Merge pull request #6931 from thinkyhead/bf_malyan_m150

Malyan m150 configurations

Marlin/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   #define  DEFAULT_Kp 22.2
   #define  DEFAULT_Ki 1.08
@@ -1154,7 +1155,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/Cartesio/Configuration.h

@@ -1152,7 +1152,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/Felix/Configuration.h

@@ -1136,7 +1136,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -1136,7 +1136,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h

@@ -1158,7 +1158,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/Hephestos/Configuration.h

@@ -1144,7 +1144,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -1147,7 +1147,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/K8200/Configuration.h

@@ -332,6 +332,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1185,7 +1186,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -233,9 +233,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/K8400/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1153,7 +1154,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/K8400/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1153,7 +1154,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/M150/README.md

@@ -0,0 +1,3 @@
+# Configuration for Malyan M150 hobbyking printer
+# config without automatic bed level sensor 
+# or in other words, "as stock" 

Marlin/example_configurations/M150/_Bootscreen.h

@@ -0,0 +1,104 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+#include <avr/pgmspace.h>
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+const unsigned char custom_start_bmp[1024] PROGMEM = {
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x07,0x00,0x00,0x03,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x1f,0xc0,0x00,0x0f,0xe0,0x7c,0x03,0xe0,0x78,0x1c,0x07,0x81,0xe0,0xf0,0x3e,0x0e
+,0x7f,0xe0,0x00,0x3f,0xf0,0x7e,0x07,0xe0,0xfc,0x1c,0x03,0x81,0xc1,0xf8,0x3f,0x0e
+,0x7f,0xf8,0x00,0x7f,0xf0,0x7e,0x07,0xe0,0xfc,0x1c,0x03,0xc3,0xc1,0xf8,0x3f,0x0e
+,0x7b,0xfe,0x01,0xfe,0xf0,0x7f,0x0f,0xe1,0xfe,0x1c,0x01,0xc3,0x83,0xfc,0x3f,0x8e
+,0x7c,0xff,0x87,0xf9,0xf0,0x77,0x0e,0xe1,0xfe,0x1c,0x01,0xe7,0x83,0xfc,0x3b,0x8e
+,0x7f,0x7f,0xcf,0xf7,0xf0,0x77,0x9e,0xe1,0xce,0x1c,0x00,0xe7,0x03,0x9c,0x3b,0xce
+,0x7f,0x9f,0xff,0xcf,0xf0,0x73,0x9c,0xe3,0xcf,0x1c,0x00,0xff,0x07,0x9e,0x39,0xce
+,0x7f,0xe7,0xff,0x3f,0xf0,0x73,0xfc,0xe3,0x87,0x1c,0x00,0x7e,0x07,0x0e,0x39,0xee
+,0x7f,0xfb,0xfe,0xff,0xf0,0x71,0xf8,0xe3,0x87,0x1c,0x00,0x7e,0x0f,0x0f,0x38,0xee
+,0x7f,0xfc,0xf9,0xff,0xf0,0x71,0xf8,0xe7,0xff,0x9c,0x00,0x3c,0x0f,0xff,0x38,0xfe
+,0x7f,0xff,0x27,0xff,0xf0,0x70,0xf0,0xe7,0xff,0x9c,0x00,0x3c,0x0f,0xff,0x38,0x7e
+,0x7f,0xff,0xdf,0xff,0xf0,0x70,0xf0,0xef,0xff,0xdc,0x00,0x3c,0x1f,0xff,0xb8,0x7e
+,0x7f,0xdf,0xff,0xdf,0xf0,0x70,0x60,0xef,0x03,0xdf,0xf8,0x3c,0x1e,0x07,0xb8,0x3e
+,0x7f,0xc7,0xff,0x1f,0xf0,0x70,0x60,0xee,0x01,0xdf,0xf8,0x3c,0x1c,0x03,0xb8,0x3e
+,0x7f,0xc3,0xfe,0x1f,0xf0,0x70,0x00,0xee,0x01,0xdf,0xf8,0x3c,0x1c,0x03,0xb8,0x1e
+,0x7f,0xc3,0xfe,0x1f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x7f,0xc3,0xde,0x1f,0xf0,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
+,0x7f,0xc3,0xde,0x1f,0xf0,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
+,0x7f,0xc3,0xde,0x1f,0xf0,0x7c,0x3f,0xfa,0xfb,0xff,0xff,0xff,0xfd,0x7a,0xbf,0xfe
+,0x7f,0xc3,0xde,0x1f,0xf0,0x7d,0x9f,0xfb,0xff,0xff,0xff,0xff,0xff,0x7e,0xf7,0xfe
+,0x7f,0xc3,0xde,0x1f,0xf0,0x7d,0x93,0x1a,0x8a,0x18,0xe3,0x8c,0x45,0x1a,0xa2,0xde
+,0x3f,0xc3,0xde,0x0f,0xf0,0x7c,0x2d,0xca,0xca,0xd6,0xe9,0x24,0xcd,0x6a,0xb6,0xbe
+,0x1f,0x83,0xde,0x07,0xe0,0x7d,0xa3,0x6a,0x9a,0xd6,0xe9,0x26,0x65,0x6a,0xb6,0x3e
+,0x06,0x03,0xde,0x01,0x80,0x7d,0x91,0x0a,0x8a,0xd8,0xe3,0x8c,0x45,0x1a,0xb3,0x7e
+,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xfe,0xef,0xff,0xff,0xff,0xff,0x7e
+,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xf1,0xef,0xff,0xff,0xff,0xfe,0xfe
+,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
+,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
+,0x00,0x03,0xde,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x01,0xdc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x50,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+
+};

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   #define  DEFAULT_Kp 22.2
   #define  DEFAULT_Ki 1.08
@@ -1153,7 +1154,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1152,7 +1152,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/SCARA/Configuration.h

@@ -1169,7 +1169,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/TAZ4/Configuration.h

@@ -1173,7 +1173,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -339,6 +339,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1209,7 +1210,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/WITBOX/Configuration.h

@@ -1144,7 +1144,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   #define  DEFAULT_Kp 22.2
   #define  DEFAULT_Ki 1.08
@@ -1153,7 +1154,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1271,7 +1272,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1273,7 +1274,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/delta/generic/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   #define  DEFAULT_Kp 22.2
   #define  DEFAULT_Ki 1.08
@@ -1262,7 +1263,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   #define  DEFAULT_Kp 22.2
   #define  DEFAULT_Ki 1.08
@@ -1265,7 +1266,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1271,7 +1271,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -225,9 +225,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1329,7 +1329,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h

@@ -1170,7 +1170,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/makibox/Configuration.h

@@ -312,6 +312,7 @@
   #define K1 0.95 //smoothing factor within the PID
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   #define  DEFAULT_Kp 22.2
   #define  DEFAULT_Ki 1.08
@@ -1156,7 +1157,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -1149,7 +1149,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board 

Marlin/example_configurations/wt150/Configuration.h

@@ -317,6 +317,7 @@
   #define  DEFAULT_Kd 110.78
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
   // Ultimaker
   //#define  DEFAULT_Kp 22.2
   //#define  DEFAULT_Ki 1.08
@@ -1158,7 +1159,7 @@
  *  - Click the controller to view the LCD menu
  *  - The LCD will display Japanese, Western, or Cyrillic text
  *
- * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */

Marlin/example_configurations/wt150/Configuration_adv.h

@@ -220,9 +220,9 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
-// M355 Case Light command 
-//   Set case light brightness/on/off
-
+/**
+ * M355 Case Light on-off / brightness
+ */
 //#define CASE_LIGHT_ENABLE 
 #if ENABLED(CASE_LIGHT_ENABLE) 
   #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board