Browse Source

Merge branch 'FB4S_WIFI' into PR

pull/38/head
X-Dron 4 years ago
committed by GitHub
parent
commit
a550740f06
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 96
      Marlin/Configuration.h
  2. 42
      Marlin/Configuration_adv.h
  3. 25
      Marlin/src/MarlinCore.cpp
  4. 7
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
  5. 15
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h

96
Marlin/Configuration.h

@ -120,14 +120,14 @@
*
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/
#define BAUDRATE 115200
#define BAUDRATE 250000
// Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
#endif
// Name displayed in the LCD "Ready" message and Info menu
@ -415,7 +415,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_0 13
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
@ -425,7 +425,7 @@
#define TEMP_SENSOR_7 0
#define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_PROBE 0
#define TEMP_SENSOR_CHAMBER 0
#define TEMP_SENSOR_CHAMBER 1
// Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25
@ -499,9 +499,10 @@
#define DEFAULT_Ki_LIST { 1.08, 1.0 }
#define DEFAULT_Kd_LIST { 114.00, 112.0 }
#else
#define DEFAULT_Kp 17.04
#define DEFAULT_Ki 1.31
#define DEFAULT_Kd 55.34
// 50Вт
#define DEFAULT_Kp 11.1
#define DEFAULT_Ki 0.55
#define DEFAULT_Kd 56.1
#endif
#endif // PIDTEMP
@ -667,7 +668,7 @@
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
/**
* Stepper Drivers
@ -685,15 +686,15 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/
#define X_DRIVER_TYPE A4988
#define Y_DRIVER_TYPE A4988
#define Z_DRIVER_TYPE A4988
#define X_DRIVER_TYPE TMC2209
#define Y_DRIVER_TYPE TMC2209
#define Z_DRIVER_TYPE TMC2209
//#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988
//#define Z3_DRIVER_TYPE A4988
//#define Z4_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE A4988
#define E0_DRIVER_TYPE TMC2209
//#define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988
@ -748,7 +749,7 @@
* Override with M92
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 421 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160.5, 160.5, 400, 205.0 }
/**
* Default Max Feed Rate (mm/s)
@ -768,7 +769,8 @@
* Override with M201
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 }
#define DEFAULT_MAX_ACCELERATION { 1300, 1300, 100, 800 }
#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@ -784,9 +786,10 @@
* M204 T Travel Acceleration
*/
// @efim-a-efim - decreased E0 acceleration to make it less noisy (yes, even with TMC2208 drivers)
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_ACCELERATION 1200 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves
/**
* Default Jerk limits (mm/s)
@ -798,8 +801,8 @@
*/
#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_XJERK 13.0
#define DEFAULT_YJERK 13.0
#define DEFAULT_ZJERK 0.5
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
@ -849,7 +852,7 @@
* The probe replaces the Z-MIN endstop and is used for Z homing.
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
*/
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Force the use of the probe for Z-axis homing
//#define USE_PROBE_FOR_Z_HOMING
@ -998,10 +1001,11 @@
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 0
#define PROBING_MARGIN 5
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_SPEED (1000)
#define XY_PROBE_SPEED 3000
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@ -1035,16 +1039,17 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/
#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes
#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -3
#define Z_PROBE_OFFSET_RANGE_MAX 3
#define Z_PROBE_OFFSET_RANGE_MIN -5
#define Z_PROBE_OFFSET_RANGE_MAX 5
// Enable the M48 repeatability test to test probe accuracy
//#define Z_MIN_PROBE_REPEATABILITY_TEST
@ -1145,7 +1150,7 @@
#define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
// Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1]
@ -1157,14 +1162,15 @@
// The size of the print bed
#define X_BED_SIZE 250
#define Y_BED_SIZE 210
#define Y_BED_SIZE 206
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
#define Y_MIN_POS 0
#define Y_MIN_POS -2
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE+X_MIN_POS
#define Y_MAX_POS Y_BED_SIZE
#define X_MAX_POS X_BED_SIZE + X_MIN_POS
#define Y_MAX_POS Y_BED_SIZE + Y_MIN_POS
#define Z_MAX_POS 200
/**
@ -1269,8 +1275,8 @@
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
#define MESH_BED_LEVELING
#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
/**
* Normally G28 leaves leveling disabled on completion. Enable
@ -1422,13 +1428,13 @@
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT (0) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT (0) // Y point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#endif
// Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (40*60)
#define HOMING_FEEDRATE_Z (40*60)
#define HOMING_FEEDRATE_XY (60*60)
#define HOMING_FEEDRATE_Z (4*60)
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS
@ -1568,14 +1574,14 @@ EEPROM_W25Q
// @section temperature
// Preheat Constants
#define PREHEAT_1_LABEL "PETG"
#define PREHEAT_1_TEMP_HOTEND 235
#define PREHEAT_1_TEMP_BED 80
#define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 190
#define PREHEAT_1_TEMP_BED 50
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_LABEL "ABS"
#define PREHEAT_2_TEMP_HOTEND 250
#define PREHEAT_2_TEMP_BED 100
#define PREHEAT_2_LABEL "PETG"
#define PREHEAT_2_TEMP_HOTEND 235
#define PREHEAT_2_TEMP_BED 80
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
/**
@ -1775,7 +1781,7 @@ EEPROM_W25Q
*
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/
#define DISPLAY_CHARSET_HD44780 JAPANESE
#define DISPLAY_CHARSET_HD44780 CYRILLIC
/**
* Info Screen Style (0:Classic, 1:Průša)
@ -1824,7 +1830,7 @@ EEPROM_W25Q
// This option overrides the default number of encoder pulses needed to
// produce one step. Should be increased for high-resolution encoders.
//
//#define ENCODER_PULSES_PER_STEP 4
#define ENCODER_PULSES_PER_STEP 4
//
// Use this option to override the number of step signals required to
@ -2286,7 +2292,7 @@ EEPROM_W25Q
* Resolution: TFT_WIDTH and TFT_HEIGHT
* Interface: TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI
*/
#define MKS_ROBIN_TFT35
#define MKS_TS35_V2_0
/**
* TFT UI - User Interface Selection. Enable one of the following options:

42
Marlin/Configuration_adv.h

@ -503,11 +503,11 @@
/**
* M355 Case Light on-off / brightness
*/
//#define CASE_LIGHT_ENABLE
#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN LED_CASE_PIN // Override the default pin if needed
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_ON false // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
#define CASE_LIGHT_MAX_PWM 255 // Limit pwm
#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
@ -1628,7 +1628,7 @@
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
@ -1703,7 +1703,7 @@
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
#define MESH_MIN_X 0
#define MESH_MIN_X MESH_INSET
#define MESH_MIN_Y MESH_INSET
#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
@ -2096,7 +2096,7 @@
// This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 710 // (mm) The length of filament for a complete unload.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading.
@ -2105,7 +2105,7 @@
// 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 710 // (mm) Load length of filament, from extruder gear to nozzle.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 100 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -2268,7 +2268,7 @@
#if AXIS_IS_TMC(X)
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 16 // 0..256
#define X_MICROSTEPS 32 // 0..256
#define X_RSENSE 0.11
#define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
#endif
@ -2284,7 +2284,7 @@
#if AXIS_IS_TMC(Y)
#define Y_CURRENT 800
#define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 16
#define Y_MICROSTEPS 32
#define Y_RSENSE 0.11
#define Y_CHAIN_POS -1
#endif
@ -2330,8 +2330,8 @@
#endif
#if AXIS_IS_TMC(E0)
#define E0_CURRENT 800
#define E0_MICROSTEPS 16
#define E0_CURRENT 650
#define E0_MICROSTEPS 8
#define E0_RSENSE 0.11
#define E0_CHAIN_POS -1
#endif
@ -3236,17 +3236,23 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_2 "Light ON"
#define USER_GCODE_2 "M355 S1"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_3 "Light OFF"
#define USER_GCODE_3 "M355 S0"
#define USER_DESC_4 "Heat Bed/Home/Level"
#define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
// #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
// #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_5 "Power off"
#define USER_GCODE_5 "M81"
// #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
// #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
// #define USER_DESC_4 "Heat Bed/Home/Level"
// #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
#define USER_DESC_4 "Power off"
#define USER_GCODE_4 "M81"
#endif

25
Marlin/src/MarlinCore.cpp

@ -268,6 +268,11 @@ bool wait_for_heatup = true;
* ******************************** FUNCTIONS ********************************
* ***************************************************************************
*/
#ifdef LED_SW_PIN
void setup_LED_SW_pin() {
SET_INPUT_PULLDOWN(LED_SW_PIN);
}
#endif
void setup_killpin() {
#if HAS_KILL
@ -544,7 +549,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
// key kill key press
// -------------------------------------------------------------------------------
static int killCount = 0; // make the inactivity button a bit less responsive
const int KILL_DELAY = 750;
const int KILL_DELAY = 100000;
if (kill_state())
killCount++;
else if (killCount > 0)
@ -559,6 +564,20 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
}
#endif
#ifdef LED_SW_PIN
static int LedSw_Count = 0; // make the inactivity button a bit less responsive
const int LED_SW_DELAY = 1000;
bool led_pin_status = READ(LED_SW_PIN);
if (LedSw_Count == LED_SW_DELAY && !led_pin_status){
caselight.on = !caselight.on;
caselight.update(true);
}
if (led_pin_status && LedSw_Count < LED_SW_DELAY)
LedSw_Count++;
else if (!led_pin_status)
LedSw_Count = 0;
#endif
#if HAS_HOME
// Handle a standalone HOME button
constexpr millis_t HOME_DEBOUNCE_DELAY = 1000UL;
@ -1005,6 +1024,10 @@ void setup() {
#endif
SETUP_RUN(setup_killpin());
#ifdef LED_SW_PIN
SETUP_RUN(setup_LED_SW_pin());
#endif
#if HAS_TMC220x
SETUP_RUN(tmc_serial_begin());

7
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h

@ -168,7 +168,12 @@ BlTouch
//#define POWER_LOSS_PIN PA2 // PW_DET
//#define PS_ON_PIN PB2 // PW_OFF
#define FIL_RUNOUT_PIN PA4
#define FIL_RUNOUT2_PIN PE6
#ifdef CASE_LED_INSTEAD_E1
//#define LED_SW_PIN PE6
#endif
#ifndef LED_SW_PIN
#define FIL_RUNOUT2_PIN PE6
#endif
#endif
//

15
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h

@ -202,6 +202,14 @@ https://easyeda.com/sst78rust/fb4s-led-control
#define FAN_PIN PB1 // FAN
/*
Управление питанием
*/
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_INVERTING false
#define KILL_PIN PA2 // Enable MKSPWC DET PIN
#define KILL_PIN_STATE true // Enable MKSPWC PIN STATE
//
// Thermocouples
//
@ -236,7 +244,12 @@ https://easyeda.com/sst78rust/fb4s-led-control
//#define POWER_LOSS_PIN PA2 // PW_DET
//#define PS_ON_PIN PB2 // PW_OFF
#define FIL_RUNOUT_PIN PA4
#define FIL_RUNOUT2_PIN PE6
#ifdef CASE_LED_INSTEAD_E1
#define LED_SW_PIN PA2//PE6
#endif
#ifndef LED_SW_PIN
#define FIL_RUNOUT2_PIN PE6
#endif
#endif
#define SERVO0_PIN PA8 // Enable BLTOUCH

Loading…
Cancel
Save