From 87fbb8933016ebe7db64c019e0649bca7567e488 Mon Sep 17 00:00:00 2001 From: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com> Date: Sat, 19 Dec 2020 19:48:31 -0800 Subject: [PATCH] Let boards set Default TMC Slave Addresses (#20498) Co-authored-by: Scott Lahteine --- Marlin/Configuration_adv.h | 32 ++++++------- Marlin/src/inc/Conditionals_post.h | 48 +++++++++++++++++++ .../pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h | 14 ++++++ .../pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h | 22 +++++++-- Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h | 18 +++++-- Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h | 24 ++++++++-- buildroot/tests/STM32F103RC_btt-tests | 4 -- 7 files changed, 130 insertions(+), 32 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index aed29d0f2c..51c2b8f994 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -2473,22 +2473,22 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define Z4_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - #define E6_SLAVE_ADDRESS 0 - #define E7_SLAVE_ADDRESS 0 + //#define X_SLAVE_ADDRESS 0 + //#define Y_SLAVE_ADDRESS 0 + //#define Z_SLAVE_ADDRESS 0 + //#define X2_SLAVE_ADDRESS 0 + //#define Y2_SLAVE_ADDRESS 0 + //#define Z2_SLAVE_ADDRESS 0 + //#define Z3_SLAVE_ADDRESS 0 + //#define Z4_SLAVE_ADDRESS 0 + //#define E0_SLAVE_ADDRESS 0 + //#define E1_SLAVE_ADDRESS 0 + //#define E2_SLAVE_ADDRESS 0 + //#define E3_SLAVE_ADDRESS 0 + //#define E4_SLAVE_ADDRESS 0 + //#define E5_SLAVE_ADDRESS 0 + //#define E6_SLAVE_ADDRESS 0 + //#define E7_SLAVE_ADDRESS 0 /** * Software enable diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 3ce7043f4f..e9ea26aa7a 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -1647,6 +1647,54 @@ #ifndef E7_INTERPOLATE #define E7_INTERPOLATE INTERPOLATE #endif + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 0 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 0 + #endif + #ifndef X2_SLAVE_ADDRESS + #define X2_SLAVE_ADDRESS 0 + #endif + #ifndef Y2_SLAVE_ADDRESS + #define Y2_SLAVE_ADDRESS 0 + #endif + #ifndef Z2_SLAVE_ADDRESS + #define Z2_SLAVE_ADDRESS 0 + #endif + #ifndef Z3_SLAVE_ADDRESS + #define Z3_SLAVE_ADDRESS 0 + #endif + #ifndef Z4_SLAVE_ADDRESS + #define Z4_SLAVE_ADDRESS 0 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 0 + #endif + #ifndef E1_SLAVE_ADDRESS + #define E1_SLAVE_ADDRESS 0 + #endif + #ifndef E2_SLAVE_ADDRESS + #define E2_SLAVE_ADDRESS 0 + #endif + #ifndef E3_SLAVE_ADDRESS + #define E3_SLAVE_ADDRESS 0 + #endif + #ifndef E4_SLAVE_ADDRESS + #define E4_SLAVE_ADDRESS 0 + #endif + #ifndef E5_SLAVE_ADDRESS + #define E5_SLAVE_ADDRESS 0 + #endif + #ifndef E6_SLAVE_ADDRESS + #define E6_SLAVE_ADDRESS 0 + #endif + #ifndef E7_SLAVE_ADDRESS + #define E7_SLAVE_ADDRESS 0 + #endif #endif #if (HAS_E_DRIVER(TMC2660) \ diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h index 78751a6bac..a09da02e15 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h @@ -34,4 +34,18 @@ #define Y_HARDWARE_SERIAL MSerial4 #define Z_HARDWARE_SERIAL MSerial4 #define E0_HARDWARE_SERIAL MSerial4 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h index 8ed30bffb7..cc4bf46e15 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h @@ -49,13 +49,27 @@ #define CONTROLLER_FAN_PIN FAN1_PIN #endif -/** - * TMC220x stepper drivers - * Hardware serial communication ports. - */ #if HAS_TMC_UART + /** + * TMC220x stepper drivers + * Hardware serial communication ports + */ #define X_HARDWARE_SERIAL MSerial4 #define Y_HARDWARE_SERIAL MSerial4 #define Z_HARDWARE_SERIAL MSerial4 #define E0_HARDWARE_SERIAL MSerial4 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index aebb776b29..3919723f37 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -87,19 +87,30 @@ #define E0_ENABLE_PIN PC13 #if HAS_TMC_UART - /** * TMC2208/TMC2209 stepper drivers */ - // // Hardware serial with switch - // #define X_HARDWARE_SERIAL MSerial2 #define Y_HARDWARE_SERIAL MSerial2 #define Z_HARDWARE_SERIAL MSerial2 #define E0_HARDWARE_SERIAL MSerial2 + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 1 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 2 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif + // The 4xTMC2209 module doesn't have a serial multiplexer and // needs to set *_SLAVE_ADDRESS in Configuration_adv.h for X,Y,Z,E0 #if HAS_DRIVER(TMC2208) @@ -110,7 +121,6 @@ // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 - #endif // diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index b8a4ccf770..c978092ab2 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -80,10 +80,26 @@ #define E0_DIR_PIN PC14 #define E0_ENABLE_PIN PC13 -#define X_HARDWARE_SERIAL MSerial2 -#define Y_HARDWARE_SERIAL MSerial2 -#define Z_HARDWARE_SERIAL MSerial2 -#define E0_HARDWARE_SERIAL MSerial2 +#if HAS_TMC_UART + #define X_HARDWARE_SERIAL MSerial2 + #define Y_HARDWARE_SERIAL MSerial2 + #define Z_HARDWARE_SERIAL MSerial2 + #define E0_HARDWARE_SERIAL MSerial2 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 1 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 2 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif +#endif // // Heaters / Fans diff --git a/buildroot/tests/STM32F103RC_btt-tests b/buildroot/tests/STM32F103RC_btt-tests index 5d695c9296..0084f59a0c 100755 --- a/buildroot/tests/STM32F103RC_btt-tests +++ b/buildroot/tests/STM32F103RC_btt-tests @@ -17,10 +17,6 @@ opt_set X_DRIVER_TYPE TMC2209 opt_set Y_DRIVER_TYPE TMC2209 opt_set Z_DRIVER_TYPE TMC2209 opt_set E0_DRIVER_TYPE TMC2209 -opt_set X_SLAVE_ADDRESS 0 -opt_set Y_SLAVE_ADDRESS 1 -opt_set Z_SLAVE_ADDRESS 2 -opt_set E0_SLAVE_ADDRESS 3 opt_enable PINS_DEBUGGING exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"