diff --git a/Marlin/src/HAL/STM32F1/spi_pins.h b/Marlin/src/HAL/STM32F1/spi_pins.h
index 8f2b324f64..59ac446410 100644
--- a/Marlin/src/HAL/STM32F1/spi_pins.h
+++ b/Marlin/src/HAL/STM32F1/spi_pins.h
@@ -49,10 +49,6 @@
 #undef SDSS
 #define SDSS       SS_PIN
 
-#if ENABLED(ENABLE_SPI3)
-  #define SPI_DEVICE 3
-#elif ENABLED(ENABLE_SPI2)
-  #define SPI_DEVICE 2
-#else
+#ifndef SPI_DEVICE
   #define SPI_DEVICE 1
 #endif
diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
index e6bd80c2c2..8542424d7e 100644
--- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
+++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
@@ -33,6 +33,38 @@
 
 #include "ultralcd_st7920_u8glib_rrd_AVR.h"
 
+#if F_CPU >= 20000000
+  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(50)
+#elif MB(3DRAG, K8200, K8400)
+  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(188)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
+#elif MB(MINIRAMBO, EINSY_RAMBO, EINSY_RETRO, SILVER_GATE)
+  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(250)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
+#elif MB(RAMBO)
+  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
+#elif MB(BQ_ZUM_MEGA_3D)
+  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(189)
+#elif defined(ARDUINO_ARCH_STM32)
+  #define CPU_ST7920_DELAY_1 DELAY_NS(300)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(40)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(340)
+#elif F_CPU == 16000000
+  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
+  #define CPU_ST7920_DELAY_3 DELAY_NS(63)
+#else
+  #error "No valid condition for delays in 'ultralcd_st7920_u8glib_rrd_AVR.h'"
+#endif
+
 #ifndef ST7920_DELAY_1
   #ifdef BOARD_ST7920_DELAY_1
     #define ST7920_DELAY_1 BOARD_ST7920_DELAY_1
diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h
index 70be70eab7..e8a48299cb 100644
--- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h
+++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h
@@ -37,43 +37,6 @@
 
 #include <U8glib.h>
 
-// If you want you can define your own set of delays in Configuration.h
-//#define ST7920_DELAY_1 DELAY_NS(0)
-//#define ST7920_DELAY_2 DELAY_NS(0)
-//#define ST7920_DELAY_3 DELAY_NS(0)
-
-#if F_CPU >= 20000000
-  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(50)
-#elif MB(3DRAG, K8200, K8400)
-  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(188)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
-#elif MB(MINIRAMBO, EINSY_RAMBO, EINSY_RETRO, SILVER_GATE)
-  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(250)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
-#elif MB(RAMBO)
-  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(0)
-#elif MB(BQ_ZUM_MEGA_3D)
-  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(189)
-#elif defined(ARDUINO_ARCH_STM32)
-  #define CPU_ST7920_DELAY_1 DELAY_NS(300)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(40)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(340)
-#elif F_CPU == 16000000
-  #define CPU_ST7920_DELAY_1 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_2 DELAY_NS(0)
-  #define CPU_ST7920_DELAY_3 DELAY_NS(63)
-#else
-  #error "No valid condition for delays in 'ultralcd_st7920_u8glib_rrd_AVR.h'"
-#endif
-
 void ST7920_SWSPI_SND_8BIT(uint8_t val);
 
 #if DOGM_SPI_DELAY_US > 0
@@ -82,8 +45,8 @@ void ST7920_SWSPI_SND_8BIT(uint8_t val);
   #define U8G_DELAY() DELAY_US(10)
 #endif
 
-#define ST7920_CS()              { WRITE(ST7920_CS_PIN,1); U8G_DELAY(); }
-#define ST7920_NCS()             { WRITE(ST7920_CS_PIN,0); }
+#define ST7920_CS()              { WRITE(ST7920_CS_PIN, HIGH); U8G_DELAY(); }
+#define ST7920_NCS()             { WRITE(ST7920_CS_PIN, LOW); }
 #define ST7920_SET_CMD()         { ST7920_SWSPI_SND_8BIT(0xF8); U8G_DELAY(); }
 #define ST7920_SET_DAT()         { ST7920_SWSPI_SND_8BIT(0xFA); U8G_DELAY(); }
 #define ST7920_WRITE_BYTE(a)     { ST7920_SWSPI_SND_8BIT((uint8_t)((a)&0xF0u)); ST7920_SWSPI_SND_8BIT((uint8_t)((a)<<4U)); U8G_DELAY(); }
diff --git a/Marlin/src/pins/pins_postprocess.h b/Marlin/src/pins/pins_postprocess.h
index fdf9f095cb..788f2093c1 100644
--- a/Marlin/src/pins/pins_postprocess.h
+++ b/Marlin/src/pins/pins_postprocess.h
@@ -871,6 +871,9 @@
   #undef ST7920_DELAY_1
   #undef ST7920_DELAY_2
   #undef ST7920_DELAY_3
+  #undef BOARD_ST7920_DELAY_1
+  #undef BOARD_ST7920_DELAY_2
+  #undef BOARD_ST7920_DELAY_3
 #endif
 
 #undef HAS_FREE_AUX2_PINS
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
index ce43e677e2..16c247cc87 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
@@ -210,14 +210,13 @@
 #endif
 
 #if SD_CONNECTION_IS(LCD)
-  #define ENABLE_SPI3
+  #define SPI_DEVICE                           3
   #define SD_DETECT_PIN                     PB9
   #define SCK_PIN                           PB3
   #define MISO_PIN                          PB4
   #define MOSI_PIN                          PB5
   #define SS_PIN                            PA15
 #elif SD_CONNECTION_IS(ONBOARD)
-  #define ENABLE_SPI1
   #define SD_DETECT_PIN                     PA3
   #define SCK_PIN                           PA5
   #define MISO_PIN                          PA6
diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
index 66930a2ea5..0e94249a99 100644
--- a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
+++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
@@ -165,7 +165,6 @@
 // SD-NAND
 //
 #if SD_CONNECTION_IS(ONBOARD)
-  #define ENABLE_SPI1
   #define SD_DETECT_PIN                     -1
   #define SCK_PIN                           PA5
   #define MISO_PIN                          PA6
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
index 6d87e6b14f..d89cfc6da8 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
@@ -185,7 +185,7 @@
 
 // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
 // Needs to use SPI2
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 #define SCK_PIN                             PB13
 #define MISO_PIN                            PB14
 #define MOSI_PIN                            PB15
diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
index bdce235841..262a9a241b 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
@@ -200,7 +200,7 @@
 
 // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
 // so SPI2 is required.
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 #define SCK_PIN                             PB13
 #define MISO_PIN                            PB14
 #define MOSI_PIN                            PB15
diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
index 7f3ab03654..bf3389492a 100644
--- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
+++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
@@ -56,7 +56,7 @@
 // SPI
 // Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
 //
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 // SPI Flash
 #define HAS_SPI_FLASH                          1
diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
index 55a809efab..4f555c373f 100644
--- a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h
@@ -132,7 +132,7 @@
 //
 // LCD / Controller
 //
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 #define SS_PIN                              PB12
 #define SCK_PIN                             PB13
 #define MISO_PIN                            PB14
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
index 63c0da476d..e6c8098f2a 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
@@ -166,7 +166,7 @@
 #endif
 
 // SPI1(PA7) & SPI3(PB5) not available
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 #if ENABLED(SDIO_SUPPORT)
   #define SCK_PIN                           PB13  // SPI2
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
index 4998c92dc5..2b7417c29f 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
@@ -55,8 +55,7 @@
 //
 // Note: MKS Robin board is using SPI2 interface.
 //
-//#define SPI_MODULE                           2
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 //
 // Limit Switches
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
index af2908545b..ffcdc3cfdf 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
@@ -167,7 +167,7 @@
 //
 // SD Card
 //
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 #define SD_DETECT_PIN                       PC10
 #define SCK_PIN                             PB13
 #define MISO_PIN                            PB14
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
index ffd21917dd..ab5350e4de 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
@@ -34,7 +34,6 @@
 
 //#define DISABLE_DEBUG
 #define DISABLE_JTAG
-#define ENABLE_SPI2
 
 //
 // Limit Switches
@@ -135,8 +134,12 @@
 //
 // SD Card
 //
-#define ENABLE_SPI2
 #define SD_DETECT_PIN                       PC10
+
+//
+// SPI
+//
+#define SPI_DEVICE                             2
 #define SCK_PIN                             PB13
 #define MISO_PIN                            P1B4
 #define MOSI_PIN                            P1B5
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
index 493efc5c7b..4c1299fe02 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
@@ -38,7 +38,6 @@
 
 //#define DISABLE_DEBUG
 #define DISABLE_JTAG
-#define ENABLE_SPI2
 
 //
 // Servos
@@ -87,9 +86,9 @@
 //
 // Temperature Sensors
 //
-#define TEMP_BED_PIN                        PA1   //TB
-#define TEMP_0_PIN                          PA0   //TH1
-#define TEMP_1_PIN                          PA2   //TH2
+#define TEMP_BED_PIN                        PA1   // TB
+#define TEMP_0_PIN                          PA0   // TH1
+#define TEMP_1_PIN                          PA2   // TH2
 
 #define FIL_RUNOUT_PIN                      PB10  // MT_DET
 
@@ -132,24 +131,22 @@
 
   #endif // !MKS_MINI_12864
 
+  #define BOARD_ST7920_DELAY_1     DELAY_NS(125)
+  #define BOARD_ST7920_DELAY_2     DELAY_NS(125)
+  #define BOARD_ST7920_DELAY_3     DELAY_NS(125)
+
 #endif // HAS_WIRED_LCD
 
 //
 // SD Card
 //
-#define ENABLE_SPI2
 #define SD_DETECT_PIN                       PC10
+
+//
+// SPI
+//
+#define SPI_DEVICE                             2
 #define SCK_PIN                             PB13
 #define MISO_PIN                            PB14
 #define MOSI_PIN                            PB15
 #define SS_PIN                              PA15
-
-#ifndef BOARD_ST7920_DELAY_1
-  #define BOARD_ST7920_DELAY_1     DELAY_NS(125)
-#endif
-#ifndef BOARD_ST7920_DELAY_2
-  #define BOARD_ST7920_DELAY_2     DELAY_NS(125)
-#endif
-#ifndef BOARD_ST7920_DELAY_3
-  #define BOARD_ST7920_DELAY_3     DELAY_NS(125)
-#endif
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
index 14f9c3b626..8c63f79732 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
@@ -48,7 +48,7 @@
   #define MARLIN_EEPROM_SIZE    EEPROM_PAGE_SIZE  // 2KB
 #endif
 
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 //
 // Limit Switches
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
index 7f2ae61aae..ff381b3753 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
@@ -48,7 +48,7 @@
   #define MARLIN_EEPROM_SIZE    EEPROM_PAGE_SIZE  // 2KB
 #endif
 
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 //
 // Limit Switches
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
index fbd12fb59c..0630c0f3cb 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
@@ -55,8 +55,7 @@
 //
 // Note: MKS Robin board is using SPI2 interface.
 //
-//#define SPI_MODULE                           2
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 //
 // Limit Switches
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
index db6bc93205..639a8f0579 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
@@ -41,8 +41,7 @@
 //
 // Note: MKS Robin board is using SPI2 interface.
 //
-//#define SPI_MODULE                           2
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 //
 // Servos
@@ -191,7 +190,6 @@
 #endif
 
 #if SD_CONNECTION_IS(LCD)
-  #define ENABLE_SPI2
   #define SD_DETECT_PIN                     PG3
   #define SCK_PIN                           PB13
   #define MISO_PIN                          PB14
diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
index bfd1f2abdc..818dbb5f7e 100644
--- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
+++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
@@ -173,7 +173,7 @@
 #endif
 
 // SPI1(PA7) & SPI3(PB5) not available
-#define ENABLE_SPI2
+#define SPI_DEVICE                             2
 
 #if ENABLED(SDIO_SUPPORT)
   #define SCK_PIN                           PB13  // SPI2 ok
diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h
index ab277d4372..4dce7b79c0 100644
--- a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h
+++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h
@@ -46,8 +46,6 @@
   #define FLASH_EEPROM_LEVELING
 #endif
 
-#define ENABLE_SPI1
-
 #include "pins_RUMBA32_common.h"
 
 #if HAS_TMC_UART