✨ Robin Nano v1 CDC (USB mod) (#24619)

Marlin/src/pins/pins.h

@@ -512,9 +512,9 @@
 #elif MB(MKS_ROBIN_MINI)
   #include "stm32f1/pins_MKS_ROBIN_MINI.h"      // STM32F1                                env:mks_robin_mini env:mks_robin_mini_maple
 #elif MB(MKS_ROBIN_NANO)
-  #include "stm32f1/pins_MKS_ROBIN_NANO.h"      // STM32F1                                env:mks_robin_nano35 env:mks_robin_nano35_maple
+  #include "stm32f1/pins_MKS_ROBIN_NANO.h"      // STM32F1                                env:mks_robin_nano_v1v2 env:mks_robin_nano_v1v2_maple env:mks_robin_nano_v1_2_usbmod
 #elif MB(MKS_ROBIN_NANO_V2)
-  #include "stm32f1/pins_MKS_ROBIN_NANO_V2.h"   // STM32F1                                env:mks_robin_nano35 env:mks_robin_nano35_maple
+  #include "stm32f1/pins_MKS_ROBIN_NANO_V2.h"   // STM32F1                                env:mks_robin_nano_v1v2 env:mks_robin_nano3_v1v2_maple
 #elif MB(MKS_ROBIN_LITE)
   #include "stm32f1/pins_MKS_ROBIN_LITE.h"      // STM32F1                                env:mks_robin_lite env:mks_robin_lite_maple
 #elif MB(MKS_ROBIN_LITE3)
@@ -694,7 +694,7 @@
 #elif MB(OPULO_LUMEN_REV3)
   #include "stm32f4/pins_OPULO_LUMEN_REV3.h"    // STM32F4                                env:Opulo_Lumen_REV3
 #elif MB(MKS_ROBIN_NANO_V1_3_F4)
-  #include "stm32f4/pins_MKS_ROBIN_NANO_V1_3_F4.h" // STM32F4                             env:mks_robin_nano_v1_3_f4
+  #include "stm32f4/pins_MKS_ROBIN_NANO_V1_3_F4.h" // STM32F4                             env:mks_robin_nano_v1_3_f4 env:mks_robin_nano_v1_3_f4_usbmod
 #elif MB(MKS_EAGLE)
   #include "stm32f4/pins_MKS_EAGLE.h"           // STM32F4                                env:mks_eagle
 #elif MB(ARTILLERY_RUBY)

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h

@@ -35,7 +35,9 @@
 
 #define BOARD_INFO_NAME "MKS Robin nano V2.0"
 
-#define BOARD_NO_NATIVE_USB
+#ifndef USB_MOD
+  #define BOARD_NO_NATIVE_USB
+#endif
 #define USES_DIAG_PINS
 
 // Avoid conflict with TIMER_SERVO when using the STM32 HAL

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_common.h

@@ -29,7 +29,9 @@
   #error "MKS Robin nano boards support up to 2 hotends / E steppers."
 #endif
 
-#define BOARD_NO_NATIVE_USB
+#ifndef USB_MOD
+  #define BOARD_NO_NATIVE_USB
+#endif
 
 // Avoid conflict with TIMER_SERVO when using the STM32 HAL
 #define TEMP_TIMER  5
@@ -58,9 +60,14 @@
 // Limit Switches
 //
 #define X_STOP_PIN                          PA15
-#define Y_STOP_PIN                          PA12
-#define Z_MIN_PIN                           PA11
 #define Z_MAX_PIN                           PC4
+#ifndef USB_MOD
+  #define Y_STOP_PIN                        PA12
+  #define Z_MIN_PIN                         PA11
+#else
+  #define Y_STOP_PIN                        PB10
+  #define Z_MIN_PIN                         PB11
+#endif
 
 //
 // Steppers

buildroot/share/PlatformIO/scripts/offset_and_rename.py

@@ -53,8 +53,13 @@ if pioutil.is_pio_build():
     #
     if 'rename' in board_keys:
 
+        # If FIRMWARE_BIN is defined by config, override all
+        mf = env["MARLIN_FEATURES"]
+        if "FIRMWARE_BIN" in mf: new_name = mf["FIRMWARE_BIN"]
+        else: new_name = board.get("build.rename")
+
         def rename_target(source, target, env):
             from pathlib import Path
-            Path(target[0].path).replace(Path(target[0].dir.path, board.get("build.rename")))
+            Path(target[0].path).replace(Path(target[0].dir.path, new_name))
 
         marlin.add_post_action(rename_target)

buildroot/tests/mks_robin_nano_v1_2_usbmod

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano
+# (STM32F1 genericSTM32F103VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS/ZNP Robin nano v1.2 Emulated DOGM FSMC and native USB mod
+#
+use_example_configs Mks/Robin
+opt_add USB_MOD
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO SERIAL_PORT -1
+exec_test $1 $2 "MKS/ZNP Robin nano v1.2 Emulated DOGM FSMC and native USB mod" "$3"
+
+# cleanup
+restore_configs

buildroot/tests/mks_robin_nano_v1_3_f4_usbmod

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+#
+# Build tests for MKS Robin nano
+# (STM32F4 genericSTM32F407VE)
+#
+
+# exit on first failure
+set -e
+
+#
+# MKS/ZNP Robin nano v1.3 Emulated DOGM FSMC and native USB mod
+#
+use_example_configs Mks/Robin
+opt_add USB_MOD
+opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V1_3_F4 SERIAL_PORT -1
+exec_test $1 $2 "MKS/ZNP Robin nano v1.3 Emulated DOGM FSMC and native USB mod" "$3"
+
+# cleanup
+restore_configs

ini/renamed.ini

@@ -56,3 +56,11 @@ extends = renamed
 [env:STM32F103VE_GTM32]
 # Renamed to STM32F103VE_GTM32_maple
 extends = renamed
+
+[env:mks_robin_nano_35]
+# Renamed to mks_robin_nano_v1v2
+extends = renamed
+
+[env:mks_robin_nano_35_maple]
+# Renamed to mks_robin_nano_v1v2_maple
+extends = renamed

ini/stm32f1-maple.ini

@@ -203,17 +203,15 @@ board_build.ldscript = mks_robin_mini.ld
 build_flags          = ${STM32F1_maple.build_flags} -DMCU_STM32F103VE
 
 #
-# MKS Robin Nano (STM32F103VET6)
+# MKS Robin Nano v1.x and v2 (STM32F103VET6)
 #
-[env:mks_robin_nano35_maple]
+[env:mks_robin_nano_v1v2_maple]
 extends              = STM32F1_maple
 board                = genericSTM32F103VE
 board_build.address  = 0x08007000
 board_build.rename   = Robin_nano35.bin
 board_build.ldscript = mks_robin_nano.ld
 build_flags          = ${STM32F1_maple.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4
-debug_tool           = jlink
-upload_protocol      = jlink
 
 #
 # MKS Robin (STM32F103ZET6)

ini/stm32f1.ini

@@ -216,23 +216,35 @@ build_flags                 = ${stm32_variant.build_flags}
 build_unflags               = ${stm32_variant.build_unflags}
                               -DUSBCON -DUSBD_USE_CDC
 
-#
+[mks_robin_nano_v1v2_common]
-# MKS Robin Nano V1.2 and V2
-#
-[env:mks_robin_nano35]
 extends                     = stm32_variant
 board                       = genericSTM32F103VE
 board_build.variant         = MARLIN_F103Vx
 board_build.encrypt_mks     = Robin_nano35.bin
 board_build.offset          = 0x7000
 board_upload.offset_address = 0x08007000
+debug_tool                  = stlink
+upload_protocol             = stlink
+
+#
+# MKS Robin Nano V1.2 and V2
+#
+[env:mks_robin_nano_v1v2]
+extends                     = mks_robin_nano_v1v2_common
 build_flags                 = ${stm32_variant.build_flags}
                               -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
                               -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
 build_unflags               = ${stm32_variant.build_unflags}
                               -DUSBCON -DUSBD_USE_CDC
-debug_tool                  = jlink
+
-upload_protocol             = jlink
+#
+# MKS/ZNP Robin Nano v1.2 with native USB modification
+#
+[env:mks_robin_nano_v1_2_usbmod]
+extends                     = mks_robin_nano_v1v2_common
+build_flags                 = ${common_stm32.build_flags}
+                              -DMCU_STM32F103VE -DSS_TIMER=4
+                              -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
 
 #
 # Mingda MPX_ARM_MINI

ini/stm32f4.ini

@@ -570,42 +570,54 @@ board_upload.offset_address = 0x0800C000
 extra_scripts               = ${stm32_variant.extra_scripts}
                               buildroot/share/PlatformIO/scripts/openblt.py
 
-#
+[mks_robin_nano_v1_3_f4_common]
-# BOARD_MKS_ROBIN_NANO_V1_3_F4
-#  - MKS Robin Nano   V1.3 (STM32F407VET6) 5 Pololu Plug
-#  - MKS Robin Nano-S V1.3 (STM32F407VET6) 4 TMC2225 + 1 Pololu Plug
-#
-[env:mks_robin_nano_v1_3_f4]
 extends                     = stm32_variant
 board                       = marlin_STM32F407VGT6_CCM
 board_build.variant         = MARLIN_F4x7Vx
 board_build.offset          = 0x8000
 board_upload.offset_address = 0x08008000
 board_build.rename          = Robin_nano35.bin
-build_flags                 = ${stm32_variant.build_flags}
-                              -DMCU_STM32F407VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
-                              -DSTM32_FLASH_SIZE=512
-                              -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
-                              -DHAL_SD_MODULE_ENABLED
-                              -DHAL_SRAM_MODULE_ENABLED
-build_unflags               = ${stm32_variant.build_unflags}
-                              -DUSBCON -DUSBD_USE_CDC
 debug_tool                  = jlink
 upload_protocol             = jlink
 
+#
+# BOARD_MKS_ROBIN_NANO_V1_3_F4
+#  - MKS Robin Nano   V1.3 (STM32F407VET6, 5 Pololu Plug)
+#  - MKS Robin Nano-S V1.3 (STM32F407VET6, 4 TMC2225, 1 Pololu Plug)
+#  - ZNP Robin Nano   V1.3 (STM32F407VET6, 2 TMC2208, 2 A4988, 1x Polulu plug)
+#
+[env:mks_robin_nano_v1_3_f4]
+extends       = mks_robin_nano_v1_3_f4_common
+build_flags   = ${stm32_variant.build_flags}
+                -DMCU_STM32F407VE -DENABLE_HWSERIAL3 -DSTM32_FLASH_SIZE=512
+                -DTIMER_SERVO=TIM2 -DTIMER_TONE=TIM3 -DSS_TIMER=4
+                -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED
+build_unflags = ${stm32_variant.build_unflags}
+                -DUSBCON -DUSBD_USE_CDC
+
+#
+#  MKS/ZNP Robin Nano V1.3 with native USB mod
+#
+[env:mks_robin_nano_v1_3_f4_usbmod]
+extends       = mks_robin_nano_v1_3_f4_common
+build_flags   = ${stm32_variant.build_flags}
+                -DMCU_STM32F407VE -DSTM32_FLASH_SIZE=512
+                -DTIMER_SERVO=TIM2 -DTIMER_TONE=TIM3 -DSS_TIMER=4
+                -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED
+
 #
 # Artillery Ruby
 #
 [env:Artillery_Ruby]
-extends           = common_stm32
+extends       = common_stm32
-board             = marlin_Artillery_Ruby
+board         = marlin_Artillery_Ruby
-build_flags       = ${common_stm32.build_flags}
+build_flags   = ${common_stm32.build_flags}
-                    -DSTM32F401xC -DTARGET_STM32F4 -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32
+                -DSTM32F401xC -DTARGET_STM32F4 -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32
-                    -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
+                -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
-                    -DUSB_PRODUCT=\"Artillery_3D_Printer\"
+                -DUSB_PRODUCT=\"Artillery_3D_Printer\"
-                    -DFLASH_DATA_SECTOR=1U -DFLASH_BASE_ADDRESS=0x08004000
+                -DFLASH_DATA_SECTOR=1U -DFLASH_BASE_ADDRESS=0x08004000
-extra_scripts     = ${common_stm32.extra_scripts}
+extra_scripts = ${common_stm32.extra_scripts}
-                    pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+                pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
 
 #
 # Ender-3 S1 STM32F401RC_creality