Tweaks to HAL format and order

Marlin/src/HAL/HAL_DUE/HAL.h

@@ -41,26 +41,13 @@
 #include "watchdog_Due.h"
 #include "HAL_timers_Due.h"
 
-//
-// Defines
-//
 #define NUM_SERIAL 1
+// Required before the include or compilation fails
 #define MYSERIAL0 customizedSerial
 
-// We need the previous define before the include, or compilation bombs...
 #include "MarlinSerial_Due.h"
 #include "MarlinSerialUSB_Due.h"
 
-#ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
-#endif
-
-#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
-#define ISRS_ENABLED() (!__get_PRIMASK())
-#define ENABLE_ISRS()  __enable_irq()
-#define DISABLE_ISRS() __disable_irq()
-
 // On AVR this is in math.h?
 #define square(x) ((x)*(x))
 
@@ -86,19 +73,18 @@
 #define RST_SOFTWARE   32
 #define RST_BACKUP     64
 
-// --------------------------------------------------------------------------
-// Types
-// --------------------------------------------------------------------------
-
 typedef int8_t pin_t;
 
 #define HAL_SERVO_LIB Servo
 
-// --------------------------------------------------------------------------
+//
-// Public Variables
+// Interrupts
-// --------------------------------------------------------------------------
+//
-
+#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
-extern uint16_t HAL_adc_result;     // result of last ADC conversion
+#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
+#define ISRS_ENABLED() (!__get_PRIMASK())
+#define ENABLE_ISRS()  __enable_irq()
+#define DISABLE_ISRS() __disable_irq()
 
 void cli(void);                     // Disable interrupts
 void sei(void);                     // Enable interrupts
@@ -106,13 +92,9 @@ void sei(void);                     // Enable interrupts
 void HAL_clear_reset_source(void);  // clear reset reason
 uint8_t HAL_get_reset_source(void); // get reset reason
 
-void _delay_ms(const int delay);
+//
-
+// SPI: Extended functions taking a channel number (Hardware SPI only)
-int freeMemory(void);
+//
-
-/**
- * SPI: Extended functions taking a channel number (hardware SPI only)
- */
 
 // Write single byte to specified SPI channel
 void spiSend(uint32_t chan, byte b);
@@ -123,18 +105,22 @@ void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
 // Read single byte from specified SPI channel
 uint8_t spiRec(uint32_t chan);
 
-/**
+//
- * EEPROM
+// EEPROM
- */
+//
-
 void eeprom_write_byte(unsigned char *pos, unsigned char value);
 unsigned char eeprom_read_byte(unsigned char *pos);
 void eeprom_read_block (void *__dst, const void *__src, size_t __n);
 void eeprom_update_block (const void *__src, void *__dst, size_t __n);
 
-/**
+//
- * ADC
+// ADC
- */
+//
+extern uint16_t HAL_adc_result;     // result of last ADC conversion
+
+#ifndef analogInputToDigitalPin
+  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
+#endif
 
 #define HAL_ANALOG_SELECT(pin)
 
@@ -154,16 +140,16 @@ uint16_t HAL_getAdcFreerun(uint8_t chan, bool wait_for_conversion = false);
 void HAL_enable_AdcFreerun(void);
 //void HAL_disable_AdcFreerun(uint8_t chan);
 
-/**
+//
- * Pin Map
+// Pin Map
- */
+//
 #define GET_PIN_MAP_PIN(index) index
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
 
-/**
+//
- * Tone
+// Tone
- */
+//
 void toneInit();
 void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
 void noTone(const pin_t _pin);
@@ -174,6 +160,12 @@ void noTone(const pin_t _pin);
 void HAL_idletask(void);
 void HAL_init(void);
 
+//
+// Utility functions
+//
+void _delay_ms(const int delay);
+int freeMemory(void);
+
 #ifdef __cplusplus
   extern "C" {
 #endif

Marlin/src/HAL/HAL_LPC1768/HAL.h

@@ -64,10 +64,11 @@ extern "C" volatile uint32_t _millis;
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
 #include "watchdog.h"
-#include "serial.h"
 #include "HAL_timers.h"
-#include "HardwareSerial.h"
 
+//
+// Default graphical display delays
+//
 #ifndef ST7920_DELAY_1
   #define ST7920_DELAY_1 DELAY_NS(600)
 #endif
@@ -78,6 +79,12 @@ extern "C" volatile uint32_t _millis;
   #define ST7920_DELAY_3 DELAY_NS(750)
 #endif
 
+//
+// Arduino-style serial ports
+//
+#include "serial.h"
+#include "HardwareSerial.h"
+
 extern HalSerial usb_serial;
 
 #if !WITHIN(SERIAL_PORT, -1, 3)
@@ -126,24 +133,34 @@ extern HalSerial usb_serial;
   #define NUM_SERIAL 1
 #endif
 
+//
+// Interrupts
+//
 #define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
 #define CRITICAL_SECTION_END    if (!primask) __enable_irq()
 #define ISRS_ENABLED() (!__get_PRIMASK())
 #define ENABLE_ISRS()  __enable_irq()
 #define DISABLE_ISRS() __disable_irq()
 
-//Utility functions
+//
+// Utility functions
+//
 int freeMemory(void);
 
-// SPI: Extended functions which take a channel number (hardware SPI only)
+//
-/** Write single byte to specified SPI channel */
+// SPI: Extended functions taking a channel number (Hardware SPI only)
+//
+
+// Write single byte to specified SPI channel
 void spiSend(uint32_t chan, byte b);
-/** Write buffer to specified SPI channel */
+// Write buffer to specified SPI channel
 void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
-/** Read single byte from specified SPI channel */
+// Read single byte from specified SPI channel
 uint8_t spiRec(uint32_t chan);
 
+//
 // ADC
+//
 #define HAL_ANALOG_SELECT(pin) HAL_adc_enable_channel(pin)
 #define HAL_START_ADC(pin)     HAL_adc_start_conversion(pin)
 #define HAL_READ_ADC()         HAL_adc_get_result()

Marlin/src/HAL/HAL_STM32F1/HAL.h

@@ -73,7 +73,7 @@
   #error "SERIAL_PORT must be from -1 to 3"
 #endif
 #if SERIAL_PORT == -1
-extern USBSerial SerialUSB;
+  extern USBSerial SerialUSB;
   #define MYSERIAL0 SerialUSB
 #elif SERIAL_PORT == 0
   #define MYSERIAL0 Serial
@@ -93,7 +93,7 @@ extern USBSerial SerialUSB;
   #endif
   #define NUM_SERIAL 2
   #if SERIAL_PORT_2 == -1
-  extern USBSerial SerialUSB;
+    extern USBSerial SerialUSB;
     #define MYSERIAL1 SerialUSB
   #elif SERIAL_PORT_2 == 0
     #define MYSERIAL1 Serial