yangwenxiong
6 years ago
committed by
Scott Lahteine
Scott Lahteine
6 changed files with 185 additions and 0 deletions
@ -0,0 +1,134 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
|
||||
|
#ifndef TARGET_STM32F1 |
||||
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
||||
|
#endif |
||||
|
|
||||
|
#ifndef BOARD_NAME |
||||
|
#define BOARD_NAME "BIGTREE SKR mini V1.1" |
||||
|
#endif |
||||
|
|
||||
|
// Ignore temp readings during develpment.
|
||||
|
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_MIN_PIN PC2 |
||||
|
#define X_MAX_PIN PA2 |
||||
|
#define Y_MIN_PIN PC1 |
||||
|
#define Y_MAX_PIN PA1 |
||||
|
#define Z_MIN_PIN PC0 |
||||
|
#define Z_MAX_PIN PC3 |
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
|
||||
|
/**
|
||||
|
* TODO: Currently using same Enable pin for all steppers. |
||||
|
*/ |
||||
|
|
||||
|
#define X_STEP_PIN PC6 |
||||
|
#define X_DIR_PIN PC7 |
||||
|
#define X_ENABLE_PIN PB15 |
||||
|
|
||||
|
#define Y_STEP_PIN PB13 |
||||
|
#define Y_DIR_PIN PB14 |
||||
|
#define Y_ENABLE_PIN PB12 |
||||
|
|
||||
|
#define Z_STEP_PIN PB10 |
||||
|
#define Z_DIR_PIN PB11 |
||||
|
#define Z_ENABLE_PIN PB2 |
||||
|
|
||||
|
#define E0_STEP_PIN PC5 |
||||
|
#define E0_DIR_PIN PB0 |
||||
|
#define E0_ENABLE_PIN PC4 |
||||
|
|
||||
|
#if ENABLED(TMC_USE_SW_SPI) |
||||
|
#define TMC_SW_SCK PB3 |
||||
|
#define TMC_SW_MISO PB4 |
||||
|
#define TMC_SW_MOSI PB5 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Heaters / Fans
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PA8 |
||||
|
#define FAN_PIN PC8 |
||||
|
#define HEATER_BED_PIN PC9 |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_BED_PIN PB1 // Analog Input
|
||||
|
#define TEMP_0_PIN PA0 // Analog Input
|
||||
|
|
||||
|
//
|
||||
|
// LCD Pins
|
||||
|
//
|
||||
|
|
||||
|
/**
|
||||
|
* _____ _____ |
||||
|
* NC | · · | GND 5V | · · | GND |
||||
|
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6) |
||||
|
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4) |
||||
|
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN) |
||||
|
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER) |
||||
|
* ￣￣ ￣￣ |
||||
|
* EXP2 EXP1 |
||||
|
*/ |
||||
|
|
||||
|
#if ENABLED(ULTRA_LCD) |
||||
|
|
||||
|
#define BEEPER_PIN PC10 |
||||
|
#define BTN_ENC PC11 |
||||
|
#define LCD_PINS_RS PC12 |
||||
|
|
||||
|
#define BTN_EN1 PD2 |
||||
|
#define BTN_EN2 PB8 |
||||
|
|
||||
|
#define LCD_PINS_ENABLE PB6 |
||||
|
#define LCD_PINS_D4 PC13 |
||||
|
|
||||
|
#if ENABLED(ULTIPANEL) |
||||
|
#define LCD_PINS_D5 PB7 |
||||
|
#define LCD_PINS_D6 PC15 |
||||
|
#define LCD_PINS_D7 PC14 |
||||
|
#endif |
||||
|
|
||||
|
#endif // ULTRA_LCD
|
||||
|
|
||||
|
//
|
||||
|
// SD Card
|
||||
|
//
|
||||
|
|
||||
|
// Marlin uses the SD drive attached to the LCD
|
||||
|
//#define STM32_SD_LCD
|
||||
|
|
||||
|
#ifdef STM32_SD_LCD |
||||
|
#define SD_DETECT_PIN PB9 |
||||
|
#define ENABLE_SPI3 |
||||
|
#else |
||||
|
#define SD_DETECT_PIN PA3 |
||||
|
#endif |
||||
@ -0,0 +1,14 @@ |
|||||
|
MEMORY |
||||
|
{ |
||||
|
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 |
||||
|
rom (rx) : ORIGIN = 0x08007000, LENGTH = 256K - 28K |
||||
|
} |
||||
|
|
||||
|
/* Provide memory region aliases for common.inc */ |
||||
|
REGION_ALIAS("REGION_TEXT", rom); |
||||
|
REGION_ALIAS("REGION_DATA", ram); |
||||
|
REGION_ALIAS("REGION_BSS", ram); |
||||
|
REGION_ALIAS("REGION_RODATA", rom); |
||||
|
|
||||
|
/* Let common.inc handle the real work. */ |
||||
|
INCLUDE common.inc |
||||
@ -0,0 +1,8 @@ |
|||||
|
Import("env") |
||||
|
|
||||
|
# Relocate firmware from 0x08000000 to 0x08007000 |
||||
|
for define in env['CPPDEFINES']: |
||||
|
if define[0] == "VECT_TAB_ADDR": |
||||
|
env['CPPDEFINES'].remove(define) |
||||
|
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000")) |
||||
|
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/STM32F1_SKR_MINI.ld") |
||||
Loading…
Reference in new issue