Browse Source

Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch

BugFix for incorrect E-speed calculation
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
commit
8b44413498
  1. 2
      Marlin/Marlin_main.cpp
  2. 31
      Marlin/planner.cpp
  3. 11
      Marlin/planner.h
  4. 24
      Marlin/stepper.cpp
  5. 10
      Marlin/stepper.h

2
Marlin/Marlin_main.cpp

@ -6988,7 +6988,7 @@ inline void gcode_M503() {
*/ */
inline void gcode_M905() { inline void gcode_M905() {
stepper.synchronize(); stepper.synchronize();
stepper.advance_M905(code_seen('K') ? code_value_float() : -1.0); planner.advance_M905(code_seen('K') ? code_value_float() : -1.0);
} }
#endif #endif

31
Marlin/planner.cpp

@ -131,6 +131,11 @@ float Planner::previous_speed[NUM_AXIS],
long Planner::axis_segment_time[2][3] = { {MAX_FREQ_TIME + 1, 0, 0}, {MAX_FREQ_TIME + 1, 0, 0} }; long Planner::axis_segment_time[2][3] = { {MAX_FREQ_TIME + 1, 0, 0}, {MAX_FREQ_TIME + 1, 0, 0} };
#endif #endif
#if ENABLED(LIN_ADVANCE)
float Planner::extruder_advance_k = LIN_ADVANCE_K;
float Planner::position_float[NUM_AXIS] = { 0 };
#endif
/** /**
* Class and Instance Methods * Class and Instance Methods
*/ */
@ -140,6 +145,9 @@ Planner::Planner() { init(); }
void Planner::init() { void Planner::init() {
block_buffer_head = block_buffer_tail = 0; block_buffer_head = block_buffer_tail = 0;
ZERO(position); ZERO(position);
#if ENABLED(LIN_ADVANCE)
ZERO(position_float);
#endif
ZERO(previous_speed); ZERO(previous_speed);
previous_nominal_speed = 0.0; previous_nominal_speed = 0.0;
#if ABL_PLANAR #if ABL_PLANAR
@ -604,6 +612,14 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
lround(c * axis_steps_per_mm[Z_AXIS]), lround(c * axis_steps_per_mm[Z_AXIS]),
lround(e * axis_steps_per_mm[E_AXIS]) lround(e * axis_steps_per_mm[E_AXIS])
}; };
#if ENABLED(LIN_ADVANCE)
float target_float[XYZE] = {a, b, c, e};
float de_float = target_float[E_AXIS] - position_float[E_AXIS];
float mm_D_float = sqrt(sq(target_float[X_AXIS] - position_float[X_AXIS]) + sq(target_float[Y_AXIS] - position_float[Y_AXIS]));
memcpy(position_float, target_float, sizeof(position_float));
#endif
long da = target[X_AXIS] - position[X_AXIS], long da = target[X_AXIS] - position[X_AXIS],
db = target[Y_AXIS] - position[Y_AXIS], db = target[Y_AXIS] - position[Y_AXIS],
@ -1232,12 +1248,12 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
// This leads to an enormous number of advance steps due to a huge e_acceleration. // This leads to an enormous number of advance steps due to a huge e_acceleration.
// The math is correct, but you don't want a retract move done with advance! // The math is correct, but you don't want a retract move done with advance!
// So this situation is filtered out here. // So this situation is filtered out here.
if (!esteps || (!block->steps[X_AXIS] && !block->steps[Y_AXIS]) || stepper.get_advance_k() == 0 || (uint32_t)esteps == block->step_event_count) { if (!esteps || (!block->steps[X_AXIS] && !block->steps[Y_AXIS]) || extruder_advance_k == 0.0 || (uint32_t)esteps == block->step_event_count) {
block->use_advance_lead = false; block->use_advance_lead = false;
} }
else { else {
block->use_advance_lead = true; block->use_advance_lead = true;
block->e_speed_multiplier8 = (esteps << 8) / block->step_event_count; block->abs_adv_steps_multiplier8 = lround(extruder_advance_k * (de_float / mm_D_float) * block->nominal_speed / (float)block->nominal_rate * axis_steps_per_mm[Z_AXIS] * 256.0);
} }
#elif ENABLED(ADVANCE) #elif ENABLED(ADVANCE)
@ -1354,3 +1370,14 @@ void Planner::refresh_positioning() {
} }
#endif #endif
#if ENABLED(LIN_ADVANCE)
void Planner::advance_M905(const float &k) {
if (k >= 0.0) extruder_advance_k = k;
SERIAL_ECHO_START;
SERIAL_ECHOPAIR("Advance factor: ", extruder_advance_k);
SERIAL_EOL;
}
#endif

11
Marlin/planner.h

@ -95,7 +95,7 @@ typedef struct {
// Advance extrusion // Advance extrusion
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
bool use_advance_lead; bool use_advance_lead;
int16_t e_speed_multiplier8; // Factorised by 2^8 to avoid float uint32_t abs_adv_steps_multiplier8; // Factorised by 2^8 to avoid float
#elif ENABLED(ADVANCE) #elif ENABLED(ADVANCE)
int32_t advance_rate; int32_t advance_rate;
volatile int32_t initial_advance; volatile int32_t initial_advance;
@ -196,6 +196,11 @@ class Planner {
// Segment times (in µs). Used for speed calculations // Segment times (in µs). Used for speed calculations
static long axis_segment_time[2][3]; static long axis_segment_time[2][3];
#endif #endif
#if ENABLED(LIN_ADVANCE)
static float position_float[NUM_AXIS];
static float extruder_advance_k;
#endif
public: public:
@ -245,6 +250,10 @@ class Planner {
#define ARG_Z const float &lz #define ARG_Z const float &lz
#endif #endif
#if ENABLED(LIN_ADVANCE)
void advance_M905(const float &k);
#endif
/** /**
* Planner::_buffer_line * Planner::_buffer_line

24
Marlin/stepper.cpp

@ -96,8 +96,7 @@ volatile uint32_t Stepper::step_events_completed = 0; // The number of step even
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
volatile int Stepper::e_steps[E_STEPPERS]; volatile int Stepper::e_steps[E_STEPPERS];
int Stepper::extruder_advance_k = LIN_ADVANCE_K, int Stepper::final_estep_rate,
Stepper::final_estep_rate,
Stepper::current_estep_rate[E_STEPPERS], Stepper::current_estep_rate[E_STEPPERS],
Stepper::current_adv_steps[E_STEPPERS]; Stepper::current_adv_steps[E_STEPPERS];
#else #else
@ -534,7 +533,7 @@ void Stepper::isr() {
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
if (current_block->use_advance_lead) { if (current_block->use_advance_lead) {
int delta_adv_steps = (((long)extruder_advance_k * current_estep_rate[TOOL_E_INDEX]) >> 9) - current_adv_steps[TOOL_E_INDEX]; int delta_adv_steps = current_estep_rate[TOOL_E_INDEX] - current_adv_steps[TOOL_E_INDEX];
current_adv_steps[TOOL_E_INDEX] += delta_adv_steps; current_adv_steps[TOOL_E_INDEX] += delta_adv_steps;
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
// Mixing extruders apply advance lead proportionally // Mixing extruders apply advance lead proportionally
@ -572,9 +571,9 @@ void Stepper::isr() {
if (current_block->use_advance_lead) { if (current_block->use_advance_lead) {
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
MIXING_STEPPERS_LOOP(j) MIXING_STEPPERS_LOOP(j)
current_estep_rate[j] = ((uint32_t)acc_step_rate * current_block->e_speed_multiplier8 * current_block->step_event_count / current_block->mix_event_count[j]) >> 8; current_estep_rate[j] = ((uint32_t)acc_step_rate * current_block->abs_adv_steps_multiplier8 * current_block->step_event_count / current_block->mix_event_count[j]) >> 17;
#else #else
current_estep_rate[TOOL_E_INDEX] = ((uint32_t)acc_step_rate * current_block->e_speed_multiplier8) >> 8; current_estep_rate[TOOL_E_INDEX] = ((uint32_t)acc_step_rate * current_block->abs_adv_steps_multiplier8) >> 17;
#endif #endif
} }
@ -624,9 +623,9 @@ void Stepper::isr() {
if (current_block->use_advance_lead) { if (current_block->use_advance_lead) {
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
MIXING_STEPPERS_LOOP(j) MIXING_STEPPERS_LOOP(j)
current_estep_rate[j] = ((uint32_t)step_rate * current_block->e_speed_multiplier8 * current_block->step_event_count / current_block->mix_event_count[j]) >> 8; current_estep_rate[j] = ((uint32_t)step_rate * current_block->abs_adv_steps_multiplier8 * current_block->step_event_count / current_block->mix_event_count[j]) >> 17;
#else #else
current_estep_rate[TOOL_E_INDEX] = ((uint32_t)step_rate * current_block->e_speed_multiplier8) >> 8; current_estep_rate[TOOL_E_INDEX] = ((uint32_t)step_rate * current_block->abs_adv_steps_multiplier8) >> 17;
#endif #endif
} }
@ -1350,14 +1349,3 @@ void Stepper::report_positions() {
} }
#endif // HAS_MICROSTEPS #endif // HAS_MICROSTEPS
#if ENABLED(LIN_ADVANCE)
void Stepper::advance_M905(const float &k) {
if (k >= 0) extruder_advance_k = k;
SERIAL_ECHO_START;
SERIAL_ECHOPAIR("Advance factor: ", extruder_advance_k);
SERIAL_EOL;
}
#endif // LIN_ADVANCE

10
Marlin/stepper.h

@ -109,7 +109,6 @@ class Stepper {
static volatile unsigned char eISR_Rate; static volatile unsigned char eISR_Rate;
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
static volatile int e_steps[E_STEPPERS]; static volatile int e_steps[E_STEPPERS];
static int extruder_advance_k;
static int final_estep_rate; static int final_estep_rate;
static int current_estep_rate[E_STEPPERS]; // Actual extruder speed [steps/s] static int current_estep_rate[E_STEPPERS]; // Actual extruder speed [steps/s]
static int current_adv_steps[E_STEPPERS]; // The amount of current added esteps due to advance. static int current_adv_steps[E_STEPPERS]; // The amount of current added esteps due to advance.
@ -277,11 +276,6 @@ class Stepper {
return endstops_trigsteps[axis] * planner.steps_to_mm[axis]; return endstops_trigsteps[axis] * planner.steps_to_mm[axis];
} }
#if ENABLED(LIN_ADVANCE)
void advance_M905(const float &k);
FORCE_INLINE int get_advance_k() { return extruder_advance_k; }
#endif
private: private:
static FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) { static FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) {
@ -367,8 +361,8 @@ class Stepper {
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
if (current_block->use_advance_lead) { if (current_block->use_advance_lead) {
current_estep_rate[current_block->active_extruder] = ((unsigned long)acc_step_rate * current_block->e_speed_multiplier8) >> 8; current_estep_rate[current_block->active_extruder] = ((unsigned long)acc_step_rate * current_block->abs_adv_steps_multiplier8) >> 17;
final_estep_rate = (current_block->nominal_rate * current_block->e_speed_multiplier8) >> 8; final_estep_rate = (current_block->nominal_rate * current_block->abs_adv_steps_multiplier8) >> 17;
} }
#endif #endif

Loading…
Cancel
Save