diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e5cfce17fe..dfdd17e4ee 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index e5cfce17fe..dfdd17e4ee 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 12c1b23906..9cc0a4d5ab 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 443eeaf0fa..dc255f7a4c 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 356ed9f073..276cd91e47 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index e5cfce17fe..dfdd17e4ee 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 4aecdea878..a76fa7d5e8 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index 774e67d2fc..d2b924df97 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 3643b6ab56..d5edc5950a 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 6b7b69902d..077bdbe10b 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1695,9 +1695,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 3643b6ab56..d5edc5950a 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 19a80bb4a4..9b2786c4cb 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 7af704a38c..982092684f 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1690,9 +1690,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index f123b815de..2627c5a143 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index 250794c834..c2347371e4 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 7dd0581341..f335cf870c 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index fa998f4159..719f0cd582 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index 86632e7ebd..3e8a9ada3e 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 7dd0581341..f335cf870c 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 6ec3b3a753..42d40669e0 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 4eb60eaf2f..39ceb6cbe4 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1695,10 +1695,11 @@ //#define MAX7219_DIN_PIN P2_13 // for RAMPS E1 on Re-ARM E1_DIR_PIN P2_13 //#define MAX7219_LOAD_PIN P2_08 // for RAMPS E1 on Re-ARM E1_STEP_PIN P2_08 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - + #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 0987cb1369..14358c2ccb 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 305ac1a34d..6f4346c035 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 1df8c77d8e..659cd120ee 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 47068caef2..8b1f8818f4 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index 16e734c53e..cafe64bfbe 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 07f0085b05..c1cb035af7 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index c71a951964..4378d1828b 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1695,9 +1695,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 5d12ba5e67..769d05aa8b 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 3bfce8a965..470770bc02 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 4e34989a55..b3175b35e5 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 3a426190a8..dfcd373c0e 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -1688,9 +1688,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 909f36e277..9076b2ad4b 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index 8a9ac8143a..32b1100e42 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index de46ed4735..2d979888a7 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 7a949f34a9..f28511c10d 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1690,9 +1690,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 2eb4220023..a3f5885846 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=18 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 71efacb1d8..9b5699c308 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1689,9 +1689,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 16c039a440..48ee2e7228 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1689,9 +1689,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 2cec1bb363..443db29a21 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1689,9 +1689,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 2cec1bb363..443db29a21 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1689,9 +1689,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 2cec1bb363..443db29a21 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1689,9 +1689,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index ad48574054..e5f73f1f93 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1694,9 +1694,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 4dd11bb552..4e5b8af3a2 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1689,9 +1689,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index be775a351c..0ad494097e 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 180 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 7a45fabad4..ffba692b3f 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index da867c5fa6..da3fbb65b7 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1687,9 +1687,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index ad4861a063..3c60e96ae4 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1688,10 +1688,11 @@ #define MAX7219_DIN_PIN 57 #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=18 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! diff --git a/Marlin/src/feature/Max7219_Debug_LEDs.cpp b/Marlin/src/feature/Max7219_Debug_LEDs.cpp index dd4f4bf47e..bb0802bc78 100644 --- a/Marlin/src/feature/Max7219_Debug_LEDs.cpp +++ b/Marlin/src/feature/Max7219_Debug_LEDs.cpp @@ -48,39 +48,11 @@ #include "../Marlin.h" #include "../HAL/Delay.h" -static uint8_t LEDs[8] = { 0 }; +uint8_t LEDs[8 * (MAX7219_NUMBER_UNITS)] = { 0 }; #ifndef MAX7219_ROTATE #define MAX7219_ROTATE 0 #endif -#define _ROT ((MAX7219_ROTATE + 360) % 360) -#if _ROT == 0 - #define _ROW_ y - #define _COL_ x - #define XOR_7219(x, y) LEDs[y] ^= _BV(7 - x) - #define BIT_7219(x, y) TEST(LEDs[y], 7 - x) - #define SEND_7219(R,V) Max7219(max7219_reg_digit0 + R, V) -#elif _ROT == 90 - #define _ROW_ x - #define _COL_ y - #define XOR_7219(x, y) LEDs[x] ^= _BV(y) - #define BIT_7219(x, y) TEST(LEDs[x], y) - #define SEND_7219(R,V) Max7219(max7219_reg_digit0 + R, V) -#elif _ROT == 180 - #define _ROW_ y - #define _COL_ x - #define XOR_7219(x, y) LEDs[y] ^= _BV(x) - #define BIT_7219(x, y) TEST(LEDs[y], x) - #define SEND_7219(R,V) Max7219(max7219_reg_digit7 - R, V) -#elif _ROT == 270 - #define _ROW_ x - #define _COL_ y - #define XOR_7219(x, y) LEDs[x] ^= _BV(7 - y) - #define BIT_7219(x, y) TEST(LEDs[x], 7 - y) - #define SEND_7219(R,V) Max7219(max7219_reg_digit7 - R, V) -#else - #error "MAX7219_ROTATE must be a multiple of +/- 90°." -#endif #ifdef CPU_32_BIT // Approximate a 1µs delay on 32-bit ARM @@ -108,25 +80,24 @@ void Max7219_PutByte(uint8_t data) { CRITICAL_SECTION_END; #endif } +void Max7219_pulse_load() { + SIG_DELAY(); + WRITE(MAX7219_LOAD_PIN, LOW); // tell the chip to load the data + SIG_DELAY(); + WRITE(MAX7219_LOAD_PIN, HIGH); + SIG_DELAY(); +} void Max7219(const uint8_t reg, const uint8_t data) { SIG_DELAY(); #ifndef CPU_32_BIT CRITICAL_SECTION_START; #endif - WRITE(MAX7219_LOAD_PIN, LOW); // begin SIG_DELAY(); Max7219_PutByte(reg); // specify register SIG_DELAY(); Max7219_PutByte(data); // put data - SIG_DELAY(); - WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data - SIG_DELAY(); - WRITE(MAX7219_LOAD_PIN, HIGH); - #ifndef CPU_32_BIT CRITICAL_SECTION_END; - #endif - SIG_DELAY(); } #if ENABLED(MAX7219_NUMERIC) @@ -145,6 +116,7 @@ void Max7219(const uint8_t reg, const uint8_t data) { max7219_reg_digit0 + start + size, minus ? led_minus : blank ? 0x00 : led_numeral[value % 10] | (dec ? led_decimal : 0x00) ); + Max7219_pulse_load(); // tell the chips to load the clocked out data value /= 10; if (!value && !leadzero) blank = true; dec = false; @@ -176,125 +148,213 @@ inline void Max7219_Error(const char * const func, const int32_t v1, const int32 #endif } -inline uint8_t flipped(const uint8_t bits) { - uint8_t outbits = 0; - for (uint8_t b = 0; b < 8; b++) - if (bits & _BV(b)) outbits |= _BV(7 - b); +/** + * uint32_t flipped(const uint32_t bits, const uint8_t n_bytes) operates on the number + * of bytes specified in n_bytes. The lower order bits of the supplied bits are flipped. + * flipped( x, 1) flips the low 8 bits of x. + * flipped( x, 2) flips the low 16 bits of x. + * flipped( x, 3) flips the low 24 bits of x. + * flipped( x, 4) flips the low 32 bits of x. + */ + +inline uint32_t flipped(const uint32_t bits, const uint8_t n_bytes) { + uint32_t mask = 1, outbits = 0; + for (uint8_t b = 0; b < n_bytes * 8; b++) { + outbits = (outbits << 1); + if (bits & mask) + outbits |= 1; + mask = mask << 1; + } return outbits; } // Modify a single LED bit and send the changed line void Max7219_LED_Set(const uint8_t x, const uint8_t y, const bool on) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Set"), x, y); + if (x > (MAX7219_X_LEDS - 1) || y > (MAX7219_Y_LEDS - 1)) return Max7219_Error(PSTR("Max7219_LED_Set"), x, y); if (BIT_7219(x, y) == on) return; XOR_7219(x, y); - SEND_7219(_ROW_, LEDs[_ROW_]); + SEND_7219(MAX7219_UPDATE_AXIS); } void Max7219_LED_On(const uint8_t x, const uint8_t y) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_On"), x, y); + if (x > (MAX7219_X_LEDS - 1) || y > (MAX7219_Y_LEDS - 1)) return Max7219_Error(PSTR("Max7219_LED_On"), x, y); Max7219_LED_Set(x, y, true); } void Max7219_LED_Off(const uint8_t x, const uint8_t y) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Off"), x, y); + if (x > (MAX7219_X_LEDS - 1) || y > (MAX7219_Y_LEDS - 1)) return Max7219_Error(PSTR("Max7219_LED_Off"), x, y); Max7219_LED_Set(x, y, false); } void Max7219_LED_Toggle(const uint8_t x, const uint8_t y) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Toggle"), x, y); + if (x > (MAX7219_X_LEDS - 1) || y > (MAX7219_Y_LEDS - 1)) return Max7219_Error(PSTR("Max7219_LED_Toggle"), x, y); Max7219_LED_Set(x, y, !BIT_7219(x, y)); } -inline void _Max7219_Set_Reg(const uint8_t reg, const uint8_t val) { - LEDs[reg] = val; - SEND_7219(reg, val); +inline void _Max7219_Set_Digit_Segments(const uint8_t digit, const uint8_t val) { + LEDs[digit] = val; + SEND_7219(digit); } -void Max7219_Set_Row(const uint8_t _ROW_, const uint8_t val) { - if (_ROW_ > 7) return Max7219_Error(PSTR("Max7219_Set_Row"), _ROW_); - #if _ROT == 90 - for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Set(7 - _COL_, _ROW_, TEST(val, _COL_)); - #elif _ROT == 180 - _Max7219_Set_Reg(_ROW_, flipped(val)); - #elif _ROT == 270 - for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _COL_)); +/** + * void Max7219_Set_Row( const uint8_t col, const uint32_t val) plots the low order bits of + * val to the specified row of the Max7219 matrix. With 4 Max7219 units in the chain, it + * is possible to display an entire 32-bit number with one call to the function (if appropriately + * orientated). + */ +void Max7219_Set_Row(const uint8_t row, const uint32_t val) { + if (row >= MAX7219_Y_LEDS) return Max7219_Error(PSTR("Max7219_Set_Row"), row); + uint32_t mask = 0x0000001; + for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) { + if (val & mask) + SET_PIXEL_7219((MAX7219_X_LEDS-1-x), row); + else + CLEAR_PIXEL_7219((MAX7219_X_LEDS-1-x), row); + mask = mask << 1; + } + + #if _ROT == 90 || _ROT == 270 + for (uint8_t x = 0; x < 8; x++) + SEND_7219(x); // force all columns out to the Max7219 chips and strobe them #else - _Max7219_Set_Reg(_ROW_, val); + SEND_7219(row); // force the single column out to the Max7219 chips and strobe them #endif } -void Max7219_Clear_Row(const uint8_t _ROW_) { - if (_ROW_ > 7) return Max7219_Error(PSTR("Max7219_Clear_Row"), _ROW_); +void Max7219_Clear_Row(const uint8_t row) { + if (row > 7) return Max7219_Error(PSTR("Max7219_Clear_Row"), row); #if _ROT == 90 || _ROT == 270 - for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Off(_COL_, _ROW_); + for (uint8_t col = 0; col < 8; col++) Max7219_LED_Off(col, row); #else - _Max7219_Set_Reg(_ROW_, 0); + _Max7219_Set_Digit_Segments(row, 0); #endif } -void Max7219_Set_Column(const uint8_t _COL_, const uint8_t val) { - if (_COL_ > 7) return Max7219_Error(PSTR("Max7219_Set_Column"), _COL_); - #if _ROT == 90 - _Max7219_Set_Reg(_COL_, val); - #elif _ROT == 180 - for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _ROW_)); - #elif _ROT == 270 - _Max7219_Set_Reg(_COL_, flipped(val)); +/** + * void Max7219_Set_Column( const uint8_t col, const uint32_t val) plots the low order bits of + * val to the specified column of the Max7219 matrix. With 4 Max7219 units in the chain, it + * is possible to display an entire 32-bit number with one call to the function (if appropriately + * orientated). + */ +void Max7219_Set_Column(const uint8_t col, const uint32_t val) { + if (col >= MAX7219_X_LEDS) return Max7219_Error(PSTR("Max7219_Set_Column"), col); + uint32_t mask = 0x0000001; + for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) { + if (val & mask) + SET_PIXEL_7219(col, MAX7219_Y_LEDS-1-y); + else + CLEAR_PIXEL_7219(col, MAX7219_Y_LEDS-1-y); + mask = mask << 1; + } + #if _ROT == 90 || _ROT == 270 + SEND_7219(col); // force the column out to the Max7219 chips and strobe them #else - for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _ROW_)); + for (uint8_t yy = 0; yy < 8; yy++) + SEND_7219(yy); // force all columns out to the Max7219 chips and strobe them #endif } -void Max7219_Clear_Column(const uint8_t _COL_) { - if (_COL_ > 7) return Max7219_Error(PSTR("Max7219_Clear_Column"), _COL_); +void Max7219_Clear_Column(const uint8_t col) { + if (col >= MAX7219_X_LEDS) return Max7219_Error(PSTR("Max7219_Clear_Column"), col); + + for (uint8_t yy = 0; yy < MAX7219_Y_LEDS; yy++) + CLEAR_PIXEL_7219(col, yy); + #if _ROT == 90 || _ROT == 270 - _Max7219_Set_Reg(_COL_, 0); + SEND_7219(col); // force the column out to the Max7219 chips and strobe them #else - for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Off(_COL_, _ROW_); + for (uint8_t y = 0; y < 8; y++) + SEND_7219(y); // force all columns out to the Max7219 chips and strobe them #endif } void Max7219_Clear() { - for (uint8_t r = 0; r < 8; r++) _Max7219_Set_Reg(r, 0); + for (uint8_t i = 0; i <= 7; i++) { // Clear LED bitmap + for (uint8_t j = 0; j < MAX7219_NUMBER_UNITS; j++) + LEDs[i + j * 8] = 0x00; + SEND_7219(i); + } + } -void Max7219_Set_2_Rows(const uint8_t y, uint16_t val) { - if (y > 6) return Max7219_Error(PSTR("Max7219_Set_2_Rows"), y, val); - Max7219_Set_Row(y + 0, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 1, val & 0xFF); +void Max7219_Set_Rows_16bits(const uint8_t y, uint32_t val) { + #if MAX7219_X_LEDS == 8 + if (y > MAX7219_Y_LEDS - 2) return Max7219_Error(PSTR("Max7219_Set_Rows_16bits"), y, val); + Max7219_Set_Row(y + 1, val); val >>= 8; + Max7219_Set_Row(y + 0, val); + #else // at least 16 bits on each row + if (y > MAX7219_Y_LEDS - 1) return Max7219_Error(PSTR("Max7219_Set_Rows_16bits"), y, val); + Max7219_Set_Row(y, val); + #endif } -void Max7219_Set_4_Rows(const uint8_t y, uint32_t val) { - if (y > 4) return Max7219_Error(PSTR("Max7219_Set_4_Rows"), y, val); - Max7219_Set_Row(y + 0, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 1, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 2, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 3, val & 0xFF); +void Max7219_Set_Rows_32bits(const uint8_t y, uint32_t val) { + #if MAX7219_X_LEDS == 8 + if (y > MAX7219_Y_LEDS - 4) return Max7219_Error(PSTR("Max7219_Set_Rows_32bits"), y, val); + Max7219_Set_Row(y + 3, val); val >>= 8; + Max7219_Set_Row(y + 2, val); val >>= 8; + Max7219_Set_Row(y + 1, val); val >>= 8; + Max7219_Set_Row(y + 0, val); + #elif MAX7219_X_LEDS == 16 + if (y > MAX7219_Y_LEDS - 2) return Max7219_Error(PSTR("Max7219_Set_Rows_32bits"), y, val); + Max7219_Set_Row(y + 1, val); val >>= 16; + Max7219_Set_Row(y + 0, val); + #else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits + if (y > MAX7219_Y_LEDS - 1) return Max7219_Error(PSTR("Max7219_Set_Rows_32bits"), y, val); + Max7219_Set_Row(y, val); + #endif } -void Max7219_Set_2_Columns(const uint8_t x, uint16_t val) { - if (x > 6) return Max7219_Error(PSTR("Max7219_Set_2_Columns"), x, val); - Max7219_Set_Column(x + 0, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 1, val & 0xFF); +void Max7219_Set_Columns_16bits(const uint8_t x, uint32_t val) { + #if MAX7219_Y_LEDS == 8 + if (x > MAX7219_X_LEDS - 2) return Max7219_Error(PSTR("Max7219_Set_Columns_16bits"), x, val); + Max7219_Set_Column(x + 0, val); val >>= 8; + Max7219_Set_Column(x + 1, val); + #else // at least 16 bits in each column + if (x > MAX7219_X_LEDS - 1) return Max7219_Error(PSTR("Max7219_Set_Columns_16bits"), x, val); + Max7219_Set_Column(x, val); + #endif } -void Max7219_Set_4_Columns(const uint8_t x, uint32_t val) { - if (x > 4) return Max7219_Error(PSTR("Max7219_Set_4_Columns"), x, val); - Max7219_Set_Column(x + 0, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 1, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 2, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 3, val & 0xFF); +void Max7219_Set_Columns_32bits(const uint8_t x, uint32_t val) { + #if MAX7219_Y_LEDS == 8 + if (x > MAX7219_X_LEDS - 4) return Max7219_Error(PSTR("Max7219_Set_Rows_32bits"), x, val); + Max7219_Set_Column(x + 3, val); val >>= 8; + Max7219_Set_Column(x + 2, val); val >>= 8; + Max7219_Set_Column(x + 1, val); val >>= 8; + Max7219_Set_Column(x + 0, val); + #elif MAX7219_Y_LEDS == 16 + if (x > MAX7219_X_LEDS - 2) return Max7219_Error(PSTR("Max7219_Set_Rows_32bits"), x, val); + Max7219_Set_Column(x + 1, val); val >>= 16; + Max7219_Set_Column(x + 0, val); + #else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits + if (x > MAX7219_X_LEDS - 1) return Max7219_Error(PSTR("Max7219_Set_Rows_32bits"), x, val); + Max7219_Set_Column(x, val); + #endif } void Max7219_register_setup() { // Initialize the Max7219 - Max7219(max7219_reg_scanLimit, 0x07); - Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) - Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode - Max7219(max7219_reg_displayTest, 0x00); // no display test - Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + Max7219(max7219_reg_scanLimit, 0x07); + Max7219_pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) + Max7219_pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode + Max7219_pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + Max7219(max7219_reg_displayTest, 0x00); // no display test + Max7219_pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set // range: 0x00 to 0x0F + Max7219_pulse_load(); // tell the chips to load the clocked out data } #ifdef MAX7219_INIT_TEST @@ -303,24 +363,21 @@ void Max7219_register_setup() { inline void Max7219_spiral(const bool on, const uint16_t del) { constexpr int8_t way[] = { 1, 0, 0, 1, -1, 0, 0, -1 }; int8_t px = 0, py = 0, dir = 0; - for (uint8_t i = 64; i--;) { + for (uint8_t i = MAX7219_X_LEDS * MAX7219_Y_LEDS; i--;) { Max7219_LED_Set(px, py, on); delay(del); const int8_t x = px + way[dir], y = py + way[dir + 1]; - if (!WITHIN(x, 0, 7) || !WITHIN(y, 0, 7) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7; + if (!WITHIN(x, 0, MAX7219_X_LEDS-1) || !WITHIN(y, 0, MAX7219_Y_LEDS-1) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7; px += way[dir]; py += way[dir + 1]; } } #else - inline void Max7219_colset(const uint8_t x, const bool on) { - for (uint8_t y = 0; y <= 7; y++) Max7219_LED_Set(x, y, on); - } inline void Max7219_sweep(const int8_t dir, const uint16_t ms, const bool on) { - uint8_t x = dir > 0 ? 0 : 7; - for (uint8_t i = 8; i--; x += dir) { - Max7219_Set_Column(x, on ? 0xFF : 0x00); + uint8_t x = dir > 0 ? 0 : MAX7219_X_LEDS-1; + for (uint8_t i = MAX7219_X_LEDS; i--; x += dir) { + Max7219_Set_Column(x, on ? 0xFFFFFFFF : 0x00000000); delay(ms); } } @@ -339,6 +396,7 @@ void Max7219_init() { for (uint8_t i = 0; i <= 7; i++) { // Empty registers to turn all LEDs off LEDs[i] = 0x00; Max7219(max7219_reg_digit0 + i, 0); + Max7219_pulse_load(); // tell the chips to load the clocked out data } #ifdef MAX7219_INIT_TEST @@ -366,22 +424,38 @@ void Max7219_init() { // Apply changes to update a marker inline void Max7219_Mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) { - Max7219_LED_Off(v1 & 0x7, y + (v1 >= 8)); - Max7219_LED_On(v2 & 0x7, y + (v2 >= 8)); + #if MAX7219_X_LEDS == 8 + Max7219_LED_Off(v1 & 0x7, y + (v1 >= 8)); + Max7219_LED_On(v2 & 0x7, y + (v2 >= 8)); + #else // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + Max7219_LED_Off(v1 & 0xF, y); + Max7219_LED_On(v2 & 0xF, y); + #endif } // Apply changes to update a tail-to-head range inline void Max7219_Range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) { - if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) - Max7219_LED_Off(n & 0x7, y + (n >= 8)); - if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) - Max7219_LED_On(n & 0x7, y + (n >= 8)); + #if MAX7219_X_LEDS == 8 + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + Max7219_LED_Off(n & 0x7, y + (n >= 8)); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + Max7219_LED_On(n & 0x7, y + (n >= 8)); + #else // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + Max7219_LED_Off(n & 0xF, y); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + Max7219_LED_On(n & 0xF, y); + #endif } // Apply changes to update a quantity inline void Max7219_Quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) { for (uint8_t i = MIN(nv, ov); i < MAX(nv, ov); i++) - Max7219_LED_Set(i >> 1, y + (i & 1), nv >= ov); + #if MAX7219_X_LEDS == 8 + Max7219_LED_Set(i >> 1, y + (i & 1), nv >= ov); // single 8x8 LED matrix. Use two lines to get 16 LED's + #else + Max7219_LED_Set(i, y, nv >= ov); // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + #endif } void Max7219_idle_tasks() { @@ -424,7 +498,7 @@ void Max7219_idle_tasks() { #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE) if (do_blink) { - Max7219_LED_Toggle(7, 7); + Max7219_LED_Toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1); next_blink = ms + 1000; } #endif diff --git a/Marlin/src/feature/Max7219_Debug_LEDs.h b/Marlin/src/feature/Max7219_Debug_LEDs.h index f00f231749..3c4498b664 100644 --- a/Marlin/src/feature/Max7219_Debug_LEDs.h +++ b/Marlin/src/feature/Max7219_Debug_LEDs.h @@ -33,6 +33,12 @@ * * Max7219_init() is called automatically at startup, and then there are a number of * support functions available to control the LEDs in the 8x8 grid. + * + * If you are using the Max7219 matrix for firmware debug purposes in time sensitive + * areas of the code, please be aware that the orientation (rotation) of the display can + * affect the speed. The Max7219 can update a single column fairly fast. It is much + * faster to do a Max7219_Set_Column() with a rotation of 90 or 270 degrees than to do + * a Max7219_Set_Row(). The opposite is true for rotations of 0 or 180 degrees. */ #ifndef __MAX7219_DEBUG_LEDS_H__ @@ -59,6 +65,7 @@ void Max7219_init(); void Max7219_PutByte(uint8_t data); +void Max7219_pulse_load(); // Set a single register (e.g., a whole native row) void Max7219(const uint8_t reg, const uint8_t data); @@ -69,18 +76,72 @@ void Max7219_LED_On(const uint8_t x, const uint8_t y); void Max7219_LED_Off(const uint8_t x, const uint8_t y); void Max7219_LED_Toggle(const uint8_t x, const uint8_t y); -// Set all 8 LEDs in a single column -void Max7219_Set_Column(const uint8_t col, const uint8_t val); +// Set all LEDs in a single column +void Max7219_Set_Column(const uint8_t col, const uint32_t val); void Max7219_Clear_Column(const uint8_t col); -// Set all 8 LEDs in a single row -void Max7219_Set_Row(const uint8_t row, const uint8_t val); +// Set all LEDs in a single row +void Max7219_Set_Row(const uint8_t row, const uint32_t val); void Max7219_Clear_Row(const uint8_t row); +// 16 and 32 bit versions of Row and Column functions +// Multiple rows and columns will be used to display the value if +// the array of matrix LED's is too narrow to accomplish the goal +void Max7219_Set_Rows_16bits(const uint8_t y, uint32_t val); +void Max7219_Set_Rows_32bits(const uint8_t y, uint32_t val); +void Max7219_Set_Columns_16bits(const uint8_t x, uint32_t val); +void Max7219_Set_Columns_32bits(const uint8_t x, uint32_t val); + // Quickly clear the whole matrix void Max7219_Clear(); // Apply custom code to update the matrix void Max7219_idle_tasks(); +#ifndef MAX7219_ROTATE + #define MAX7219_ROTATE 0 +#endif +#define _ROT ((MAX7219_ROTATE + 360) % 360) +#if _ROT == 0 + #define MAX7219_UPDATE_AXIS y // Fast line update axis for this orientation of the matrix display + #define MAX7219_Y_LEDS 8 + #define MAX7219_X_LEDS (MAX7219_Y_LEDS * (MAX7219_NUMBER_UNITS)) + #define XOR_7219(x, y) LEDs[(x & 0xF8) + y] ^= _BV(7 - (x & 0x07)) + #define SET_PIXEL_7219(x, y) LEDs[(x & 0xF8) + y] |= _BV(7 - (x & 0x07)) + #define CLEAR_PIXEL_7219(x, y) LEDs[(x & 0xF8) + y] &= (_BV(7 - (x & 0x07)) ^ 0xFF) + #define BIT_7219(x, y) TEST(LEDs[(x & 0xF8) + y], 7 - (x & 0x07)) + #define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit0 + (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0); +#elif _ROT == 90 + #define MAX7219_UPDATE_AXIS x // Fast line update axis for this orientation of the matrix display + #define MAX7219_X_LEDS 8 + #define MAX7219_Y_LEDS (MAX7219_X_LEDS * (MAX7219_NUMBER_UNITS)) + #define XOR_7219(x, y) LEDs[x + ((MAX7219_Y_LEDS - 1 - y) & 0xF8)] ^= _BV((y & 0x7)) + #define SET_PIXEL_7219(x, y) LEDs[x + ((MAX7219_Y_LEDS - 1 - y) & 0xF8)] |= _BV((y & 0x7)) + #define CLEAR_PIXEL_7219(x, y) LEDs[x + ((MAX7219_Y_LEDS - 1 - y) & 0xF8)] &= (_BV((y & 0x7)) ^ 0xFF) + #define BIT_7219(x, y) TEST(LEDs[x + ((MAX7219_Y_LEDS - 1 - y) & 0xF8)], (y & 0x7)) + #define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit0 + (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0); +#elif _ROT == 180 + #define MAX7219_UPDATE_AXIS y // Fast line update axis for this orientation of the matrix display + #define MAX7219_Y_LEDS 8 + #define MAX7219_X_LEDS (MAX7219_Y_LEDS * (MAX7219_NUMBER_UNITS)) + #define XOR_7219(x, y) LEDs[y + (MAX7219_X_LEDS - 1 - (x)) & 0xF8] ^= _BV((x & 0x07)) + #define SET_PIXEL_7219(x, y) LEDs[y + (MAX7219_X_LEDS - 1 - (x)) & 0xF8] |= _BV((x & 0x07)) + #define CLEAR_PIXEL_7219(x, y) LEDs[y + (MAX7219_X_LEDS - 1 - (x)) & 0xF8] &= (_BV((x & 0x07)) ^ 0xFF) + #define BIT_7219(x, y) TEST(LEDs[y + (MAX7219_X_LEDS - 1 - (x)) & 0xF8], ((x & 0x07))) + #define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit7 - (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0); +#elif _ROT == 270 + #define MAX7219_UPDATE_AXIS x // Fast line update axis for this orientation of the matrix display + #define MAX7219_X_LEDS 8 + #define MAX7219_Y_LEDS (MAX7219_X_LEDS * (MAX7219_NUMBER_UNITS)) + #define XOR_7219(x, y) LEDs[x + (y & 0xF8] ^= _BV(7 - (y & 0x7)) + #define SET_PIXEL_7219(x, y) LEDs[x + (y & 0xF8] |= _BV(7 - (y & 0x7)) + #define CLEAR_PIXEL_7219(x, y) LEDs[x + (y & 0xF8] &= (_BV(7 - (y & 0x7)) ^ 0xFF) + #define BIT_7219(x, y) TEST(LEDs[x + (y & 0xF8)], 7 - (y & 0x7)) + #define SEND_7219(R) do {for(int8_t jj = 0; jj < MAX7219_NUMBER_UNITS; jj++) Max7219(max7219_reg_digit7 - (R & 0x7), LEDs[(R & 0x7) + jj * 8]); Max7219_pulse_load(); } while (0); +#else + #error "MAX7219_ROTATE must be a multiple of +/- 90°." +#endif + +extern uint8_t LEDs[8*MAX7219_NUMBER_UNITS]; + #endif // __MAX7219_DEBUG_LEDS_H__ diff --git a/Marlin/src/gcode/feature/leds/M7219.cpp b/Marlin/src/gcode/feature/leds/M7219.cpp index 8aaa3ea4bd..7c6b8de960 100644 --- a/Marlin/src/gcode/feature/leds/M7219.cpp +++ b/Marlin/src/gcode/feature/leds/M7219.cpp @@ -31,30 +31,51 @@ * M7219: Control the Max7219 LED matrix * * I - Initialize (clear) the matrix + * F - Fill the matrix (set all bits) + * P - Dump the LEDs[] array values * C - Set a column to the 8-bit value V * R - Set a row to the 8-bit value V * X - X position of an LED to set or toggle * Y - Y position of an LED to set or toggle - * V - The 8-bit value or on/off state to set + * V - The potentially 32-bit value or on/off state to set + * (for example: a chain of 4 Max7219 devices can have 32 bit + * rows or columns depending upon rotation) */ void GcodeSuite::M7219() { if (parser.seen('I')) Max7219_Clear(); - else if (parser.seenval('R')) { - const uint8_t r = parser.value_int(); - Max7219_Set_Row(r, parser.byteval('V')); + + if (parser.seen('F')) + for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) + Max7219_Set_Column(x, 0xFFFFFFFF); + + if (parser.seenval('R')) { + const uint32_t r = parser.value_int(); + Max7219_Set_Row(r, parser.ulongval('V')); + return; } else if (parser.seenval('C')) { - const uint8_t c = parser.value_int(); - Max7219_Set_Column(c, parser.byteval('V')); + const uint32_t c = parser.value_int(); + Max7219_Set_Column(c, parser.ulongval('V')); + return; } - else if (parser.seenval('X') || parser.seenval('Y')) { + + if (parser.seenval('X') || parser.seenval('Y')) { const uint8_t x = parser.byteval('X'), y = parser.byteval('Y'); if (parser.seenval('V')) Max7219_LED_Set(x, y, parser.boolval('V')); else Max7219_LED_Toggle(x, y); } + + if (parser.seen('P')) { + for (uint8_t x = 0; x < COUNT(LEDs); x++) { + SERIAL_ECHOPAIR("LEDs[", x); + SERIAL_ECHOPAIR("]=", LEDs[x]); + SERIAL_EOL(); + } + return; + } } #endif // MAX7219_GCODE