Remove extra gcode. prefix

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -134,7 +134,7 @@ void GcodeSuite::G29() {
         BUZZ(100, 659);
         BUZZ(100, 698);
 
-        gcode.home_all_axes();
+        home_all_axes();
         set_bed_leveling_enabled(true);
 
         #if ENABLED(MESH_G28_REST_ORIGIN)

Marlin/src/gcode/feature/L6470/M916-918.cpp

@@ -106,10 +106,10 @@ void GcodeSuite::M916() {
 
     // turn the motor(s) both directions
     sprintf_P(gcode_string, PSTR("G0 %s%4.3f  F%4.3f"), temp_axis_string, position_min, final_feedrate);
-    gcode.process_subcommands_now_P(gcode_string);
+    process_subcommands_now_P(gcode_string);
 
     sprintf_P(gcode_string, PSTR("G0 %s%4.3f  F%4.3f"), temp_axis_string, position_max, final_feedrate);
-    gcode.process_subcommands_now_P(gcode_string);
+    process_subcommands_now_P(gcode_string);
 
     // get the status after the motors have stopped
     planner.synchronize();
@@ -226,10 +226,10 @@ void GcodeSuite::M917() {
     DEBUG_ECHOLNPAIR("   OCD threshold : ", (ocd_th_val + 1) * 375);
 
     sprintf_P(gcode_string, PSTR("G0 %s%4.3f  F%4.3f"), temp_axis_string, position_min, final_feedrate);
-    gcode.process_subcommands_now_P(gcode_string);
+    process_subcommands_now_P(gcode_string);
 
     sprintf_P(gcode_string, PSTR("G0 %s%4.3f  F%4.3f"), temp_axis_string, position_max, final_feedrate);
-    gcode.process_subcommands_now_P(gcode_string);
+    process_subcommands_now_P(gcode_string);
 
     planner.synchronize();
 
@@ -263,7 +263,7 @@ void GcodeSuite::M917() {
             L6470.set_param(axis_index[j], L6470_KVAL_HOLD, kval_hold);
         }
         DEBUG_ECHOLNPGM(".");
-        gcode.reset_stepper_timeout(); // reset_stepper_timeout to keep steppers powered
+        reset_stepper_timeout(); // reset_stepper_timeout to keep steppers powered
         watchdog_reset();   // beat the dog
         safe_delay(5000);
         status_composite_temp = 0;
@@ -518,10 +518,10 @@ void GcodeSuite::M918() {
     DEBUG_ECHOLNPAIR("...feedrate = ", current_feedrate);
 
     sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_min, current_feedrate);
-    gcode.process_subcommands_now_P(gcode_string);
+    process_subcommands_now_P(gcode_string);
 
     sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_max, current_feedrate);
-    gcode.process_subcommands_now_P(gcode_string);
+    process_subcommands_now_P(gcode_string);
 
     planner.synchronize();
 

Marlin/src/gcode/feature/pause/M600.cpp

@@ -98,7 +98,7 @@ void GcodeSuite::M600() {
 
   #if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)
     // Don't allow filament change without homing first
-    if (axis_unhomed_error()) gcode.home_all_axes();
+    if (axis_unhomed_error()) home_all_axes();
   #endif
 
   #if EXTRUDERS > 1