From 9d9f303c5eb4be828a9ddc0a26fc7a5a726521da Mon Sep 17 00:00:00 2001 From: ellensp <530024+ellensp@users.noreply.github.com> Date: Fri, 23 Sep 2022 05:20:17 +1200 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=BA=20FYSETC=20Mini=2012864=202.1=20pi?= =?UTF-8?q?ns=20for=20Creality=20V4=20(#24624)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/pins/stm32f1/pins_CREALITY_V4.h | 70 +++++++++++++++++++--- 1 file changed, 62 insertions(+), 8 deletions(-) diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index 5a3e7337ad..56caa7d35e 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -161,7 +161,7 @@ #define SDIO_SUPPORT #define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer -#if ENABLED(CR10_STOCKDISPLAY) +#if EITHER(CR10_STOCKDISPLAY, FYSETC_MINI_12864_2_1) #if ENABLED(RET6_12864_LCD) @@ -169,7 +169,7 @@ * RET6 12864 LCD * ------ * PC6 | 1 2 | PB2 - * PB10 | 3 4 | PE8 + * PB10 | 3 4 | PB11 * PB14 5 6 | PB13 * PB12 | 7 8 | PB15 * GND | 9 10 | 5V @@ -179,16 +179,12 @@ #define EXP1_01_PIN PC6 #define EXP1_02_PIN PB2 #define EXP1_03_PIN PB10 - #define EXP1_04_PIN PE8 + #define EXP1_04_PIN PB11 #define EXP1_05_PIN PB14 #define EXP1_06_PIN PB13 #define EXP1_07_PIN PB12 #define EXP1_08_PIN PB15 - #ifndef HAS_PIN_27_BOARD - #define BEEPER_PIN EXP1_01_PIN - #endif - #elif ENABLED(VET6_12864_LCD) /** @@ -212,8 +208,11 @@ #define EXP1_08_PIN PA7 #else - #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." + #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for the LCD with the Creality V4 controller." #endif +#endif + +#if ENABLED(CR10_STOCKDISPLAY) #define LCD_PINS_RS EXP1_07_PIN #define LCD_PINS_ENABLE EXP1_08_PIN @@ -223,6 +222,10 @@ #define BTN_EN1 EXP1_03_PIN #define BTN_EN2 EXP1_05_PIN + #ifndef HAS_PIN_27_BOARD + #define BEEPER_PIN EXP1_01_PIN + #endif + #elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD) #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI @@ -248,4 +251,55 @@ #define BEEPER_PIN EXP1_06_PIN #endif +#elif ENABLED(FYSETC_MINI_12864_2_1) + + #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING + #error "CAUTION! FYSETC_MINI_12864_2_1 and clones require wiring modifications. See 'pins_CREALITY_V4.h' for details. Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning" + #endif + + #if SD_CONNECTION_IS(LCD) + #error "The LCD sdcard is not connected with this configuration" + #endif + + /** + * + * Board (RET6 12864 LCD) Display + * ------ ------ + * (EN1) PC6 | 1 2 | PB2 (BTN_ENC) 5V |10 9 | GND + * (LCD_CS) PB10 | 3 4 | PB11 (LCD RESET) -- | 8 7 | -- + * (LCD_A0) PB14 5 6 | PB13 (EN2) (DIN) | 6 5 (LCD RESET) + * (LCD_SCK)PB12 | 7 8 | PB15 (MOSI) (LCD_A0) | 4 3 | (LCD_CS) + * GND | 9 10 | 5V (BTN_ENC) | 2 1 | -- + * ------ ------ + * EXP1 EXP1 + * + * ------ + * ----- -- |10 9 | -- + * | 1 | VCC (RESET) | 8 7 | -- + * | 2 | PA13 (DIN) (MOSI) | 6 5 (EN2) + * | 3 | PA14 -- | 4 3 | (EN1) + * | 4 | GND (LCD_SCK)| 2 1 | -- + * ----- ------ + * Debug port EXP2 + * + * Needs custom cable. Connect EN2-EN2, LCD_CS-LCD_CS and so on. + * Debug port is just above EXP1, You need to add pins + * + */ + + #define BTN_ENC EXP1_02_PIN + #define BTN_EN1 EXP1_01_PIN + #define BTN_EN2 EXP1_06_PIN + #define BEEPER_PIN -1 + + #define DOGLCD_CS EXP1_03_PIN + #define DOGLCD_A0 EXP1_05_PIN + #define DOGLCD_SCK EXP1_07_PIN + #define DOGLCD_MOSI EXP1_08_PIN + #define LCD_RESET_PIN EXP1_04_PIN + + #define FORCE_SOFT_SPI + #define LCD_BACKLIGHT_PIN -1 + #define NEOPIXEL_PIN PA13 + #endif