andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

🎨 Rename MAX31865 elements

vanilla_fb_2.0.x
Scott Lahteine 3 years ago
parent
b77a5d4c8d
commit
8d4e4ac115
2 changed files with 64 additions and 64 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 116
      Marlin/src/libs/MAX31865.cpp
  2. 12
      Marlin/src/libs/MAX31865.h

116
Marlin/src/libs/MAX31865.cpp
View File

@ -73,10 +73,10 @@ SPISettings MAX31865::spiConfig = SPISettings(
* @param spi_clk the SPI clock pin to use
*/
MAX31865::MAX31865(int8_t spi_cs, int8_t spi_mosi, int8_t spi_miso, int8_t spi_clk) {
_cs = spi_cs;
_mosi = spi_mosi;
_miso = spi_miso;
_sclk = spi_clk;
cselPin = spi_cs;
mosiPin = spi_mosi;
misoPin = spi_miso;
sclkPin = spi_clk;
}
/**
@ -86,8 +86,8 @@ SPISettings MAX31865::spiConfig = SPISettings(
* @param spi_cs the SPI CS pin to use along with the default SPI device
*/
MAX31865::MAX31865(int8_t spi_cs) {
_cs = spi_cs;
_sclk = _miso = _mosi = -1;
cselPin = spi_cs;
sclkPin = misoPin = mosiPin = -1;
}
#else // LARGE_PINMAP
@ -104,10 +104,10 @@ SPISettings MAX31865::spiConfig = SPISettings(
* @param pin_mapping set to 1 for positive pin values
*/
MAX31865::MAX31865(uint32_t spi_cs, uint32_t spi_mosi, uint32_t spi_miso, uint32_t spi_clk, uint8_t pin_mapping) {
_cs = spi_cs;
_mosi = spi_mosi;
_miso = spi_miso;
_sclk = spi_clk;
cselPin = spi_cs;
mosiPin = spi_mosi;
misoPin = spi_miso;
sclkPin = spi_clk;
}
/**
@ -119,8 +119,8 @@ SPISettings MAX31865::spiConfig = SPISettings(
* @param pin_mapping set to 1 for positive pin values
*/
MAX31865::MAX31865(uint32_t spi_cs, uint8_t pin_mapping) {
_cs = spi_cs;
_sclk = _miso = _mosi = -1UL; //-1UL or 0xFFFFFFFF or 4294967295
cselPin = spi_cs;
sclkPin = misoPin = mosiPin = -1UL; //-1UL or 0xFFFFFFFF or 4294967295
}
#endif // LARGE_PINMAP
@ -139,12 +139,12 @@ SPISettings MAX31865::spiConfig = SPISettings(
* @param ref The resistance of the reference resistor, in ohms.
*/
void MAX31865::begin(max31865_numwires_t wires, float zero, float ref) {
Rzero = zero;
Rref = ref;
zeroRes = zero;
refRes = ref;
OUT_WRITE(_cs, HIGH);
OUT_WRITE(cselPin, HIGH);
if (_sclk != TERN(LARGE_PINMAP, -1UL, -1)) {
if (sclkPin != TERN(LARGE_PINMAP, -1UL, -1)) {
softSpiBegin(SPI_QUARTER_SPEED); // Define pin modes for Software SPI
}
else {
@ -162,10 +162,10 @@ void MAX31865::begin(max31865_numwires_t wires, float zero, float ref) {
#ifdef MAX31865_DEBUG_SPI
SERIAL_ECHOLNPGM(
TERN(LARGE_PINMAP, "LARGE_PINMAP", "Regular")
" begin call with _cs: ", _cs,
" _miso: ", _miso,
" _sclk: ", _sclk,
" _mosi: ", _mosi,
" begin call with cselPin: ", cselPin,
" misoPin: ", misoPin,
" sclkPin: ", sclkPin,
" mosiPin: ", mosiPin,
" config: ", readRegister8(MAX31865_CONFIG_REG)
);
#endif
@ -282,8 +282,8 @@ uint16_t MAX31865::readRaw() {
*/
float MAX31865::readResistance() {
// Strip the error bit (D0) and convert to a float ratio.
// less precise method: (readRaw() * Rref) >> 16
return (((readRaw() >> 1) / 32768.0f) * Rref);
// less precise method: (readRaw() * refRes) >> 16
return (((readRaw() >> 1) / 32768.0f) * refRes);
}
/**
@ -300,8 +300,8 @@ float MAX31865::temperature() {
*
* @return Temperature in C
*/
float MAX31865::temperature(uint16_t adcVal) {
return temperature(((adcVal) / 32768.0f) * Rref);
float MAX31865::temperature(uint16_t adc_val) {
return temperature(((adc_val) / 32768.0f) * refRes);
}
/**
@ -309,11 +309,11 @@ float MAX31865::temperature(uint16_t adcVal) {
* Uses the technique outlined in this PDF:
* http://www.analog.com/media/en/technical-documentation/application-notes/AN709_0.pdf
*
* @param Rrtd the resistance value in ohms
* @return the temperature in degC
* @param rtd_res the resistance value in ohms
* @return the temperature in degC
*/
float MAX31865::temperature(float Rrtd) {
float temp = (RTD_Z1 + sqrt(RTD_Z2 + (RTD_Z3 * Rrtd))) / RTD_Z4;
float MAX31865::temperature(float rtd_res) {
float temp = (RTD_Z1 + sqrt(RTD_Z2 + (RTD_Z3 * rtd_res))) * RECIPROCAL(RTD_Z4);
// From the PDF...
//
@ -324,17 +324,17 @@ float MAX31865::temperature(float Rrtd) {
// of resistance.
//
if (temp < 0) {
Rrtd = (Rrtd / Rzero) * 100; // normalize to 100 ohm
float rpoly = Rrtd;
rtd_res = (rtd_res / zeroRes) * 100; // normalize to 100 ohm
float rpoly = rtd_res;
temp = -242.02 + (2.2228 * rpoly);
rpoly *= Rrtd; // square
rpoly *= rtd_res; // square
temp += 2.5859e-3 * rpoly;
rpoly *= Rrtd; // ^3
rpoly *= rtd_res; // ^3
temp -= 4.8260e-6 * rpoly;
rpoly *= Rrtd; // ^4
rpoly *= rtd_res; // ^4
temp -= 2.8183e-8 * rpoly;
rpoly *= Rrtd; // ^5
rpoly *= rtd_res; // ^5
temp += 1.5243e-10 * rpoly;
}
@ -399,15 +399,15 @@ uint16_t MAX31865::readRegister16(uint8_t addr) {
*/
void MAX31865::readRegisterN(uint8_t addr, uint8_t buffer[], uint8_t n) {
addr &= 0x7F; // make sure top bit is not set
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
if (sclkPin == TERN(LARGE_PINMAP, -1UL, -1))
SPI.beginTransaction(spiConfig);
else
WRITE(_sclk, LOW);
WRITE(sclkPin, LOW);
WRITE(_cs, LOW);
WRITE(cselPin, LOW);
#ifdef TARGET_LPC1768
DELAY_CYCLES(_spi_speed);
DELAY_CYCLES(spiSpeed);
#endif
spiTransfer(addr);
@ -420,10 +420,10 @@ void MAX31865::readRegisterN(uint8_t addr, uint8_t buffer[], uint8_t n) {
buffer++;
}
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
if (sclkPin == TERN(LARGE_PINMAP, -1UL, -1))
SPI.endTransaction();
WRITE(_cs, HIGH);
WRITE(cselPin, HIGH);
}
/**
@ -433,24 +433,24 @@ void MAX31865::readRegisterN(uint8_t addr, uint8_t buffer[], uint8_t n) {
* @param data the data to write
*/
void MAX31865::writeRegister8(uint8_t addr, uint8_t data) {
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
if (sclkPin == TERN(LARGE_PINMAP, -1UL, -1))
SPI.beginTransaction(spiConfig);
else
WRITE(_sclk, LOW);
WRITE(sclkPin, LOW);
WRITE(_cs, LOW);
WRITE(cselPin, LOW);
#ifdef TARGET_LPC1768
DELAY_CYCLES(_spi_speed);
DELAY_CYCLES(spiSpeed);
#endif
spiTransfer(addr | 0x80); // make sure top bit is set
spiTransfer(data);
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
if (sclkPin == TERN(LARGE_PINMAP, -1UL, -1))
SPI.endTransaction();
WRITE(_cs, HIGH);
WRITE(cselPin, HIGH);
}
/**
@ -463,19 +463,19 @@ void MAX31865::writeRegister8(uint8_t addr, uint8_t data) {
* @return the 8-bit response
*/
uint8_t MAX31865::spiTransfer(uint8_t x) {
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
if (sclkPin == TERN(LARGE_PINMAP, -1UL, -1))
return SPI.transfer(x);
#ifdef TARGET_LPC1768
return swSpiTransfer(x, _spi_speed, _sclk, _miso, _mosi);
return swSpiTransfer(x, spiSpeed, sclkPin, misoPin, mosiPin);
#else
uint8_t reply = 0;
for (int i = 7; i >= 0; i--) {
WRITE(_sclk, HIGH); DELAY_NS_VAR(_spi_delay);
WRITE(sclkPin, HIGH); DELAY_NS_VAR(spiDelay);
reply <<= 1;
WRITE(_mosi, x & _BV(i)); DELAY_NS_VAR(_spi_delay);
if (READ(_miso)) reply |= 1;
WRITE(_sclk, LOW); DELAY_NS_VAR(_spi_delay);
WRITE(mosiPin, x & _BV(i)); DELAY_NS_VAR(spiDelay);
if (READ(misoPin)) reply |= 1;
WRITE(sclkPin, LOW); DELAY_NS_VAR(spiDelay);
}
return reply;
#endif
@ -486,13 +486,13 @@ void MAX31865::softSpiBegin(const uint8_t spi_speed) {
SERIAL_ECHOLNPGM("Initializing MAX31865 Software SPI");
#endif
#ifdef TARGET_LPC1768
swSpiBegin(_sclk, _miso, _mosi);
_spi_speed = swSpiInit(spi_speed, _sclk, _mosi);
swSpiBegin(sclkPin, misoPin, mosiPin);
spiSpeed = swSpiInit(spi_speed, sclkPin, mosiPin);
#else
_spi_delay = (100UL << spi_speed) / 3; // Calculate delay in ns. Top speed is ~10MHz, or 100ns delay between bits.
OUT_WRITE(_sclk, LOW);
SET_OUTPUT(_mosi);
SET_INPUT(_miso);
spiDelay = (100UL << spi_speed) / 3; // Calculate delay in ns. Top speed is ~10MHz, or 100ns delay between bits.
OUT_WRITE(sclkPin, LOW);
SET_OUTPUT(mosiPin);
SET_INPUT(misoPin);
#endif
}

12
Marlin/src/libs/MAX31865.h
View File

@ -89,15 +89,15 @@ class MAX31865 {
private:
static SPISettings spiConfig;
TERN(LARGE_PINMAP, uint32_t, uint8_t) _sclk, _miso, _mosi, _cs;
TERN(LARGE_PINMAP, uint32_t, uint8_t) sclkPin, misoPin, mosiPin, cselPin;
#ifdef TARGET_LPC1768
uint8_t _spi_speed;
uint8_t spiSpeed;
#else
uint16_t _spi_delay;
uint16_t spiDelay;
#endif
float Rzero, Rref;
float zeroRes, refRes;
void setConfig(uint8_t config, bool enable);
@ -135,6 +135,6 @@ public:
uint16_t readRaw();
float readResistance();
float temperature();
float temperature(uint16_t adcVal);
float temperature(float Rrtd);
float temperature(uint16_t adc_val);
float temperature(float rtd_res);
};

Write Preview
Loading…
Cancel
Save