andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Fix G76 reachable test (#17005)

vanilla_fb_2.0.x
Scott Lahteine 5 years ago
committed by GitHub
parent
c669420134
commit
97e87d8262
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 67 additions and 105 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 172
      Marlin/src/gcode/calibrate/G76_M871.cpp

172
Marlin/src/gcode/calibrate/G76_M871.cpp
View File

@ -86,6 +86,33 @@ void GcodeSuite::G76() {
return;
#endif
auto report_temps = [](millis_t &ntr, millis_t timeout=0) {
idle_no_sleep();
const millis_t ms = millis();
if (ELAPSED(ms, ntr)) {
ntr = ms + 1000;
thermalManager.print_heater_states(active_extruder);
}
return (timeout && ELAPSED(ms, timeout));
};
auto wait_for_temps = [&](const float tb, const float tp, millis_t &ntr, const millis_t timeout=0) {
SERIAL_ECHOLNPGM("Waiting for bed and probe temperature.");
while (fabs(thermalManager.degBed() - tb) > 0.1f || thermalManager.degProbe() > tp)
if (report_temps(ntr, timeout)) return true;
return false;
};
auto g76_probe = [](const xy_pos_t &xypos) {
do_blocking_move_to_z(5.0); // Raise nozzle before probing
const float measured_z = probe.probe_at_point(xypos, PROBE_PT_NONE, 0, false); // verbose=0, probe_relative=false
if (isnan(measured_z))
SERIAL_ECHOLNPGM("!Received NAN. Aborting.");
else
SERIAL_ECHOLNPAIR_F("Measured: ", measured_z);
return measured_z;
};
#if ENABLED(BLTOUCH)
// Make sure any BLTouch error condition is cleared
bltouch_command(BLTOUCH_RESET, BLTOUCH_RESET_DELAY);
@ -98,111 +125,76 @@ void GcodeSuite::G76() {
// Synchronize with planner
planner.synchronize();
// Report temperatures every second and handle heating timeouts
millis_t next_temp_report = millis() + 1000;
const xyz_pos_t parkpos = { temp_comp.park_point_x, temp_comp.park_point_y, temp_comp.park_point_z };
const xy_pos_t ppos = { temp_comp.measure_point_x, temp_comp.measure_point_y };
if (do_bed_cal || do_probe_cal) {
// Ensure park position is reachable
if (!position_is_reachable(temp_comp.park_point_x, temp_comp.park_point_y)
|| !(WITHIN(temp_comp.park_point_z, Z_MIN_POS - 0.001f, Z_MAX_POS + 0.001f))
) {
SERIAL_ECHOLNPGM("!Park position unreachable - aborting.");
return;
bool reachable = position_is_reachable(parkpos) || WITHIN(parkpos.z, Z_MIN_POS - fslop, Z_MAX_POS + fslop);
if (!reachable)
SERIAL_ECHOLNPGM("!Park");
else {
// Ensure probe position is reachable
reachable = probe.can_reach(ppos);
if (!reachable) SERIAL_ECHOLNPGM("!Probe");
}
// Ensure probe position is reachable
destination.set(
temp_comp.measure_point_x - probe.offset_xy.x,
temp_comp.measure_point_y - probe.offset_xy.y
);
if (!probe.can_reach(destination)) {
SERIAL_ECHOLNPGM("!Probe position unreachable - aborting.");
if (!reachable) {
SERIAL_ECHOLNPGM(" position unreachable - aborting.");
return;
}
process_subcommands_now_P(PSTR("G28"));
}
remember_feedrate_scaling_off();
// Nozzle position based on probe position
const xy_pos_t noz_pos = ppos - probe.offset_xy;
/******************************************
* Calibrate bed temperature offsets
******************************************/
// Report temperatures every second and handle heating timeouts
millis_t next_temp_report = millis() + 1000;
if (do_bed_cal) {
uint16_t target_bed = temp_comp.cali_info_init[TSI_BED].start_temp,
target_probe = temp_comp.bed_calib_probe_temp;
SERIAL_ECHOLNPGM("Waiting for cooling.");
while (thermalManager.degBed() > target_bed || thermalManager.degProbe() > target_probe) {
idle_no_sleep();
const millis_t ms = millis();
if (ELAPSED(ms, next_temp_report)) {
thermalManager.print_heater_states(active_extruder);
next_temp_report = ms + 1000;
}
}
while (thermalManager.degBed() > target_bed || thermalManager.degProbe() > target_probe)
report_temps(next_temp_report);
// Disable leveling so it won't mess with us
#if HAS_LEVELING
set_bed_leveling_enabled(false);
#endif
bool timeout = false;
for (;;) {
thermalManager.setTargetBed(target_bed);
SERIAL_ECHOLNPAIR("Target Bed:", target_bed, " Probe:", target_probe);
// Park nozzle
do_blocking_move_to(temp_comp.park_point_x, temp_comp.park_point_y, temp_comp.park_point_z);
do_blocking_move_to(parkpos);
// Wait for heatbed to reach target temp and probe to cool below target temp
SERIAL_ECHOLNPGM("Waiting for bed / probe to reach target.");
const millis_t probe_timeout_ms = millis() + 900UL * 1000UL;
while (fabs(thermalManager.degBed() - float(target_bed)) > 0.1 || thermalManager.degProbe() > target_probe) {
idle_no_sleep();
const millis_t ms = millis();
if (ELAPSED(ms, next_temp_report)) {
thermalManager.print_heater_states(active_extruder);
next_temp_report = ms + 1000;
}
if (ELAPSED(ms, probe_timeout_ms)) {
SERIAL_ECHOLNPGM("!Bed heating timeout.");
timeout = true;
break;
}
if (wait_for_temps(target_bed, target_probe, next_temp_report, millis() + 900UL * 1000UL)) {
SERIAL_ECHOLNPGM("!Bed heating timeout.");
break;
}
if (timeout) break;
// Move the nozzle to the probing point and wait for the probe to reach target temp
destination.set(temp_comp.measure_point_x, temp_comp.measure_point_y);
do_blocking_move_to(destination);
do_blocking_move_to_xy(noz_pos);
SERIAL_ECHOLNPGM("Waiting for probe heating.");
while (thermalManager.degProbe() < target_probe) {
idle_no_sleep();
const millis_t ms = millis();
if (ELAPSED(ms, next_temp_report)) {
thermalManager.print_heater_states(active_extruder);
next_temp_report = ms + 1000;
}
}
// Raise nozzle before probing
destination.z = 5.0;
do_blocking_move_to_z(destination.z);
while (thermalManager.degProbe() < target_probe)
report_temps(next_temp_report);
// Do a single probe at the current position
remember_feedrate_scaling_off();
const xy_pos_t probe_xy = destination + probe.offset_xy;
const float measured_z = probe.probe_at_point(probe_xy, PROBE_PT_NONE);
restore_feedrate_and_scaling();
if (isnan(measured_z)) {
SERIAL_ECHOLNPGM("!Received NAN. Aborting.");
break;
}
else
SERIAL_ECHOLNPAIR_F("Measured: ", measured_z);
const float measured_z = g76_probe(noz_pos);
if (isnan(measured_z)) break;
if (target_bed == temp_comp.cali_info_init[TSI_BED].start_temp)
temp_comp.prepare_new_calibration(measured_z);
@ -233,7 +225,7 @@ void GcodeSuite::G76() {
if (do_probe_cal) {
// Park nozzle
do_blocking_move_to(temp_comp.park_point_x, temp_comp.park_point_y, temp_comp.park_point_z);
do_blocking_move_to(parkpos);
// Initialize temperatures
const uint16_t target_bed = temp_comp.probe_calib_bed_temp;
@ -241,17 +233,8 @@ void GcodeSuite::G76() {
uint16_t target_probe = temp_comp.cali_info_init[TSI_PROBE].start_temp;
SERIAL_ECHOLNPGM("Waiting for bed and probe temperature.");
while (fabs(thermalManager.degBed() - float(target_bed)) > 0.1f
|| thermalManager.degProbe() > target_probe
) {
idle_no_sleep();
const millis_t ms = millis();
if (ELAPSED(ms, next_temp_report)) {
thermalManager.print_heater_states(active_extruder);
next_temp_report = ms + 1000;
}
}
// Wait for heatbed to reach target temp and probe to cool below target temp
wait_for_temps(target_bed, target_probe, next_temp_report);
// Disable leveling so it won't mess with us
#if HAS_LEVELING
@ -261,44 +244,21 @@ void GcodeSuite::G76() {
bool timeout = false;
for (;;) {
// Move probe to probing point and wait for it to reach target temperature
destination.set(temp_comp.measure_point_x, temp_comp.measure_point_y);
do_blocking_move_to(destination);
do_blocking_move_to_xy(noz_pos);
SERIAL_ECHOLNPAIR("Waiting for probe heating. Bed:", target_bed, " Probe:", target_probe);
const millis_t probe_timeout_ms = millis() + 900UL * 1000UL;
while (thermalManager.degProbe() < target_probe) {
idle_no_sleep();
const millis_t ms = millis();
if (ELAPSED(ms, next_temp_report)) {
thermalManager.print_heater_states(active_extruder);
next_temp_report = ms + 1000;
}
if (ELAPSED(ms, probe_timeout_ms)) {
if (report_temps(next_temp_report, probe_timeout_ms)) {
SERIAL_ECHOLNPGM("!Probe heating timed out.");
timeout = true;
break;
}
}
if (timeout) break;
// Raise nozzle before probing
destination.z = 5.0;
do_blocking_move_to_z(destination.z);
// Do a single probe
remember_feedrate_scaling_off();
const xy_pos_t probe_xy = destination + probe.offset_xy;
const float measured_z = probe.probe_at_point(probe_xy, PROBE_PT_NONE);
restore_feedrate_and_scaling();
if (isnan(measured_z)) {
SERIAL_ECHOLNPGM("!Received NAN measurement - aborting.");
break;
}
else
SERIAL_ECHOLNPAIR_F("Measured: ", measured_z);
const float measured_z = g76_probe(noz_pos);
if (isnan(measured_z)) break;
if (target_probe == temp_comp.cali_info_init[TSI_PROBE].start_temp)
temp_comp.prepare_new_calibration(measured_z);
@ -325,6 +285,8 @@ void GcodeSuite::G76() {
SERIAL_ECHOLNPGM("Final compensation values:");
temp_comp.print_offsets();
} // do_probe_cal
restore_feedrate_and_scaling();
}
/**

Write Preview
Loading…
Cancel
Save