From 88b6a15b47967b9b2e50050cfc86f3cec046f563 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 1 Mar 2018 15:11:12 -0600 Subject: [PATCH] Update M900 verbiage --- Marlin/src/gcode/feature/advance/M900.cpp | 4 ++-- Marlin/src/gcode/gcode.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/src/gcode/feature/advance/M900.cpp b/Marlin/src/gcode/feature/advance/M900.cpp index e9d5360a97..dd286e0475 100644 --- a/Marlin/src/gcode/feature/advance/M900.cpp +++ b/Marlin/src/gcode/feature/advance/M900.cpp @@ -29,9 +29,9 @@ #include "../../../module/stepper.h" /** - * M900: Set and/or Get advance K factor + * M900: Get or Set Linear Advance K-factor * - * K Set advance K factor + * K Set advance K factor */ void GcodeSuite::M900() { if (parser.seenval('K')) { diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index ef2d1dbfa2..3d1c84ff79 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -216,7 +216,7 @@ * M867 - Enable/disable or toggle error correction for position encoder modules. * M868 - Report or set position encoder module error correction threshold. * M869 - Report position encoder module error. - * M900 - Get and/or Set advance K factor and WH/D ratio. (Requires LIN_ADVANCE) + * M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE) * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires HAVE_TMC2130) * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots) * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)