diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 2c364614af..f4f77ef634 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2929,7 +2929,7 @@ inline void gcode_M42() {
     // use that as a starting point for each probe.
     //
     if (verbose_level > 2)
-      SERIAL_PROTOCOL("Positioning the probe...\n");
+      SERIAL_PROTOCOLPGM("Positioning the probe...\n");
 
     plan_buffer_line( X_probe_location, Y_probe_location, Z_start_location,
         ext_position,
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 9e90d564b3..4a41b6bf02 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -643,8 +643,8 @@ static void lcd_prepare_menu() {
 }
 
 #ifdef DELTA_CALIBRATION_MENU
-static void lcd_delta_calibrate_menu()
-{
+
+  static void lcd_delta_calibrate_menu() {
     START_MENU();
     MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
     MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
@@ -653,11 +653,31 @@ static void lcd_delta_calibrate_menu()
     MENU_ITEM(gcode, MSG_DELTA_CALIBRATE_Z, PSTR("G0 F8000 X0 Y90 Z0"));
     MENU_ITEM(gcode, MSG_DELTA_CALIBRATE_CENTER, PSTR("G0 F8000 X0 Y0 Z0"));
     END_MENU();
-}
+  }
+
 #endif // DELTA_CALIBRATION_MENU
 
+inline void line_to_current() {
+  #ifdef DELTA
+    calculate_delta(current_position);
+    plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
+  #else
+    plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
+  #endif
+}
+
 float move_menu_scale;
-static void lcd_move_menu_axis();
+static void lcd_move_menu_axis() {
+  START_MENU();
+  MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
+  MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
+  MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
+  if (move_menu_scale < 10.0) {
+    MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
+    MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
+  }
+  END_MENU();
+}
 
 static void _lcd_move(const char *name, int axis, int min, int max) {
   if (encoderPosition != 0) {
@@ -666,12 +686,7 @@ static void _lcd_move(const char *name, int axis, int min, int max) {
     if (min_software_endstops && current_position[axis] < min) current_position[axis] = min;
     if (max_software_endstops && current_position[axis] > max) current_position[axis] = max;
     encoderPosition = 0;
-    #ifdef DELTA
-      calculate_delta(current_position);
-      plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[axis]/60, active_extruder);
-    #else
-      plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[axis]/60, active_extruder);
-    #endif
+    line_to_current();
     lcdDrawUpdate = 1;
   }
   if (lcdDrawUpdate) lcd_implementation_drawedit(name, ftostr31(current_position[axis]));
@@ -685,30 +700,13 @@ static void lcd_move_e() {
   if (encoderPosition != 0) {
     current_position[E_AXIS] += float((int)encoderPosition) * move_menu_scale;
     encoderPosition = 0;
-    #ifdef DELTA
-      calculate_delta(current_position);
-      plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder);
-    #else
-      plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[E_AXIS]/60, active_extruder);
-    #endif
+    line_to_current();
     lcdDrawUpdate = 1;
   }
   if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("Extruder"), ftostr31(current_position[E_AXIS]));
   if (LCD_CLICKED) lcd_goto_menu(lcd_move_menu_axis);
 }
 
-static void lcd_move_menu_axis() {
-  START_MENU();
-  MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
-  MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
-  MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
-  if (move_menu_scale < 10.0) {
-    MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
-    MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
-  }
-  END_MENU();
-}
-
 static void lcd_move_menu_10mm() {
   move_menu_scale = 10.0;
   lcd_move_menu_axis();
@@ -1793,76 +1791,78 @@ char *ftostr52(const float &x) {
 }
 
 #ifdef MANUAL_BED_LEVELING
-static int _lcd_level_bed_position;
-static void _lcd_level_bed()
-{
-  if (encoderPosition != 0) {
-    refresh_cmd_timeout();
-    current_position[Z_AXIS] += float((int)encoderPosition) * MBL_Z_STEP;
-    if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS) current_position[Z_AXIS] = Z_MIN_POS;
-    if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS) current_position[Z_AXIS] = Z_MAX_POS;
-    encoderPosition = 0;
-    plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[Z_AXIS]/60, active_extruder);
-    lcdDrawUpdate = 1;
-  }
-  if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("Z"), ftostr43(current_position[Z_AXIS]));
-  static bool debounce_click = false;
-  if (LCD_CLICKED) {
-    if (!debounce_click) {
-      debounce_click = true;
-      int ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
-      int iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
-      if (iy&1) { // Zig zag
-        ix = (MESH_NUM_X_POINTS - 1) - ix;
-      }
-      mbl.set_z(ix, iy, current_position[Z_AXIS]);
-      _lcd_level_bed_position++;
-      if (_lcd_level_bed_position == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS) {
-        current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
-        plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
-        mbl.active = 1;
-        enquecommands_P(PSTR("G28"));
-        lcd_return_to_status();
-      } else {
-        current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
-        plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
-        ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
-        iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
+
+  static int _lcd_level_bed_position;
+  static void _lcd_level_bed() {
+    if (encoderPosition != 0) {
+      refresh_cmd_timeout();
+      current_position[Z_AXIS] += float((int)encoderPosition) * MBL_Z_STEP;
+      if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS) current_position[Z_AXIS] = Z_MIN_POS;
+      if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS) current_position[Z_AXIS] = Z_MAX_POS;
+      encoderPosition = 0;
+      line_to_current();
+      lcdDrawUpdate = 1;
+    }
+    if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("Z"), ftostr43(current_position[Z_AXIS]));
+    static bool debounce_click = false;
+    if (LCD_CLICKED) {
+      if (!debounce_click) {
+        debounce_click = true;
+        int ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
+        int iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
         if (iy&1) { // Zig zag
           ix = (MESH_NUM_X_POINTS - 1) - ix;
         }
-        current_position[X_AXIS] = mbl.get_x(ix);
-        current_position[Y_AXIS] = mbl.get_y(iy);
-        plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
-        lcdDrawUpdate = 1;
+        mbl.set_z(ix, iy, current_position[Z_AXIS]);
+        _lcd_level_bed_position++;
+        if (_lcd_level_bed_position == MESH_NUM_X_POINTS*MESH_NUM_Y_POINTS) {
+          current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
+          line_to_current();
+          mbl.active = 1;
+          enquecommands_P(PSTR("G28"));
+          lcd_return_to_status();
+        } else {
+          current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
+          line_to_current();
+          ix = _lcd_level_bed_position % MESH_NUM_X_POINTS;
+          iy = _lcd_level_bed_position / MESH_NUM_X_POINTS;
+          if (iy&1) { // Zig zag
+            ix = (MESH_NUM_X_POINTS - 1) - ix;
+          }
+          current_position[X_AXIS] = mbl.get_x(ix);
+          current_position[Y_AXIS] = mbl.get_y(iy);
+          line_to_current();
+          lcdDrawUpdate = 1;
+        }
       }
+    } else {
+      debounce_click = false;
     }
-  } else {
-    debounce_click = false;
   }
-}
-static void _lcd_level_bed_homing()
-{
-  if (axis_known_position[X_AXIS] &&
-      axis_known_position[Y_AXIS] &&
-      axis_known_position[Z_AXIS]) {
-    current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
-    plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
-    current_position[X_AXIS] = MESH_MIN_X;
-    current_position[Y_AXIS] = MESH_MIN_Y;
-    plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], manual_feedrate[X_AXIS]/60, active_extruder);
-    _lcd_level_bed_position = 0;
-    lcd_goto_menu(_lcd_level_bed);
+
+  static void _lcd_level_bed_homing() {
+    if (axis_known_position[X_AXIS] &&
+        axis_known_position[Y_AXIS] &&
+        axis_known_position[Z_AXIS]) {
+      current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;
+      plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
+      current_position[X_AXIS] = MESH_MIN_X;
+      current_position[Y_AXIS] = MESH_MIN_Y;
+      line_to_current();
+      _lcd_level_bed_position = 0;
+      lcd_goto_menu(_lcd_level_bed);
+    }
   }
-}
-static void lcd_level_bed() {
-  axis_known_position[X_AXIS] = false;
-  axis_known_position[Y_AXIS] = false;
-  axis_known_position[Z_AXIS] = false;
-  mbl.reset();
-  enquecommands_P(PSTR("G28"));
-  lcd_goto_menu(_lcd_level_bed_homing);
-}
+
+  static void lcd_level_bed() {
+    axis_known_position[X_AXIS] = false;
+    axis_known_position[Y_AXIS] = false;
+    axis_known_position[Z_AXIS] = false;
+    mbl.reset();
+    enquecommands_P(PSTR("G28"));
+    lcd_goto_menu(_lcd_level_bed_homing);
+  }
+
 #endif  // MANUAL_BED_LEVELING
 
-#endif //ULTRA_LCD
+#endif // ULTRA_LCD