diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 2dcac8015d..67fbaafde9 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -505,9 +505,9 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
     #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
   #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
     #error "BABYSTEP_ZPROBE_OFFSET requires a probe."
-  #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !ENABLED(DOGLCD)
+  #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(DOGLCD)
     #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD."
-  #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !ENABLED(BABYSTEP_ZPROBE_OFFSET)
+  #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET)
     #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
   #endif
 #endif
@@ -1524,7 +1524,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
   // is necessary in order to reset the stallGuard indication between the initial movement of all three
   // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
   // clearing the stallGuard activated status is found.
-  #if ENABLED(DELTA) && !ENABLED(STEALTHCHOP)
+  #if ENABLED(DELTA) && DISABLED(STEALTHCHOP)
     #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP."
   #elif X_SENSORLESS && X_HOME_DIR == -1 && (DISABLED(X_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMIN))
     #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
@@ -1619,7 +1619,7 @@ static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too m
   #endif
 #endif
 
-#if ENABLED(POWER_LOSS_RECOVERY) && !ENABLED(ULTIPANEL)
+#if ENABLED(POWER_LOSS_RECOVERY) && DISABLED(ULTIPANEL)
   #error "POWER_LOSS_RECOVERY currently requires an LCD Controller."
 #endif
 
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index ee38000860..d33f2e1fd9 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -1515,7 +1515,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
     // Change filament
     //
     #if ENABLED(ADVANCED_PAUSE_FEATURE)
-      #if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
+      #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
         if (thermalManager.targetHotEnoughToExtrude(active_extruder))
           MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
         else
@@ -2744,7 +2744,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
     //
     #if ENABLED(ADVANCED_PAUSE_FEATURE)
       if (!IS_SD_FILE_OPEN) {
-        #if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
+        #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
           if (thermalManager.targetHotEnoughToExtrude(active_extruder))
             MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0"));
           else
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 9afb6fd297..15fcc937dc 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -37,7 +37,7 @@
   #include "../module/servo.h"
 #endif
 
-#if ENABLED(EXT_SOLENOID) && !ENABLED(PARKING_EXTRUDER)
+#if ENABLED(EXT_SOLENOID) && DISABLED(PARKING_EXTRUDER)
   #include "../feature/solenoid.h"
 #endif
 
@@ -478,7 +478,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
 
       planner.synchronize();
 
-      #if ENABLED(EXT_SOLENOID) && !ENABLED(PARKING_EXTRUDER)
+      #if ENABLED(EXT_SOLENOID) && DISABLED(PARKING_EXTRUDER)
         disable_all_solenoids();
         enable_solenoid_on_active_extruder();
       #endif
diff --git a/Marlin/src/pins/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/pins_BIQU_BQ111_A4.h
index 23522b1354..1b481e2e41 100644
--- a/Marlin/src/pins/pins_BIQU_BQ111_A4.h
+++ b/Marlin/src/pins/pins_BIQU_BQ111_A4.h
@@ -115,7 +115,7 @@
   #define LCD_PINS_ENABLE     P0_18   // (MOSI) EXP1-3
   #define LCD_PINS_D4         P0_15   // (SCK)  EXP1-5
 
-  #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && !ENABLED(DOGLCD)
+  #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD)
     #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
   #endif
 
diff --git a/Marlin/src/pins/pins_FORMBOT.h b/Marlin/src/pins/pins_FORMBOT.h
index ce3b93831e..bcc02e67b8 100644
--- a/Marlin/src/pins/pins_FORMBOT.h
+++ b/Marlin/src/pins/pins_FORMBOT.h
@@ -146,7 +146,7 @@
 
 #define FAN_PIN             9
 
-#if !ENABLED(FILAMENT_RUNOUT_SENSOR)
+#if DISABLED(FILAMENT_RUNOUT_SENSOR)
   #define FAN1_PIN          4
 #endif