diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 3858214120..90664fcaf0 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 6859e95e58..38f40192c5 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index 198a552190..2ff2417f30 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index 949d6135d6..5d21f66565 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index cc18bffaa8..1c6c83ff47 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index 38d1b8776b..be1623c75d 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index f1d8f92366..73ed711604 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index cb724a8ccb..75eec51462 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -1831,8 +1831,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index e8ba2bad5a..81f4c15c85 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 8c93058deb..4ae3e34cb2 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 4f07e88ea7..7092f7b003 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index a99596ca3e..b7da1d42ae 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1847,8 +1847,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index a49b68c4ca..9809839350 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1849,8 +1849,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 66ffda7c85..ea0c9bc2f4 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1849,8 +1849,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 965bebdf79..19cd4d0227 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 361ff5424f..16d8f39a63 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index f3a9652ca0..d4c6048df2 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 556d06fa85..1212d35858 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 965bebdf79..19cd4d0227 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 965bebdf79..19cd4d0227 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index f45a6c34b9..a7cada0f02 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -1781,8 +1781,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index bfc94bd430..bbc4dc31db 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index 2e808e2714..a60e234cda 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -1850,8 +1850,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 96e3a80283..a30d197176 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index 2e808e2714..a60e234cda 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -1850,8 +1850,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 91e93c2a29..51e0b427b7 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 20ab146c39..534658fe11 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index cebba09ee2..3e8eac8bc0 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index b0c165028d..114c5a0d07 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 91662aa1cf..b1e9c36f2b 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 77741ebec9..aa4b0d6a6c 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1846,8 +1846,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 841588636e..7241b63503 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 2ca3529945..c1ee7ffe31 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index f2aace7fd5..3e33266ced 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 8fe1cb3601..d149feab61 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index eaea230f2f..0a684a61b5 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 034559a7f5..82291f2e86 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 1a45b9b462..7a96435842 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -1841,8 +1841,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 0b90d47508..2019684e36 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 0b90d47508..2019684e36 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -1844,8 +1844,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 7098b36e2a..bacca20e0d 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 1ae4ccd45c..391affccb3 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 5c5e484609..2bc98c0967 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index e7636ddaf6..e6e95111cc 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 63c642262e..bd3a6bd0b6 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 28798fcef1..b9e11d7ee9 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index c6bc606c48..cc71cc3c1a 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index c7d6b2d9b7..b7a4c0a244 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1858,8 +1858,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 7a314121dc..ba7e96a4c5 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 18e3cafa28..cafa69004b 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index ddc318dc6c..2f89b60a4b 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1847,8 +1847,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index da26cd85b1..bcb228c5dd 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index aca7a2e57b..82c9e3c87c 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index ee98a6b086..e95d1c63af 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 6a7e7b02e2..b0f98bf543 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1845,8 +1845,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 6cbf579c7f..293ca3288c 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -1846,8 +1846,6 @@
   //#define TMC_SW_MISO       -1
   //#define TMC_SW_SCK        -1
 
-  //#define TMC_USE_CHAIN   // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
   /**
    * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
    * Set the address using jumpers on pins MS1 and MS2.