Sergey
4 years ago
589 changed files with 6348 additions and 2382 deletions
@ -0,0 +1,202 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) |
|||
|
|||
#include "../../../inc/MarlinConfig.h" |
|||
|
|||
#if ENABLED(TFT_TOUCH_DEVICE_GT911) |
|||
|
|||
#include "gt911.h" |
|||
#include "pinconfig.h" |
|||
|
|||
SW_IIC::SW_IIC(uint16_t sda, uint16_t scl) { |
|||
scl_pin = scl; |
|||
sda_pin = sda; |
|||
} |
|||
|
|||
// Software I2C hardware io init
|
|||
void SW_IIC::init() { |
|||
OUT_WRITE(scl_pin, HIGH); |
|||
OUT_WRITE(sda_pin, HIGH); |
|||
} |
|||
|
|||
// Software I2C start signal
|
|||
void SW_IIC::start() { |
|||
write_sda(HIGH); // SDA = 1
|
|||
write_scl(HIGH); // SCL = 1
|
|||
iic_delay(2); |
|||
write_sda(LOW); // SDA = 0
|
|||
iic_delay(1); |
|||
write_scl(LOW); // SCL = 0 // keep SCL low, avoid false stop caused by level jump caused by SDA switching IN/OUT
|
|||
} |
|||
|
|||
// Software I2C stop signal
|
|||
void SW_IIC::stop() { |
|||
write_scl(LOW); // SCL = 0
|
|||
iic_delay(2); |
|||
write_sda(LOW); // SDA = 0
|
|||
iic_delay(2); |
|||
write_scl(HIGH); // SCL = 1
|
|||
iic_delay(2); |
|||
write_sda(HIGH); // SDA = 1
|
|||
} |
|||
|
|||
// Software I2C sends ACK or NACK signal
|
|||
void SW_IIC::send_ack(bool ack) { |
|||
write_sda(ack ? LOW : HIGH); // SDA = !ack
|
|||
iic_delay(2); |
|||
write_scl(HIGH); // SCL = 1
|
|||
iic_delay(2); |
|||
write_scl(LOW); // SCL = 0
|
|||
} |
|||
|
|||
// Software I2C read ACK or NACK signal
|
|||
bool SW_IIC::read_ack() { |
|||
bool error = 0; |
|||
set_sda_in(); |
|||
|
|||
iic_delay(2); |
|||
|
|||
write_scl(HIGH); // SCL = 1
|
|||
error = read_sda(); |
|||
|
|||
iic_delay(2); |
|||
|
|||
write_scl(LOW); // SCL = 0
|
|||
|
|||
set_sda_out(); |
|||
return error; |
|||
} |
|||
|
|||
void SW_IIC::send_byte(uint8_t txd) { |
|||
LOOP_L_N(i, 8) { |
|||
write_sda(txd & 0x80); // write data bit
|
|||
txd <<= 1; |
|||
iic_delay(1); |
|||
write_scl(HIGH); // SCL = 1
|
|||
iic_delay(2); |
|||
write_scl(LOW); // SCL = 0
|
|||
iic_delay(1); |
|||
} |
|||
|
|||
read_ack(); // wait ack
|
|||
} |
|||
|
|||
uint8_t SW_IIC::read_byte(bool ack) { |
|||
uint8_t data = 0; |
|||
|
|||
set_sda_in(); |
|||
LOOP_L_N(i, 8) { |
|||
write_scl(HIGH); // SCL = 1
|
|||
iic_delay(1); |
|||
data <<= 1; |
|||
if (read_sda()) data++; |
|||
write_scl(LOW); // SCL = 0
|
|||
iic_delay(2); |
|||
} |
|||
set_sda_out(); |
|||
|
|||
send_ack(ack); |
|||
|
|||
return data; |
|||
} |
|||
|
|||
GT911_REG_MAP GT911::reg; |
|||
SW_IIC GT911::sw_iic = SW_IIC(GT911_SW_I2C_SDA_PIN, GT911_SW_I2C_SCL_PIN); |
|||
|
|||
void GT911::write_reg(uint16_t reg, uint8_t reg_len, uint8_t* w_data, uint8_t w_len) { |
|||
sw_iic.start(); |
|||
sw_iic.send_byte(gt911_slave_address); // Set IIC Slave address
|
|||
LOOP_L_N(i, reg_len) { // Set reg address
|
|||
uint8_t r = (reg >> (8 * (reg_len - 1 - i))) & 0xFF; |
|||
sw_iic.send_byte(r); |
|||
} |
|||
|
|||
LOOP_L_N(i, w_len) { // Write data to reg
|
|||
sw_iic.send_byte(w_data[i]); |
|||
} |
|||
sw_iic.stop(); |
|||
} |
|||
|
|||
void GT911::read_reg(uint16_t reg, uint8_t reg_len, uint8_t* r_data, uint8_t r_len) { |
|||
sw_iic.start(); |
|||
sw_iic.send_byte(gt911_slave_address); // Set IIC Slave address
|
|||
LOOP_L_N(i, reg_len) { // Set reg address
|
|||
uint8_t r = (reg >> (8 * (reg_len - 1 - i))) & 0xFF; |
|||
sw_iic.send_byte(r); |
|||
} |
|||
|
|||
sw_iic.start(); |
|||
sw_iic.send_byte(gt911_slave_address + 1); // Set read mode
|
|||
|
|||
LOOP_L_N(i, r_len) { |
|||
r_data[i] = sw_iic.read_byte(1); // Read data from reg
|
|||
} |
|||
sw_iic.stop(); |
|||
} |
|||
|
|||
void GT911::Init() { |
|||
OUT_WRITE(GT911_RST_PIN, LOW); |
|||
OUT_WRITE(GT911_INT_PIN, LOW); |
|||
delay(20); |
|||
WRITE(GT911_RST_PIN, HIGH); |
|||
SET_INPUT(GT911_INT_PIN); |
|||
|
|||
sw_iic.init(); |
|||
|
|||
uint8_t clear_reg = 0x0000; |
|||
write_reg(0x814E, 2, &clear_reg, 2); // Reset to 0 for start
|
|||
} |
|||
|
|||
bool GT911::getFirstTouchPoint(int16_t *x, int16_t *y) { |
|||
read_reg(0x814E, 2, ®.REG.status, 1); |
|||
|
|||
if (reg.REG.status & 0x80) { |
|||
uint8_t clear_reg = 0x00; |
|||
write_reg(0x814E, 2, &clear_reg, 1); // Reset to 0 for start
|
|||
read_reg(0x8150, 2, reg.map + 2, 8 * (reg.REG.status & 0x0F)); |
|||
|
|||
// First touch point
|
|||
*x = ((reg.REG.point[0].xh & 0x0F) << 8) | reg.REG.point[0].xl; |
|||
*y = ((reg.REG.point[0].yh & 0x0F) << 8) | reg.REG.point[0].yl; |
|||
return true; |
|||
} |
|||
return false; |
|||
} |
|||
|
|||
bool GT911::getPoint(int16_t *x, int16_t *y) { |
|||
static bool touched = 0; |
|||
static int16_t read_x = 0, read_y = 0; |
|||
static millis_t next_time = 0; |
|||
|
|||
if (ELAPSED(millis(), next_time)) { |
|||
touched = getFirstTouchPoint(&read_x, &read_y); |
|||
next_time = millis() + 20; |
|||
} |
|||
|
|||
*x = read_x; |
|||
*y = read_y; |
|||
return touched; |
|||
} |
|||
|
|||
#endif // TFT_TOUCH_DEVICE_GT911
|
|||
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
|
|||
@ -0,0 +1,120 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#include "../../../inc/MarlinConfig.h" |
|||
|
|||
#define GT911_SLAVE_ADDRESS 0xBA |
|||
|
|||
#if !PIN_EXISTS(GT911_RST) |
|||
#error "GT911_RST_PIN is not defined." |
|||
#elif !PIN_EXISTS(GT911_INT) |
|||
#error "GT911_INT_PIN is not defined." |
|||
#elif !PIN_EXISTS(GT911_SW_I2C_SCL) |
|||
#error "GT911_SW_I2C_SCL_PIN is not defined." |
|||
#elif !PIN_EXISTS(GT911_SW_I2C_SDA) |
|||
#error "GT911_SW_I2C_SDA_PIN is not defined." |
|||
#endif |
|||
|
|||
class SW_IIC { |
|||
private: |
|||
uint16_t scl_pin; |
|||
uint16_t sda_pin; |
|||
void write_scl(bool level) |
|||
{ |
|||
WRITE(scl_pin, level); |
|||
} |
|||
void write_sda(bool level) |
|||
{ |
|||
WRITE(sda_pin, level); |
|||
} |
|||
bool read_sda() |
|||
{ |
|||
return READ(sda_pin); |
|||
} |
|||
void set_sda_out() |
|||
{ |
|||
SET_OUTPUT(sda_pin); |
|||
} |
|||
void set_sda_in() |
|||
{ |
|||
SET_INPUT_PULLUP(sda_pin); |
|||
} |
|||
static void iic_delay(uint8_t t) |
|||
{ |
|||
delayMicroseconds(t); |
|||
} |
|||
|
|||
public: |
|||
SW_IIC(uint16_t sda, uint16_t scl); |
|||
// setSCL/SDA have to be called before begin()
|
|||
void setSCL(uint16_t scl) |
|||
{ |
|||
scl_pin = scl; |
|||
}; |
|||
void setSDA(uint16_t sda) |
|||
{ |
|||
sda_pin = sda; |
|||
}; |
|||
void init(); // Initialize the IO port of IIC
|
|||
void start(); // Send IIC start signal
|
|||
void stop(); // Send IIC stop signal
|
|||
void send_byte(uint8_t txd); // IIC sends a byte
|
|||
uint8_t read_byte(bool ack); // IIC reads a byte
|
|||
void send_ack(bool ack); // IIC sends ACK or NACK signal
|
|||
bool read_ack(); |
|||
}; |
|||
|
|||
typedef struct __attribute__((__packed__)) { |
|||
uint8_t xl; |
|||
uint8_t xh; |
|||
uint8_t yl; |
|||
uint8_t yh; |
|||
uint8_t sizel; |
|||
uint8_t sizeh; |
|||
uint8_t reserved; |
|||
uint8_t track_id; |
|||
} GT911_POINT; |
|||
|
|||
typedef union __attribute__((__packed__)) { |
|||
uint8_t map[42]; |
|||
struct { |
|||
uint8_t status; // 0x814E
|
|||
uint8_t track_id; // 0x814F
|
|||
|
|||
GT911_POINT point[5]; // [0]:0x8150 - 0x8157 / [1]:0x8158 - 0x815F / [2]:0x8160 - 0x8167 / [3]:0x8168 - 0x816F / [4]:0x8170 - 0x8177
|
|||
} REG; |
|||
} GT911_REG_MAP; |
|||
|
|||
class GT911 { |
|||
private: |
|||
static const uint8_t gt911_slave_address = GT911_SLAVE_ADDRESS; |
|||
static GT911_REG_MAP reg; |
|||
static SW_IIC sw_iic; |
|||
static void write_reg(uint16_t reg, uint8_t reg_len, uint8_t* w_data, uint8_t w_len); |
|||
static void read_reg(uint16_t reg, uint8_t reg_len, uint8_t* r_data, uint8_t r_len); |
|||
|
|||
public: |
|||
static void Init(); |
|||
static bool getFirstTouchPoint(int16_t *x, int16_t *y); |
|||
static bool getPoint(int16_t *x, int16_t *y); |
|||
}; |
|||
@ -0,0 +1,40 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
#include "../../inc/MarlinConfigPre.h" |
|||
|
|||
#if ENABLED(AUTO_REPORT_POSITION) |
|||
|
|||
#include "../gcode.h" |
|||
#include "../../module/motion.h" |
|||
|
|||
/**
|
|||
* M154: Set position auto-report interval. M154 S<seconds> |
|||
*/ |
|||
void GcodeSuite::M154() { |
|||
|
|||
if (parser.seenval('S')) |
|||
position_auto_reporter.set_interval(parser.value_byte()); |
|||
|
|||
} |
|||
|
|||
#endif // AUTO_REPORT_POSITION
|
|||
Some files were not shown because too many files changed in this diff
Loading…
Reference in new issue