From 885b0d2ec5f431d07aced632746eec5e7e371b6d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 8 Dec 2020 20:17:55 -0600 Subject: [PATCH] Style, spacing, typo cleanup for recent changes --- Marlin/src/HAL/STM32/inc/SanityCheck.h | 2 +- Marlin/src/HAL/STM32/pinsDebug.h | 3 +- Marlin/src/HAL/STM32/tft/tft_spi.cpp | 35 +++--- Marlin/src/pins/esp32/pins_MRR_ESPE.h | 4 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h | 118 +++++++++--------- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 76 +++++------ Marlin/src/pins/ramps/pins_K8600.h | 4 +- Marlin/src/pins/sanguino/pins_ZMIB_V2.h | 4 +- Marlin/src/pins/stm32f1/pins_CREALITY_V4.h | 4 +- Marlin/src/pins/stm32f1/pins_CREALITY_V427.h | 4 +- Marlin/src/pins/stm32f1/pins_CREALITY_V452.h | 6 +- .../src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h | 2 +- platformio.ini | 8 +- 13 files changed, 133 insertions(+), 137 deletions(-) diff --git a/Marlin/src/HAL/STM32/inc/SanityCheck.h b/Marlin/src/HAL/STM32/inc/SanityCheck.h index 64632475fd..4df75a0505 100644 --- a/Marlin/src/HAL/STM32/inc/SanityCheck.h +++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h @@ -53,5 +53,5 @@ #endif #if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx) - #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_U are currently only supported on STM32F4 and STM32F1 hardware." + #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32F4 and STM32F1 hardware." #endif diff --git a/Marlin/src/HAL/STM32/pinsDebug.h b/Marlin/src/HAL/STM32/pinsDebug.h index 64ee2b03db..048f788e3d 100644 --- a/Marlin/src/HAL/STM32/pinsDebug.h +++ b/Marlin/src/HAL/STM32/pinsDebug.h @@ -141,8 +141,7 @@ uint8_t get_pin_mode(const pin_t Ard_num) { uint32_t ll_pin = STM_LL_GPIO_PIN(dp); GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(dp)); uint32_t mode = LL_GPIO_GetPinMode(port, ll_pin); - switch (mode) - { + switch (mode) { case LL_GPIO_MODE_ANALOG: return MODE_PIN_ANALOG; case LL_GPIO_MODE_INPUT: return MODE_PIN_INPUT; case LL_GPIO_MODE_OUTPUT: return MODE_PIN_OUTPUT; diff --git a/Marlin/src/HAL/STM32/tft/tft_spi.cpp b/Marlin/src/HAL/STM32/tft/tft_spi.cpp index d64ebcfe4b..1c61d09529 100644 --- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp @@ -40,19 +40,15 @@ void TFT_SPI::Init() { if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK)) == NP) return; if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return; - #if PIN_EXISTS(TFT_MISO) - if (TFT_MISO_PIN != TFT_MOSI_PIN) - if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return; + #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN + if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return; #endif SPIx.Instance = spiInstance; SPIx.State = HAL_SPI_STATE_RESET; SPIx.Init.NSS = SPI_NSS_SOFT; SPIx.Init.Mode = SPI_MODE_MASTER; - if (TFT_MISO_PIN == TFT_MOSI_PIN) - SPIx.Init.Direction = SPI_DIRECTION_1LINE; - else - SPIx.Init.Direction = SPI_DIRECTION_2LINES; + SPIx.Init.Direction = (TFT_MISO_PIN == TFT_MOSI_PIN) ? SPI_DIRECTION_1LINE : SPI_DIRECTION_2LINES; SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; SPIx.Init.CLKPhase = SPI_PHASE_1EDGE; SPIx.Init.CLKPolarity = SPI_POLARITY_LOW; @@ -64,9 +60,8 @@ void TFT_SPI::Init() { pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK); pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI); - #if PIN_EXISTS(TFT_MISO) - if (TFT_MISO_PIN != TFT_MOSI_PIN) - pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO); + #if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN + pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO); #endif pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN); @@ -119,7 +114,7 @@ void TFT_SPI::Init() { DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD; DMAtx.Init.Mode = DMA_NORMAL; DMAtx.Init.Priority = DMA_PRIORITY_LOW; - #if defined(STM32F4xx) + #ifdef STM32F4xx DMAtx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; #endif } @@ -140,11 +135,10 @@ uint32_t TFT_SPI::GetID() { } uint32_t TFT_SPI::ReadID(uint16_t Reg) { - #if !PIN_EXISTS(TFT_MISO) - return 0; - #else + uint32_t Data = 0; + #if PIN_EXISTS(TFT_MISO) uint32_t BaudRatePrescaler = SPIx.Init.BaudRatePrescaler; - uint32_t i, Data = 0; + uint32_t i; SPIx.Init.BaudRatePrescaler = SPIx.Instance == SPI1 ? SPI_BAUDRATEPRESCALER_8 : SPI_BAUDRATEPRESCALER_4; DataTransferBegin(DATASIZE_8BIT); @@ -154,12 +148,12 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) { __HAL_SPI_ENABLE(&SPIx); for (i = 0; i < 4; i++) { - if (TFT_MISO_PIN != TFT_MOSI_PIN) { + #if TFT_MISO_PIN != TFT_MOSI_PIN //if (hspi->Init.Direction == SPI_DIRECTION_2LINES) { while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {} SPIx.Instance->DR = 0; //} - } + #endif while ((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {} Data = (Data << 8) | SPIx.Instance->DR; } @@ -168,9 +162,9 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) { DataTransferEnd(); SPIx.Init.BaudRatePrescaler = BaudRatePrescaler; - - return Data >> 7; #endif + + return Data >> 7; } bool TFT_SPI::isBusy() { @@ -183,9 +177,8 @@ bool TFT_SPI::isBusy() { if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0) Abort(); } - else { + else Abort(); - } return dmaEnabled; } diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index 0c9ab43fd3..f95a53240b 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index 04e9a2f80a..86fbd18ba2 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -33,7 +33,7 @@ // SD Connection // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif // @@ -244,7 +244,7 @@ // SD Connection // #if SD_CONNECTION_IS(LCD) - #define SS_PIN EXPA2_07_PIN + #define SS_PIN EXPA2_07_PIN #endif /** @@ -286,24 +286,24 @@ * LCD LCD */ - #define LCD_PINS_RS EXPA1_03_PIN + #define LCD_PINS_RS EXPA1_03_PIN - #define BTN_EN1 EXPA1_06_PIN - #define BTN_EN2 EXPA1_04_PIN - #define BTN_ENC EXPA1_08_PIN + #define BTN_EN1 EXPA1_06_PIN + #define BTN_EN2 EXPA1_04_PIN + #define BTN_ENC EXPA1_08_PIN - #define LCD_PINS_ENABLE EXPA1_05_PIN - #define LCD_PINS_D4 EXPA1_07_PIN + #define LCD_PINS_ENABLE EXPA1_05_PIN + #define LCD_PINS_D4 EXPA1_07_PIN #elif ENABLED(CR10_STOCKDISPLAY) - #define BTN_ENC EXPA1_09_PIN // (58) open-drain - #define LCD_PINS_RS EXPA1_04_PIN + #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define LCD_PINS_RS EXPA1_04_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN #elif ENABLED(ENDER2_STOCKDISPLAY) @@ -318,36 +318,36 @@ * EXP1 */ - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define DOGLCD_CS EXPA1_04_PIN + #define DOGLCD_A0 EXPA1_05_PIN + #define DOGLCD_SCK EXPA1_10_PIN + #define DOGLCD_MOSI EXPA1_03_PIN #define FORCE_SOFT_SPI #define LCD_BACKLIGHT_PIN -1 #elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI - #define TFT_CS_PIN EXPA1_04_PIN - #define TFT_A0_PIN EXPA1_03_PIN - #define TFT_DC_PIN EXPA1_03_PIN - #define TFT_MISO_PIN EXPA2_10_PIN - #define TFT_BACKLIGHT_PIN EXPA1_08_PIN - #define TFT_RESET_PIN EXPA1_07_PIN + #define TFT_CS_PIN EXPA1_04_PIN + #define TFT_A0_PIN EXPA1_03_PIN + #define TFT_DC_PIN EXPA1_03_PIN + #define TFT_MISO_PIN EXPA2_10_PIN + #define TFT_BACKLIGHT_PIN EXPA1_08_PIN + #define TFT_RESET_PIN EXPA1_07_PIN #define LCD_USE_DMA_SPI - #define TOUCH_INT_PIN EXPA1_05_PIN - #define TOUCH_CS_PIN EXPA1_06_PIN + #define TOUCH_INT_PIN EXPA1_05_PIN + #define TOUCH_CS_PIN EXPA1_06_PIN #define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 // SPI 1 - #define SCK_PIN EXPA2_09_PIN - #define MISO_PIN EXPA2_10_PIN - #define MOSI_PIN EXPA2_05_PIN + #define SCK_PIN EXPA2_09_PIN + #define MISO_PIN EXPA2_10_PIN + #define MOSI_PIN EXPA2_05_PIN // Disable any LCD related PINs config #define LCD_PINS_ENABLE -1 @@ -358,72 +358,72 @@ #elif IS_TFTGLCD_PANEL #if ENABLED(TFTGLCD_PANEL_SPI) - #define TFTGLCD_CS EXPA2_08_PIN + #define TFTGLCD_CS EXPA2_08_PIN #endif - #define SD_DETECT_PIN EXPA2_04_PIN + #define SD_DETECT_PIN EXPA2_04_PIN #else - #define BTN_ENC EXPA1_09_PIN // (58) open-drain - #define LCD_PINS_RS EXPA1_07_PIN + #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define LCD_PINS_RS EXPA1_07_PIN - #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 - #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 + #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 + #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN - #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 + #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 #if SD_CONNECTION_IS(LCD) - #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) + #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) #endif #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS EXPA1_08_PIN - #define DOGLCD_A0 EXPA1_07_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXPA1_08_PIN + #define DOGLCD_A0 EXPA1_07_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN #define LCD_BACKLIGHT_PIN -1 #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN EXPA1_05_PIN + #define RGB_LED_R_PIN EXPA1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN EXPA1_04_PIN + #define RGB_LED_G_PIN EXPA1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN EXPA1_03_PIN + #define RGB_LED_B_PIN EXPA1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN EXPA1_05_PIN + #define NEOPIXEL_PIN EXPA1_05_PIN #endif #else // !FYSETC_MINI_12864 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS EXPA1_05_PIN - #define DOGLCD_A0 EXPA1_04_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXPA1_05_PIN + #define DOGLCD_A0 EXPA1_04_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN #define FORCE_SOFT_SPI #endif #if IS_ULTIPANEL - #define LCD_PINS_D5 EXPA1_05_PIN - #define LCD_PINS_D6 EXPA1_04_PIN - #define LCD_PINS_D7 EXPA1_03_PIN + #define LCD_PINS_D5 EXPA1_05_PIN + #define LCD_PINS_D6 EXPA1_04_PIN + #define LCD_PINS_D7 EXPA1_03_PIN #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define BTN_ENC_EN EXPA1_03_PIN // Detect the presence of the encoder + #define BTN_ENC_EN EXPA1_03_PIN // Detect the presence of the encoder #endif #endif diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 867b6b6871..a75eb6ae5d 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -33,8 +33,8 @@ // https://github.com/bigtreetech/BTT-Expansion-module/tree/master/BTT%20EXP-MOT //#define HAS_BTT_EXP_MOT 1 -#if BOTH(HAS_WIRED_LCD,HAS_BTT_EXP_MOT) - #if EITHER(CR10_STOCKDISPLAY,ENDER2_STOCKDISPLAY) +#if BOTH(HAS_WIRED_LCD, HAS_BTT_EXP_MOT) + #if EITHER(CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY) #define EXP_MOT_USE_EXP2_ONLY #else #error "Having a LCD that uses both EXP1/EXP2 and a expanion motor module on EXP1/EXP2 is not possible." @@ -129,56 +129,60 @@ #endif #if HAS_BTT_EXP_MOT -/* _____ _____ - * NC | · · | GND NC | · · | GND - * NC | · · | 1.31 (M1EN) (M2EN) 1.23 | · · | 1.22 (M3EN) - * (M1STP) 0.18 | · · 3.25 (M1DIR) (M1RX) 1.21 | · · 1.20 (M1DIAG) - * (M2DIR) 0.16 | · · | 3.26 (M2STP) (M2RX) 1.19 | · · | 1.18 (M2DIAG) - * (M3DIR) 0.15 | · · | 0.17 (M3STP) (M3RX) 0.28 | · · | 1.30 (M3DIAG) - * ----- ----- - * EXP2 EXP1 - * - * NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN - */ + + /** _____ _____ + * NC | · · | GND NC | · · | GND + * NC | · · | 1.31 (M1EN) (M2EN) 1.23 | · · | 1.22 (M3EN) + * (M1STP) 0.18 | · · 3.25 (M1DIR) (M1RX) 1.21 | · · 1.20 (M1DIAG) + * (M2DIR) 0.16 | · · | 3.26 (M2STP) (M2RX) 1.19 | · · | 1.18 (M2DIAG) + * (M3DIR) 0.15 | · · | 0.17 (M3STP) (M3RX) 0.28 | · · | 1.30 (M3DIAG) + * ----- ----- + * EXP2 EXP1 + * + * NB In EXP_MOT_USE_EXP2_ONLY mode EXP1 is not used and M2EN and M3EN need to be jumpered to M1EN + */ // M1 on Driver Expansion Module - #define E2_STEP_PIN EXPA2_05_PIN - #define E2_DIR_PIN EXPA2_06_PIN - #define E2_ENABLE_PIN EXPA2_04_PIN + #define E2_STEP_PIN EXPA2_05_PIN + #define E2_DIR_PIN EXPA2_06_PIN + #define E2_ENABLE_PIN EXPA2_04_PIN #ifndef EXP_MOT_USE_EXP2_ONLY - #define E2_DIAG_PIN EXPA1_06_PIN - #define E2_CS_PIN EXPA1_05_PIN + #define E2_DIAG_PIN EXPA1_06_PIN + #define E2_CS_PIN EXPA1_05_PIN #if HAS_TMC_UART - #define E2_SERIAL_TX_PIN EXPA1_05_PIN - #define E2_SERIAL_RX_PIN EXPA1_05_PIN + #define E2_SERIAL_TX_PIN EXPA1_05_PIN + #define E2_SERIAL_RX_PIN EXPA1_05_PIN #endif #endif + // M2 on Driver Expansion Module - #define E3_STEP_PIN EXPA2_08_PIN - #define E3_DIR_PIN EXPA2_07_PIN + #define E3_STEP_PIN EXPA2_08_PIN + #define E3_DIR_PIN EXPA2_07_PIN #ifndef EXP_MOT_USE_EXP2_ONLY - #define E3_ENABLE_PIN EXPA1_03_PIN - #define E3_DIAG_PIN EXPA1_08_PIN - #define E3_CS_PIN EXPA1_07_PIN + #define E3_ENABLE_PIN EXPA1_03_PIN + #define E3_DIAG_PIN EXPA1_08_PIN + #define E3_CS_PIN EXPA1_07_PIN #if HAS_TMC_UART - #define E3_SERIAL_TX_PIN EXPA1_07_PIN - #define E3_SERIAL_RX_PIN EXPA1_07_PIN + #define E3_SERIAL_TX_PIN EXPA1_07_PIN + #define E3_SERIAL_RX_PIN EXPA1_07_PIN #endif #else - #define E3_ENABLE_PIN EXPA2_04_PIN + #define E3_ENABLE_PIN EXPA2_04_PIN #endif + // M3 on Driver Expansion Module - #define E4_STEP_PIN EXPA2_10_PIN - #define E4_DIR_PIN EXPA2_09_PIN + #define E4_STEP_PIN EXPA2_10_PIN + #define E4_DIR_PIN EXPA2_09_PIN #ifndef EXP_MOT_USE_EXP2_ONLY - #define E4_ENABLE_PIN EXPA1_04_PIN - #define E4_DIAG_PIN EXPA1_10_PIN - #define E4_CS_PIN EXPA1_09_PIN + #define E4_ENABLE_PIN EXPA1_04_PIN + #define E4_DIAG_PIN EXPA1_10_PIN + #define E4_CS_PIN EXPA1_09_PIN #if HAS_TMC_UART - #define E4_SERIAL_TX_PIN EXPA1_09_PIN - #define E4_SERIAL_RX_PIN EXPA1_09_PIN + #define E4_SERIAL_TX_PIN EXPA1_09_PIN + #define E4_SERIAL_RX_PIN EXPA1_09_PIN #endif #else - #define E4_ENABLE_PIN EXPA2_04_PIN + #define E4_ENABLE_PIN EXPA2_04_PIN #endif + #endif // HAS_BTT_EXP_MOT diff --git a/Marlin/src/pins/ramps/pins_K8600.h b/Marlin/src/pins/ramps/pins_K8600.h index 60bb18204a..1a396b20f4 100644 --- a/Marlin/src/pins/ramps/pins_K8600.h +++ b/Marlin/src/pins/ramps/pins_K8600.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h index 4257b2c40e..0c79f108f7 100644 --- a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h +++ b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index a7c06cb99d..44be73029d 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h index 5b51ece07f..d51aaa956a 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V427.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h index 715fd89db8..f65e1d5474 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h @@ -1,9 +1,9 @@ /** * Marlin 3D Printer Firmware - * Copyright (C) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,7 +16,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * along with this program. If not, see . * */ diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h index e3065439d7..48943ad973 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -16,7 +16,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * along with this program. If not, see . * */ #pragma once diff --git a/platformio.ini b/platformio.ini index a8b81d755e..e2f1388efd 100644 --- a/platformio.ini +++ b/platformio.ini @@ -1355,10 +1355,10 @@ extra_scripts = ${common.extra_scripts} # MKS Robin Pro V2 # [env:mks_robin_pro2] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DHAL_HCD_MODULE_ENABLED -DUSBHOST -DARDUINO_BLACK_F407VE -board = genericSTM32F407VET6 +platform = ${common_stm32.platform} +extends = common_stm32 +build_flags = ${common_stm32.build_flags} -DHAL_HCD_MODULE_ENABLED -DUSBHOST -DARDUINO_BLACK_F407VE +board = genericSTM32F407VET6 board_build.core = stm32 board_build.variant = MARLIN_F407VE board_build.ldscript = ldscript.ld