diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index b99ec6a29e..07478e372b 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -144,13 +144,13 @@
 // Comment the following line to disable PID and enable bang-bang.
 #define PIDTEMP
 #define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
-#define PID_MAX 255 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
+#define PID_MAX BANG_MAX // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
 #ifdef PIDTEMP
   //#define PID_DEBUG // Sends debug data to the serial port.
   //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
   #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                   // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
-  #define PID_INTEGRAL_DRIVE_MAX 255  //limit for the integral term
+  #define PID_INTEGRAL_DRIVE_MAX PID_MAX  //limit for the integral term
   #define K1 0.95 //smoothing factor within the PID
   #define PID_dT ((OVERSAMPLENR * 10.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
 
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index a3fedbf986..e7f640953c 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -455,7 +455,14 @@ void manage_heater()
           //K1 defined in Configuration.h in the PID settings
           #define K2 (1.0-K1)
           dTerm[e] = (Kd * (pid_input - temp_dState[e]))*K2 + (K1 * dTerm[e]);
-          pid_output = constrain(pTerm[e] + iTerm[e] - dTerm[e], 0, PID_MAX);
+          pid_output = pTerm[e] + iTerm[e] - dTerm[e];
+          if (pid_output > PID_MAX) {
+            if (pid_error[e] > 0 )  temp_iState[e] -= pid_error[e]; // conditional un-integration
+            pid_output=PID_MAX;
+          } else if (pid_output < 0){
+            if (pid_error[e] < 0 )  temp_iState[e] -= pid_error[e]; // conditional un-integration
+            pid_output=0;
+          }
         }
         temp_dState[e] = pid_input;
     #else 
@@ -558,7 +565,14 @@ void manage_heater()
 		  dTerm_bed= (bedKd * (pid_input - temp_dState_bed))*K2 + (K1 * dTerm_bed);
 		  temp_dState_bed = pid_input;
 
-		  pid_output = constrain(pTerm_bed + iTerm_bed - dTerm_bed, 0, MAX_BED_POWER);
+		  pid_output = pTerm_bed + iTerm_bed - dTerm_bed;
+          	  if (pid_output > MAX_BED_PID) {
+            	    if (pid_error_bed > 0 )  temp_iState_bed -= pid_error_bed; // conditional un-integration
+                    pid_output=PID_MAX;
+          	  } else if (pid_output < 0){
+            	    if (pid_error_bed < 0 )  temp_iState_bed -= pid_error_bed; // conditional un-integration
+                    pid_output=0;
+                  }
 
     #else 
       pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);