_BABYSTEP_Y _UxGT("Micropaso Y")
@ -177,16 +176,16 @@
#define MSG_HEATING_FAILED_LCD _UxGT("Fallo quentando")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Erro temperatura")
#define MSG_THERMAL_RUNAWAY _UxGT("Temp. excesiva")
#define MSG_ERR_MAXTEMP _UxGT("Err: temp. max.")
#define MSG_ERR_MINTEMP _UxGT("Err: temp. min.")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
//#define MSG_ERR_MAXTEMP _UxGT("Err: temp. max.")
//#define MSG_ERR_MINTEMP _UxGT("Err: temp. min.")
//#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
//#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
//#define MSG_ERR_Z_HOMING _UxGT("Home XY first")
#define MSG_HALTED _UxGT("SISTEMA MORTO")
#define MSG_PLEASE_RESET _UxGT("Debe reiniciar!")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
//#define MSG_SHORT_DAY _UxGT("d") // One character only
//#define MSG_SHORT_HOUR _UxGT("h") // One character only
//#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Quentando...")
#define MSG_BED_HEATING _UxGT("Quentando cama...")
#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta")
@ -229,26 +228,26 @@
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("iniciar troco")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filamento")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("descarga do")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza o")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("faga click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("carga do")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("seguir co")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("traballo")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("iniciar troco")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filamento")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("descarga do")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza o")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("faga click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("carga do")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("seguir co")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("traballo")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Descargando...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza e click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Descargando...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza e click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...")
#endif // LCD_HEIGHT < 4

217
Marlin/src/lcd/language/language_hr.h

@ -35,8 +35,8 @@
#define WELCOME_MSG MACHINE_NAME _UxGT(" spreman.")
#define MSG_MEDIA_INSERTED _UxGT("SD kartica umetnuta")
#define MSG_MEDIA_REMOVED _UxGT("SD kartica uklonjena")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Main")
//#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
//#define MSG_MAIN _UxGT("Main")
#define MSG_AUTOSTART _UxGT("Auto pokretanje")
#define MSG_DISABLE_STEPPERS _UxGT("Ugasi steppere")
#define MSG_AUTO_HOME _UxGT("Automatski homing")
@ -63,15 +63,15 @@
#define MSG_COOLDOWN _UxGT("Hlađenje")
#define MSG_SWITCH_PS_ON _UxGT("Uključi napajanje")
#define MSG_SWITCH_PS_OFF _UxGT("Isključi napajanje")
#define MSG_EXTRUDE _UxGT("Extrude")
#define MSG_RETRACT _UxGT("Retract")
//#define MSG_EXTRUDE _UxGT("Extrude")
//#define MSG_RETRACT _UxGT("Retract")
#define MSG_MOVE_AXIS _UxGT("Miči os")
#define MSG_BED_LEVELING _UxGT("Niveliraj bed")
#define MSG_LEVEL_BED _UxGT("Niveliraj bed")
#define MSG_MOVE_X _UxGT("Miči X")
#define MSG_MOVE_Y _UxGT("Miči Y")
#define MSG_MOVE_Z _UxGT("Miči Z")
#define MSG_MOVE_E _UxGT("Extruder")
//#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_Z_DIST _UxGT("Miči %smm")
#define MSG_MOVE_01MM _UxGT("Miči 0.1mm")
#define MSG_MOVE_1MM _UxGT("Miči 1mm")
@ -81,57 +81,57 @@
#define MSG_NOZZLE _UxGT("Dizna")
#define MSG_BED _UxGT("Bed")
#define MSG_FAN_SPEED _UxGT("Brzina ventilatora")
#define MSG_FLOW _UxGT("Flow")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_LCD_ON _UxGT("On")
#define MSG_LCD_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
//#define MSG_FLOW _UxGT("Flow")
//#define MSG_CONTROL _UxGT("Control")
//#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
//#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
//#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
//#define MSG_AUTOTEMP _UxGT("Autotemp")
//#define MSG_LCD_ON _UxGT("On")
//#define MSG_LCD_OFF _UxGT("Off")
//#define MSG_PID_P _UxGT("PID-P")
//#define MSG_PID_I _UxGT("PID-I")
//#define MSG_PID_D _UxGT("PID-D")
//#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Odaberi")
#define MSG_ACC _UxGT("Accel")
#define MSG_JERK _UxGT("Jerk")
#if IS_KINEMATIC
#define MSG_VA_JERK _UxGT("Va-jerk")
#define MSG_VB_JERK _UxGT("Vb-jerk")
#define MSG_VC_JERK _UxGT("Vc-jerk")
#else
#define MSG_VA_JERK _UxGT("Vx-jerk")
#define MSG_VB_JERK _UxGT("Vy-jerk")
#define MSG_VC_JERK _UxGT("Vz-jerk")
#endif
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
#if IS_KINEMATIC
#define MSG_ASTEPS _UxGT("Asteps/mm")
#define MSG_BSTEPS _UxGT("Bsteps/mm")
#define MSG_CSTEPS _UxGT("Csteps/mm")
#else
#define MSG_ASTEPS _UxGT("Xsteps/mm")
#define MSG_BSTEPS _UxGT("Ysteps/mm")
#define MSG_CSTEPS _UxGT("Zsteps/mm")
#endif
#define MSG_ESTEPS _UxGT("Esteps/mm")
#define MSG_E1STEPS _UxGT("E1steps/mm")
#define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_E5STEPS _UxGT("E5steps/mm")
#define MSG_E6STEPS _UxGT("E6steps/mm")
//#define MSG_ACC _UxGT("Accel")
//#define MSG_JERK _UxGT("Jerk")
//#if IS_KINEMATIC
// #define MSG_VA_JERK _UxGT("Va-jerk")
// #define MSG_VB_JERK _UxGT("Vb-jerk")
// #define MSG_VC_JERK _UxGT("Vc-jerk")
//#else
// #define MSG_VA_JERK _UxGT("Vx-jerk")
// #define MSG_VB_JERK _UxGT("Vy-jerk")
// #define MSG_VC_JERK _UxGT("Vz-jerk")
//#endif
//#define MSG_VE_JERK _UxGT("Ve-jerk")
//#define MSG_VMAX _UxGT("Vmax ")
//#define MSG_VMIN _UxGT("Vmin")
//#define MSG_VTRAV_MIN _UxGT("VTrav min")
//#define MSG_AMAX _UxGT("Amax ")
//#define MSG_A_RETRACT _UxGT("A-retract")
//#define MSG_A_TRAVEL _UxGT("A-travel")
//#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
//#if IS_KINEMATIC
// #define MSG_ASTEPS _UxGT("Asteps/mm")
// #define MSG_BSTEPS _UxGT("Bsteps/mm")
// #define MSG_CSTEPS _UxGT("Csteps/mm")
//#else
// #define MSG_ASTEPS _UxGT("Xsteps/mm")
// #define MSG_BSTEPS _UxGT("Ysteps/mm")
// #define MSG_CSTEPS _UxGT("Zsteps/mm")
//#endif
//#define MSG_ESTEPS _UxGT("Esteps/mm")
//#define MSG_E1STEPS _UxGT("E1steps/mm")
//#define MSG_E2STEPS _UxGT("E2steps/mm")
//#define MSG_E3STEPS _UxGT("E3steps/mm")
//#define MSG_E4STEPS _UxGT("E4steps/mm")
//#define MSG_E5STEPS _UxGT("E5steps/mm")
//#define MSG_E6STEPS _UxGT("E6steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperature")
#define MSG_MOTION _UxGT("Gibanje")
#define MSG_FILAMENT _UxGT("Filament")
//#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Kontrast LCD-a")
@ -141,52 +141,51 @@
#define MSG_REFRESH _UxGT("Osvježi")
#define MSG_WATCH _UxGT("Info screen")
#define MSG_PREPARE _UxGT("Pripremi")
#define MSG_TUNE _UxGT("Tune")
//#define MSG_TUNE _UxGT("Tune")
#define MSG_PAUSE_PRINT _UxGT("Pauziraj print")
#define MSG_RESUME_PRINT _UxGT("Nastavi print")
#define MSG_STOP_PRINT _UxGT("Zaustavi print")
#define MSG_MEDIA_MENU _UxGT("Printaj s SD kartice")
#define MSG_NO_MEDIA _UxGT("Nema SD kartice")
#define MSG_DWELL _UxGT("Sleep...")
//#define MSG_DWELL _UxGT("Sleep...")
#define MSG_USERWAIT _UxGT("Čekaj korisnika...")
#define MSG_PRINT_ABORTED _UxGT("Print otkazan")
#define MSG_NO_MOVE _UxGT("No move.")
#define MSG_KILLED _UxGT("KILLED. ")
//#define MSG_NO_MOVE _UxGT("No move.")
//#define MSG_KILLED _UxGT("KILLED. ")
#define MSG_STOPPED _UxGT("ZAUSTAVLJEN. ")
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
//#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
//#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")
//#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
//#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm")
//#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
//#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")
//#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
//#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Promijeni filament")
#define MSG_INIT_MEDIA _UxGT("Init. SD karticu")
#define MSG_CHANGE_MEDIA _UxGT("Promijeni SD karticu")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
//#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
//#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
//#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
//#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
//#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
//#define MSG_BABYSTEP_X _UxGT("Babystep X")
//#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
//#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
//#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Grijanje neuspješno")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_HALTED _UxGT("PRINTER HALTED")
#define MSG_PLEASE_RESET _UxGT("Please reset")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
//#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
//#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
//#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
//#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
//#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
//#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
//#define MSG_ERR_Z_HOMING _UxGT("Home XY first")
//#define MSG_HALTED _UxGT("PRINTER HALTED")
//#define MSG_PLEASE_RESET _UxGT("Please reset")
//#define MSG_SHORT_DAY _UxGT("d") // One character only
//#define MSG_SHORT_HOUR _UxGT("h") // One character only
//#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Grijanje...")
#define MSG_BED_HEATING _UxGT("Grijanje Bed-a...")
#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibracija")
@ -220,34 +219,34 @@
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
//#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
//#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Napajanje")
#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
//#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
//#define MSG_DAC_PERCENT _UxGT("Driver %")
//#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekaj početak")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamenta")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("promijeni")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekaj")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Umetni filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i pritisni tipku")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekaj početak")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamenta")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("promijeni")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekaj")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Umetni filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i pritisni tipku")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
//#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
//#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Pričekaj...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Pričekaj...")
//#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
//#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
//#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...")
#endif // LCD_HEIGHT < 4

6
Marlin/src/lcd/language/language_it.h

@ -113,7 +113,6 @@
#define MSG_Y_OFFSET _UxGT("2° ugello Y")
#define MSG_Z_OFFSET _UxGT("2° ugello Z")
#define MSG_UBL_DOING_G29 _UxGT("G29 in corso")
#define MSG_UBL_UNHOMED _UxGT("Home XYZ prima")
#define MSG_UBL_TOOLS _UxGT("Strumenti UBL")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale")
@ -348,8 +347,7 @@
#define MSG_MANUAL_DEPLOY _UxGT("Estendi Sonda-Z")
#define MSG_BLTOUCH_STOW _UxGT("Ritrai BLTouch")
#define MSG_MANUAL_STOW _UxGT("Ritrai Sonda-Z")
#define MSG_HOME _UxGT("Home") // Usato come MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("prima")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s prima")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset sonda Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -369,7 +367,7 @@
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP MIN PIATTO")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err: TEMP MAX CAMERA")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err: TEMP MIN CAMERA")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY prima")
#define MSG_HALTED _UxGT("STAMPANTE FERMATA")
#define MSG_PLEASE_RESET _UxGT("Riavviare prego")
#define MSG_SHORT_DAY _UxGT("g") // Un solo carattere

5
Marlin/src/lcd/language/language_jp-kana.h

@ -161,8 +161,7 @@
#define MSG_ZPROBE_OUT _UxGT("Zプローブ ベッドガイ") // "Z probe out. bed"
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch ジコシンダン") // "BLTouch Self-Test"
#define MSG_BLTOUCH_RESET _UxGT("BLTouch リセット") // "Reset BLTouch"
#define MSG_HOME _UxGT("サキニ") // "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("ヲフッキサセテクダサイ") // "first"
#define MSG_HOME_FIRST _UxGT("サキニ %s%s%s ヲフッキサセテクダサイ") // "Home ... first"
#define MSG_ZPROBE_ZOFFSET _UxGT("Zオフセット") // "Z Offset"
#define MSG_BABYSTEP_X _UxGT("Xジク ビドウ") // "Babystep X"
#define MSG_BABYSTEP_Y _UxGT("Yジク ビドウ") // "Babystep Y"
@ -175,7 +174,7 @@
#define MSG_ERR_MINTEMP _UxGT("エラー:サイテイオンミマン") // "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED _UxGT("エラー:ベッド サイコウオンチョウカ") // "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED _UxGT("エラー:ベッド サイテイオンミマン") // "Err: MINTEMP BED"
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST // "Home XY first"
#define MSG_ERR_Z_HOMING _UxGT("サキニ XY ヲフッキサセテクダサイ") // "Home XY first"
#define MSG_HALTED _UxGT("プリンターハテイシシマシタ") // "PRINTER HALTED"
#define MSG_PLEASE_RESET _UxGT("リセットシテクダサイ") // "Please reset"
#define MSG_SHORT_DAY _UxGT("d") // One character only

6
Marlin/src/lcd/language/language_ko_KR.h

@ -91,7 +91,6 @@
//#define MSG_Y_OFFSET _UxGT("2nd nozzle Y")
//#define MSG_Z_OFFSET _UxGT("2nd nozzle Z")
#define MSG_UBL_DOING_G29 _UxGT("오토레벨링 하기")
//#define MSG_UBL_UNHOMED _UxGT("Home XYZ first")
//#define MSG_UBL_TOOLS _UxGT("UBL Tools")
//#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
//#define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh")
@ -293,8 +292,7 @@
//#define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch")
//#define MSG_MANUAL_DEPLOY _UxGT("Deploy Z-Probe")
//#define MSG_MANUAL_STOW _UxGT("Stow Z-Probe")
//#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
//#define MSG_FIRST _UxGT("first")
//#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
//#define MSG_ZPROBE_ZOFFSET _UxGT("Probe Z Offset")
//#define MSG_BABYSTEP_X _UxGT("Babystep X")
//#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -309,7 +307,7 @@
//#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
//#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
//#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
//#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
//#define MSG_ERR_Z_HOMING _UxGT("Home XY first")
//#define MSG_HALTED _UxGT("PRINTER HALTED")
//#define MSG_PLEASE_RESET _UxGT("Please reset")
//#define MSG_SHORT_DAY _UxGT("d") // One character only

5
Marlin/src/lcd/language/language_nl.h

@ -176,8 +176,7 @@
#define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("Eerst")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s Eerst")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") //accepted English term in Dutch
#define MSG_BABYSTEP_X _UxGT("Babystap X")
#define MSG_BABYSTEP_Y _UxGT("Babystap Y")
@ -190,7 +189,7 @@
#define MSG_ERR_MINTEMP _UxGT("Err: Min. temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Max.tmp bed")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: Min.tmp bed")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY Eerst")
#define MSG_HALTED _UxGT("PRINTER GESTOPT")
#define MSG_PLEASE_RESET _UxGT("Reset A.U.B.")
#define MSG_SHORT_DAY _UxGT("d") // One character only. Keep English standard

5
Marlin/src/lcd/language/language_pl.h

@ -166,8 +166,7 @@
#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -180,7 +179,7 @@
#define MSG_ERR_MINTEMP _UxGT("Err min temp")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stołu")
#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stołu")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY first")
#define MSG_HALTED _UxGT("Drukarka zatrzym.")
#define MSG_PLEASE_RESET _UxGT("Proszę zresetować")
#define MSG_SHORT_DAY _UxGT("d") // One character only

6
Marlin/src/lcd/language/language_pt-br.h

@ -102,7 +102,6 @@
#define MSG_Z_OFFSET _UxGT("2o bico Z")
#define MSG_UBL_DOING_G29 _UxGT("Executando G29")
#define MSG_UBL_UNHOMED _UxGT("Fora da Origam")
#define MSG_UBL_TOOLS _UxGT("Ferramentas UBL")
#define MSG_UBL_LEVEL_BED _UxGT("Nivel. Mesa Unif.")
#define MSG_UBL_MANUAL_MESH _UxGT("Fazer malha manual")
@ -311,8 +310,7 @@
#define MSG_MANUAL_DEPLOY _UxGT("Estender Sonda-Z")
#define MSG_MANUAL_STOW _UxGT("Recolher Sonda-Z")
#define MSG_HOME _UxGT("Home")
#define MSG_FIRST _UxGT("Primeiro")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s Primeiro")
#define MSG_ZPROBE_ZOFFSET _UxGT("Compensar Sonda em Z")
#define MSG_BABYSTEP_X _UxGT("Passinho X")
#define MSG_BABYSTEP_Y _UxGT("Passinho Y")
@ -327,7 +325,7 @@
#define MSG_ERR_MINTEMP _UxGT("Erro:Temp Mínima")
#define MSG_ERR_MAXTEMP_BED _UxGT("Erro:Temp Mesa Máx")
#define MSG_ERR_MINTEMP_BED _UxGT("Erro:Temp Mesa Mín")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Home XY Primeiro")
#define MSG_HALTED _UxGT("IMPRESSORA PAROU")
#define MSG_PLEASE_RESET _UxGT("Favor resetar")
#define MSG_SHORT_DAY _UxGT("d")

3
Marlin/src/lcd/language/language_pt.h

@ -162,8 +162,7 @@
#define MSG_INIT_MEDIA _UxGT("Inici. cartão SD")
#define MSG_CHANGE_MEDIA _UxGT("Trocar cartão SD")
#define MSG_ZPROBE_OUT _UxGT("Sensor fora/base")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_HOME_FIRST _UxGT("Home %s%s%s first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Desvio Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")

6
Marlin/src/lcd/language/language_ru.h

@ -96,7 +96,6 @@
#define MSG_Z_OFFSET _UxGT("2-е сопло Z")
#define MSG_UBL_DOING_G29 _UxGT("Выполняем G29")
#define MSG_UBL_UNHOMED _UxGT("Паркуем сначала XYZ")
#define MSG_UBL_TOOLS _UxGT("Утилиты UBL")
#define MSG_UBL_LEVEL_BED _UxGT("Калибровка UBL")
#define MSG_UBL_MANUAL_MESH _UxGT("Постр. сетку от руки")
@ -316,8 +315,7 @@
// TODO: TouchMI Probe, Manual deploy/stow
#define MSG_HOME _UxGT("Паркуй") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("сначала")
#define MSG_HOME_FIRST _UxGT("Паркуй %s%s%s сначала")
#define MSG_ZPROBE_ZOFFSET _UxGT("Смещение Z")
#define MSG_BABYSTEP_X _UxGT("Микрошаг X")
#define MSG_BABYSTEP_Y _UxGT("Микрошаг Y")
@ -334,7 +332,7 @@
#define MSG_ERR_MAXTEMP_BED _UxGT("Ошибка: Т стола макс")
#define MSG_ERR_MINTEMP_BED _UxGT("Ошибка: Т стола мин.")
// TODO: Heated chamber
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Паркуй XY сначала")
#define MSG_HALTED _UxGT("ПРИНТЕР ОСТАНОВЛЕН")
#define MSG_PLEASE_RESET _UxGT("Сделайте сброс")
#define MSG_SHORT_DAY _UxGT("д") // One character only

6
Marlin/src/lcd/language/language_sk.h

@ -120,7 +120,6 @@
#define MSG_Y_OFFSET _UxGT("2. tryska Y")
#define MSG_Z_OFFSET _UxGT("2. tryska Z")
#define MSG_UBL_DOING_G29 _UxGT("Vykonávam G29")
#define MSG_UBL_UNHOMED _UxGT("Prejdite domov")
#define MSG_UBL_TOOLS _UxGT("Nástroje UBL")
#define MSG_UBL_LEVEL_BED _UxGT("UBL rovnanie")
#define MSG_LCD_TILTING_MESH _UxGT("Vyrovnávam bod")
@ -357,8 +356,7 @@
#define MSG_MANUAL_DEPLOY_TOUCHMI _UxGT("Zasunúť TouchMI")
#define MSG_MANUAL_DEPLOY _UxGT("Zasunúť sondu Z")
#define MSG_MANUAL_STOW _UxGT("Vysunúť sondu Z")
#define MSG_HOME _UxGT("Najskôr os") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("domov")
#define MSG_HOME_FIRST _UxGT("Najskôr os %s%s%s domov")
#define MSG_ZPROBE_ZOFFSET _UxGT("Ofset sondy Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
@ -378,7 +376,7 @@
#define MSG_ERR_MINTEMP_BED _UxGT("Chyba: MINTEMP PODL.")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Chyba: MAXTEMP KOMO.")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Chyba: MINTEMP KOMO.")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Najskôr os XY domov")
#define MSG_HALTED _UxGT("TLAČIAREŇ ZASTAVENÁ")
#define MSG_PLEASE_RESET _UxGT("Reštartuje ju")
#define MSG_SHORT_DAY _UxGT("d")

4
Marlin/src/lcd/language/language_tr.h

@ -101,7 +101,6 @@
#define MSG_Y_OFFSET _UxGT("2. nozul Y")
#define MSG_Z_OFFSET _UxGT("2. nozul Z")
#define MSG_UBL_DOING_G29 _UxGT("G29 Çalışıyor")
#define MSG_UBL_UNHOMED _UxGT("Ilk XYZ Sıfırla")
#define MSG_UBL_TOOLS _UxGT("UBL Araçları")
#define MSG_UBL_LEVEL_BED _UxGT("UBL Yatak Hizalama")
#define MSG_UBL_MANUAL_MESH _UxGT("Elle Mesh Oluştur")
@ -309,8 +308,7 @@
#define MSG_BLTOUCH_STOW _UxGT("BLTouch Kapat")
#define MSG_MANUAL_DEPLOY _UxGT("Z-Prob Aç")
#define MSG_MANUAL_STOW _UxGT("Z-Sensör Kapat")
#define MSG_HOME _UxGT("Sıfırla")
#define MSG_FIRST _UxGT("Önce")
#define MSG_HOME_FIRST _UxGT("Sıfırla %s%s%s Önce")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Miniadım X")
#define MSG_BABYSTEP_Y _UxGT("Miniadım Y")

5
Marlin/src/lcd/language/language_uk.h

@ -159,8 +159,7 @@
#define MSG_ZPROBE_OUT _UxGT("Z дет. не в межах")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Само-Тест")
#define MSG_BLTOUCH_RESET _UxGT("Скинути BLTouch")
#define MSG_HOME _UxGT("Дім") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("перший")
#define MSG_HOME_FIRST _UxGT("Дім %s%s%s перший")
#define MSG_ZPROBE_ZOFFSET _UxGT("Зміщення Z")
#define MSG_BABYSTEP_X _UxGT("Мікрокрок X")
#define MSG_BABYSTEP_Y _UxGT("Мікрокрок Y")
@ -168,7 +167,7 @@
#define MSG_ENDSTOP_ABORT _UxGT("невдача кінцевика")
#define MSG_HEATING_FAILED_LCD _UxGT("Невдалий нагрів")
#define MSG_THERMAL_RUNAWAY _UxGT("ЗБІЙ ТЕМПЕРАТУРИ")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Дім XY перший")
#define MSG_HALTED _UxGT("ПРИНТЕР ЗУПИНЕНО")
#define MSG_PLEASE_RESET _UxGT("Перезавантажте")
#define MSG_SHORT_DAY _UxGT("д") // One character only

6
Marlin/src/lcd/language/language_vi.h

@ -88,7 +88,6 @@
#define MSG_MESH_EDIT_Z _UxGT("Giá trị Z") // Z Value
#define MSG_USER_MENU _UxGT("Các lệnh tự chọn") // Custom Commands
#define MSG_UBL_DOING_G29 _UxGT("Đang chạy G29") // Doing G29
#define MSG_UBL_UNHOMED _UxGT("Về nhà XYZ trước")
#define MSG_UBL_TOOLS _UxGT("Công cụ UBL") // UBL tools
#define MSG_UBL_LEVEL_BED _UxGT("San Lấp Bàn Thống Nhất (UBL)") // Unified Bed Leveling
#define MSG_IDEX_MENU _UxGT("chế độ IDEX") // IDEX Mode
@ -307,8 +306,7 @@
#define MSG_BLTOUCH_STOW _UxGT("Cất BLTouch") // Stow BLTouch
#define MSG_MANUAL_DEPLOY _UxGT("Đem Đầu Dò-Z") // Deploy Z-Probe
#define MSG_MANUAL_STOW _UxGT("Cất Đầu Dò-Z") // Stow Z-Probe
#define MSG_HOME _UxGT("Về nhà") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("Trước")
#define MSG_HOME_FIRST _UxGT("Về nhà %s%s%s Trước")
#define MSG_ZPROBE_ZOFFSET _UxGT("Đầu Dò Bù Đắp Z") // Probe Z Offset
#define MSG_BABYSTEP_X _UxGT("Nhít X") // Babystep X
#define MSG_BABYSTEP_Y _UxGT("Nhít Y")
@ -323,7 +321,7 @@
#define MSG_ERR_MINTEMP _UxGT("Điều sai: nhiệt độ tối thiểu") // Err: MINTEMP
#define MSG_ERR_MAXTEMP_BED _UxGT("Điều sai: nhiệt độ bàn tối đa") // Err: MAXTEMP BED
#define MSG_ERR_MINTEMP_BED _UxGT("Điều sai: nhiệt độ bàn tối thiểu") // Err: MINTEMP BED
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("Về nhà XY Trước") // Home XY First
#define MSG_HALTED _UxGT("MÁY IN ĐÃ DỪNG LẠI") // PRINTER HALTED
#define MSG_PLEASE_RESET _UxGT("Xin bặt lại") // Please reset
#define MSG_SHORT_DAY _UxGT("n") // d - ngày - One character only

6
Marlin/src/lcd/language/language_zh_CN.h

@ -79,7 +79,6 @@
#define MSG_USER_MENU _UxGT("定制命令") // "Custom Commands"
#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29"
#define MSG_UBL_UNHOMED _UxGT("先回XYZ原点") // "Home XYZ first"
#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools"
#define MSG_UBL_LEVEL_BED _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling"
#define MSG_UBL_MANUAL_MESH _UxGT("手工创设网格") // "Manually Build Mesh"
@ -274,8 +273,7 @@
#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch"
#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch"
#define MSG_BLTOUCH_STOW _UxGT("装载BLTouch") // "Stow BLTouch"
#define MSG_HOME _UxGT("归位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("先") //"first"
#define MSG_HOME_FIRST _UxGT("归位 %s%s%s 先") //"Home ... first"
#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"
#define MSG_BABYSTEP_X _UxGT("微量调整X轴") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
#define MSG_BABYSTEP_Y _UxGT("微量调整Y轴") //"Babystep Y"
@ -288,7 +286,7 @@
#define MSG_ERR_MINTEMP _UxGT("错误:最低温度") //"Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED _UxGT("错误:最高热床温度") //"Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED _UxGT("错误:最低热床温度") //"Err: MINTEMP BED"
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("归位 XY 先") // "Home XY First"
#define MSG_HALTED _UxGT("打印停机") //"PRINTER HALTED"
#define MSG_PLEASE_RESET _UxGT("请重置") //"Please reset"
#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only

6
Marlin/src/lcd/language/language_zh_TW.h

@ -79,7 +79,6 @@
#define MSG_USER_MENU _UxGT("客制命令") // "Custom Commands"
#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29"
#define MSG_UBL_UNHOMED _UxGT("先回XYZ原點") // "Home XYZ first"
#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools"
#define MSG_UBL_LEVEL_BED _UxGT("統一熱床調平(UBL)") // "Unified Bed Leveling"
#define MSG_UBL_MANUAL_MESH _UxGT("手工建网") // "Manually Build Mesh"
@ -274,8 +273,7 @@
#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch"
#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch"
#define MSG_BLTOUCH_STOW _UxGT("裝載BLTouch") // "Stow BLTouch"
#define MSG_HOME _UxGT("歸位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("先") //"first"
#define MSG_HOME_FIRST _UxGT("歸位 %s%s%s 先") //"Home ... first"
#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset"
#define MSG_BABYSTEP_X _UxGT("微量調整X軸") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
#define MSG_BABYSTEP_Y _UxGT("微量調整Y軸") //"Babystep Y"
@ -288,7 +286,7 @@
#define MSG_ERR_MINTEMP _UxGT("錯誤:最低溫度") //"Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED _UxGT("錯誤:最高熱床溫度") //"Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED _UxGT("錯誤:最低熱床溫度") //"Err: MINTEMP BED"
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_ERR_Z_HOMING _UxGT("歸位 XY 先") //"Home XY First"
#define MSG_HALTED _UxGT("印表機停機") //"PRINTER HALTED"
#define MSG_PLEASE_RESET _UxGT("請重置") //"Please reset"
#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only

36
Marlin/src/module/motion.cpp

@ -1030,26 +1030,32 @@ void prepare_move_to_destination() {
set_current_from_destination();
}
bool axis_unhomed_error(const bool x/*=true*/, const bool y/*=true*/, const bool z/*=true*/) {
uint8_t axes_need_homing(uint8_t axis_bits/*=0x07*/) {
#if ENABLED(HOME_AFTER_DEACTIVATE)
const bool xx = x && !TEST(axis_known_position, X_AXIS),
yy = y && !TEST(axis_known_position, Y_AXIS),
zz = z && !TEST(axis_known_position, Z_AXIS);
#define HOMED_FLAGS axis_known_position
#else
const bool xx = x && !TEST(axis_homed, X_AXIS),
yy = y && !TEST(axis_homed, Y_AXIS),
zz = z && !TEST(axis_homed, Z_AXIS);
#define HOMED_FLAGS axis_homed
#endif
if (xx || yy || zz) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_HOME " ");
if (xx) SERIAL_CHAR('X');
if (yy) SERIAL_CHAR('Y');
if (zz) SERIAL_CHAR('Z');
SERIAL_ECHOLNPGM(" " MSG_FIRST);
// Clear test bits that are homed
if (TEST(axis_bits, X_AXIS) && TEST(HOMED_FLAGS, X_AXIS)) CBI(axis_bits, X_AXIS);
if (TEST(axis_bits, Y_AXIS) && TEST(HOMED_FLAGS, Y_AXIS)) CBI(axis_bits, Y_AXIS);
if (TEST(axis_bits, Z_AXIS) && TEST(HOMED_FLAGS, Z_AXIS)) CBI(axis_bits, Z_AXIS);
return axis_bits;
}
bool axis_unhomed_error(uint8_t axis_bits/*=0x07*/) {
if ((axis_bits = axes_need_homing(axis_bits))) {
static const char home_first[] PROGMEM = MSG_HOME_FIRST;
char msg[sizeof(home_first)];
sprintf_P(msg, home_first,
TEST(axis_bits, X_AXIS) ? "X" : "",
TEST(axis_bits, Y_AXIS) ? "Y" : "",
TEST(axis_bits, Z_AXIS) ? "Z" : ""
);
SERIAL_ECHO_START();
SERIAL_ECHO(msg);
#if HAS_DISPLAY
ui.status_printf_P(0, PSTR(MSG_HOME " %s%s%s " MSG_FIRST), xx ? MSG_X : "", yy ? MSG_Y : "", zz ? MSG_Z : "");
ui.set_status(msg);
#endif
return true;
}

3
Marlin/src/module/motion.h

@ -211,7 +211,8 @@ void restore_feedrate_and_scaling();
// Homing
//
bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true);
uint8_t axes_need_homing(uint8_t axis_bits=0x07);
bool axis_unhomed_error(uint8_t axis_bits=0x07);
#if ENABLED(NO_MOTION_BEFORE_HOMING)
#define MOTION_CONDITIONS (IsRunning() && !axis_unhomed_error())

11
Marlin/src/module/probe.cpp

@ -373,12 +373,11 @@ bool set_probe_deployed(const bool deploy) {
do_probe_raise(_MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_CLEARANCE_DEPLOY_PROBE));
#if EITHER(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY)
#if ENABLED(Z_PROBE_SLED)
#define _AUE_ARGS true, false, false
#else
#define _AUE_ARGS
#endif
if (axis_unhomed_error(_AUE_ARGS)) {
if (axis_unhomed_error(
#if ENABLED(Z_PROBE_SLED)
_BV(X_AXIS)
#endif
)) {
SERIAL_ERROR_MSG(MSG_STOP_UNHOMED);
stop();
return true;

2
Marlin/src/module/tool_change.cpp

@ -158,7 +158,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) { _line_to_current(fr_a
#endif
);
if (axis_unhomed_error(true, false, false)) return;
if (axis_unhomed_error(_BV(X_AXIS))) return;
/**
* Z Lift and Nozzle Offset shift ar defined in caller method to work equal with any Multi Hotend realization

Loading…
Cancel
Save