andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Clean up trailing spaces

vanilla_fb_2.0.x
Scott Lahteine 5 years ago
parent
138d0622ee
commit
aea60d9450
15 changed files with 43 additions and 43 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/Configuration_adv.h
  2. 4
      Marlin/src/HAL/STM32F1/sdio.cpp
  3. 2
      Marlin/src/feature/spindle_laser.h
  4. 2
      Marlin/src/gcode/config/M200-M205.cpp
  5. 4
      Marlin/src/lcd/menu/menu_led.cpp
  6. 4
      Marlin/src/module/planner.cpp
  7. 2
      Marlin/src/module/planner.h
  8. 2
      Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h
  9. 38
      buildroot/share/PlatformIO/variants/CHITU_F103/board.cpp
  10. 2
      buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103z_dfu.ld
  11. 2
      buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103zc.ld
  12. 2
      buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103zd.ld
  13. 2
      buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103ze.ld
  14. 16
      buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards_setup.cpp
  15. 2
      buildroot/share/sublime/RepRapTools/syntax_test_G-code.gcode

2
Marlin/Configuration_adv.h
View File

@ -1689,7 +1689,7 @@
// increasing the height the probe is raised to.
// #define PTC_PROBE_RAISE 15U
// If the probe is outside of the defined range, use linear extrapolation using the closest
// If the probe is outside of the defined range, use linear extrapolation using the closest
// point and the PTC_LINEAR_EXTRAPOLATION'th next point. E.g. if set to 4 it will use data[0]
// and data[4] to perform linear extrapolation for values below PTC_SAMPLE_START.
// #define PTC_LINEAR_EXTRAPOLATION 4

4
Marlin/src/HAL/STM32F1/sdio.cpp
View File

@ -102,7 +102,7 @@ bool SDIO_ReadBlock_DMA(uint32_t blockAddress, uint8_t *data) {
}
while (!SDIO_GET_FLAG(SDIO_STA_DATAEND | SDIO_STA_TRX_ERROR_FLAGS)) { /* wait */ }
//If there were SDIO errors, do not wait DMA.
if (SDIO->STA & SDIO_STA_TRX_ERROR_FLAGS) {
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
@ -118,7 +118,7 @@ bool SDIO_ReadBlock_DMA(uint32_t blockAddress, uint8_t *data) {
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
return false;
}
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
if (SDIO->STA & SDIO_STA_RXDAVL) {

2
Marlin/src/feature/spindle_laser.h
View File

@ -233,7 +233,7 @@ public:
// Inline modes of all other functions; all enable planner inline power control
static inline void set_inline_enabled(const bool enable) {
if (enable)
inline_power(cpwr_to_upwr(SPEED_POWER_STARTUP));
inline_power(cpwr_to_upwr(SPEED_POWER_STARTUP));
else {
isReady = false;
unitPower = menuPower = 0;

2
Marlin/src/gcode/config/M200-M205.cpp
View File

@ -65,7 +65,7 @@
SERIAL_ECHOLNPGM("?L value out of range (0-20).");
}
#endif
planner.calculate_volumetric_multipliers();
}

4
Marlin/src/lcd/menu/menu_led.cpp
View File

@ -32,7 +32,7 @@
#if ENABLED(LED_CONTROL_MENU)
#include "../../feature/leds/leds.h"
#if ENABLED(LED_COLOR_PRESETS)
void menu_led_presets() {
START_MENU();
@ -71,7 +71,7 @@
#if ENABLED(CASE_LIGHT_MENU)
#include "../../feature/caselight.h"
#if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
void menu_case_light() {
START_MENU();

4
Marlin/src/module/planner.cpp
View File

@ -2107,9 +2107,9 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
* TERN(HAS_MIXER_SYNC_CHANNEL, MIXING_STEPPERS, 1);
if (cs > max_fr) NOMORE(speed_factor, max_fr / cs); //respect max feedrate on any movement (doesn't matter if E axes only or not)
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
const feedRate_t max_vfr = volumetric_extruder_feedrate_limit[extruder]
const feedRate_t max_vfr = volumetric_extruder_feedrate_limit[extruder]
* TERN(HAS_MIXER_SYNC_CHANNEL, MIXING_STEPPERS, 1);
// TODO: Doesn't work properly for joined segments. Set MIN_STEPS_PER_SEGMENT 1 as workaround.

2
Marlin/src/module/planner.h
View File

@ -493,7 +493,7 @@ class Planner {
// Update multipliers based on new diameter measurements
static void calculate_volumetric_multipliers();
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
// Update pre calculated extruder feedrate limits based on volumetric values
static void calculate_volumetric_extruder_limit(const uint8_t e);

2
Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h
View File

@ -31,7 +31,7 @@
#define BOARD_INFO_NAME "RUMBA32"
#if NO_EEPROM_SELECTED
#if MB(RUMBA32_V1_0)
#if MB(RUMBA32_V1_0)
#define FLASH_EEPROM_EMULATION
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#elif MB(RUMBA32_V1_1)

38
buildroot/share/PlatformIO/variants/CHITU_F103/board.cpp
View File

@ -71,19 +71,19 @@ void boardInit(void) {
extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
/*
gpio_dev *gpio_device; GPIO device
gpio_dev *gpio_device; GPIO device
timer_dev *timer_device; Pin's timer device, if any.
const adc_dev *adc_device; ADC device, if any.
uint8 gpio_bit; Pin's GPIO port bit.
uint8 timer_channel; Timer channel, or 0 if none.
uint8 adc_channel; Pin ADC channel, or ADCx if none.
const adc_dev *adc_device; ADC device, if any.
uint8 gpio_bit; Pin's GPIO port bit.
uint8 timer_channel; Timer channel, or 0 if none.
uint8 adc_channel; Pin ADC channel, or ADCx if none.
*/
{&gpioa, &timer2, &adc1, 0, 1, 0}, /* PA0 */
{&gpioa, &timer2, &adc1, 1, 2, 1}, /* PA1 */
{&gpioa, &timer2, &adc1, 2, 3, 2}, /* PA2 */
{&gpioa, &timer2, &adc1, 3, 4, 3}, /* PA3 */
{&gpioa, NULL, &adc1, 4, 0, 4}, /* PA4 */
{&gpioa, NULL, &adc1, 4, 0, 4}, /* PA4 */
{&gpioa, NULL, &adc1, 5, 0, 5}, /* PA5 */
{&gpioa, &timer3, &adc1, 6, 1, 6}, /* PA6 */
{&gpioa, &timer3, &adc1, 7, 2, 7}, /* PA7 */
@ -91,7 +91,7 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpioa, &timer1, NULL, 9, 2, ADCx}, /* PA9 */
{&gpioa, &timer1, NULL, 10, 3, ADCx}, /* PA10 */
{&gpioa, NULL, NULL, 11, 0, ADCx}, /* PA11 */
{&gpioa, NULL, NULL, 12, 0, ADCx}, /* PA12 */
{&gpioa, NULL, NULL, 12, 0, ADCx}, /* PA12 */
{&gpioa, NULL, NULL, 13, 0, ADCx}, /* PA13 */
{&gpioa, NULL, NULL, 14, 0, ADCx}, /* PA14 */
{&gpioa, NULL, NULL, 15, 0, ADCx}, /* PA15 */
@ -120,13 +120,13 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpioc, NULL, &adc1, 3, 0, 13}, /* PC3 */
{&gpioc, NULL, &adc1, 4, 0, 14}, /* PC4 */
{&gpioc, NULL, &adc1, 5, 0, 15}, /* PC5 */
{&gpioc, &timer8, NULL, 6, 1, ADCx}, /* PC6 */
{&gpioc, &timer8, NULL, 6, 1, ADCx}, /* PC6 */
{&gpioc, &timer8, NULL, 7, 2, ADCx}, /* PC7 */
{&gpioc, &timer8, NULL, 8, 3, ADCx}, /* PC8 */
{&gpioc, &timer8, NULL, 9, 4, ADCx}, /* PC9 */
{&gpioc, NULL, NULL, 10, 0, ADCx}, /* PC10 UART4_TX/SDIO_D2 */
{&gpioc, NULL, NULL, 11, 0, ADCx}, /* PC11 UART4_RX/SDIO_D3 */
{&gpioc, NULL, NULL, 12, 0, ADCx}, /* PC12 UART5_TX/SDIO_CK */
{&gpioc, NULL, NULL, 12, 0, ADCx}, /* PC12 UART5_TX/SDIO_CK */
{&gpioc, NULL, NULL, 13, 0, ADCx}, /* PC13 TAMPER-RTC */
{&gpioc, NULL, NULL, 14, 0, ADCx}, /* PC14 OSC32_IN */
{&gpioc, NULL, NULL, 15, 0, ADCx}, /* PC15 OSC32_OUT */
@ -134,7 +134,7 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpiod, NULL, NULL, 0, 0, ADCx} , /* PD0 OSC_IN */
{&gpiod, NULL, NULL, 1, 0, ADCx} , /* PD1 OSC_OUT */
{&gpiod, NULL, NULL, 2, 0, ADCx} , /* PD2 TIM3_ETR/UART5_RX SDIO_CMD */
{&gpiod, NULL, NULL, 3, 0, ADCx} , /* PD3 FSMC_CLK */
{&gpiod, NULL, NULL, 4, 0, ADCx} , /* PD4 FSMC_NOE */
{&gpiod, NULL, NULL, 5, 0, ADCx} , /* PD5 FSMC_NWE */
@ -145,10 +145,10 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpiod, NULL, NULL, 10, 0, ADCx} , /* PD10 FSMC_D15 */
{&gpiod, NULL, NULL, 11, 0, ADCx} , /* PD11 FSMC_A16 */
{&gpiod, NULL, NULL, 12, 0, ADCx} , /* PD12 FSMC_A17 */
{&gpiod, NULL, NULL, 13, 0, ADCx} , /* PD13 FSMC_A18 */
{&gpiod, NULL, NULL, 13, 0, ADCx} , /* PD13 FSMC_A18 */
{&gpiod, NULL, NULL, 14, 0, ADCx} , /* PD14 FSMC_D0 */
{&gpiod, NULL, NULL, 15, 0, ADCx} , /* PD15 FSMC_D1 */
{&gpioe, NULL, NULL, 0, 0, ADCx} , /* PE0 */
{&gpioe, NULL, NULL, 1, 0, ADCx} , /* PE1 */
{&gpioe, NULL, NULL, 2, 0, ADCx} , /* PE2 */
@ -162,9 +162,9 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpioe, NULL, NULL, 10, 0, ADCx} , /* PE10 */
{&gpioe, NULL, NULL, 11, 0, ADCx} , /* PE11 */
{&gpioe, NULL, NULL, 12, 0, ADCx} , /* PE12 */
{&gpioe, NULL, NULL, 13, 0, ADCx} , /* PE13 */
{&gpioe, NULL, NULL, 13, 0, ADCx} , /* PE13 */
{&gpioe, NULL, NULL, 14, 0, ADCx} , /* PE14 */
{&gpioe, NULL, NULL, 15, 0, ADCx} , /* PE15 */
{&gpioe, NULL, NULL, 15, 0, ADCx} , /* PE15 */
{&gpiof, NULL, NULL, 0, 0, ADCx} , /* PF0 */
{&gpiof, NULL, NULL, 1, 0, ADCx} , /* PF1 */
@ -179,10 +179,10 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpiof, NULL, NULL, 10, 0, ADCx} , /* PF10 */
{&gpiof, NULL, NULL, 11, 0, ADCx} , /* PF11 */
{&gpiof, NULL, NULL, 12, 0, ADCx} , /* PF12 */
{&gpiof, NULL, NULL, 13, 0, ADCx} , /* PF13 */
{&gpiof, NULL, NULL, 13, 0, ADCx} , /* PF13 */
{&gpiof, NULL, NULL, 14, 0, ADCx} , /* PF14 */
{&gpiof, NULL, NULL, 15, 0, ADCx} , /* PF15 */
{&gpiof, NULL, NULL, 15, 0, ADCx} , /* PF15 */
{&gpiog, NULL, NULL, 0, 0, ADCx} , /* PG0 */
{&gpiog, NULL, NULL, 1, 0, ADCx} , /* PG1 */
{&gpiog, NULL, NULL, 2, 0, ADCx} , /* PG2 */
@ -196,9 +196,9 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
{&gpiog, NULL, NULL, 10, 0, ADCx} , /* PG10 */
{&gpiog, NULL, NULL, 11, 0, ADCx} , /* PG11 */
{&gpiog, NULL, NULL, 12, 0, ADCx} , /* PG12 */
{&gpiog, NULL, NULL, 13, 0, ADCx} , /* PG13 */
{&gpiog, NULL, NULL, 13, 0, ADCx} , /* PG13 */
{&gpiog, NULL, NULL, 14, 0, ADCx} , /* PG14 */
{&gpiog, NULL, NULL, 15, 0, ADCx} /* PG15 */
{&gpiog, NULL, NULL, 15, 0, ADCx} /* PG15 */
};
/* Basically everything that is defined as having a timer us PWM */

2
buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103z_dfu.ld
View File

@ -1,5 +1,5 @@
/*
* libmaple linker script
* libmaple linker script
*
* This build puts .text (and .rodata) in Flash, and
* .data/.bss/heap (of course) in SRAM, but links starting at the

2
buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103zc.ld
View File

@ -1,5 +1,5 @@
/*
* libmaple linker script
* libmaple linker script
*
* This build puts .text (and .rodata) in Flash, and
* .data/.bss/heap (of course) in SRAM, but links starting at the

2
buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103zd.ld
View File

@ -1,5 +1,5 @@
/*
* libmaple linker script
* libmaple linker script
*
* This build puts .text (and .rodata) in Flash, and
* .data/.bss/heap (of course) in SRAM, but links starting at the

2
buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103ze.ld
View File

@ -1,5 +1,5 @@
/*
* libmaple linker script
* libmaple linker script
*
* This build puts .text (and .rodata) in Flash, and
* .data/.bss/heap (of course) in SRAM, but links starting at the

16
buildroot/share/PlatformIO/variants/CHITU_F103/wirish/boards_setup.cpp
View File

@ -87,8 +87,8 @@ namespace wirish {
#if F_CPU == 72000000
rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1_5);
#elif F_CPU == 48000000
rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1);
#endif
rcc_set_prescaler(RCC_PRESCALER_USB, RCC_USB_SYSCLK_DIV_1);
#endif
}
__weak void board_setup_gpio(void) {
@ -96,18 +96,18 @@ namespace wirish {
}
__weak void board_setup_usb(void) {
#ifdef SERIAL_USB
#ifdef GENERIC_BOOTLOADER
#ifdef SERIAL_USB
#ifdef GENERIC_BOOTLOADER
//Reset the USB interface on generic boards - developed by Victor PV
gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_OUTPUT_PP);
gpio_write_bit(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit,0);
for(volatile unsigned int i=0;i<512;i++);// Only small delay seems to be needed, and USB pins will get configured in Serial.begin
gpio_set_mode(PIN_MAP[PA12].gpio_device, PIN_MAP[PA12].gpio_bit, GPIO_INPUT_FLOATING);
#endif
#endif
Serial.begin();// Roger Clark. Changed SerialUSB to Serial for Arduino sketch compatibility
#endif

2
buildroot/share/sublime/RepRapTools/syntax_test_G-code.gcode
View File

@ -93,7 +93,7 @@ N234 G1 X-5 Y+2 *64 error
; ^constant.numeric.checksum.gcode
; ^invalid.error.syntax.gcode
N234 M107 *64
N234 M107 *64
; ^-invalid.error.syntax.gcode
M92 E304.5:304.5:420:420:420:420 ; EOL Comment

Write Preview
Loading…
Cancel
Save