Browse Source
* fix pinsDebug for F1 boards * add MKS Robin PRO V2 board - development board * tft spi working with F4 boards * pins formating * sanity check for TFT on supported cores in STM32 * Fix tabs/spaces in pins file Co-authored-by: Jason Smith <jason.inet@gmail.com>vanilla_fb_2.0.x
Victor Oliveira
4 years ago
committed by
GitHub
GitHub
7 changed files with 540 additions and 119 deletions
@ -0,0 +1,381 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#if NOT_TARGET(STM32F4, STM32F4xx) |
|||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" |
|||
#elif HOTENDS > 2 || E_STEPPERS > 2 |
|||
#error "MKS Robin Nano V3 supports up to 1 hotends / E-steppers." |
|||
#endif |
|||
|
|||
#define BOARD_INFO_NAME "MKS Robin PRO V2" |
|||
|
|||
// Use one of these or SDCard-based Emulation will be used
|
|||
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
|
|||
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
|
|||
#define I2C_EEPROM |
|||
|
|||
//
|
|||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
|||
//
|
|||
|
|||
//
|
|||
// Note: MKS Robin board is using SPI2 interface.
|
|||
//
|
|||
//#define SPI_MODULE 2
|
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_DIAG_PIN PA15 |
|||
#define Y_DIAG_PIN PA12 |
|||
#define Z_DIAG_PIN PA11 |
|||
#define E0_DIAG_PIN PC4 |
|||
#define E1_DIAG_PIN PE7 |
|||
|
|||
//
|
|||
|
|||
#define X_STOP_PIN PA15 |
|||
#define Y_STOP_PIN PA12 |
|||
#define Z_MIN_PIN PA11 |
|||
#define Z_MAX_PIN PC4 |
|||
|
|||
#ifndef FIL_RUNOUT_PIN |
|||
#define FIL_RUNOUT_PIN PA4 // MT_DET
|
|||
#endif |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_ENABLE_PIN PE4 |
|||
#define X_STEP_PIN PE3 |
|||
#define X_DIR_PIN PE2 |
|||
#ifndef X_CS_PIN |
|||
#define X_CS_PIN PD5 |
|||
#endif |
|||
|
|||
#define Y_ENABLE_PIN PE1 |
|||
#define Y_STEP_PIN PE0 |
|||
#define Y_DIR_PIN PB9 |
|||
#ifndef Y_CS_PIN |
|||
#define Y_CS_PIN PD7 |
|||
#endif |
|||
|
|||
#define Z_ENABLE_PIN PB8 |
|||
#define Z_STEP_PIN PB5 |
|||
#define Z_DIR_PIN PB4 |
|||
#ifndef Z_CS_PIN |
|||
#define Z_CS_PIN PD4 |
|||
#endif |
|||
|
|||
#define E0_ENABLE_PIN PB3 |
|||
#define E0_STEP_PIN PD6 |
|||
#define E0_DIR_PIN PD3 |
|||
#ifndef E0_CS_PIN |
|||
#define E0_CS_PIN PD9 |
|||
#endif |
|||
|
|||
#define E1_ENABLE_PIN PA3 |
|||
#define E1_STEP_PIN PD15 |
|||
#define E1_DIR_PIN PA1 |
|||
#ifndef E1_CS_PIN |
|||
#define E1_CS_PIN PD8 |
|||
#endif |
|||
|
|||
//
|
|||
// Software SPI pins for TMC2130 stepper drivers
|
|||
//
|
|||
#if ENABLED(TMC_USE_SW_SPI) |
|||
#ifndef TMC_SW_MOSI |
|||
#define TMC_SW_MOSI PD14 |
|||
#endif |
|||
#ifndef TMC_SW_MISO |
|||
#define TMC_SW_MISO PD1 |
|||
#endif |
|||
#ifndef TMC_SW_SCK |
|||
#define TMC_SW_SCK PD0 |
|||
#endif |
|||
#endif |
|||
|
|||
#if HAS_TMC_UART |
|||
/**
|
|||
* TMC2208/TMC2209 stepper drivers |
|||
* |
|||
* Hardware serial communication ports. |
|||
* If undefined software serial is used according to the pins below |
|||
*/ |
|||
//#define X_HARDWARE_SERIAL Serial1
|
|||
//#define X2_HARDWARE_SERIAL Serial1
|
|||
//#define Y_HARDWARE_SERIAL Serial1
|
|||
//#define Y2_HARDWARE_SERIAL Serial1
|
|||
//#define Z_HARDWARE_SERIAL Serial1
|
|||
//#define Z2_HARDWARE_SERIAL Serial1
|
|||
//#define E0_HARDWARE_SERIAL Serial1
|
|||
//#define E1_HARDWARE_SERIAL Serial1
|
|||
//#define E2_HARDWARE_SERIAL Serial1
|
|||
//#define E3_HARDWARE_SERIAL Serial1
|
|||
//#define E4_HARDWARE_SERIAL Serial1
|
|||
|
|||
//
|
|||
// Software serial
|
|||
//
|
|||
|
|||
#define X_SERIAL_TX_PIN PD5 |
|||
#define X_SERIAL_RX_PIN PD5 |
|||
|
|||
#define Y_SERIAL_TX_PIN PD7 |
|||
#define Y_SERIAL_RX_PIN PD7 |
|||
|
|||
#define Z_SERIAL_TX_PIN PD4 |
|||
#define Z_SERIAL_RX_PIN PD4 |
|||
|
|||
#define E0_SERIAL_TX_PIN PD9 |
|||
#define E0_SERIAL_RX_PIN PD9 |
|||
|
|||
#define E1_SERIAL_TX_PIN PD8 |
|||
#define E1_SERIAL_RX_PIN PD8 |
|||
|
|||
// Reduce baud rate to improve software serial reliability
|
|||
#define TMC_BAUD_RATE 19200 |
|||
#endif // TMC2208 || TMC2209
|
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN PC1 // TH1
|
|||
#define TEMP_1_PIN PC2 // TH2
|
|||
#define TEMP_BED_PIN PC0 // TB1
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PC3 // HEATER1
|
|||
#define HEATER_1_PIN PB0 // HEATER2
|
|||
#define HEATER_BED_PIN PA0 // HOT BED
|
|||
|
|||
#define FAN_PIN PB1 // FAN
|
|||
|
|||
//
|
|||
// Thermocouples
|
|||
//
|
|||
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
|||
//#define MAX6675_SS_PIN PE6 // TC2 - CS2
|
|||
|
|||
//
|
|||
// Misc. Functions
|
|||
//
|
|||
// #define POWER_LOSS_PIN PA2 // PW_DET
|
|||
// #define PS_ON_PIN PA3 // PW_OFF
|
|||
// #define SUICIDE_PIN PB2 // Enable MKSPWC support
|
|||
// #define KILL_PIN PA2 // Enable MKSPWC support
|
|||
// #define KILL_PIN_INVERTING true // Enable MKSPWC support
|
|||
#define SERVO0_PIN PA8 // Enable BLTOUCH support
|
|||
//#define LED_PIN PB2
|
|||
|
|||
#ifndef SDCARD_CONNECTION |
|||
#define SDCARD_CONNECTION ONBOARD |
|||
#endif |
|||
|
|||
// #define USE_NEW_SPI_API 1
|
|||
|
|||
//
|
|||
// Onboard SD card
|
|||
// NOT compatible with LCD
|
|||
//
|
|||
// detect pin dont work when ONBOARD and NO_SD_HOST_DRIVE disabled
|
|||
#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD |
|||
#define CUSTOM_SPI_PINS |
|||
#if ENABLED(CUSTOM_SPI_PINS) |
|||
|
|||
#if USE_NEW_SPI_API |
|||
#define SD_SPI MARLIN_SPI(HardwareSPI3, PC9) |
|||
#else |
|||
#define ENABLE_SPI3 |
|||
#define SS_PIN -1 |
|||
#define SDSS PC9 |
|||
#define SCK_PIN PC10 |
|||
#define MISO_PIN PC11 |
|||
#define MOSI_PIN PC12 |
|||
#endif |
|||
#define SD_DETECT_PIN PD12 |
|||
#endif |
|||
#endif |
|||
|
|||
/*
|
|||
//
|
|||
// LCD SD
|
|||
//
|
|||
#if SDCARD_CONNECTION == LCD |
|||
#define CUSTOM_SPI_PINS |
|||
#if ENABLED(CUSTOM_SPI_PINS) |
|||
#define ENABLE_SPI1 |
|||
#define SDSS PE10 |
|||
#define SCK_PIN PA5 |
|||
#define MISO_PIN PA6 |
|||
#define MOSI_PIN PA7 |
|||
#define SD_DETECT_PIN PE12 |
|||
#endif |
|||
#endif |
|||
*/ |
|||
|
|||
//
|
|||
// LCD / Controller
|
|||
#define SPI_FLASH |
|||
// #define HAS_SPI_FLASH 1
|
|||
#define SPI_DEVICE 2 |
|||
#define SPI_FLASH_SIZE 0x1000000 |
|||
#if ENABLED(SPI_FLASH) |
|||
#define W25QXX_CS_PIN PB12 |
|||
#define W25QXX_MOSI_PIN PB15 |
|||
#define W25QXX_MISO_PIN PB14 |
|||
#define W25QXX_SCK_PIN PB13 |
|||
#endif |
|||
|
|||
/**
|
|||
* _____ _____ |
|||
* (BEEPER)PC5 | · · | PE13(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK) |
|||
* (LCD_EN)PD13 | · · | PC6(LCD_RS) (BTN_EN1) PE8 | · · | PE10 (SPI1 CS) |
|||
* (LCD_D4)PE14 | · · | PE15(LCD_D5) (BTN_EN2) PE11 | · · | PA7 (SPI1 MOSI) |
|||
* (LCD_D6)PD11 | · · | PD10(LCD_D7) (SPI DET) PE12 | · · | RESET |
|||
* GND | · · | 5V GND | · · | 3.3V |
|||
* ￣￣￣ ￣￣￣ |
|||
* EXP1 EXP2 |
|||
*/ |
|||
|
|||
#if EITHER(TFT_480x320_SPI, TFT_LVGL_UI_SPI) |
|||
#ifndef TOUCH_CALIBRATION_X |
|||
#define TOUCH_CALIBRATION_X -17253 |
|||
#endif |
|||
#ifndef TOUCH_CALIBRATION_Y |
|||
#define TOUCH_CALIBRATION_Y 11579 |
|||
#endif |
|||
#ifndef TOUCH_OFFSET_X |
|||
#define TOUCH_OFFSET_X 514 |
|||
#endif |
|||
#ifndef TOUCH_OFFSET_Y |
|||
#define TOUCH_OFFSET_Y -24 |
|||
#endif |
|||
#ifndef TOUCH_ORIENTATION |
|||
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE |
|||
#endif |
|||
|
|||
#define TFT_CS_PIN PD11 |
|||
#define TFT_SCK_PIN PA5 |
|||
#define TFT_MISO_PIN PA6 |
|||
#define TFT_MOSI_PIN PA7 |
|||
#define TFT_DC_PIN PD10 |
|||
#define TFT_RST_PIN PC6 |
|||
#define TFT_A0_PIN TFT_DC_PIN |
|||
|
|||
#define TFT_RESET_PIN PC6 |
|||
#define TFT_BACKLIGHT_PIN PD13 |
|||
|
|||
#define TOUCH_BUTTONS_HW_SPI |
|||
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1 |
|||
|
|||
#define LCD_BACKLIGHT_PIN PD13 |
|||
#ifndef TFT_WIDTH |
|||
#define TFT_WIDTH 480 |
|||
#endif |
|||
#ifndef TFT_HEIGHT |
|||
#define TFT_HEIGHT 320 |
|||
#endif |
|||
|
|||
#define TOUCH_CS_PIN PE14 // SPI1_NSS
|
|||
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
|||
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
|||
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
|||
|
|||
#define BTN_EN1 PE8 |
|||
#define BTN_EN2 PE11 |
|||
#define BEEPER_PIN PC5 |
|||
#define BTN_ENC PE13 |
|||
|
|||
#define LCD_READ_ID 0xD3 |
|||
#define LCD_USE_DMA_SPI |
|||
|
|||
// #define TFT_DRIVER ST7796
|
|||
#define TFT_BUFFER_SIZE 14400 |
|||
|
|||
#elif HAS_SPI_LCD |
|||
#define BEEPER_PIN PC5 |
|||
#define BTN_ENC PE13 |
|||
#define LCD_PINS_ENABLE PD13 |
|||
#define LCD_PINS_RS PC6 |
|||
#define BTN_EN1 PE8 |
|||
#define BTN_EN2 PE11 |
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
|
|||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|||
#if ENABLED(MKS_MINI_12864) |
|||
//#define LCD_BACKLIGHT_PIN -1
|
|||
//#define LCD_RESET_PIN -1
|
|||
#define DOGLCD_A0 PD11 |
|||
#define DOGLCD_CS PE15 |
|||
//#define DOGLCD_SCK PA5
|
|||
//#define DOGLCD_MOSI PA7
|
|||
|
|||
// Required for MKS_MINI_12864 with this board
|
|||
//#define MKS_LCD12864B
|
|||
//#undef SHOW_BOOTSCREEN
|
|||
|
|||
#else // !MKS_MINI_12864
|
|||
|
|||
#define LCD_PINS_D4 PE14 |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 PE15 |
|||
#define LCD_PINS_D6 PD11 |
|||
#define LCD_PINS_D7 PD10 |
|||
#endif |
|||
|
|||
#ifndef ST7920_DELAY_1 |
|||
#define ST7920_DELAY_1 DELAY_NS(96) |
|||
#endif |
|||
#ifndef ST7920_DELAY_2 |
|||
#define ST7920_DELAY_2 DELAY_NS(48) |
|||
#endif |
|||
#ifndef ST7920_DELAY_3 |
|||
#define ST7920_DELAY_3 DELAY_NS(600) |
|||
#endif |
|||
|
|||
#endif // !MKS_MINI_12864
|
|||
|
|||
#elif ENABLED(SPI_GRAPHICAL_TFT) |
|||
#define SPI_TFT_CS_PIN PD11 |
|||
#define SPI_TFT_SCK_PIN PA5 |
|||
#define SPI_TFT_MISO_PIN PA6 |
|||
#define SPI_TFT_MOSI_PIN PA7 |
|||
#define SPI_TFT_DC_PIN PD10 |
|||
#define SPI_TFT_RST_PIN PC6 |
|||
|
|||
#define LCD_BACKLIGHT_PIN PD13 |
|||
|
|||
#define TOUCH_CS_PIN PE14 // SPI1_NSS
|
|||
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
|||
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
|||
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
|||
|
|||
#define BTN_EN1 PE8 |
|||
#define BTN_EN2 PE11 |
|||
#define BEEPER_PIN PC5 |
|||
#define BTN_ENC PE13 |
|||
#endif // HAS_SPI_LCD
|
|||
Loading…
Reference in new issue