andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Add Makeboard MINI for Micromake C1

pull/1/head
Scott Lahteine 7 years ago
parent
1fbb307aaf
commit
8c78f8f790
5 changed files with 1520 additions and 62 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 55
      Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
  2. 79
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
  3. 1445
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
  4. 1
      Marlin/src/core/boards.h
  5. 2
      Marlin/src/pins/pins.h

55
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View File

@ -119,7 +119,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_RAMPS_14_EFB #define MOTHERBOARD BOARD_MAKEBOARD_MINI
#endif #endif
// Optional custom name for your RepStrap or other custom machine // Optional custom name for your RepStrap or other custom machine
@ -498,7 +498,7 @@
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
#define ENDSTOP_INTERRUPTS_FEATURE //#define ENDSTOP_INTERRUPTS_FEATURE
//============================================================================= //=============================================================================
//============================== Movement Settings ============================ //============================== Movement Settings ============================
@ -525,14 +525,18 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // MicroMake 128 Steps // choose your micro step per step configuration ( 16 factory settings )
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } // MicroMake 128 Steps #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -540,7 +544,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } // MicroMake 128 Steps #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -550,9 +554,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -562,10 +566,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 20.0 // (mm/sec) #define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0 // (mm/sec) #define DEFAULT_YJERK 20.0
#define DEFAULT_ZJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 20.0
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
@ -774,15 +778,16 @@
// @section machine // @section machine
// The size of the print bed // The size of the print bed
#define X_BED_SIZE 245 #define X_BED_SIZE 240
#define Y_BED_SIZE 245 #define Y_BED_SIZE 240
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 263 #define Z_MAX_POS 260
/** /**
* Software Endstops * Software Endstops
@ -890,9 +895,9 @@
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
#define LEFT_PROBE_BED_POSITION 15 #define LEFT_PROBE_BED_POSITION 15
#define RIGHT_PROBE_BED_POSITION 140 #define RIGHT_PROBE_BED_POSITION 170
#define FRONT_PROBE_BED_POSITION 20 #define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 200 #define BACK_PROBE_BED_POSITION 170
// The Z probe minimum outer margin (to validate G29 parameters). // The Z probe minimum outer margin (to validate G29 parameters).
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -923,10 +928,10 @@
// 3 arbitrary points to probe. // 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed. // A simple cross-product is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15 #define ABL_PROBE_PT_1_X 15
#define ABL_PROBE_PT_1_Y 140 #define ABL_PROBE_PT_1_Y 180
#define ABL_PROBE_PT_2_X 15 #define ABL_PROBE_PT_2_X 15
#define ABL_PROBE_PT_2_Y 20 #define ABL_PROBE_PT_2_Y 20
#define ABL_PROBE_PT_3_X 200 #define ABL_PROBE_PT_3_X 170
#define ABL_PROBE_PT_3_Y 20 #define ABL_PROBE_PT_3_Y 20
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
@ -1051,12 +1056,12 @@
// //
// G20/G21 Inch mode support // G20/G21 Inch mode support
// //
//#define INCH_MODE_SUPPORT #define INCH_MODE_SUPPORT
// //
// M149 Set temperature units support // M149 Set temperature units support
// //
//#define TEMPERATURE_UNITS_SUPPORT #define TEMPERATURE_UNITS_SUPPORT
// @section temperature // @section temperature
@ -1080,7 +1085,7 @@
* P1 Raise the nozzle always to Z-park height. * P1 Raise the nozzle always to Z-park height.
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
*/ */
//#define NOZZLE_PARK_FEATURE #define NOZZLE_PARK_FEATURE
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z } // Specify a park position as { X, Y, Z }
@ -1125,7 +1130,7 @@
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
* *
*/ */
//#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
// Default number of pattern repetitions // Default number of pattern repetitions
@ -1178,7 +1183,7 @@
* *
* View the current statistics with M78. * View the current statistics with M78.
*/ */
//#define PRINTCOUNTER #define PRINTCOUNTER
//============================================================================= //=============================================================================
//============================= LCD and SD support ============================ //============================= LCD and SD support ============================
@ -1260,7 +1265,7 @@
* *
* Use CRC checks and retries on the SD communication. * Use CRC checks and retries on the SD communication.
*/ */
//#define SD_CHECK_AND_RETRY #define SD_CHECK_AND_RETRY
// //
// ENCODER SETTINGS // ENCODER SETTINGS

79
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View File

@ -119,7 +119,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_RAMPS_14_EFB #define MOTHERBOARD BOARD_MAKEBOARD_MINI
#endif #endif
// Optional custom name for your RepStrap or other custom machine // Optional custom name for your RepStrap or other custom machine
@ -474,17 +474,17 @@
//#define USE_ZMAX_PLUG //#define USE_ZMAX_PLUG
// coarse Endstop Settings // coarse Endstop Settings
//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#if DISABLED(ENDSTOPPULLUPS) #if DISABLED(ENDSTOPPULLUPS)
// fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
//#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_XMAX
//#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_YMAX
//#define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_YMIN
#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN
#define ENDSTOPPULLUP_ZMIN_PROBE //#define ENDSTOPPULLUP_ZMIN_PROBE
#endif #endif
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
@ -498,7 +498,7 @@
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
#define ENDSTOP_INTERRUPTS_FEATURE //#define ENDSTOP_INTERRUPTS_FEATURE
//============================================================================= //=============================================================================
//============================== Movement Settings ============================ //============================== Movement Settings ============================
@ -525,14 +525,18 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {800,800,800,1200} // MicroMake 128 Steps // choose your micro step per step configuration ( 16 factory settings )
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini)
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini)
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE {200, 200, 200, 30} // MicroMake 128 Steps #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -540,7 +544,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION {3000,3000,3000,4000} // MicroMake 128 Steps #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -550,9 +554,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -562,10 +566,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 20.0 // (mm/sec) #define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0 // (mm/sec) #define DEFAULT_YJERK 20.0
#define DEFAULT_ZJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0
//=========================================================================== //===========================================================================
//============================= Z Probe Options ============================= //============================= Z Probe Options =============================
@ -679,8 +683,8 @@
* O-- FRONT --+ * O-- FRONT --+
* (0,0) * (0,0)
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER -50 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER -20 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
// X and Y axis travel speed (mm/m) between probes // X and Y axis travel speed (mm/m) between probes
@ -693,7 +697,7 @@
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH #define PROBE_DOUBLE_TOUCH
/** /**
* Z probes require clearance when deploying, stowing, and moving between * Z probes require clearance when deploying, stowing, and moving between
@ -774,15 +778,16 @@
// @section machine // @section machine
// The size of the print bed // The size of the print bed
#define X_BED_SIZE 245 #define X_BED_SIZE 240
#define Y_BED_SIZE 245 #define Y_BED_SIZE 240
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE #define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE #define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 263 #define Z_MAX_POS 260
/** /**
* Software Endstops * Software Endstops
@ -890,9 +895,9 @@
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
#define LEFT_PROBE_BED_POSITION 15 #define LEFT_PROBE_BED_POSITION 15
#define RIGHT_PROBE_BED_POSITION 140 #define RIGHT_PROBE_BED_POSITION 170
#define FRONT_PROBE_BED_POSITION 20 #define FRONT_PROBE_BED_POSITION 20
#define BACK_PROBE_BED_POSITION 200 #define BACK_PROBE_BED_POSITION 170
// The Z probe minimum outer margin (to validate G29 parameters). // The Z probe minimum outer margin (to validate G29 parameters).
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -923,10 +928,10 @@
// 3 arbitrary points to probe. // 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed. // A simple cross-product is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 15 #define ABL_PROBE_PT_1_X 15
#define ABL_PROBE_PT_1_Y 140 #define ABL_PROBE_PT_1_Y 180
#define ABL_PROBE_PT_2_X 15 #define ABL_PROBE_PT_2_X 15
#define ABL_PROBE_PT_2_Y 20 #define ABL_PROBE_PT_2_Y 20
#define ABL_PROBE_PT_3_X 200 #define ABL_PROBE_PT_3_X 170
#define ABL_PROBE_PT_3_Y 20 #define ABL_PROBE_PT_3_Y 20
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
@ -1029,7 +1034,7 @@
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// //
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands #define EEPROM_SETTINGS // Enable for M500 and M501 commands
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
@ -1051,12 +1056,12 @@
// //
// G20/G21 Inch mode support // G20/G21 Inch mode support
// //
//#define INCH_MODE_SUPPORT #define INCH_MODE_SUPPORT
// //
// M149 Set temperature units support // M149 Set temperature units support
// //
//#define TEMPERATURE_UNITS_SUPPORT #define TEMPERATURE_UNITS_SUPPORT
// @section temperature // @section temperature
@ -1080,7 +1085,7 @@
* P1 Raise the nozzle always to Z-park height. * P1 Raise the nozzle always to Z-park height.
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
*/ */
//#define NOZZLE_PARK_FEATURE #define NOZZLE_PARK_FEATURE
#if ENABLED(NOZZLE_PARK_FEATURE) #if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z } // Specify a park position as { X, Y, Z }
@ -1125,7 +1130,7 @@
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
* *
*/ */
//#define NOZZLE_CLEAN_FEATURE #define NOZZLE_CLEAN_FEATURE
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
// Default number of pattern repetitions // Default number of pattern repetitions
@ -1178,7 +1183,7 @@
* *
* View the current statistics with M78. * View the current statistics with M78.
*/ */
//#define PRINTCOUNTER #define PRINTCOUNTER
//============================================================================= //=============================================================================
//============================= LCD and SD support ============================ //============================= LCD and SD support ============================
@ -1260,7 +1265,7 @@
* *
* Use CRC checks and retries on the SD communication. * Use CRC checks and retries on the SD communication.
*/ */
//#define SD_CHECK_AND_RETRY #define SD_CHECK_AND_RETRY
// //
// ENCODER SETTINGS // ENCODER SETTINGS
@ -1314,7 +1319,7 @@
// If you have a speaker that can produce tones, enable it here. // If you have a speaker that can produce tones, enable it here.
// By default Marlin assumes you have a buzzer with a fixed frequency. // By default Marlin assumes you have a buzzer with a fixed frequency.
// //
//#define SPEAKER #define SPEAKER
// //
// The duration and frequency for the UI feedback sound. // The duration and frequency for the UI feedback sound.
@ -1323,8 +1328,8 @@
// Note: Test audio output with the G-Code: // Note: Test audio output with the G-Code:
// M300 S<frequency Hz> P<duration ms> // M300 S<frequency Hz> P<duration ms>
// //
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 #define LCD_FEEDBACK_FREQUENCY_HZ 1000
// //
// CONTROLLER TYPE: Standard // CONTROLLER TYPE: Standard

1445
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

File diff suppressed because it is too large

1
Marlin/src/core/boards.h
View File

@ -101,6 +101,7 @@
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers #define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D #define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica) #define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
//ARM 32 //ARM 32
#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE #define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE
#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE #define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE

2
Marlin/src/pins/pins.h
View File

@ -118,6 +118,8 @@
#include "pins_RUMBA.h" // ATmega2560 #include "pins_RUMBA.h" // ATmega2560
#elif MB(BQ_ZUM_MEGA_3D) #elif MB(BQ_ZUM_MEGA_3D)
#include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560 #include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560
#elif MB(MAKEBOARD_MINI)
#include "pins_MAKEBOARD_MINI.h" // ATmega2560
// //
// Other ATmega1280, ATmega2560 // Other ATmega1280, ATmega2560

Write Preview
Loading…
Cancel
Save