Browse Source

Flag EEPROM write errors on serial output

- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
pull/1/head
Scott Lahteine 10 years ago
parent
commit
9bc9051405
  1. 51
      Marlin/ConfigurationStore.cpp
  2. 2
      Marlin/Marlin.h
  3. 2
      Marlin/language.h

51
Marlin/ConfigurationStore.cpp

@ -62,17 +62,24 @@
*
*/
#include "Marlin.h"
#include "language.h"
#include "planner.h"
#include "temperature.h"
#include "ultralcd.h"
#include "ConfigurationStore.h"
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) {
do {
uint8_t c;
while(size--) {
eeprom_write_byte((unsigned char*)pos, *value);
eeprom_read_byte((unsigned char*)pos, *c);
if (*c != *value) {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
}
pos++;
value++;
} while (--size);
};
}
void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
do {
@ -471,7 +478,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" Y", axis_steps_per_unit[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", axis_steps_per_unit[Z_AXIS]);
SERIAL_ECHOPAIR(" E", axis_steps_per_unit[E_AXIS]);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
@ -483,7 +490,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" M365 X", axis_scaling[X_AXIS]);
SERIAL_ECHOPAIR(" Y", axis_scaling[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", axis_scaling[Z_AXIS]);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
#endif // SCARA
@ -495,7 +502,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" Y", max_feedrate[Y_AXIS]);
SERIAL_ECHOPAIR(" Z", max_feedrate[Z_AXIS]);
SERIAL_ECHOPAIR(" E", max_feedrate[E_AXIS]);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
if (!forReplay) {
@ -506,7 +513,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" Y", max_acceleration_units_per_sq_second[Y_AXIS] );
SERIAL_ECHOPAIR(" Z", max_acceleration_units_per_sq_second[Z_AXIS] );
SERIAL_ECHOPAIR(" E", max_acceleration_units_per_sq_second[E_AXIS]);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration");
@ -514,7 +521,7 @@ void Config_PrintSettings(bool forReplay) {
}
SERIAL_ECHOPAIR(" M204 S", acceleration );
SERIAL_ECHOPAIR(" T", retract_acceleration);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
if (!forReplay) {
@ -527,7 +534,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" X", max_xy_jerk );
SERIAL_ECHOPAIR(" Z", max_z_jerk);
SERIAL_ECHOPAIR(" E", max_e_jerk);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
if (!forReplay) {
@ -537,7 +544,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" M206 X", add_homing[X_AXIS] );
SERIAL_ECHOPAIR(" Y", add_homing[Y_AXIS] );
SERIAL_ECHOPAIR(" Z", add_homing[Z_AXIS] );
SERIAL_ECHOLN("");
SERIAL_EOL;
#ifdef DELTA
SERIAL_ECHO_START;
@ -548,14 +555,14 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" M666 X", endstop_adj[X_AXIS] );
SERIAL_ECHOPAIR(" Y", endstop_adj[Y_AXIS] );
SERIAL_ECHOPAIR(" Z", endstop_adj[Z_AXIS] );
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Delta settings: L=delta_diagonal_rod, R=delta_radius, S=delta_segments_per_second");
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" M665 L", delta_diagonal_rod );
SERIAL_ECHOPAIR(" R", delta_radius );
SERIAL_ECHOPAIR(" S", delta_segments_per_second );
SERIAL_ECHOLN("");
SERIAL_EOL;
#endif // DELTA
#ifdef PIDTEMP
@ -567,7 +574,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echos values for E0
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
SERIAL_ECHOLN("");
SERIAL_EOL;
#endif // PIDTEMP
#ifdef FWRETRACT
@ -580,7 +587,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOPAIR(" M207 S", retract_length);
SERIAL_ECHOPAIR(" F", retract_feedrate*60);
SERIAL_ECHOPAIR(" Z", retract_zlift);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)");
@ -588,14 +595,14 @@ void Config_PrintSettings(bool forReplay) {
}
SERIAL_ECHOPAIR(" M208 S", retract_recover_length);
SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
SERIAL_ECHO_START;
}
SERIAL_ECHOPAIR(" M209 S", (unsigned long)(autoretract_enabled ? 1 : 0));
SERIAL_ECHOLN("");
SERIAL_EOL;
#if EXTRUDERS > 1
if (!forReplay) {
@ -603,10 +610,10 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHOLNPGM("Multi-extruder settings:");
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" Swap retract length (mm): ", retract_length_swap);
SERIAL_ECHOLN("");
SERIAL_EOL;
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" Swap rec. addl. length (mm): ", retract_recover_length_swap);
SERIAL_ECHOLN("");
SERIAL_EOL;
}
#endif // EXTRUDERS > 1
@ -619,20 +626,20 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHO_START;
}
SERIAL_ECHOPAIR(" M200 D", filament_size[0]);
SERIAL_ECHOLN("");
SERIAL_EOL;
#if EXTRUDERS > 1
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" M200 T1 D", filament_size[1]);
SERIAL_ECHOLN("");
SERIAL_EOL;
#if EXTRUDERS > 2
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
SERIAL_ECHOLN("");
SERIAL_EOL;
#if EXTRUDERS > 3
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
SERIAL_ECHOLN("");
SERIAL_EOL;
#endif
#endif
#endif
@ -652,7 +659,7 @@ void Config_PrintSettings(bool forReplay) {
SERIAL_ECHO(" M");
SERIAL_ECHO(CUSTOM_M_CODE_SET_Z_PROBE_OFFSET);
SERIAL_ECHOPAIR(" Z", -zprobe_zoffset);
SERIAL_ECHOLN("");
SERIAL_EOL;
#endif
}

2
Marlin/Marlin.h

@ -86,6 +86,8 @@ extern const char echomagic[] PROGMEM;
#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value)))
#define SERIAL_EOL SERIAL_ECHOLN("")
void serial_echopair_P(const char *s_P, float v);
void serial_echopair_P(const char *s_P, double v);
void serial_echopair_P(const char *s_P, unsigned long v);

2
Marlin/language.h

@ -155,6 +155,8 @@
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
// LCD Menu Messages
#include LANGUAGE_INCLUDE

Loading…
Cancel
Save