From ac2b23f5743a822e04296b2e7fbbb6d8fd855128 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 11 Apr 2015 20:06:48 -0700 Subject: [PATCH] Homing fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Prevent `Z_SAFE_HOMING` from homing Z twice in some cases - Allow `G28` with XYZ values of 0 to explicitly set the position - Don’t add `home_offset` when setting XYZ explicitly in `G28` - Add `code_has_value` function to check for the presence of a numeric value (could just test for space or nul to allow other types of values) --- Marlin/Marlin_main.cpp | 163 ++++++++++++++++++++++------------------- 1 file changed, 89 insertions(+), 74 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 37dc7af234..ddf8036de7 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -850,6 +850,11 @@ void get_command() } +float code_has_value() { + char c = *(strchr_pointer + 1); + return (c >= '0' && c <= '9') || c == '-' || c == '+' || c == '.'; +} + float code_value() { float ret; char *e = strchr(strchr_pointer, 'E'); @@ -1814,21 +1819,24 @@ inline void gcode_G28() { home_all_axis = !(homeX || homeY || homeZ) || (homeX && homeY && homeZ); - #if Z_HOME_DIR > 0 // If homing away from BED do Z first + if (home_all_axis || homeZ) { - if (home_all_axis || homeZ) HOMEAXIS(Z); + #if Z_HOME_DIR > 0 // If homing away from BED do Z first - #elif !defined(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0 + HOMEAXIS(Z); - // Raise Z before homing any other axes - if (home_all_axis || homeZ) { - destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed + #elif !defined(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0 + + // Raise Z before homing any other axes + // (Does this need to be "negative home direction?" Why not just use Z_RAISE_BEFORE_HOMING?) + destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); feedrate = max_feedrate[Z_AXIS] * 60; line_to_destination(); st_synchronize(); - } - #endif + #endif + + } // home_all_axis || homeZ #ifdef QUICK_HOME @@ -1897,97 +1905,104 @@ inline void gcode_G28() { if (home_all_axis || homeY) HOMEAXIS(Y); // Set the X position, if included - // Adds the home_offset as well, which may be wrong - if (code_seen(axis_codes[X_AXIS])) { - float v = code_value(); - if (v) current_position[X_AXIS] = v - #ifndef SCARA - + home_offset[X_AXIS] - #endif - ; - } + if (code_seen(axis_codes[X_AXIS]) && code_has_value()) + current_position[X_AXIS] = code_value(); // Set the Y position, if included - // Adds the home_offset as well, which may be wrong - if (code_seen(axis_codes[Y_AXIS])) { - float v = code_value(); - if (v) current_position[Y_AXIS] = v - #ifndef SCARA - + home_offset[Y_AXIS] - #endif - ; - } + if (code_seen(axis_codes[Y_AXIS]) && code_has_value()) + current_position[Y_AXIS] = code_value(); // Home Z last if homing towards the bed #if Z_HOME_DIR < 0 - #ifndef Z_SAFE_HOMING + if (home_all_axis || homeZ) { - if (home_all_axis || homeZ) HOMEAXIS(Z); + #ifdef Z_SAFE_HOMING - #else // Z_SAFE_HOMING + if (home_all_axis) { - if (home_all_axis) { - destination[X_AXIS] = round(Z_SAFE_HOMING_X_POINT - X_PROBE_OFFSET_FROM_EXTRUDER); - destination[Y_AXIS] = round(Z_SAFE_HOMING_Y_POINT - Y_PROBE_OFFSET_FROM_EXTRUDER); - destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed - feedrate = XY_TRAVEL_SPEED; - current_position[Z_AXIS] = 0; + current_position[Z_AXIS] = 0; + sync_plan_position(); - sync_plan_position(); - line_to_destination(); - st_synchronize(); - current_position[X_AXIS] = destination[X_AXIS]; - current_position[Y_AXIS] = destination[Y_AXIS]; + // + // Set the probe (or just the nozzle) destination to the safe homing point + // + // NOTE: If current_position[X_AXIS] or current_position[Y_AXIS] were set above + // then this may not work as expected. + destination[X_AXIS] = round(Z_SAFE_HOMING_X_POINT - X_PROBE_OFFSET_FROM_EXTRUDER); + destination[Y_AXIS] = round(Z_SAFE_HOMING_Y_POINT - Y_PROBE_OFFSET_FROM_EXTRUDER); + destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed + feedrate = XY_TRAVEL_SPEED; + // This could potentially move X, Y, Z all together + line_to_destination(); + st_synchronize(); - HOMEAXIS(Z); - } + // Set current X, Y is the Z_SAFE_HOMING_POINT minus PROBE_OFFSET_FROM_EXTRUDER + current_position[X_AXIS] = destination[X_AXIS]; + current_position[Y_AXIS] = destination[Y_AXIS]; - // Let's see if X and Y are homed and probe is inside bed area. - if (homeZ) { - - if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) { - - float cpx = current_position[X_AXIS], cpy = current_position[Y_AXIS]; - if ( cpx >= X_MIN_POS - X_PROBE_OFFSET_FROM_EXTRUDER - && cpx <= X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER - && cpy >= Y_MIN_POS - Y_PROBE_OFFSET_FROM_EXTRUDER - && cpy <= Y_MAX_POS - Y_PROBE_OFFSET_FROM_EXTRUDER) { - current_position[Z_AXIS] = 0; - plan_set_position(cpx, cpy, 0, current_position[E_AXIS]); - destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); // Set destination away from bed - feedrate = max_feedrate[Z_AXIS] * 60; // max_feedrate is in mm/s. line_to_destination is feedrate/60. - line_to_destination(); - st_synchronize(); - HOMEAXIS(Z); - } - else { + // Home the Z axis + HOMEAXIS(Z); + } + + else if (homeZ) { // Don't need to Home Z twice + + // Let's see if X and Y are homed + if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) { + + // Make sure the probe is within the physical limits + // NOTE: This doesn't necessarily ensure the probe is also within the bed! + float cpx = current_position[X_AXIS], cpy = current_position[Y_AXIS]; + if ( cpx >= X_MIN_POS - X_PROBE_OFFSET_FROM_EXTRUDER + && cpx <= X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER + && cpy >= Y_MIN_POS - Y_PROBE_OFFSET_FROM_EXTRUDER + && cpy <= Y_MAX_POS - Y_PROBE_OFFSET_FROM_EXTRUDER) { + // Set the plan current position to X, Y, 0 + current_position[Z_AXIS] = 0; + plan_set_position(cpx, cpy, 0, current_position[E_AXIS]); // = sync_plan_position + + // Set Z destination away from bed and raise the axis + // NOTE: This should always just be Z_RAISE_BEFORE_HOMING unless...??? + destination[Z_AXIS] = -Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS); + feedrate = max_feedrate[Z_AXIS] * 60; // feedrate (mm/m) = max_feedrate (mm/s) + line_to_destination(); + st_synchronize(); + + // Home the Z axis + HOMEAXIS(Z); + } + else { LCD_MESSAGEPGM(MSG_ZPROBE_OUT); SERIAL_ECHO_START; SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT); + } } - } - else { - LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN); - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM(MSG_POSITION_UNKNOWN); - } - } + else { + LCD_MESSAGEPGM(MSG_POSITION_UNKNOWN); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_POSITION_UNKNOWN); + } + + } // !home_all_axes && homeZ - #endif // Z_SAFE_HOMING + #else // !Z_SAFE_HOMING + + HOMEAXIS(Z); + + #endif // !Z_SAFE_HOMING + + } // home_all_axis || homeZ #endif // Z_HOME_DIR < 0 // Set the Z position, if included - // Adds the home_offset as well, which may be wrong - if (code_seen(axis_codes[Z_AXIS])) { - float v = code_value(); - if (v) current_position[Z_AXIS] = v + home_offset[Z_AXIS]; - } + if (code_seen(axis_codes[Z_AXIS]) && code_has_value()) + current_position[Z_AXIS] = code_value(); #if defined(ENABLE_AUTO_BED_LEVELING) && (Z_HOME_DIR < 0) if (home_all_axis || homeZ) current_position[Z_AXIS] += zprobe_zoffset; // Add Z_Probe offset (the distance is negative) #endif + sync_plan_position(); #endif // else DELTA