diff --git a/Marlin/pins.h b/Marlin/pins.h index ce15248158..0ed6e55c0f 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -957,198 +957,68 @@ #endif /**************************************************************************************** -* Teensylu 0.7 pin assingments (ATMEGA90USB) -* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! -****************************************************************************************/ -#if MOTHERBOARD == 8 -#define MOTHERBOARD 8 -#define KNOWN_BOARD 1 - - -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 13 -#define X_MAX_PIN -1 - -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 15 -#define Z_MAX_PIN -1 - -#define E0_STEP_PIN 6 -#define E0_DIR_PIN 7 -#define E0_ENABLE_PIN 19 - - - -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define HEATER_BED_PIN 20 // Bed -#define FAN_PIN 22 // Fan - -#define TEMP_0_PIN 7 // Extruder -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define TEMP_BED_PIN 6 // Bed - -#define SDPOWER -1 -#define SDSS 8 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define ALARM_PIN -1 - -#ifndef SDSUPPORT -// these pins are defined in the SD library if building with SD support - #define SCK_PIN 9 - #define MISO_PIN 11 - #define MOSI_PIN 10 -#endif -#endif - -/**************************************************************************************** -* Printrboard Rev. B pin assingments (ATMEGA90USB1286) -* Requires the Teensyduino software with Teensy++ 2.0 selected in arduino IDE! +* Teensylu 0.7 / Printrboard pin assignments (AT90USB1286) +* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! http://www.pjrc.com/teensy/teensyduino.html * See http://reprap.org/wiki/Printrboard for more info ****************************************************************************************/ -#if MOTHERBOARD == 81 +#if MOTHERBOARD == 8 || MOTHERBOARD == 81 #undef MOTHERBOARD -#define MOTHERBOARD 8 // Disable MarlinSerial etc. +#define MOTHERBOARD 8 #define KNOWN_BOARD 1 #ifndef __AVR_AT90USB1286__ #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. #endif -#define X_STEP_PIN 28 -#define X_DIR_PIN 29 -#define X_ENABLE_PIN 19 -#define X_MIN_PIN 47 +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 39 +#define X_MIN_PIN 13 #define X_MAX_PIN -1 -#define Y_STEP_PIN 30 -#define Y_DIR_PIN 31 -#define Y_ENABLE_PIN 18 -#define Y_MIN_PIN 20 +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 38 +#define Y_MIN_PIN 14 #define Y_MAX_PIN -1 -#define Z_STEP_PIN 32 -#define Z_DIR_PIN 33 -#define Z_ENABLE_PIN 17 -#define Z_MIN_PIN 36 +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 23 +#define Z_MIN_PIN 15 #define Z_MAX_PIN -1 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 35 -#define E0_ENABLE_PIN 13 +#define E0_STEP_PIN 6 +#define E0_DIR_PIN 7 +#define E0_ENABLE_PIN 19 -#define HEATER_0_PIN 15 // Extruder +#define HEATER_0_PIN 21 // Extruder #define HEATER_1_PIN -1 #define HEATER_2_PIN -1 -#define HEATER_BED_PIN 14 // Bed -#define FAN_PIN 16 // Fan +#define HEATER_BED_PIN 20 // Bed +#define FAN_PIN 22 -#define TEMP_0_PIN 1 // Extruder - ANALOG PIN NUMBERING +#define TEMP_0_PIN 7 // Extruder / Analog PIN numbering #define TEMP_1_PIN -1 #define TEMP_2_PIN -1 -#define TEMP_BED_PIN 0 // Bed - ANALOG PIN NUMBERING +#define TEMP_BED_PIN 6 // Bed / Analog PIN numbering #define SDPOWER -1 -#define SDSS 26 +#define SDSS 8 #define LED_PIN -1 #define PS_ON_PIN -1 #define KILL_PIN -1 +#define ALARM_PIN -1 #ifndef SDSUPPORT // these pins are defined in the SD library if building with SD support - #define SCK_PIN 21 - #define MISO_PIN 22 - #define MOSI_PIN 23 + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 #endif -#ifdef ULTRA_LCD - - #ifdef NEWPANEL - //arduino pin which triggers an piezzo beeper - #define BEEPER 33 // Beeper on AUX-4 - -#ifndef MCP28017_LCD - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 -#endif // MCP28017_LCD - - //buttons are directly attached using AUX-2 - #define BTN_EN1 11 // PC1 - #define BTN_EN2 12 // PC2 -#ifndef VERSAPANEL - #define BTN_ENC 31 //the click -#endif - - #define BLEN_C 2 - #define BLEN_B 1 - #define BLEN_A 0 - - #define SDCARDDETECT -1 // Ramps does not use this port - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - - #else //old style panel with shift register - //arduino pin witch triggers an piezzo beeper - #define BEEPER 33 No Beeper added - - //buttons are attached to a shift register - // Not wired this yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 - - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - - //bits in the shift register that carry the buttons for: - // left up center down right red - #define BL_LE 7 - #define BL_UP 6 - #define BL_MI 5 - #define BL_DW 4 - #define BL_RI 3 - #define BL_ST 2 - - #define BLEN_B 1 - #define BLEN_A 0 - #endif -#endif //ULTRA_LCD - -#endif +#endif // MOTHERBOARD == 8 (Teensylu) or 81 (Printrboard) /**************************************************************************************** * Brainwave 1.0 pin assignments (AT90USB646) @@ -1185,10 +1055,10 @@ #define Z_MAX_PIN -1 #define Z_ATT_PIN 16 -#define E0_STEP_PIN 21 -#define E0_DIR_PIN 23 -#define E0_ENABLE_PIN 22 -#define E0_ATT_PIN 20 +#define E0_STEP_PIN 21 +#define E0_DIR_PIN 23 +#define E0_ENABLE_PIN 22 +#define E0_ATT_PIN 20 #define HEATER_0_PIN 4 // Extruder #define HEATER_1_PIN -1 @@ -1210,12 +1080,12 @@ #ifndef SDSUPPORT // these pins are defined in the SD library if building with SD support - #define SCK_PIN 21 - #define MISO_PIN 22 - #define MOSI_PIN 23 + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 #endif -#endif +#endif // MOTHERBOARD == 82 (Brainwave) /**************************************************************************************** * Gen3+ pin assignment