From a613bcad2d9aba6b11d647266bd78e8adfb7cf65 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 10 May 2019 20:39:09 -0500 Subject: [PATCH] Fix some spelling --- Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp | 2 +- .../src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp | 2 +- .../u8g/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction | 2 +- .../HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp | 2 +- Marlin/src/lcd/dogm/ultralcd_DOGM.cpp | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp index 18ed18269b..3807b92f1e 100644 --- a/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp +++ b/Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp @@ -115,7 +115,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va u8g_Delay(5); - u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */ + u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: command mode */ break; case U8G_COM_MSG_STOP: diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp index 58631a1e17..b47863c68d 100644 --- a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp @@ -109,7 +109,7 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v case U8G_COM_MSG_INIT: //u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH); //u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH); - //u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */ + //u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: unknown mode */ u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]); u8g_com_ssd_I2C_start_sequence(u8g); diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction index 8b2cab7b0a..08f8ce526e 100644 --- a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction +++ b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_sw_i2c.cpp under construction @@ -178,7 +178,7 @@ uint8_t u8g_com_HAL_LPC1768_ssd_sw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v //u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH); //u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH); - //u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: unknown mode */ + //u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: unknown mode */ u8g_i2c_init_sw(u8g->pin_list[U8G_PI_I2C_OPTION]); u8g_com_ssd_I2C_start_sequence_sw(u8g); diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp index 0931f7858a..37182cd0c4 100644 --- a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp @@ -98,7 +98,7 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar u8g_SetPILevel(u8g, U8G_PI_SCK, 0); u8g_SetPILevel(u8g, U8G_PI_MOSI, 0); - u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */ + u8g->pin_list[U8G_PI_A0_STATE] = 0; /* initial RS state: command mode */ break; case U8G_COM_MSG_STOP: diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp index cab2869ecc..a337668db7 100644 --- a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp @@ -233,7 +233,7 @@ void MarlinUI::init_lcd() { OUT_WRITE(LCD_RESET_PIN, LOW); // perform a clean hardware reset _delay_ms(5); OUT_WRITE(LCD_RESET_PIN, HIGH); - _delay_ms(5); // delay to allow the display to initalize + _delay_ms(5); // delay to allow the display to initialize #endif #if PIN_EXISTS(LCD_RESET)