From 99532135133846a52307f28278795cabb07163b9 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 25 Aug 2018 03:22:59 -0500 Subject: [PATCH] Add EDITABLE_SERVO_ANGLES to example configs --- .../src/config/examples/AlephObjects/TAZ4/Configuration.h | 7 ++++--- .../src/config/examples/AliExpress/CL-260/Configuration.h | 7 ++++--- Marlin/src/config/examples/Anet/A6/Configuration.h | 7 ++++--- Marlin/src/config/examples/Anet/A8/Configuration.h | 7 ++++--- Marlin/src/config/examples/Azteeg/X5GT/Configuration.h | 7 ++++--- .../config/examples/BIBO/TouchX/cyclops/Configuration.h | 7 ++++--- .../config/examples/BIBO/TouchX/default/Configuration.h | 7 ++++--- Marlin/src/config/examples/BQ/Hephestos/Configuration.h | 7 ++++--- Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h | 7 ++++--- Marlin/src/config/examples/BQ/WITBOX/Configuration.h | 7 ++++--- Marlin/src/config/examples/Cartesio/Configuration.h | 7 ++++--- Marlin/src/config/examples/Creality/CR-10/Configuration.h | 7 ++++--- Marlin/src/config/examples/Creality/CR-10S/Configuration.h | 7 ++++--- .../src/config/examples/Creality/CR-10mini/Configuration.h | 7 ++++--- Marlin/src/config/examples/Creality/CR-8/Configuration.h | 7 ++++--- .../src/config/examples/Creality/Ender-2/Configuration.h | 7 ++++--- .../src/config/examples/Creality/Ender-3/Configuration.h | 7 ++++--- .../src/config/examples/Creality/Ender-4/Configuration.h | 7 ++++--- Marlin/src/config/examples/Einstart-S/Configuration.h | 7 ++++--- Marlin/src/config/examples/Felix/Configuration.h | 7 ++++--- Marlin/src/config/examples/Felix/DUAL/Configuration.h | 7 ++++--- .../src/config/examples/FolgerTech/i3-2020/Configuration.h | 7 ++++--- Marlin/src/config/examples/Geeetech/GT2560/Configuration.h | 7 ++++--- .../examples/Geeetech/I3_Pro_X-GT2560/Configuration.h | 7 ++++--- .../Geeetech/Prusa i3 Pro B/bltouch/Configuration.h | 7 ++++--- .../Geeetech/Prusa i3 Pro B/noprobe/Configuration.h | 7 ++++--- .../examples/Geeetech/Prusa i3 Pro C/Configuration.h | 7 ++++--- .../examples/Geeetech/Prusa i3 Pro W/Configuration.h | 7 ++++--- .../src/config/examples/Infitary/i3-M508/Configuration.h | 7 ++++--- Marlin/src/config/examples/JGAurora/A5/Configuration.h | 7 ++++--- Marlin/src/config/examples/MakerParts/Configuration.h | 7 ++++--- Marlin/src/config/examples/Malyan/M150/Configuration.h | 7 ++++--- Marlin/src/config/examples/Malyan/M200/Configuration.h | 7 ++++--- .../src/config/examples/Micromake/C1/basic/Configuration.h | 7 ++++--- .../config/examples/Micromake/C1/enhanced/Configuration.h | 7 ++++--- Marlin/src/config/examples/Mks/Sbase/Configuration.h | 7 ++++--- .../src/config/examples/RepRapPro/Huxley/Configuration.h | 7 ++++--- .../examples/RepRapWorld/Megatronics/Configuration.h | 7 ++++--- Marlin/src/config/examples/RigidBot/Configuration.h | 7 ++++--- Marlin/src/config/examples/SCARA/Configuration.h | 7 ++++--- Marlin/src/config/examples/STM32F10/Configuration.h | 7 ++++--- Marlin/src/config/examples/STM32F4/Configuration.h | 7 ++++--- Marlin/src/config/examples/Sanguinololu/Configuration.h | 7 ++++--- Marlin/src/config/examples/TheBorg/Configuration.h | 7 ++++--- Marlin/src/config/examples/TinyBoy2/Configuration.h | 7 ++++--- Marlin/src/config/examples/Tronxy/X1/Configuration.h | 7 ++++--- Marlin/src/config/examples/Tronxy/X3A/Configuration.h | 7 ++++--- Marlin/src/config/examples/Tronxy/X5S/Configuration.h | 7 ++++--- Marlin/src/config/examples/Tronxy/XY100/Configuration.h | 7 ++++--- .../config/examples/UltiMachine/Archim2/Configuration.h | 7 ++++--- Marlin/src/config/examples/Velleman/K8200/Configuration.h | 7 ++++--- Marlin/src/config/examples/Velleman/K8400/Configuration.h | 7 ++++--- .../examples/Velleman/K8400/Dual-head/Configuration.h | 7 ++++--- .../config/examples/Wanhao/Duplicator 6/Configuration.h | 7 ++++--- Marlin/src/config/examples/adafruit/ST7565/Configuration.h | 7 ++++--- .../examples/delta/FLSUN/auto_calibrate/Configuration.h | 7 ++++--- .../src/config/examples/delta/FLSUN/kossel/Configuration.h | 7 ++++--- .../examples/delta/FLSUN/kossel_mini/Configuration.h | 7 ++++--- .../config/examples/delta/Hatchbox_Alpha/Configuration.h | 7 ++++--- Marlin/src/config/examples/delta/generic/Configuration.h | 7 ++++--- .../src/config/examples/delta/kossel_mini/Configuration.h | 7 ++++--- .../src/config/examples/delta/kossel_pro/Configuration.h | 7 ++++--- Marlin/src/config/examples/delta/kossel_xl/Configuration.h | 7 ++++--- .../src/config/examples/gCreate/gMax1.5+/Configuration.h | 7 ++++--- Marlin/src/config/examples/makibox/Configuration.h | 7 ++++--- Marlin/src/config/examples/stm32f103ret6/Configuration.h | 7 ++++--- Marlin/src/config/examples/tvrrug/Round2/Configuration.h | 7 ++++--- Marlin/src/config/examples/wt150/Configuration.h | 7 ++++--- 68 files changed, 272 insertions(+), 204 deletions(-) diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 296963edfa..1152006d26 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -1940,9 +1940,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 4be1966c80..11aa98ac05 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index f7c01a3b22..60d0f11652 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -2101,9 +2101,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 96086bbd03..d9fb74eaee 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -1929,9 +1929,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 546da031e9..84f8ba7bbe 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -1966,9 +1966,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index 690a051230..9569815c4a 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index 075abee0ca..c6b7922222 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index c9051f72bd..2d82412693 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -1908,9 +1908,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 651c337f84..d687a298e7 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index b7ddaf89ca..af4204c947 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -1908,9 +1908,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index b73bf7ff87..a7fea54d15 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -1919,9 +1919,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index f2af5c0a88..af931b3647 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -1956,9 +1956,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index a025b4ea81..cddc06f2af 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -1951,9 +1951,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index 6643861316..f654ab0e03 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -1965,9 +1965,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h index 90f42f48a3..db0b62e174 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h @@ -1956,9 +1956,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h index 36198868c6..e7c1303f85 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h @@ -1950,9 +1950,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h index 760d5ce5c2..da1db3f10f 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h @@ -1950,9 +1950,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h index 084c82ccae..4561497df8 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h @@ -1956,9 +1956,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Einstart-S/Configuration.h b/Marlin/src/config/examples/Einstart-S/Configuration.h index 896e4a108a..59bf8a4a60 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration.h @@ -1935,9 +1935,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index 70dea0836a..8b0b40229b 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -1928,9 +1928,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 3d02326ba1..45e9084c58 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -1928,9 +1928,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index a3e8c9bb99..2be99ce8b1 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1926,9 +1926,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 500, 500 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter #define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index a12c6a3ae9..3dc6dfe1e9 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -1961,9 +1961,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE /** @@ -1975,4 +1973,7 @@ #define LCD_WIDTH_OVERRIDE 20 // Default is 22. For this Geeetech use 20. #endif +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 9822d0ad7f..3bacd21a6d 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 54b3aea36c..b9a5d72dc0 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1962,9 +1962,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 221f7d0858..3de17cd1bb 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1961,9 +1961,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 661db6fd0f..6f44657a8c 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index bd6ad10ed1..db2df210e5 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index cb9af59d81..f5a76a9ce9 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -1924,9 +1924,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 10a758c382..1f5f9d48a8 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -1957,9 +1957,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 1d31a47264..9955299693 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -1940,9 +1940,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 33e604a546..9fb4863de9 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -1948,9 +1948,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index 749a09054f..1505df13b8 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -1945,9 +1945,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index 5cbe0e1c33..1857b6daa5 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -1950,9 +1950,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index b5b06c340f..e14fc781cc 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1924,9 +1924,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index 7444560932..19cb06808c 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h index df24fe6a0e..b3c5759170 100644 --- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h +++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h @@ -1995,9 +1995,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index d0fddf76c3..d74874d1d4 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index aa21ac11d2..ca02b26e81 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 1f9d5036d8..daea7f51fe 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -1933,9 +1933,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 629adc0a76..0c45dd68b3 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -1948,9 +1948,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h index 8ef33bb741..034044a696 100644 --- a/Marlin/src/config/examples/STM32F4/Configuration.h +++ b/Marlin/src/config/examples/STM32F4/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index ae313566c0..92c0fe42de 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -1977,9 +1977,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 0e831e382a..23f8a8788a 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index f205da2b0e..f371e555b6 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -2002,9 +2002,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index 40143d2f85..115ba6d9ec 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h index ba142393a6..43ad3184c2 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h @@ -1925,9 +1925,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index dff30aa73b..add61e23f8 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -1920,9 +1920,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index b3fde900b6..a99b0e7efe 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -1957,9 +1957,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index b09f19c322..effb6fa2e2 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -1946,9 +1946,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index b6555f876e..b1b4d8bb61 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -1981,9 +1981,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 4fb6bd45d2..5cf156bed8 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -1921,9 +1921,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index fafdfdc946..d0e246518a 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1921,9 +1921,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index d870ecfa5b..ef20500e55 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1959,9 +1959,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 36295a73fa..7ff104b9b6 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -1952,9 +1952,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index f3783fe7fd..195b14cf7c 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -2056,9 +2056,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index 67163ce059..3b46f8b164 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -2055,9 +2055,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index b8231b94e1..e5f31bc56b 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -2080,9 +2080,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index ab080919d6..bcef015366 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -2057,9 +2057,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index e2b4686055..3415cf705e 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -2042,9 +2042,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 709213f0e8..72480bb3a5 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -2070,9 +2070,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 88100ff9e1..a390163a04 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -2071,9 +2071,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index 4f7dbedcc7..871d2f5c63 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -2071,9 +2071,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index a60f8f83f0..42c75712cd 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1960,9 +1960,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300, 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index 0529b2058e..07f02391ec 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -1949,9 +1949,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index 0f4554d756..19606944a3 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -1948,9 +1948,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index d77fa8eb61..2ed2ef4c77 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -1915,9 +1915,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index bbbeb7a081..391f8e6611 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -1951,9 +1951,10 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +// Allow servo angle to be edited and saved to EEPROM +//#define EDITABLE_SERVO_ANGLES + #endif // CONFIGURATION_H