diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp index 3409ade705..80dce5df06 100644 --- a/Marlin/ConfigurationStore.cpp +++ b/Marlin/ConfigurationStore.cpp @@ -37,7 +37,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) // the default values are used whenever there is a change to the data, to prevent // wrong data being written to the variables. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order. -#define EEPROM_VERSION "V10" +#define EEPROM_VERSION "V11" #ifdef EEPROM_SETTINGS void Config_StoreSettings() @@ -59,6 +59,9 @@ void Config_StoreSettings() EEPROM_WRITE_VAR(i,add_homeing); #ifdef DELTA EEPROM_WRITE_VAR(i,endstop_adj); + EEPROM_WRITE_VAR(i,delta_radius); + EEPROM_WRITE_VAR(i,delta_diagonal_rod); + EEPROM_WRITE_VAR(i,delta_segments_per_second); #endif #ifndef ULTIPANEL int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; @@ -156,7 +159,14 @@ void Config_PrintSettings() SERIAL_ECHOPAIR(" M666 X",endstop_adj[0] ); SERIAL_ECHOPAIR(" Y" ,endstop_adj[1] ); SERIAL_ECHOPAIR(" Z" ,endstop_adj[2] ); - SERIAL_ECHOLN(""); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M665 L",delta_diagonal_rod ); + SERIAL_ECHOPAIR(" R" ,delta_radius ); + SERIAL_ECHOPAIR(" S" ,delta_segments_per_second ); + SERIAL_ECHOLN(""); #endif #ifdef PIDTEMP SERIAL_ECHO_START; @@ -199,7 +209,10 @@ void Config_RetrieveSettings() EEPROM_READ_VAR(i,max_e_jerk); EEPROM_READ_VAR(i,add_homeing); #ifdef DELTA - EEPROM_READ_VAR(i,endstop_adj); + EEPROM_READ_VAR(i,endstop_adj); + EEPROM_READ_VAR(i,delta_radius); + EEPROM_READ_VAR(i,delta_diagonal_rod); + EEPROM_READ_VAR(i,delta_segments_per_second); #endif #ifndef ULTIPANEL int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed; @@ -264,7 +277,11 @@ void Config_ResetDefault() max_e_jerk=DEFAULT_EJERK; add_homeing[0] = add_homeing[1] = add_homeing[2] = 0; #ifdef DELTA - endstop_adj[0] = endstop_adj[1] = endstop_adj[2] = 0; + endstop_adj[0] = endstop_adj[1] = endstop_adj[2] = 0; + delta_radius= DELTA_RADIUS; + delta_diagonal_rod= DELTA_DIAGONAL_ROD; + delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND; + recalc_delta_settings(delta_radius, delta_diagonal_rod); #endif #ifdef ULTIPANEL plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 7a4b864fde..d79fc019fb 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -209,6 +209,10 @@ extern float current_position[NUM_AXIS] ; extern float add_homeing[3]; #ifdef DELTA extern float endstop_adj[3]; +extern float delta_radius; +extern float delta_diagonal_rod; +extern float delta_segments_per_second; +void recalc_delta_settings(float radius, float diagonal_rod); #endif extern float min_pos[3]; extern float max_pos[3]; diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 0023279d8b..d8a105dc3f 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -161,6 +161,7 @@ // M503 - print the current settings (from memory not from eeprom) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] +// M665 - set delta configurations // M666 - set delta endstop adjustemnt // M605 - Set dual x-carriage movement mode: S [ X R ] // M907 - Set digital trimpot motor current using axis codes. @@ -246,9 +247,21 @@ int EtoPPressure=0; #endif #ifdef DELTA -float delta[3] = {0.0, 0.0, 0.0}; -#endif - + float delta[3] = {0.0, 0.0, 0.0}; + #define SIN_60 0.8660254037844386 + #define COS_60 0.5 + // these are the default values, can be overriden with M665 + float delta_radius= DELTA_RADIUS; + float delta_tower1_x= -SIN_60*delta_radius; // front left tower + float delta_tower1_y= -COS_60*delta_radius; + float delta_tower2_x= SIN_60*delta_radius; // front right tower + float delta_tower2_y= -COS_60*delta_radius; + float delta_tower3_x= 0.0; // back middle tower + float delta_tower3_y= delta_radius; + float delta_diagonal_rod= DELTA_DIAGONAL_ROD; + float delta_diagonal_rod_2= sq(delta_diagonal_rod); + float delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND; +#endif //=========================================================================== //=============================private variables============================= @@ -2267,6 +2280,19 @@ void process_commands() } break; #ifdef DELTA + case 665: // M665 set delta configurations L R S + if(code_seen('L')) { + delta_diagonal_rod= code_value(); + } + if(code_seen('R')) { + delta_radius= code_value(); + } + if(code_seen('S')) { + delta_segments_per_second= code_value(); + } + + recalc_delta_settings(delta_radius, delta_diagonal_rod); + break; case 666: // M666 set delta endstop adjustemnt for(int8_t i=0; i < 3; i++) { @@ -3101,19 +3127,30 @@ void clamp_to_software_endstops(float target[3]) } #ifdef DELTA +void recalc_delta_settings(float radius, float diagonal_rod) +{ + delta_tower1_x= -SIN_60*radius; // front left tower + delta_tower1_y= -COS_60*radius; + delta_tower2_x= SIN_60*radius; // front right tower + delta_tower2_y= -COS_60*radius; + delta_tower3_x= 0.0; // back middle tower + delta_tower3_y= radius; + delta_diagonal_rod_2= sq(diagonal_rod); +} + void calculate_delta(float cartesian[3]) { - delta[X_AXIS] = sqrt(DELTA_DIAGONAL_ROD_2 - - sq(DELTA_TOWER1_X-cartesian[X_AXIS]) - - sq(DELTA_TOWER1_Y-cartesian[Y_AXIS]) + delta[X_AXIS] = sqrt(delta_diagonal_rod_2 + - sq(delta_tower1_x-cartesian[X_AXIS]) + - sq(delta_tower1_y-cartesian[Y_AXIS]) ) + cartesian[Z_AXIS]; - delta[Y_AXIS] = sqrt(DELTA_DIAGONAL_ROD_2 - - sq(DELTA_TOWER2_X-cartesian[X_AXIS]) - - sq(DELTA_TOWER2_Y-cartesian[Y_AXIS]) + delta[Y_AXIS] = sqrt(delta_diagonal_rod_2 + - sq(delta_tower2_x-cartesian[X_AXIS]) + - sq(delta_tower2_y-cartesian[Y_AXIS]) ) + cartesian[Z_AXIS]; - delta[Z_AXIS] = sqrt(DELTA_DIAGONAL_ROD_2 - - sq(DELTA_TOWER3_X-cartesian[X_AXIS]) - - sq(DELTA_TOWER3_Y-cartesian[Y_AXIS]) + delta[Z_AXIS] = sqrt(delta_diagonal_rod_2 + - sq(delta_tower3_x-cartesian[X_AXIS]) + - sq(delta_tower3_y-cartesian[Y_AXIS]) ) + cartesian[Z_AXIS]; /* SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); @@ -3143,7 +3180,7 @@ void prepare_move() if (cartesian_mm < 0.000001) { cartesian_mm = abs(difference[E_AXIS]); } if (cartesian_mm < 0.000001) { return; } float seconds = 6000 * cartesian_mm / feedrate / feedmultiply; - int steps = max(1, int(DELTA_SEGMENTS_PER_SECOND * seconds)); + int steps = max(1, int(delta_segments_per_second * seconds)); // SERIAL_ECHOPGM("mm="); SERIAL_ECHO(cartesian_mm); // SERIAL_ECHOPGM(" seconds="); SERIAL_ECHO(seconds); // SERIAL_ECHOPGM(" steps="); SERIAL_ECHOLN(steps); diff --git a/Marlin/createTemperatureLookupMarlin.py b/Marlin/createTemperatureLookupMarlin.py index 77187b8099..01c602dffa 100755 --- a/Marlin/createTemperatureLookupMarlin.py +++ b/Marlin/createTemperatureLookupMarlin.py @@ -16,9 +16,9 @@ Usage: python createTemperatureLookup.py [options] Options: -h, --help show this help --rp=... pull-up resistor - --t0=ttt:rrr low temperature temperature:resistance point (around 25C) - --t1=ttt:rrr middle temperature temperature:resistance point (around 150C) - --t2=ttt:rrr high temperature temperature:resistance point (around 250C) + --t1=ttt:rrr low temperature temperature:resistance point (around 25C) + --t2=ttt:rrr middle temperature temperature:resistance point (around 150C) + --t3=ttt:rrr high temperature temperature:resistance point (around 250C) --num-temps=... the number of temperature points to calculate (default: 20) """ @@ -98,7 +98,8 @@ def main(argv): try: opts, args = getopt.getopt(argv, "h", ["help", "rp=", "t1=", "t2=", "t3=", "num-temps="]) - except getopt.GetoptError: + except getopt.GetoptError as err: + print str(err) usage() sys.exit(2) diff --git a/Marlin/example_configurations/delta/Configuration.h b/Marlin/example_configurations/delta/Configuration.h index 0d232d372f..c724484bd9 100644 --- a/Marlin/example_configurations/delta/Configuration.h +++ b/Marlin/example_configurations/delta/Configuration.h @@ -51,6 +51,7 @@ // 65 = Azteeg X1 // 66 = Melzi with ATmega1284 (MaKr3d version) // 67 = Azteeg X3 +// 68 = Azteeg X3 Pro // 7 = Ultimaker // 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare) // 77 = 3Drag Controller @@ -119,18 +120,6 @@ // Effective horizontal distance bridged by diagonal push rods. #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET) -#define DELTA_DIAGONAL_ROD_2 sq(DELTA_DIAGONAL_ROD) - -// Effective X/Y positions of the three vertical towers. -#define SIN_60 0.8660254037844386 -#define COS_60 0.5 -#define DELTA_TOWER1_X -SIN_60*DELTA_RADIUS // front left tower -#define DELTA_TOWER1_Y -COS_60*DELTA_RADIUS -#define DELTA_TOWER2_X SIN_60*DELTA_RADIUS // front right tower -#define DELTA_TOWER2_Y -COS_60*DELTA_RADIUS -#define DELTA_TOWER3_X 0.0 // back middle tower -#define DELTA_TOWER3_Y DELTA_RADIUS - //=========================================================================== //=============================Thermal Settings ============================ //=========================================================================== diff --git a/Marlin/example_configurations/delta/Configuration_adv.h b/Marlin/example_configurations/delta/Configuration_adv.h index fcf6ff570f..4d6e78b4d9 100644 --- a/Marlin/example_configurations/delta/Configuration_adv.h +++ b/Marlin/example_configurations/delta/Configuration_adv.h @@ -270,6 +270,12 @@ // Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) #define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro +//#define DIGIPOT_I2C +// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 +#define DIGIPOT_I2C_NUM_CHANNELS 8 +// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS +#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} //=========================================================================== //=============================Additional Features===========================