Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227)

.travis.yml

@@ -63,13 +63,13 @@ script:
   - opt_set TEMP_SENSOR_1 1
   - opt_set TEMP_SENSOR_BED 1
   - opt_set POWER_SUPPLY 1
-  - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS
+  - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
   - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
   - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
   - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
-  - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING ADVANCED_PAUSE_FEATURE
-  - opt_set ABL_GRID_POINTS_X 16
-  - opt_set ABL_GRID_POINTS_Y 16
+  - opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS
+  - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
+  - opt_set GRID_MAX_POINTS_X 16
   - opt_set_adv FANMUX0_PIN 53
   - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
   #
@@ -363,8 +363,7 @@ script:
   - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
   - opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
   - opt_set_adv I2C_SLAVE_ADDRESS 63
-  - opt_set ABL_GRID_POINTS_X 16
-  - opt_set ABL_GRID_POINTS_Y 16
+  - opt_set GRID_MAX_POINTS_X 16
   - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
   #
   # Test a Sled Z Probe with Linear leveling

Marlin/src/gcode/geometry/G53-G59.cpp

@@ -24,70 +24,71 @@
 #include "../../module/motion.h"
 
 #if ENABLED(CNC_COORDINATE_SYSTEMS)
-  #include "../../module/stepper.h"
 
-  /**
-   * Select a coordinate system and update the workspace offset.
-   * System index -1 is used to specify machine-native.
-   */
-  bool GcodeSuite::select_coordinate_system(const int8_t _new) {
-    if (active_coordinate_system == _new) return false;
-    stepper.synchronize();
-    float old_offset[XYZ] = { 0 }, new_offset[XYZ] = { 0 };
-    if (WITHIN(active_coordinate_system, 0, MAX_COORDINATE_SYSTEMS - 1))
-      COPY(old_offset, coordinate_system[active_coordinate_system]);
-    if (WITHIN(_new, 0, MAX_COORDINATE_SYSTEMS - 1))
-      COPY(new_offset, coordinate_system[_new]);
-    active_coordinate_system = _new;
-    LOOP_XYZ(i) {
-      const float diff = new_offset[i] - old_offset[i];
-      if (diff) {
-        position_shift[i] += diff;
-        update_software_endstops((AxisEnum)i);
-      }
+#include "../../module/stepper.h"
+
+/**
+ * Select a coordinate system and update the workspace offset.
+ * System index -1 is used to specify machine-native.
+ */
+bool GcodeSuite::select_coordinate_system(const int8_t _new) {
+  if (active_coordinate_system == _new) return false;
+  stepper.synchronize();
+  float old_offset[XYZ] = { 0 }, new_offset[XYZ] = { 0 };
+  if (WITHIN(active_coordinate_system, 0, MAX_COORDINATE_SYSTEMS - 1))
+    COPY(old_offset, coordinate_system[active_coordinate_system]);
+  if (WITHIN(_new, 0, MAX_COORDINATE_SYSTEMS - 1))
+    COPY(new_offset, coordinate_system[_new]);
+  active_coordinate_system = _new;
+  LOOP_XYZ(i) {
+    const float diff = new_offset[i] - old_offset[i];
+    if (diff) {
+      position_shift[i] += diff;
+      update_software_endstops((AxisEnum)i);
     }
-    return true;
   }
+  return true;
+}
 
-  /**
-   * G53: Apply native workspace to the current move
-   *
-   * In CNC G-code G53 is a modifier.
-   * It precedes a movement command (or other modifiers) on the same line.
-   * This is the first command to use parser.chain() to make this possible.
-   *
-   * Marlin also uses G53 on a line by itself to go back to native space.
-   */
-  inline void gcode_G53() {
-    const int8_t _system = active_coordinate_system;
-    active_coordinate_system = -1;
-    if (parser.chain()) { // If this command has more following...
-      process_parsed_command();
-      active_coordinate_system = _system;
-    }
+/**
+ * G53: Apply native workspace to the current move
+ *
+ * In CNC G-code G53 is a modifier.
+ * It precedes a movement command (or other modifiers) on the same line.
+ * This is the first command to use parser.chain() to make this possible.
+ *
+ * Marlin also uses G53 on a line by itself to go back to native space.
+ */
+inline void GcodeSuite::G53() {
+  const int8_t _system = active_coordinate_system;
+  active_coordinate_system = -1;
+  if (parser.chain()) { // If this command has more following...
+    process_parsed_command();
+    active_coordinate_system = _system;
   }
+}
 
-  /**
-   * G54-G59.3: Select a new workspace
-   *
-   * A workspace is an XYZ offset to the machine native space.
-   * All workspaces default to 0,0,0 at start, or with EEPROM
-   * support they may be restored from a previous session.
-   *
-   * G92 is used to set the current workspace's offset.
-   */
-  void G54_59(uint8_t subcode=0) {
-    const int8_t _space = parser.codenum - 54 + subcode;
-    if (gcode.select_coordinate_system(_space)) {
-      SERIAL_PROTOCOLLNPAIR("Select workspace ", _space);
-      report_current_position();
-    }
+/**
+ * G54-G59.3: Select a new workspace
+ *
+ * A workspace is an XYZ offset to the machine native space.
+ * All workspaces default to 0,0,0 at start, or with EEPROM
+ * support they may be restored from a previous session.
+ *
+ * G92 is used to set the current workspace's offset.
+ */
+void G54_59(uint8_t subcode=0) {
+  const int8_t _space = parser.codenum - 54 + subcode;
+  if (gcode.select_coordinate_system(_space)) {
+    SERIAL_PROTOCOLLNPAIR("Select workspace ", _space);
+    report_current_position();
   }
-  void GcodeSuite::G54() { G54_59(); }
-  void GcodeSuite::G55() { G54_59(); }
-  void GcodeSuite::G56() { G54_59(); }
-  void GcodeSuite::G57() { G54_59(); }
-  void GcodeSuite::G58() { G54_59(); }
-  void GcodeSuite::G59() { G54_59(parser.subcode); }
+}
+void GcodeSuite::G54() { G54_59(); }
+void GcodeSuite::G55() { G54_59(); }
+void GcodeSuite::G56() { G54_59(); }
+void GcodeSuite::G57() { G54_59(); }
+void GcodeSuite::G58() { G54_59(); }
+void GcodeSuite::G59() { G54_59(parser.subcode); }
 
 #endif // CNC_COORDINATE_SYSTEMS

Marlin/src/module/configuration_store.cpp

@@ -851,7 +851,7 @@ void MarlinSettings::postprocess() {
     _FIELD_TEST(coordinate_system);
 
     #if ENABLED(CNC_COORDINATE_SYSTEMS)
-      EEPROM_WRITE(coordinate_system); // 27 floats
+      EEPROM_WRITE(gcode.coordinate_system); // 27 floats
     #else
       dummy = 0.0f;
       for (uint8_t q = MAX_COORDINATE_SYSTEMS * XYZ; q--;) EEPROM_WRITE(dummy);