From 09b84faa00485a2299e09146825af137743635de Mon Sep 17 00:00:00 2001 From: David Forrest Date: Fri, 10 Jan 2014 15:23:30 -0500 Subject: [PATCH 1/5] Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 --- Marlin/Configuration.h | 1 + Marlin/pins.h | 125 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 126 insertions(+) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 4570e34e2c..537ff7a295 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -62,6 +62,7 @@ // 81 = Printrboard (AT90USB1286) // 82 = Brainwave (AT90USB646) // 83 = SAV Mk-I (AT90USB1286) +// 84 = Teensy++2.0 (AT90USB1286) // CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make // 9 = Gen3+ // 70 = Megatronics // 701= Megatronics v2.0 diff --git a/Marlin/pins.h b/Marlin/pins.h index 14eff02ccb..c3644a086a 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -1650,6 +1650,10 @@ #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. #endif +#ifdef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional. +#error These Teensylu/Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h +#endif + #define LARGE_FLASH true #define X_STEP_PIN 0 @@ -1857,6 +1861,127 @@ #endif // MOTHERBOARD == 83 +/**************************************************************************************** +* Teensy++ 2.0 Breadboard pin assignments (AT90USB1286) +* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! + http://www.pjrc.com/teensy/teensyduino.html +* See http://reprap.org/wiki/Printrboard for more info +* CLI build: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make +* +****************************************************************************************/ +#if MOTHERBOARD == 84 +#define KNOWN_BOARD 1 +#define AT90USB 1286 // Disable MarlinSerial etc. + +#ifndef __AVR_AT90USB1286__ +#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. +#endif + +#define LARGE_FLASH true + +/* +DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a TeensyBreadboard: + + USB + GND GND |-----#####-----| +5V ATX +5SB + ATX PS_ON PWM 27 |b7 ##### b6| 26 PWM* Stepper Enable + PWM 0 |d0 b5| 25 PWM* + PWM 1 |d1 b4| 24 PWM + X_MIN 2 |d2 b3| 23 MISO_PIN + Y_MIN 3 |d3 b2| 22 MOSI_PIN + Z_MIN 4 |d4 * * b1| 21 SCK_PIN + 5 |d5 e e b0| 20 SDSS + LED 6 |d6 5 4 e7| 19 + 7 |d7 e6| 18 + LCD RS 8 |e0 | GND + LCD EN 9 |e1 a4 a0 R| AREF + LCD D4 10 |c0 a5 a1 f0| 38 A0 ENC_1 + LCD D5 11 |c1 a6 a2 f1| 39 A1 ENC_2 + LCD D6 12 |c2 a7 a3 f2| 40 A2 ENC_CLK + LCD D6 13 |c3 f3| 41 A3 + Bed Heat PWM 14 |c4 V G R f4| 42 A4 + Extruder Heat PWM 15 |c5 c n S f5| 43 A5 + Fan PWM 16 |c6 c d T f6| 44 A6 Bed TC + 17 |c7 * * * f7| 45 A7 Extruder TC * 4.7k * +5 + ----------------- + + Interior E4: 36, INT4 + Interior E5: 37, INT5 + Interior PA0-7: 28-35 -- Printrboard and Teensylu use these pins for step & direction: + T++ PA Signal Marlin + + Z STEP 32 a4 a0 28 X STEP + Z DIR 33 a5 a1 29 X DIR + E STEP 34 a6 a2 30 Y STEP + E DIR 35 a7 a3 31 Y DIR + +*/ + +#ifndef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical. + #error Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config + // or build from command line with: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make +#endif + +#define X_STEP_PIN 28 // 0 Marlin +#define X_DIR_PIN 29 // 1 Marlin +#define X_ENABLE_PIN 26 + +#define Y_STEP_PIN 30 // 2 Marlin +#define Y_DIR_PIN 31 // 3 +#define Y_ENABLE_PIN 26 // Shared w/x + +#define Z_STEP_PIN 32 // 4 +#define Z_DIR_PIN 33 // 5 +#define Z_ENABLE_PIN 26 // Shared w/x + +#define E0_STEP_PIN 34 // 6 +#define E0_DIR_PIN 35 // 7 +#define E0_ENABLE_PIN 26 // Shared w/x + +#define HEATER_0_PIN 15 // 21 // Extruder +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 14 // 20 // Bed +#define FAN_PIN 16 // 22 // Fan + +#define X_STOP_PIN 2 +#define Y_STOP_PIN 3 +#define Z_STOP_PIN 4 + +#define TEMP_0_PIN 7 // Extruder / Analog pin numbering +#define TEMP_BED_PIN 6 // Bed / Analog pin numbering +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 + +#define SDPOWER -1 +#define SDCARDDETECT -1 +#define SDSS 20 // 8 +#define LED_PIN 6 +#define PS_ON_PIN 27 +#define KILL_PIN -1 +#define ALARM_PIN -1 + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define SCK_PIN 21 // 9 + #define MISO_PIN 23 // 11 + #define MOSI_PIN 22 // 10 +#endif + +#ifdef ULTIPANEL +#define LCD_PINS_RS 8 +#define LCD_PINS_ENABLE 9 +#define LCD_PINS_D4 10 +#define LCD_PINS_D5 11 +#define LCD_PINS_D6 12 +#define LCD_PINS_D7 13 +#define BTN_EN1 38 +#define BTN_EN2 39 +#define BTN_ENC 40 +#endif + +#endif // MOTHERBOARD == 84 (Teensy++2.0 Breadboard) + /**************************************************************************************** * Gen3+ pin assignment From 07c0eeee99d5d464f33e5d7f0920dc28719ffeeb Mon Sep 17 00:00:00 2001 From: Justin Nesselrotte Date: Sun, 1 Jun 2014 19:04:41 -0500 Subject: [PATCH 2/5] Fixed a comment in the planner --- Marlin/planner.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/planner.h b/Marlin/planner.h index 9df0174602..837199eb7a 100644 --- a/Marlin/planner.h +++ b/Marlin/planner.h @@ -151,7 +151,7 @@ FORCE_INLINE block_t *plan_get_current_block() return(block); } -// Gets the current block. Returns NULL if buffer empty +// Returns true if the buffer has a queued block, false otherwise FORCE_INLINE bool blocks_queued() { if (block_buffer_head == block_buffer_tail) { From 29e7639933e29feaf58bc657e80c47e88716b02b Mon Sep 17 00:00:00 2001 From: Dim3nsioneer Date: Mon, 2 Jun 2014 08:13:09 +0200 Subject: [PATCH 3/5] Add switch unused feeder(s) off Having the non-active feeder motors powered on all the time is not necessary. A feature to deactivate the unused feeder motors has been implemented. The feature is enabled on default but can be switched off in the configuration. --- Marlin/Configuration.h | 1 + Marlin/planner.cpp | 20 ++++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 537ff7a295..5ee06d7108 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -305,6 +305,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DISABLE_Y false #define DISABLE_Z false #define DISABLE_E false // For all extruders +#define DISABLE_UNSELECTED_E true //disable only not selected extruders and keep selected extruder active #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index bfc71323fe..db53a02cb2 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -657,12 +657,24 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi if(block->steps_z != 0) enable_z(); #endif - // Enable all + // Enable extruder(s) if(block->steps_e != 0) { - enable_e0(); - enable_e1(); - enable_e2(); + if (DISABLE_UNSELECTED_E) //enable only selected extruder + { + switch(extruder) + { + case 0: enable_e0(); disable_e1(); disable_e2(); break; + case 1: disable_e0(); enable_e1(); disable_e2(); break; + case 2: disable_e0(); disable_e1(); enable_e2(); break; + } + } + else //enable all + { + enable_e0(); + enable_e1(); + enable_e2(); + } } if (block->steps_e == 0) From 8a32c5395bb51e06819716d02d3e57c44655f917 Mon Sep 17 00:00:00 2001 From: Dim3nsioneer Date: Mon, 2 Jun 2014 14:07:02 +0200 Subject: [PATCH 4/5] renaming the disable inactive extruder feature --- Marlin/Configuration.h | 2 +- Marlin/planner.cpp | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 5ee06d7108..1355a7ab9f 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -305,7 +305,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DISABLE_Y false #define DISABLE_Z false #define DISABLE_E false // For all extruders -#define DISABLE_UNSELECTED_E true //disable only not selected extruders and keep selected extruder active +#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index db53a02cb2..5b20f86f99 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -660,7 +660,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi // Enable extruder(s) if(block->steps_e != 0) { - if (DISABLE_UNSELECTED_E) //enable only selected extruder + if (DISABLE_INACTIVE_EXTRUDER) //enable only selected extruder { switch(extruder) { From 0de826160ef590fbf2576d69299c8c4640fc9d94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Gina=20H=C3=A4u=C3=9Fge?= Date: Mon, 2 Jun 2014 17:11:32 +0200 Subject: [PATCH 5/5] M30 response is missing linefeed, "ok" therefore not on own line This leads to the command not being acknowledged properly by the firmware, leading to consecutive issues in host software waiting for an acknowledgement. --- Marlin/cardreader.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp index 5fb8dcc0ff..d2fb418fba 100644 --- a/Marlin/cardreader.cpp +++ b/Marlin/cardreader.cpp @@ -437,7 +437,7 @@ void CardReader::removeFile(char* name) if (file.remove(curDir, fname)) { SERIAL_PROTOCOLPGM("File deleted:"); - SERIAL_PROTOCOL(fname); + SERIAL_PROTOCOLLN(fname); sdpos = 0; } else