From 896dfa05775f9e4464d6aeeb7fb63b36c7521bf6 Mon Sep 17 00:00:00 2001 From: Luc Van Daele Date: Mon, 12 Jun 2017 08:07:19 +0200 Subject: [PATCH] G33 eccentric probe fixes (#6850) * excentric probe config fix * undo last commit * eccentric probe fix * oops * !stow after each probe * deploy/stow fix * E parameter + bit of cleanup * comment * LCD menu fix --- Marlin/Marlin_main.cpp | 56 ++++++++++++++++++++---------------------- Marlin/ultralcd.cpp | 2 +- 2 files changed, 28 insertions(+), 30 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index d66a8d7092..35a9f3e5dd 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -5080,6 +5080,8 @@ void home_all_axes() { gcode_G28(true); } * V0 Dry-run mode. Report settings and probe results. No calibration. * V1 Report settings * V2 Report settings and probe results + * + * E Engage the probe for each point */ inline void gcode_G33() { @@ -5102,6 +5104,7 @@ void home_all_axes() { gcode_G28(true); } } const bool towers_set = !parser.seen('T'), + stow_after_each = parser.seen('E'), _1p_calibration = probe_points == 1, _4p_calibration = probe_points == 2, _4p_towers_points = _4p_calibration && towers_set, @@ -5120,13 +5123,30 @@ void home_all_axes() { gcode_G28(true); } _7p_double_circle ? 0.5 : 0), radius = (1 + circles * 0.1) * delta_calibration_radius; for (uint8_t axis = 1; axis < 13; ++axis) { - if (!position_is_reachable_by_probe_xy(cos(RADIANS(180 + 30 * axis)) * radius, sin(RADIANS(180 + 30 * axis)) * radius)) { + if (!position_is_reachable_xy(cos(RADIANS(180 + 30 * axis)) * radius, sin(RADIANS(180 + 30 * axis)) * radius)) { SERIAL_PROTOCOLLNPGM("?(M665 B)ed radius is implausible."); return; } } } + const static char save_message[] PROGMEM = "Save with M500 and/or copy to Configuration.h"; + const float dx = (X_PROBE_OFFSET_FROM_EXTRUDER), + dy = (Y_PROBE_OFFSET_FROM_EXTRUDER); + int8_t iterations = 0; + float test_precision, + zero_std_dev = (verbose_level ? 999.0 : 0.0), // 0.0 in dry-run mode : forced end + zero_std_dev_old = zero_std_dev, + e_old[XYZ] = { + endstop_adj[A_AXIS], + endstop_adj[B_AXIS], + endstop_adj[C_AXIS] + }, + dr_old = delta_radius, + zh_old = home_offset[Z_AXIS], + alpha_old = delta_tower_angle_trim[A_AXIS], + beta_old = delta_tower_angle_trim[B_AXIS]; + SERIAL_PROTOCOLLNPGM("G33 Auto Calibrate"); stepper.synchronize(); @@ -5138,25 +5158,11 @@ void home_all_axes() { gcode_G28(true); } tool_change(0, 0, true); #endif setup_for_endstop_or_probe_move(); - + DEPLOY_PROBE(); endstops.enable(true); home_delta(); endstops.not_homing(); - const static char save_message[] PROGMEM = "Save with M500 and/or copy to Configuration.h"; - float test_precision, - zero_std_dev = (verbose_level ? 999.0 : 0.0), // 0.0 in dry-run mode : forced end - zero_std_dev_old = zero_std_dev, - e_old[XYZ] = { - endstop_adj[A_AXIS], - endstop_adj[B_AXIS], - endstop_adj[C_AXIS] - }, - dr_old = delta_radius, - zh_old = home_offset[Z_AXIS], - alpha_old = delta_tower_angle_trim[A_AXIS], - beta_old = delta_tower_angle_trim[B_AXIS]; - // print settings SERIAL_PROTOCOLPGM("Checking... AC"); @@ -5189,13 +5195,7 @@ void home_all_axes() { gcode_G28(true); } SERIAL_EOL(); } - #if ENABLED(Z_PROBE_SLED) - DEPLOY_PROBE(); - #endif - - int8_t iterations = 0; - - home_offset[Z_AXIS] -= probe_pt(0.0, 0.0 , true, 1); // 1st probe to set height + home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1); // 1st probe to set height do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES); do { @@ -5210,12 +5210,12 @@ void home_all_axes() { gcode_G28(true); } // Probe the points if (!_7p_half_circle && !_7p_triple_circle) { // probe the center - z_at_pt[0] += probe_pt(0.0, 0.0 , true, 1); + z_at_pt[0] += probe_pt(dx, dy, stow_after_each, 1); } if (_7p_calibration) { // probe extra center points for (int8_t axis = _7p_multi_circle ? 11 : 9; axis > 0; axis -= _7p_multi_circle ? 2 : 4) { const float a = RADIANS(180 + 30 * axis), r = delta_calibration_radius * 0.1; - z_at_pt[0] += probe_pt(cos(a) * r, sin(a) * r, true, 1); // TODO: Needs error handling + z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1); } z_at_pt[0] /= float(_7p_double_circle ? 7 : probe_points); } @@ -5230,7 +5230,7 @@ void home_all_axes() { gcode_G28(true); } for (float circles = -offset_circles ; circles <= offset_circles; circles++) { const float a = RADIANS(180 + 30 * axis), r = delta_calibration_radius * (1 + circles * (zig_zag ? 0.1 : -0.1)); - z_at_pt[axis] += probe_pt(cos(a) * r, sin(a) * r, true, 1); // TODO: Needs error handling + z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1); } zig_zag = !zig_zag; z_at_pt[axis] /= (2 * offset_circles + 1); @@ -5452,13 +5452,11 @@ void home_all_axes() { gcode_G28(true); } #if ENABLED(DELTA_HOME_TO_SAFE_ZONE) do_blocking_move_to_z(delta_clip_start_height); #endif + STOW_PROBE(); clean_up_after_endstop_or_probe_move(); #if HOTENDS > 1 tool_change(old_tool_index, 0, true); #endif - #if ENABLED(Z_PROBE_SLED) - RETRACT_PROBE(); - #endif } #endif // DELTA_AUTO_CALIBRATION diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 503ae95b3f..fa22df4efa 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -2323,7 +2323,7 @@ void kill_screen(const char* lcd_msg) { MENU_BACK(MSG_MAIN); #if ENABLED(DELTA_AUTO_CALIBRATION) MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33")); - MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1 A")); + MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1")); #endif MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home); if (axis_homed[Z_AXIS]) {