diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index 18d158295a..b98c78fde1 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -35,9 +35,6 @@ #define BOARD_INFO_NAME "Teensy3.2" #endif -#define AT90USB 1286 // Disable MarlinSerial etc. -#define USBCON //1286 // Disable MarlinSerial etc. - // // Limit Switches // @@ -92,20 +89,14 @@ // // Misc. Functions // - -//#define SDSS 16 // 8 #define LED_PIN 13 - //#define SOL1_PIN 28 +//#define SDSS 16 // 8 // // LCD / Controller // -//#define SCK_PIN 13 -//#define MISO_PIN 12 -//#define MOSI_PIN 11 - /* #if HAS_SPI_LCD #define LCD_PINS_RS 40 diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 6de50f0991..961dc0cff0 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -37,48 +37,44 @@ #define BOARD_INFO_NAME "Teensy3.6" #endif -#define AT90USB 1286 // Disable MarlinSerial etc. -#define USBCON //1286 // Disable MarlinSerial etc. -/* - - teemuatlut plan for Teensy3.5 and Teensy3.6: - USB - GND |-----#####-----| VIN 5V - X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND - X_DIR_PIN MISO1 TX1 1 | | 3.3V - Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM - Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM - Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1 - Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN - X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN - Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN - Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN - CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN - CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN - X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN - Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN - 3.3V | | GND - Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1 -AUX2 25 | 41 * * 52 | A21 DAC0 -AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS -AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1 -AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1 -D10 CONTROLLER_FAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM -D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN -D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN - SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN - - Interior pins: - LCD_PINS_RS 40 * * 53 SCK2 - LCD_PINS_ENABLE 41 * * 52 MOSI2 - LCD_PINS_D4 42 * * 51 MISO2 - LCD_PINS_D5 CS2 43 * * 50 A24 - LCD_PINS_D6 MOSI2 44 * * 49 A23 - LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC - BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2 - GND * * 3.3V - -*/ +/** + * Plan for Teensy 3.5 and Teensy 3.6: + * USB + * GND |-----#####-----| VIN 5V + * X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND + * X_DIR_PIN MISO1 TX1 1 | | 3.3V + * Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM + * Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM + * Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1 + * Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN + * X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN + * Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN + * Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN + * CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN + * CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN + * X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN + * Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN + * 3.3V | | GND + * Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1 + * AUX2 25 | 41 * * 52 | A21 DAC0 + * AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS + * AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1 + * AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1 + * D10 CONTROLLER_FAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM + * D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN + * D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN + * SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN + * + * Interior pins: + * LCD_PINS_RS 40 * * 53 SCK2 + * LCD_PINS_ENABLE 41 * * 52 MOSI2 + * LCD_PINS_D4 42 * * 51 MISO2 + * LCD_PINS_D5 CS2 43 * * 50 A24 + * LCD_PINS_D6 MOSI2 44 * * 49 A23 + * LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC + * BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2 + * GND * * 3.3V + */ // // Limit Switches @@ -121,24 +117,18 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM #define TEMP_1_PIN 0 #define TEMP_BED_PIN 1 // Bed / Analog pin numbering -#define SDSS 39 // 8 +// +// Misc. Functions +// #define LED_PIN 13 #define PS_ON_PIN 1 -#define ALARM_PIN -1 - #define FILWIDTH_PIN 6 #define SOL1_PIN 28 -#if 0 -// Pretty sure this is obsolete! -// Please use Marlin 1.1.x pins files as reference for new pins files. -#ifndef SDSUPPORT - // these are defined in the SD library if building with SD support - #define SCK_PIN 13 - #define MISO_PIN 12 - #define MOSI_PIN 11 -#endif -#endif +// +// SD Card +// +#define SDSS 39 // 8 #if HAS_SPI_LCD #define LCD_PINS_RS 40 diff --git a/Marlin/src/pins/teensy4/pins_T41U5XBB.h b/Marlin/src/pins/teensy4/pins_T41U5XBB.h index b985d0bd9c..cb4c0ea879 100644 --- a/Marlin/src/pins/teensy4/pins_T41U5XBB.h +++ b/Marlin/src/pins/teensy4/pins_T41U5XBB.h @@ -33,39 +33,44 @@ #define BOARD_INFO_NAME "Teensy4.1" #endif -#define AT90USB 1286 // Disable MarlinSerial etc. -#define USBCON //1286 // Disable MarlinSerial etc. -/* - - plan for Teensy4.0 and Teensy4.1: - USB - GND |-----#####-----| VIN (3.65 TO 5.5V) - RX1 CS1 RX1 PWM 0 | ##### | GND - TX1 MISO1 TX1 PWM 1 | | 3.3V - STPX PWM 2 | | 23 A9 PWM - DIRX PWM 3 | | 22 A8 PWM LIMZ - STPY PWM 4 | | 21 A7 RX5 LIMY - DIRY PWM 5 | | 20 A6 TX5 LIMX - STPZ PWM 6 | | 19 A5 PWM SCL0 COOL - DIRZ RX2 PWM 7 | | 18 A4 PWM SDA0 MIST - STPA TX2 PWM 8 | | 17 A3 RX4 SDA1 CYST - DIRA PWM 9 | | 16 A2 TX4 SCL1 EHOLD - STEN PWM 10 | | 15 A1 PWM RX3 PRB - SPDI MOSI0 PWM 11 | | 14 A0 PWM TX3 PANIC - SPEN MISO0 PWM 12 | | 13 LED PWM SCK0 SPWM - 3.3V | | GND - SCL PWM 24 | | 41 A17 KPSTR - SDA PWM 25 | | 40 A16 STENY - STPB MOSI1 26 | | 39 A15 MISO1 STENZ - DIRB SCK1 27 | * * * * * | 38 A14 STENA - LIMB RX7 PWM 28 | | 37 PWM STENB - DOOR TX7 PWM 29 | | 36 PWM ST0 - ST1 30 | | 35 TX8 ST3 - AUX0 31 | SDCARD | 34 RX8 ST2 - AUX1 32 |_______________| 33 PWM AUX2 +/** + * Plan for Teensy 4.0 and Teensy 4.1: + * USB + * GND |-----#####-----| VIN (3.65 TO 5.5V) + * RX1 CS1 RX1 PWM 0 | ##### | GND + * TX1 MISO1 TX1 PWM 1 | | 3.3V + * STPX PWM 2 | | 23 A9 PWM + * DIRX PWM 3 | | 22 A8 PWM LIMZ + * STPY PWM 4 | | 21 A7 RX5 LIMY + * DIRY PWM 5 | | 20 A6 TX5 LIMX + * STPZ PWM 6 | | 19 A5 PWM SCL0 COOL + * DIRZ RX2 PWM 7 | | 18 A4 PWM SDA0 MIST + * STPA TX2 PWM 8 | | 17 A3 RX4 SDA1 CYST + * DIRA PWM 9 | | 16 A2 TX4 SCL1 EHOLD + * STEN PWM 10 | | 15 A1 PWM RX3 PRB + * SPDI MOSI0 PWM 11 | | 14 A0 PWM TX3 PANIC + * SPEN MISO0 PWM 12 | | 13 LED PWM SCK0 SPWM + * 3.3V | | GND + * SCL PWM 24 | | 41 A17 KPSTR + * SDA PWM 25 | | 40 A16 STENY + * STPB MOSI1 26 | | 39 A15 MISO1 STENZ + * DIRB SCK1 27 | * * * * * | 38 A14 STENA + * LIMB RX7 PWM 28 | | 37 PWM STENB + * DOOR TX7 PWM 29 | | 36 PWM ST0 + * ST1 30 | | 35 TX8 ST3 + * AUX0 31 | SDCARD | 34 RX8 ST2 + * AUX1 32 |_______________| 33 PWM AUX2 + */ +#ifndef SDCARD_CONNECTION + #define SDCARD_CONNECTION ONBOARD +#endif -*/ +// +// Servos +// +#define SERVO0_PIN 24 +#define SERVO1_PIN 25 // // Limit Switches @@ -100,20 +105,22 @@ #define E1_DIR_PIN 27 #define E1_ENABLE_PIN 37 +// +// Heaters / Fans +// #define HEATER_0_PIN 31 #define HEATER_1_PIN 32 #define HEATER_BED_PIN 33 +// +// Temperature Sensors +// #define TEMP_0_PIN 5 // Extruder / Analog pin numbering: 2 => A2 #define TEMP_1_PIN 4 #define TEMP_BED_PIN 15 // Bed / Analog pin numbering +// +// Misc. Functions +// #define LED_PIN 13 - #define SOL0_PIN 17 -#define SERVO0_PIN 24 -#define SERVO1_PIN 25 - -#ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD -#endif diff --git a/Marlin/src/pins/teensy4/pins_TEENSY41.h b/Marlin/src/pins/teensy4/pins_TEENSY41.h index c06fdc83e8..cc7341bc23 100644 --- a/Marlin/src/pins/teensy4/pins_TEENSY41.h +++ b/Marlin/src/pins/teensy4/pins_TEENSY41.h @@ -33,39 +33,40 @@ #define BOARD_INFO_NAME "Teensy4.1" #endif -#define AT90USB 1286 // Disable MarlinSerial etc. -#define USBCON //1286 // Disable MarlinSerial etc. -/* - - plan for Teensy4.0 and Teensy4.1: - USB - GND |-----#####-----| VIN (3.65 TO 5.5V) - X_STEP_PIN CS1 RX1 PWM 0 | ##### | GND - X_DIR_PIN MISO1 TX1 PWM 1 | | 3.3V - Y_STEP_PIN PWM 2 | | 23 A9 PWM SERVO1_PIN - Y_DIR_PIN PWM 3 | | 22 A8 PWM SERVO0_PIN - Z_STEP_PIN PWM 4 | | 21 A7 RX5 - Z_DIR_PIN PWM 5 | | 20 A6 TX5 FILWIDTH_PIN - X_ENABLE_PIN PWM 6 | | 19 A5 PWM SCL0 - Y_ENABLE_PIN RX2 PWM 7 | | 18 A4 PWM SDA0 HEATER_1_PIN - Z_ENABLE_PIN TX2 PWM 8 | | 17 A3 RX4 SDA1 - E0_STEP_PIN PWM 9 | | 16 A2 TX4 SCL1 TEMP_0_PIN - E0_DIR_PIN PWM 10 | | 15 A1 PWM RX3 TEMP_BED_PIN - MOSI_PIN MOSI0 PWM 11 | | 14 A0 PWM TX3 TEMP_1_PIN - MISO_PIN MISO0 PWM 12 | | 13 LED PWM SCK0 SCK_PIN - 3.3V | | GND - Z_STOP_PIN PWM 24 | | 41 A17 - E0_ENABLE_PIN PWM 25 | | 40 A16 - FAN_PIN MOSI1 26 | | 39 A15 MISO1 X_STOP_PIN - Z-PROBE PWR SCK1 27 | * * * * * | 38 A14 Y_STOP_PIN - SOL1_PIN RX7 PWM 28 | | 37 PWM HEATER_0_PIN - FAN_PIN TX7 PWM 29 | | 36 PWM HEATER_BED_PIN - X_CS_PIN 30 | | 35 TX8 E1_ENABLE_PIN - y_CS_PIN 31 | SDCARD | 34 RX8 E1_DIR_PIN - Z_CS_PIN 32 |_______________| 33 PWM E1_STEP_PIN - +/** + * Plan for Teensy 4.0 and Teensy 4.1: + * USB + * GND |-----#####-----| VIN (3.65 TO 5.5V) + * X_STEP_PIN CS1 RX1 PWM 0 | ##### | GND + * X_DIR_PIN MISO1 TX1 PWM 1 | | 3.3V + * Y_STEP_PIN PWM 2 | | 23 A9 PWM SERVO1_PIN + * Y_DIR_PIN PWM 3 | | 22 A8 PWM SERVO0_PIN + * Z_STEP_PIN PWM 4 | | 21 A7 RX5 + * Z_DIR_PIN PWM 5 | | 20 A6 TX5 FILWIDTH_PIN + * X_ENABLE_PIN PWM 6 | | 19 A5 PWM SCL0 + * Y_ENABLE_PIN RX2 PWM 7 | | 18 A4 PWM SDA0 HEATER_1_PIN + * Z_ENABLE_PIN TX2 PWM 8 | | 17 A3 RX4 SDA1 + * E0_STEP_PIN PWM 9 | | 16 A2 TX4 SCL1 TEMP_0_PIN + * E0_DIR_PIN PWM 10 | | 15 A1 PWM RX3 TEMP_BED_PIN + * MOSI_PIN MOSI0 PWM 11 | | 14 A0 PWM TX3 TEMP_1_PIN + * MISO_PIN MISO0 PWM 12 | | 13 LED PWM SCK0 SCK_PIN + * 3.3V | | GND + * Z_STOP_PIN PWM 24 | | 41 A17 + * E0_ENABLE_PIN PWM 25 | | 40 A16 + * FAN_PIN MOSI1 26 | | 39 A15 MISO1 X_STOP_PIN + * Z-PROBE PWR SCK1 27 | * * * * * | 38 A14 Y_STOP_PIN + * SOL1_PIN RX7 PWM 28 | | 37 PWM HEATER_0_PIN + * FAN_PIN TX7 PWM 29 | | 36 PWM HEATER_BED_PIN + * X_CS_PIN 30 | | 35 TX8 E1_ENABLE_PIN + * y_CS_PIN 31 | SDCARD | 34 RX8 E1_DIR_PIN + * Z_CS_PIN 32 |_______________| 33 PWM E1_STEP_PIN + */ -*/ +// +// Servos +// +#define SERVO0_PIN 22 +#define SERVO1_PIN 23 // // Limit Switches @@ -100,6 +101,9 @@ #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 35 +// +// Heaters / Fans +// #define HEATER_0_PIN 37 #define HEATER_1_PIN 18 #define HEATER_BED_PIN 36 @@ -107,22 +111,20 @@ #define FAN_PIN 29 #endif +// +// Temperature Sensors +// #define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 #define TEMP_1_PIN 0 #define TEMP_BED_PIN 1 // Bed / Analog pin numbering +// +// Misc. Functions +// #define LED_PIN 13 +#define SOL0_PIN 28 //#define PS_ON_PIN 1 -//#define ALARM_PIN -1 - //#define FILWIDTH_PIN 6 // A6 -#define SOL0_PIN 28 -#define SERVO0_PIN 22 -#define SERVO1_PIN 23 - -//#define SCK_PIN 13 -//#define MISO_PIN 12 -//#define MOSI_PIN 11 #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD