From b18816fcbf64faba618829fc510490168253aab6 Mon Sep 17 00:00:00 2001 From: jbrazio Date: Mon, 29 Feb 2016 10:45:22 +0000 Subject: [PATCH] Fine tuned XYJERK. Disallowed the Z_PROBE_OFFSET_RANGE_MAX to be greater than zero. --- Marlin/example_configurations/Hephestos_2/Configuration.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 9ef8de5c97..51f6a1df4c 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -597,7 +597,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously) -#define DEFAULT_XYJERK 20.0 // (mm/sec) +#define DEFAULT_XYJERK 15.0 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec) #define DEFAULT_EJERK 2.0 // (mm/sec) @@ -613,8 +613,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l #if ENABLED(CUSTOM_M_CODES) #if ENABLED(AUTO_BED_LEVELING_FEATURE) #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851 - #define Z_PROBE_OFFSET_RANGE_MIN -20 - #define Z_PROBE_OFFSET_RANGE_MAX 20 + #define Z_PROBE_OFFSET_RANGE_MIN -5 + #define Z_PROBE_OFFSET_RANGE_MAX 0 #endif #endif