Browse Source

Macrofy attachInterrupt

pull/1/head
Scott Lahteine 5 years ago
parent
commit
a06010e08a
  1. 69
      Marlin/src/HAL/HAL_AVR/endstop_interrupts.h
  2. 23
      Marlin/src/HAL/HAL_DUE/endstop_interrupts.h
  3. 23
      Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h
  4. 45
      Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h
  5. 30
      Marlin/src/HAL/HAL_TEENSY31_32/endstop_interrupts.h
  6. 25
      Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h

69
Marlin/src/HAL/HAL_AVR/endstop_interrupts.h

@ -102,153 +102,124 @@ void pciSetup(const int8_t pin) {
ISR(PCINT3_vect, ISR_ALIASOF(PCINT0_vect)); ISR(PCINT3_vect, ISR_ALIASOF(PCINT0_vect));
#endif #endif
void setup_endstop_interrupts( void ) { void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX #if HAS_X_MAX
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it _ATTACH(X_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! static_assert(digitalPinToPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
static_assert(digitalPinToPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error pciSetup(X_MAX_PIN);
pciSetup(X_MAX_PIN); // assign it
#endif #endif
#endif #endif
#if HAS_X_MIN #if HAS_X_MIN
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
pciSetup(X_MIN_PIN); pciSetup(X_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
pciSetup(Y_MAX_PIN); pciSetup(Y_MAX_PIN);
#endif #endif
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
pciSetup(Y_MIN_PIN); pciSetup(Y_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
pciSetup(Z_MAX_PIN); pciSetup(Z_MAX_PIN);
#endif #endif
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
pciSetup(Z_MIN_PIN); pciSetup(Z_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_X2_MAX #if HAS_X2_MAX
#if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(X2_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
pciSetup(X2_MAX_PIN); pciSetup(X2_MAX_PIN);
#endif #endif
#endif #endif
#if HAS_X2_MIN #if HAS_X2_MIN
#if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X2_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
pciSetup(X2_MIN_PIN); pciSetup(X2_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_Y2_MAX #if HAS_Y2_MAX
#if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y2_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
pciSetup(Y2_MAX_PIN); pciSetup(Y2_MAX_PIN);
#endif #endif
#endif #endif
#if HAS_Y2_MIN #if HAS_Y2_MIN
#if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y2_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
pciSetup(Y2_MIN_PIN); pciSetup(Y2_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
pciSetup(Z2_MAX_PIN); pciSetup(Z2_MAX_PIN);
#endif #endif
#endif #endif
#if HAS_Z2_MIN #if HAS_Z2_MIN
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
pciSetup(Z2_MIN_PIN); pciSetup(Z2_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_Z3_MAX #if HAS_Z3_MAX
#if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MAX_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
pciSetup(Z3_MAX_PIN); pciSetup(Z3_MAX_PIN);
#endif #endif
#endif #endif
#if HAS_Z3_MIN #if HAS_Z3_MIN
#if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MIN_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
pciSetup(Z3_MIN_PIN); pciSetup(Z3_MIN_PIN);
#endif #endif
#endif #endif
#if HAS_Z_MIN_PROBE_PIN #if HAS_Z_MIN_PROBE_PIN
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT) #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PROBE_PIN);
#else #else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable"); static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
pciSetup(Z_MIN_PROBE_PIN); pciSetup(Z_MIN_PROBE_PIN);
#endif #endif

23
Marlin/src/HAL/HAL_DUE/endstop_interrupts.h

@ -46,37 +46,38 @@ void endstop_ISR(void) { endstops.update(); }
*/ */
void setup_endstop_interrupts(void) { void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX #if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it _ATTACH(X_MAX_PIN);
#endif #endif
#if HAS_X_MIN #if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X_MIN_PIN);
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MAX_PIN);
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MIN_PIN);
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MAX_PIN);
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PIN);
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MAX_PIN);
#endif #endif
#if HAS_Z2_MIN #if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MIN_PIN);
#endif #endif
#if HAS_Z3_MAX #if HAS_Z3_MAX
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MAX_PIN);
#endif #endif
#if HAS_Z3_MIN #if HAS_Z3_MIN
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MIN_PIN);
#endif #endif
#if HAS_Z_MIN_PROBE_PIN #if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PROBE_PIN);
#endif #endif
} }

23
Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h

@ -41,37 +41,38 @@
void ICACHE_RAM_ATTR endstop_ISR(void) { endstops.update(); } void ICACHE_RAM_ATTR endstop_ISR(void) { endstops.update(); }
void setup_endstop_interrupts(void) { void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX #if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(X_MAX_PIN);
#endif #endif
#if HAS_X_MIN #if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X_MIN_PIN);
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MAX_PIN);
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MIN_PIN);
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MAX_PIN);
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PIN);
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MAX_PIN);
#endif #endif
#if HAS_Z2_MIN #if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MIN_PIN);
#endif #endif
#if HAS_Z3_MAX #if HAS_Z3_MAX
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MAX_PIN);
#endif #endif
#if HAS_Z3_MIN #if HAS_Z3_MIN
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MIN_PIN);
#endif #endif
#if HAS_Z_MIN_PROBE_PIN #if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PROBE_PIN);
#endif #endif
} }

45
Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h

@ -41,70 +41,71 @@
void endstop_ISR(void) { endstops.update(); } void endstop_ISR(void) { endstops.update(); }
void setup_endstop_interrupts(void) { void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX #if HAS_X_MAX
#if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN) #if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN)
#error "X_MAX_PIN is not an INTERRUPT capable pin." #error "X_MAX_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(X_MAX_PIN);
#endif #endif
#if HAS_X_MIN #if HAS_X_MIN
#if !LPC1768_PIN_INTERRUPT_M(X_MIN_PIN) #if !LPC1768_PIN_INTERRUPT_M(X_MIN_PIN)
#error "X_MIN_PIN is not an INTERRUPT capable pin." #error "X_MIN_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X_MIN_PIN);
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
#if !LPC1768_PIN_INTERRUPT_M(Y_MAX_PIN) #if !LPC1768_PIN_INTERRUPT_M(Y_MAX_PIN)
#error "Y_MAX_PIN is not an INTERRUPT capable pin." #error "Y_MAX_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MAX_PIN);
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
#if !LPC1768_PIN_INTERRUPT_M(Y_MIN_PIN) #if !LPC1768_PIN_INTERRUPT_M(Y_MIN_PIN)
#error "Y_MIN_PIN is not an INTERRUPT capable pin." #error "Y_MIN_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MIN_PIN);
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z_MAX_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z_MAX_PIN)
#error "Z_MAX_PIN is not an INTERRUPT capable pin." #error "Z_MAX_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MAX_PIN);
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
#if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN)
#error "Z_MIN_PIN is not an INTERRUPT capable pin." #error "Z_MIN_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PIN);
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN)
#error "Z2_MAX_PIN is not an INTERRUPT capable pin." #error "Z2_MAX_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MAX_PIN);
#endif #endif
#if HAS_Z2_MIN #if HAS_Z2_MIN
#if !LPC1768_PIN_INTERRUPT_M(Z2_MIN_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z2_MIN_PIN)
#error "Z2_MIN_PIN is not an INTERRUPT capable pin." #error "Z2_MIN_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MIN_PIN);
#endif #endif
#if HAS_Z3_MAX #if HAS_Z3_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
#error "Z3_MIN_PIN is not an INTERRUPT capable pin." #error "Z3_MIN_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MAX_PIN);
#endif #endif
#if HAS_Z3_MIN #if HAS_Z3_MIN
#if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
#error "Z3_MIN_PIN is not an INTERRUPT capable pin." #error "Z3_MIN_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MIN_PIN);
#endif #endif
#if HAS_Z_MIN_PROBE_PIN #if HAS_Z_MIN_PROBE_PIN
#if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PROBE_PIN) #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PROBE_PIN)
#error "Z_MIN_PROBE_PIN is not an INTERRUPT capable pin." #error "Z_MIN_PROBE_PIN is not INTERRUPT-capable."
#endif #endif
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PROBE_PIN);
#endif #endif
} }

30
Marlin/src/HAL/HAL_TEENSY31_32/endstop_interrupts.h

@ -45,41 +45,33 @@ void endstop_ISR(void) { endstops.update(); }
* On Due, all pins support external interrupt capability. * On Due, all pins support external interrupt capability.
*/ */
void setup_endstop_interrupts( void ) { void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX #if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it _ATTACH(X_MAX_PIN);
#endif #endif
#if HAS_X_MIN #if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X_MIN_PIN);
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MAX_PIN);
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MIN_PIN);
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MAX_PIN);
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PIN);
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MAX_PIN);
#endif #endif
#if HAS_Z2_MIN #if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MIN_PIN);
#endif #endif
#if HAS_Z_MIN_PROBE_PIN #if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PROBE_PIN);
#endif #endif
} }

25
Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h

@ -44,38 +44,39 @@ void endstop_ISR(void) { endstops.update(); }
* Endstop interrupts for Due based targets. * Endstop interrupts for Due based targets.
* On Due, all pins support external interrupt capability. * On Due, all pins support external interrupt capability.
*/ */
void setup_endstop_interrupts( void ) { void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX #if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it _ATTACH(X_MAX_PIN);
#endif #endif
#if HAS_X_MIN #if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(X_MIN_PIN);
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MAX_PIN);
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Y_MIN_PIN);
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MAX_PIN);
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PIN);
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MAX_PIN);
#endif #endif
#if HAS_Z2_MIN #if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z2_MIN_PIN);
#endif #endif
#if HAS_Z3_MAX #if HAS_Z3_MAX
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MAX_PIN);
#endif #endif
#if HAS_Z3_MIN #if HAS_Z3_MIN
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE); _ATTACH(Z3_MIN_PIN);
#endif #endif
#if HAS_Z_MIN_PROBE_PIN #if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); _ATTACH(Z_MIN_PROBE_PIN);
#endif #endif
} }

Loading…
Cancel
Save