Move EXTRA_FAN_SPEED above FWRETRACT

Marlin/Configuration_adv.h

@@ -1017,6 +1017,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1052,15 +1061,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/default/Configuration_adv.h

@@ -1017,6 +1017,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1052,15 +1061,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1024,6 +1024,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1059,15 +1068,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1020,6 +1020,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1055,15 +1064,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1021,6 +1021,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1056,15 +1065,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1017,6 +1017,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1052,15 +1061,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1024,6 +1024,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1059,15 +1068,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1029,6 +1029,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1064,15 +1073,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1018,6 +1018,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1053,15 +1062,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1016,6 +1016,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1051,15 +1060,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1017,6 +1017,15 @@
 
 // @section extras
 
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
 /**
  * Firmware-based and LCD-controlled retract
  *
@@ -1052,15 +1061,6 @@
   #endif
 #endif
 
-/**
- * Extra Fan Speed
- * Adds a secondary fan speed for each print-cooling fan.
- *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
- *   'M106 P<fan> T2'     : Use the set secondary speed
- *   'M106 P<fan> T1'     : Restore the previous fan speed
- */
-//#define EXTRA_FAN_SPEED
-
 /**
  * Advanced Pause
  * Experimental feature for filament change support and for parking the nozzle when paused.