From 9823a37362c86f8f722c01af2147075d70234ada Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 16 Mar 2021 15:12:28 -0500 Subject: [PATCH] E1+ Autotemp and Planner comments --- Marlin/src/lcd/extui/ui_api.cpp | 2 - Marlin/src/module/planner.cpp | 171 +++++++++++++++++++------------- Marlin/src/module/planner.h | 33 +++++- 3 files changed, 130 insertions(+), 76 deletions(-) diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp index d83b921648..97d4ec2b08 100644 --- a/Marlin/src/lcd/extui/ui_api.cpp +++ b/Marlin/src/lcd/extui/ui_api.cpp @@ -587,13 +587,11 @@ namespace ExtUI { void setAxisMaxAcceleration_mm_s2(const float &value, const axis_t axis) { planner.set_max_acceleration(axis, value); - planner.reset_acceleration_rates(); } void setAxisMaxAcceleration_mm_s2(const float &value, const extruder_t extruder) { UNUSED_E(extruder); planner.set_max_acceleration(E_AXIS_N(extruder - E0), value); - planner.reset_acceleration_rates(); } #if HAS_FILAMENT_SENSOR diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index dd87a0d24d..c60e9f6cd3 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1248,32 +1248,6 @@ void Planner::recalculate() { recalculate_trapezoids(); } -#if ENABLED(AUTOTEMP) - - void Planner::getHighESpeed() { - static float oldt = 0; - - if (!autotemp_enabled) return; - if (thermalManager.degTargetHotend(0) + 2 < autotemp_min) return; // probably temperature set to zero. - - float high = 0.0; - for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) { - block_t* block = &block_buffer[b]; - if (block->steps.x || block->steps.y || block->steps.z) { - const float se = (float)block->steps.e / block->step_event_count * SQRT(block->nominal_speed_sqr); // mm/sec; - NOLESS(high, se); - } - } - - float t = autotemp_min + high * autotemp_factor; - LIMIT(t, autotemp_min, autotemp_max); - if (t < oldt) t = t * (1 - float(AUTOTEMP_OLDWEIGHT)) + oldt * float(AUTOTEMP_OLDWEIGHT); - oldt = t; - thermalManager.setTargetHotend(t, 0); - } - -#endif // AUTOTEMP - /** * Maintain fans, paste extruder pressure, */ @@ -1398,6 +1372,72 @@ void Planner::check_axes_activity() { #endif } +#if ENABLED(AUTOTEMP) + + #if ENABLED(AUTOTEMP_PROPORTIONAL) + void Planner::_autotemp_update_from_hotend() { + const int16_t target = thermalManager.degTargetHotend(active_extruder); + autotemp_min = target + AUTOTEMP_MIN_P; + autotemp_max = target + AUTOTEMP_MAX_P; + } + #endif + + /** + * Called after changing tools to: + * - Reset or re-apply the default proportional autotemp factor. + * - Enable autotemp if the factor is non-zero. + */ + void Planner::autotemp_update() { + _autotemp_update_from_hotend(); + autotemp_factor = TERN(AUTOTEMP_PROPORTIONAL, AUTOTEMP_FACTOR_P, 0); + autotemp_enabled = autotemp_factor != 0; + } + + /** + * Called by the M104/M109 commands after setting Hotend Temperature + * + */ + void Planner::autotemp_M104_M109() { + _autotemp_update_from_hotend(); + + if (parser.seenval('S')) autotemp_min = parser.value_celsius(); + if (parser.seenval('B')) autotemp_max = parser.value_celsius(); + + // When AUTOTEMP_PROPORTIONAL is enabled, F0 disables autotemp. + // Normally, leaving off F also disables autotemp. + autotemp_factor = parser.seen('F') ? parser.value_float() : TERN(AUTOTEMP_PROPORTIONAL, AUTOTEMP_FACTOR_P, 0); + autotemp_enabled = autotemp_factor != 0; + } + + /** + * Called every so often to adjust the hotend target temperature + * based on the extrusion speed, which is calculated from the blocks + * currently in the planner. + */ + void Planner::getHighESpeed() { + static float oldt = 0; + + if (!autotemp_enabled) return; + if (thermalManager.degTargetHotend(active_extruder) < autotemp_min - 2) return; // Below the min? + + float high = 0.0; + for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) { + block_t* block = &block_buffer[b]; + if (block->steps.x || block->steps.y || block->steps.z) { + const float se = (float)block->steps.e / block->step_event_count * SQRT(block->nominal_speed_sqr); // mm/sec; + NOLESS(high, se); + } + } + + float t = autotemp_min + high * autotemp_factor; + LIMIT(t, autotemp_min, autotemp_max); + if (t < oldt) t *= (1.0f - (AUTOTEMP_OLDWEIGHT)) + oldt * (AUTOTEMP_OLDWEIGHT); + oldt = t; + thermalManager.setTargetHotend(t, active_extruder); + } + +#endif + #if DISABLED(NO_VOLUMETRICS) /** @@ -2959,13 +2999,17 @@ void Planner::reset_acceleration_rates() { TERN_(HAS_LINEAR_E_JERK, recalculate_max_e_jerk()); } -// Recalculate position, steps_to_mm if settings.axis_steps_per_mm changes! +/** + * Recalculate 'position' and 'steps_to_mm'. + * Must be called whenever settings.axis_steps_per_mm changes! + */ void Planner::refresh_positioning() { LOOP_XYZE_N(i) steps_to_mm[i] = 1.0f / settings.axis_steps_per_mm[i]; set_position_mm(current_position); reset_acceleration_rates(); } +// Apply limits to a variable and give a warning if the value was out of range inline void limit_and_warn(float &val, const uint8_t axis, PGM_P const setting_name, const xyze_float_t &max_limit) { const uint8_t lim_axis = axis > E_AXIS ? E_AXIS : axis; const float before = val; @@ -2978,7 +3022,14 @@ inline void limit_and_warn(float &val, const uint8_t axis, PGM_P const setting_n } } -void Planner::set_max_acceleration(const uint8_t axis, float targetValue) { +/** + * For the specified 'axis' set the Maximum Acceleration to the given value (mm/s^2) + * The value may be limited with warning feedback, if configured. + * Calls reset_acceleration_rates to precalculate planner terms in steps. + * + * This hard limit is applied as a block is being added to the planner queue. + */ +void Planner::set_max_acceleration(const uint8_t axis, const float &inMaxAccelMMS2) { #if ENABLED(LIMITED_MAX_ACCEL_EDITING) #ifdef MAX_ACCEL_EDIT_VALUES constexpr xyze_float_t max_accel_edit = MAX_ACCEL_EDIT_VALUES; @@ -2987,15 +3038,21 @@ void Planner::set_max_acceleration(const uint8_t axis, float targetValue) { constexpr xyze_float_t max_accel_edit = DEFAULT_MAX_ACCELERATION; const xyze_float_t max_acc_edit_scaled = max_accel_edit * 2; #endif - limit_and_warn(targetValue, axis, PSTR("Acceleration"), max_acc_edit_scaled); + limit_and_warn(inMaxAccelMMS2, axis, PSTR("Acceleration"), max_acc_edit_scaled); #endif - settings.max_acceleration_mm_per_s2[axis] = targetValue; + settings.max_acceleration_mm_per_s2[axis] = inMaxAccelMMS2; // Update steps per s2 to agree with the units per s2 (since they are used in the planner) reset_acceleration_rates(); } -void Planner::set_max_feedrate(const uint8_t axis, float targetValue) { +/** + * For the specified 'axis' set the Maximum Feedrate to the given value (mm/s) + * The value may be limited with warning feedback, if configured. + * + * This hard limit is applied as a block is being added to the planner queue. + */ +void Planner::set_max_feedrate(const uint8_t axis, const float &inMaxFeedrateMMS) { #if ENABLED(LIMITED_MAX_FR_EDITING) #ifdef MAX_FEEDRATE_EDIT_VALUES constexpr xyze_float_t max_fr_edit = MAX_FEEDRATE_EDIT_VALUES; @@ -3004,13 +3061,20 @@ void Planner::set_max_feedrate(const uint8_t axis, float targetValue) { constexpr xyze_float_t max_fr_edit = DEFAULT_MAX_FEEDRATE; const xyze_float_t max_fr_edit_scaled = max_fr_edit * 2; #endif - limit_and_warn(targetValue, axis, PSTR("Feedrate"), max_fr_edit_scaled); + limit_and_warn(inMaxFeedrateMMS, axis, PSTR("Feedrate"), max_fr_edit_scaled); #endif - settings.max_feedrate_mm_s[axis] = targetValue; + settings.max_feedrate_mm_s[axis] = inMaxFeedrateMMS; } -void Planner::set_max_jerk(const AxisEnum axis, float targetValue) { - #if HAS_CLASSIC_JERK +#if HAS_CLASSIC_JERK + + /** + * For the specified 'axis' set the Maximum Jerk (instant change) to the given value (mm/s) + * The value may be limited with warning feedback, if configured. + * + * This hard limit is applied (to the block start speed) as the block is being added to the planner queue. + */ + void Planner::set_max_jerk(const AxisEnum axis, const float &targetValue) { #if ENABLED(LIMITED_JERK_EDITING) constexpr xyze_float_t max_jerk_edit = #ifdef MAX_JERK_EDIT_VALUES @@ -3023,10 +3087,9 @@ void Planner::set_max_jerk(const AxisEnum axis, float targetValue) { limit_and_warn(targetValue, axis, PSTR("Jerk"), max_jerk_edit); #endif max_jerk[axis] = targetValue; - #else - UNUSED(axis); UNUSED(targetValue); - #endif -} + } + +#endif #if HAS_WIRED_LCD @@ -3069,33 +3132,3 @@ void Planner::set_max_jerk(const AxisEnum axis, float targetValue) { } #endif - -#if ENABLED(AUTOTEMP) - -void Planner::autotemp_update() { - #if ENABLED(AUTOTEMP_PROPORTIONAL) - const int16_t target = thermalManager.degTargetHotend(active_extruder); - autotemp_min = target + AUTOTEMP_MIN_P; - autotemp_max = target + AUTOTEMP_MAX_P; - #endif - autotemp_factor = TERN(AUTOTEMP_PROPORTIONAL, AUTOTEMP_FACTOR_P, 0); - autotemp_enabled = autotemp_factor != 0; -} - - void Planner::autotemp_M104_M109() { - - #if ENABLED(AUTOTEMP_PROPORTIONAL) - const int16_t target = thermalManager.degTargetHotend(active_extruder); - autotemp_min = target + AUTOTEMP_MIN_P; - autotemp_max = target + AUTOTEMP_MAX_P; - #endif - - if (parser.seenval('S')) autotemp_min = parser.value_celsius(); - if (parser.seenval('B')) autotemp_max = parser.value_celsius(); - - // When AUTOTEMP_PROPORTIONAL is enabled, F0 disables autotemp. - // Normally, leaving off F also disables autotemp. - autotemp_factor = parser.seen('F') ? parser.value_float() : TERN(AUTOTEMP_PROPORTIONAL, AUTOTEMP_FACTOR_P, 0); - autotemp_enabled = autotemp_factor != 0; - } -#endif diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index b7ff0ee932..a7aabd9d65 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -460,12 +460,27 @@ class Planner { * Static (class) Methods */ + // Recalculate steps/s^2 accelerations based on mm/s^2 settings static void reset_acceleration_rates(); + + /** + * Recalculate 'position' and 'steps_to_mm'. + * Must be called whenever settings.axis_steps_per_mm changes! + */ static void refresh_positioning(); - static void set_max_acceleration(const uint8_t axis, float targetValue); - static void set_max_feedrate(const uint8_t axis, float targetValue); - static void set_max_jerk(const AxisEnum axis, float targetValue); + // For an axis set the Maximum Acceleration in mm/s^2 + static void set_max_acceleration(const uint8_t axis, const float &inMaxAccelMMS2); + + // For an axis set the Maximum Feedrate in mm/s + static void set_max_feedrate(const uint8_t axis, const float &inMaxFeedrateMMS); + + // For an axis set the Maximum Jerk (instant change) in mm/s + #if HAS_CLASSIC_JERK + static void set_max_jerk(const AxisEnum axis, const float &inMaxJerkMMS); + #else + static inline void set_max_jerk(const AxisEnum, const float&) {} + #endif #if EXTRUDERS FORCE_INLINE static void refresh_e_factor(const uint8_t e) { @@ -883,9 +898,9 @@ class Planner { #if ENABLED(AUTOTEMP) static float autotemp_min, autotemp_max, autotemp_factor; static bool autotemp_enabled; - static void getHighESpeed(); - static void autotemp_M104_M109(); static void autotemp_update(); + static void autotemp_M104_M109(); + static void getHighESpeed(); #endif #if HAS_LINEAR_E_JERK @@ -898,6 +913,14 @@ class Planner { private: + #if ENABLED(AUTOTEMP) + #if ENABLED(AUTOTEMP_PROPORTIONAL) + static void _autotemp_update_from_hotend(); + #else + static inline void _autotemp_update_from_hotend() {} + #endif + #endif + /** * Get the index of the next / previous block in the ring buffer */