andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Unify AVR90USB: Pins remap to Arduino

pull/1/head
Scott Lahteine 8 years ago
parent
b378deaf89
commit
87d8223251
8 changed files with 581 additions and 459 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 115
      Marlin/pins_5DPRINT.h
  2. 70
      Marlin/pins_BRAINWAVE.h
  3. 93
      Marlin/pins_BRAINWAVE_PRO.h
  4. 165
      Marlin/pins_PRINTRBOARD.h
  5. 162
      Marlin/pins_PRINTRBOARD_REVF.h
  6. 150
      Marlin/pins_SAV_MKI.h
  7. 124
      Marlin/pins_TEENSY2.h
  8. 161
      Marlin/pins_TEENSYLU.h

115
Marlin/pins_5DPRINT.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -20,6 +20,47 @@
* *
*/ */
/**
* Rev B 2 JUN 2017
*
* Converted to Arduino pin numbering
*/
/**
* There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
/** /**
* 5DPrint D8 Driver board pin assignments * 5DPrint D8 Driver board pin assignments
* *
@ -27,7 +68,7 @@
*/ */
#ifndef __AVR_AT90USB1286__ #ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif #endif
#define DEFAULT_MACHINE_NAME "Makibox" #define DEFAULT_MACHINE_NAME "Makibox"
@ -39,56 +80,54 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 37 #define X_STOP_PIN 37 // E5
#define Y_STOP_PIN 36 #define Y_STOP_PIN 36 // E4
#define Z_STOP_PIN 39 #define Z_STOP_PIN 19 // E7
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 0 #define X_STEP_PIN 28 // A0
#define X_DIR_PIN 1 #define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 23 #define X_ENABLE_PIN 17 // C7
#define Y_STEP_PIN 2 #define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 19 #define Y_ENABLE_PIN 13 // C3
#define Z_STEP_PIN 4 #define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 18 #define Z_ENABLE_PIN 12 // C2
#define E0_STEP_PIN 6 #define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 7 #define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 17 #define E0_ENABLE_PIN 11 // C1
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 25 #define X_MS1_PIN 25 // B5
#define X_MS2_PIN 26 #define X_MS2_PIN 26 // B6
#define Y_MS1_PIN 9 #define Y_MS1_PIN 9 // E1
#define Y_MS2_PIN 8 #define Y_MS2_PIN 8 // E0
#define Z_MS1_PIN 7 #define Z_MS1_PIN 7 // D7
#define Z_MS2_PIN 6 #define Z_MS2_PIN 6 // D6
#define E0_MS1_PIN 5 #define E0_MS1_PIN 5 // D5
#define E0_MS2_PIN 4 #define E0_MS2_PIN 4 // D4
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 1 // Analog Input #define TEMP_0_PIN 1 // F1 Analog Input
#define TEMP_BED_PIN 0 // Analog Input #define TEMP_BED_PIN 0 // F0 Analog Input
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 21 #define HEATER_0_PIN 15 // C5
#define HEATER_BED_PIN 20 #define HEATER_BED_PIN 14 // C4
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h #define FAN_PIN 16 // C6 PWM3A
// for the fan and Teensyduino uses a different pin mapping.
#define FAN_PIN 16
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 20 #define SDSS 20 // B0

70
Marlin/pins_BRAINWAVE.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -34,6 +34,12 @@
* allow this board to use the latest Marlin software * allow this board to use the latest Marlin software
*/ */
/**
* Rev C 2 JUN 2017
*
* Converted to Arduino pin numbering
*/
/** /**
* Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB * Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB
* This is the only known IDE extension that is compatible with the pin definitions * This is the only known IDE extension that is compatible with the pin definitions
@ -49,20 +55,20 @@
* https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json * https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json
* 2. Under Tools -> Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB * 2. Under Tools -> Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB
* and then click on "Install" * and then click on "Install"
* 3. Select "AT90USB646_STANDARD" from the 'Tools -> Boards' menu. * 3. Select "AT90USB646_TEENSYPP" from the 'Tools -> Boards' menu.
*/ */
/** /**
* To burn the bootloader that comes with Marlin_AT90USB: * To burn the bootloader that comes with Marlin_AT90USB:
* *
* 1. Connect your programmer to the board. * 1. Connect your programmer to the board.
* 2. In Arduino IDE select "AT90USB646_STANDARD" and then select the programmer. * 2. In Arduino IDE select "AT90USB646_TEENSYPP" and then select the programmer.
* 3. In Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. * 3. In Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it. * 4. The programmer is no longer needed. Remove it.
*/ */
#ifndef __AVR_AT90USB646__ #ifndef __AVR_AT90USB646__
#error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'AT90USB646_TEENSYPP' selected from the 'Tools -> Boards' menu."
#endif #endif
#define BOARD_NAME "Brainwave" #define BOARD_NAME "Brainwave"
@ -72,48 +78,48 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 7 #define X_STOP_PIN 35 // A7
#define Y_STOP_PIN 6 #define Y_STOP_PIN 34 // A6
#define Z_STOP_PIN 5 #define Z_STOP_PIN 33 // A5
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 27 #define X_STEP_PIN 3 // D3
#define X_DIR_PIN 29 #define X_DIR_PIN 5 // D5
#define X_ENABLE_PIN 28 #define X_ENABLE_PIN 4 // D4
#define X_ATT_PIN 26 #define X_ATT_PIN 2 // D2
#define Y_STEP_PIN 31 #define Y_STEP_PIN 7 // D7
#define Y_DIR_PIN 33 #define Y_DIR_PIN 9 // E1
#define Y_ENABLE_PIN 32 #define Y_ENABLE_PIN 8 // E0
#define Y_ATT_PIN 30 #define Y_ATT_PIN 6 // D6
#define Z_STEP_PIN 17 #define Z_STEP_PIN 11 // C1
#define Z_DIR_PIN 19 #define Z_DIR_PIN 13 // C3
#define Z_ENABLE_PIN 18 #define Z_ENABLE_PIN 12 // C2
#define Z_ATT_PIN 16 #define Z_ATT_PIN 10 // C0
#define E0_STEP_PIN 21 #define E0_STEP_PIN 15 // C5
#define E0_DIR_PIN 23 #define E0_DIR_PIN 17 // C7
#define E0_ENABLE_PIN 22 #define E0_ENABLE_PIN 16 // C6
#define E0_ATT_PIN 20 #define E0_ATT_PIN 14 // C4
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 7 // Analog Input #define TEMP_0_PIN 7 // F7 Analog Input
#define TEMP_BED_PIN 6 // Analog Input #define TEMP_BED_PIN 6 // F6 Analog Input
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 4 // Extruder #define HEATER_0_PIN 32 // A4 Extruder
#define HEATER_BED_PIN 38 // Bed #define HEATER_BED_PIN 18 // E6 Bed
#define FAN_PIN 3 // Fan #define FAN_PIN 31 // A3 Fan
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PIN 39 #define LED_PIN 19 // E7

93
Marlin/pins_BRAINWAVE_PRO.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -32,11 +32,16 @@
* *
* Added pointers to currently available Arduino IDE extensions that will * Added pointers to currently available Arduino IDE extensions that will
* allow this board to use the latest Marlin software * allow this board to use the latest Marlin software
*
*
* Rev C 2 JUN 2017
*
* Converted to Arduino pin numbering
*/ */
/** /**
* There are three Arduino IDE extensions that are compatible with this board * There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software. All have been used with Arduino 1.6.12 * and with the mainstream Marlin software.
* *
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
@ -45,8 +50,6 @@
* libraries - they are not used with the Marlin software. * libraries - they are not used with the Marlin software.
* *
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
* This is basically Teensyduino but with a bootloader that can handle image sizes
* larger than 64K.
* *
* Installation: * Installation:
* *
@ -54,43 +57,25 @@
* click on "Download ZIP" button. * click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the * 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably * hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino. * 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu. * 4. Select "Printrboard" from the 'Tools -> Boards' menu.
* *
* Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB * Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* Uses the bootloader from Printerboard above. * the Teensyduino bootloader on it.
*
* "Marlin_AT90USB" makes PWM0A available rather than the usual PWM1C. These PWMs share
* the same physical pin. Marlin uses TIMER1 to generate interrupts and sets it up such
* that PWM1A, PWM1B & PWM1C can't be used.
*
* Installation:
*
* 1. In the Arduino IDE, under Files -> Preferences paste the following URL
* https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json
* 2. Under Tools -> Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB
* and then click on "Install"
* 3. Select "AT90USB1286_TEENSYPP" from the 'Tools -> Boards' menu.
*/ */
/** /**
* To burn the bootloader that comes with Printrboard and Marlin_AT90USB: * To burn the bootloader that comes with Printrboard:
* *
* 1. Connect your programmer to the board. * 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" or "AT90USB1286_TEENSYPP" and then select the programmer. * 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it. * 4. The programmer is no longer needed. Remove it.
*/ */
#ifndef __AVR_AT90USB1286__ #ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0', 'AT90USB1286_TEENSYPP', or 'Printrboard' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif
#include "fastio.h"
#if DISABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
#error "Uncomment '#define AT90USBxx_TEENSYPP_ASSIGNMENTS' in fastio.h for this config"
#endif #endif
#define BOARD_NAME "Brainwave Pro" #define BOARD_NAME "Brainwave Pro"
@ -101,53 +86,53 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 47 #define X_STOP_PIN 45 // F7
#define Y_STOP_PIN 18 #define Y_STOP_PIN 12 // C2
#define Z_MAX_PIN 36 #define Z_STOP_PIN 36 // E4
// //
// Z Probe (when not Z_MIN_PIN) // Z Probe (when not Z_MIN_PIN)
// //
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 17 #define Z_MIN_PROBE_PIN 11 // C1
#endif #endif
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 33 #define X_STEP_PIN 9 // E1
#define X_DIR_PIN 32 #define X_DIR_PIN 8 // E0
#define X_ENABLE_PIN 11 #define X_ENABLE_PIN 23 // B3
#define Y_STEP_PIN 31 #define Y_STEP_PIN 7 // D7
#define Y_DIR_PIN 30 #define Y_DIR_PIN 6 // D6
#define Y_ENABLE_PIN 8 #define Y_ENABLE_PIN 20 // B0
#define Z_STEP_PIN 29 #define Z_STEP_PIN 5 // D5
#define Z_DIR_PIN 28 #define Z_DIR_PIN 4 // D4
#define Z_ENABLE_PIN 37 #define Z_ENABLE_PIN 37 // E5
#define E0_STEP_PIN 35 #define E0_STEP_PIN 47 // E3
#define E0_DIR_PIN 34 #define E0_DIR_PIN 46 // E2
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 25 // B5
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 2 // Analog Input #define TEMP_0_PIN 2 // F2 Analog Input
#define TEMP_1_PIN 1 // Analog Input #define TEMP_1_PIN 1 // F1 Analog Input
#define TEMP_BED_PIN 0 // Analog Input #define TEMP_BED_PIN 0 // F0 Analog Input
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 15 #define HEATER_0_PIN 27 // B7
#define HEATER_BED_PIN 14 // Bed #define HEATER_BED_PIN 26 // B6 Bed
#define FAN_PIN 16 // Fan, PWM #define FAN_PIN 16 // C6 Fan, PWM3A
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 20 #define SDSS 20 // B0
#define SD_DETECT_PIN 12 #define SD_DETECT_PIN 24 // B4
#define LED_PIN 19 #define LED_PIN 13 // C3

165
Marlin/pins_PRINTRBOARD.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -21,18 +21,48 @@
*/ */
/** /**
* Printrboard pin assignments (AT90USB1286) * Rev B 2 JUN 2017
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! *
* http://www.pjrc.com/teensy/teensyduino.html * Converted to Arduino pin numbering
* See http://reprap.org/wiki/Printrboard for more info
*/ */
#ifndef __AVR_AT90USB1286__ /**
#error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu." * There are two Arduino IDE extensions that are compatible with this board
#endif * and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional. /**
#error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h" * To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
#ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif #endif
#define BOARD_NAME "Printrboard" #define BOARD_NAME "Printrboard"
@ -46,32 +76,32 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 35 #define X_STOP_PIN 47 // E3
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define Y_STOP_PIN 37 // Move Ystop to Estop socket #define Y_STOP_PIN 37 // E5 - Move Ystop to Estop socket
#else #else
#define Y_STOP_PIN 8 // Ystop in Ystop socket #define Y_STOP_PIN 20 // B0 SS - Ystop in Ystop socket
#endif #endif
#define Z_STOP_PIN 36 #define Z_STOP_PIN 36 // E4
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 0 #define X_STEP_PIN 28 // A0
#define X_DIR_PIN 1 #define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 19 // E7
#define Y_STEP_PIN 2 #define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 18 // E6
#define Z_STEP_PIN 4 #define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 23 #define Z_ENABLE_PIN 17 // C7
#define E0_STEP_PIN 6 #define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 7 #define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 13 // C3
// //
// Temperature Sensors // Temperature Sensors
@ -82,76 +112,67 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_1_PIN 46 #define HEATER_1_PIN 44 // F6
#define HEATER_2_PIN 47 #define HEATER_2_PIN 45 // F7
#define HEATER_BED_PIN 20 #define HEATER_BED_PIN 14 // C4 PWM3C
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin
// fastio pin numbering otherwise #define FAN_PIN 16 // C6 PWM3A
#if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
#define FAN_PIN 22
#else
#define FAN_PIN 16
#endif
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 26 #define SDSS 20 // B0 SS
#define FILWIDTH_PIN 2 // Analog Input
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 2 // Analog Input
#endif
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// we have no buzzer installed // we have no buzzer installed
#define BEEPER_PIN -1 #define BEEPER_PIN -1
// LCD Pins // LCD Pins
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 // RX1 - fastio.h pin mapping 27 #define BTN_EN1 3 // D3 RX1 JP2-7
#define BTN_EN2 26 // TX1 - fastio.h pin mapping 26 #define BTN_EN2 2 // D2 TX1 JP2-5
#define BTN_ENC 43 // A3 - fastio.h pin mapping 43 #define BTN_ENC 41 // F3 JP2-4
#define SDSS 40 // use SD card on Panelolu2 (Teensyduino pin mapping) #define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2
#else #else
#define BTN_EN1 16 #define BTN_EN1 10 // C0 JP11-12
#define BTN_EN2 17 #define BTN_EN2 11 // C1 JP11-13
#define BTN_ENC 18 // the click #define BTN_ENC 12 // C2 JP11-14
#endif // LCD_I2C_PANELOLU2 #endif
// not connected to a pin // not connected
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#define LCD_PINS_RS 9 #define LCD_PINS_RS 9 // E1 JP11-11
#define LCD_PINS_ENABLE 8 #define LCD_PINS_ENABLE 8 // E0 JP11-10
#define LCD_PINS_D4 7 #define LCD_PINS_D4 7 // D7 JP11-8
#define LCD_PINS_D5 6 #define LCD_PINS_D5 6 // D6 JP11-7
#define LCD_PINS_D6 5 #define LCD_PINS_D6 5 // D5 JP11-6
#define LCD_PINS_D7 4 #define LCD_PINS_D7 4 // D4 JP11-5
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
// FastIO #define BEEPER_PIN 8 // E0 JP11-10
#define BEEPER_PIN 32
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 42 // Non-FastIO #define DOGLCD_A0 40 // F2 JP2-2
#define DOGLCD_CS 43 // Non-FastIO #define DOGLCD_CS 41 // F3 JP2-4
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
// The encoder and click button (FastIO Pins) // The encoder and click button
#define BTN_EN1 26 #define BTN_EN1 2 // D2 TX1 JP2-5
#define BTN_EN2 27 #define BTN_EN2 3 // D3 RX1 JP2-7
#define BTN_ENC 47 #define BTN_ENC 45 // F7 TDI JP2-12
#define SDSS 45 #define SDSS 43 // F5 TMS JP2-8
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SD_DETECT_PIN -1
#define STAT_LED_RED_PIN 12 // Non-FastIO #define STAT_LED_RED_PIN 12 // C2 JP11-14
#define STAT_LED_BLUE_PIN 10 // Non-FastIO #define STAT_LED_BLUE_PIN 10 // C0 JP11-12
#endif #endif

162
Marlin/pins_PRINTRBOARD_REVF.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -21,18 +21,48 @@
*/ */
/** /**
* Printrboard pin assignments (AT90USB1286) * Rev B 2 JUN 2017
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! *
* http://www.pjrc.com/teensy/teensyduino.html * Converted to Arduino pin numbering
* See http://reprap.org/wiki/Printrboard for more info
*/ */
#ifndef __AVR_AT90USB1286__ /**
#error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu." * There are two Arduino IDE extensions that are compatible with this board
#endif * and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional. /**
#error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h" * To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
#ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif #endif
#define BOARD_NAME "Printrboard Rev F" #define BOARD_NAME "Printrboard Rev F"
@ -41,28 +71,28 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 35 #define X_STOP_PIN 47 // E3
#define Y_STOP_PIN 12 #define Y_STOP_PIN 24 // B4 PWM2A
#define Z_STOP_PIN 36 #define Z_STOP_PIN 36 // E4
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 0 #define X_STEP_PIN 28 // A0
#define X_DIR_PIN 1 #define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 19 // E7
#define Y_STEP_PIN 2 #define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 18 // E6
#define Z_STEP_PIN 4 #define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 23 #define Z_ENABLE_PIN 17 // C7
#define E0_STEP_PIN 6 #define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 7 #define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 13 // C3
// uncomment to enable an I2C based DAC like on the Printrboard REVF // uncomment to enable an I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT #define DAC_STEPPER_CURRENT
@ -72,7 +102,7 @@
#define DAC_STEPPER_SENSE 0.11 #define DAC_STEPPER_SENSE 0.11
#define DAC_STEPPER_ADDRESS 0 #define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 3520 #define DAC_STEPPER_MAX 3520
#define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V #define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V
#define DAC_STEPPER_GAIN 0 #define DAC_STEPPER_GAIN 0
#define DAC_OR_ADDRESS 0x00 #define DAC_OR_ADDRESS 0x00
@ -85,68 +115,52 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_1_PIN 46 #define HEATER_1_PIN 44 // F6
#define HEATER_2_PIN 47 #define HEATER_2_PIN 45 // F7
#define HEATER_BED_PIN 20 #define HEATER_BED_PIN 14 // C4 PWM3C
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin #define FAN_PIN 16 // C6 PWM3A
// fastio pin numbering otherwise
#if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
#define FAN_PIN 22
#else
#define FAN_PIN 16
#endif
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 20 // Teensylu pin mapping #define SDSS 20 // B0 SS
#define FILWIDTH_PIN 2 // Analog Input
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 2 // Analog Input
#endif
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define LCD_PINS_RS 9 #define LCD_PINS_RS 9 // E1 JP11-11
#define LCD_PINS_ENABLE 8 #define LCD_PINS_ENABLE 8 // E0 JP11-10
#define LCD_PINS_D4 7 #define LCD_PINS_D4 7 // D7 JP11-8
#define LCD_PINS_D5 6 #define LCD_PINS_D5 6 // D6 JP11-7
#define LCD_PINS_D6 5 #define LCD_PINS_D6 5 // D5 JP11-6
#define LCD_PINS_D7 4 #define LCD_PINS_D7 4 // D4 JP11-5
#define BTN_EN1 16 #define BTN_EN1 10 // C0 JP11-12
#define BTN_EN2 17 #define BTN_EN2 11 // C1 JP11-13
#define BTN_ENC 18 // the click #define BTN_ENC 12 // C2 JP11-14
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
// encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif #endif
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 32 // FastIO #define BEEPER_PIN 8 // E0 JP11-10
#define DOGLCD_A0 42 // Non-FastIO #define DOGLCD_A0 40 // F2 JP2-2
#define DOGLCD_CS 43 // Non-FastIO #define DOGLCD_CS 41 // F3 JP2-4
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
// (FastIO Pins) #define BTN_EN1 2 // D2 TX1 JP2-5
#define BTN_EN1 26 #define BTN_EN2 3 // D3 RX1 JP2-7
#define BTN_EN2 27 #define BTN_ENC 45 // F7 TDI JP2-12
#define BTN_ENC 47
#define SDSS 45 #define SDSS 43 // F5 TMS JP2-8
#define SD_DETECT_PIN -1 // FastIO (Manual says 72) #define SD_DETECT_PIN -1
#define STAT_LED_RED_PIN 12 // Non-FastIO #define STAT_LED_RED_PIN 12 // C2 JP11-14
#define STAT_LED_BLUE_PIN 10 // Non-FastIO #define STAT_LED_BLUE_PIN 10 // C0 JP11-12
#endif #endif

150
Marlin/pins_SAV_MKI.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -21,14 +21,48 @@
*/ */
/** /**
* SAV MkI pin assignments (AT90USB1286) * Rev B 2 JUN 2017
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! *
* http://www.pjrc.com/teensy/teensyduino.html * Converted to Arduino pin numbering
* RepRap Clone Wars project board. */
/**
* There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/ */
#ifndef __AVR_AT90USB1286__ #ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif #endif
#define DEFAULT_MACHINE_NAME "SAV MkI" #define DEFAULT_MACHINE_NAME "SAV MkI"
@ -41,54 +75,54 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp) #define SERVO0_PIN 39 // F1 In teensy's pin definition for pinMode (in servo.cpp)
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 13 #define X_STOP_PIN 25 // B5
#define Y_STOP_PIN 14 #define Y_STOP_PIN 26 // B6
//#define Z_STOP_PIN 15 //#define Z_STOP_PIN 27 // B7
#define Z_STOP_PIN 36 // For inductive sensor. #define Z_STOP_PIN 36 // E4 For inductive sensor.
//#define E_STOP_PIN 36 // E4
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 0 #define X_STEP_PIN 28 // A0
#define X_DIR_PIN 1 #define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 19 // E7
#define Y_STEP_PIN 2 #define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 18 // E6
#define Z_STEP_PIN 4 #define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 23 #define Z_ENABLE_PIN 17 // C7
#define E0_STEP_PIN 6 #define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 7 #define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 13 // C3
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 7 // Analog Input (Extruder) #define TEMP_0_PIN 7 // F7 Analog Input (Extruder)
#define TEMP_BED_PIN 6 // Analog Input (Bed) #define TEMP_BED_PIN 6 // F6 Analog Input (Bed)
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 14 // C4 PWM3C - Bed
#define FAN_PIN 16 // Fan -- from Teensyduino environment. #define FAN_PIN 16 // C6 PWM3A
// For the fan and Teensyduino uses a different pin mapping.
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 20 // PB0 - 8 in marlin env. #define SDSS 20 // B0
// Extension header pin mapping // Extension header pin mapping
// ---------------------------- // ----------------------------
@ -99,21 +133,21 @@
// PWM-D24 A4 (An), IO // PWM-D24 A4 (An), IO
// 5V GND // 5V GND
// 12V GND // 12V GND
#define EXT_AUX_SCL_D0 0 // 0 (teensy), 24 (marlin) #define EXT_AUX_SCL_D0 0 // D0 PWM0B
#define EXT_AUX_SDA_D1 1 // 1 (teensy), 25 (marlin) #define EXT_AUX_SDA_D1 1 // D1
#define EXT_AUX_RX1_D2 26 // 2 (teensy), 26 (marlin) #define EXT_AUX_RX1_D2 2 // D2
#define EXT_AUX_TX1_D3 27 // 3 (teensy), 27 (marlin) #define EXT_AUX_TX1_D3 3 // D3
#define EXT_AUX_PWM_D24 12 // 24 (teensy), 12 (marlin) #define EXT_AUX_PWM_D24 24 // B4 PWM2A
#define EXT_AUX_A0 0 // Analog #define EXT_AUX_A0 0 // F0 Analog Input
#define EXT_AUX_A0_IO 40 // Digital IO, 38 (teensy), 40 (marlin) #define EXT_AUX_A0_IO 38 // F0 Digital IO
#define EXT_AUX_A1 1 // Analog #define EXT_AUX_A1 1 // F1 Analog Input
#define EXT_AUX_A1_IO 41 // Digital IO, 39 (teensy), 41 (marlin) #define EXT_AUX_A1_IO 39 // F1 Digital IO
#define EXT_AUX_A2 2 // Analog #define EXT_AUX_A2 2 // F2 Analog Input
#define EXT_AUX_A2_IO 42 // Digital IO, 40 (teensy), 42 (marlin) #define EXT_AUX_A2_IO 40 // F2 Digital IO
#define EXT_AUX_A3 3 // Analog #define EXT_AUX_A3 3 // F3 Analog Input
#define EXT_AUX_A3_IO 43 // Digital IO, 41 (teensy), 43 (marlin) #define EXT_AUX_A3_IO 41 // F3 Digital IO
#define EXT_AUX_A4 4 // Analog #define EXT_AUX_A4 4 // F4 Analog Input
#define EXT_AUX_A4_IO 44 // Digital IO, 42 (teensy), 44 (marlin) #define EXT_AUX_A4_IO 42 // F4 Digital IO
// //
// LCD / Controller // LCD / Controller
@ -128,28 +162,28 @@
#if ENABLED(SAV_3DLCD) #if ENABLED(SAV_3DLCD)
// For LCD SHIFT register LCD // For LCD SHIFT register LCD
#define SR_DATA_PIN EXT_AUX_SDA_D1 #define SR_DATA_PIN EXT_AUX_SDA_D1
#define SR_CLK_PIN EXT_AUX_SCL_D0 #define SR_CLK_PIN EXT_AUX_SCL_D0
#endif // SAV_3DLCD #endif
#if ENABLED(SAV_3DLCD) || ENABLED(SAV_3DGLCD) #if ENABLED(SAV_3DLCD) || ENABLED(SAV_3DGLCD)
#define BTN_EN1 EXT_AUX_A1_IO #define BTN_EN1 EXT_AUX_A1_IO
#define BTN_EN2 EXT_AUX_A0_IO #define BTN_EN2 EXT_AUX_A0_IO
#define BTN_ENC EXT_AUX_PWM_D24 #define BTN_ENC EXT_AUX_PWM_D24
#define KILL_PIN EXT_AUX_A2_IO #define KILL_PIN EXT_AUX_A2_IO
#define HOME_PIN EXT_AUX_A4_IO #define HOME_PIN EXT_AUX_A4_IO
#else // Try to use the expansion header for spindle control #else // Use the expansion header for spindle control
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 24 // 12 AT90USB… pin # #define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A
#define SPINDLE_LASER_ENABLE_PIN 39 // Pin should have a pullup! 41 AT90USB… pin # #define SPINDLE_LASER_ENABLE_PIN 39 // F1 Pin should have a pullup!
#define SPINDLE_DIR_PIN 40 // 42 AT90USB… pin # #define SPINDLE_DIR_PIN 40 // F2
#define CASE_LIGHT_PIN 0 // 24 AT90USB… pin # #define CASE_LIGHT_PIN 0 // D0 PWM0B
#endif #endif

124
Marlin/pins_TEENSY2.h
View File

@ -1,6 +1,6 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@ -20,13 +20,54 @@
* *
*/ */
/**
* Rev B 2 JUN 2017
*
* Converted to Arduino pin numbering
*/
/**
* There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
/** /**
* Teensy++ 2.0 Breadboard pin assignments (AT90USB1286) * Teensy++ 2.0 Breadboard pin assignments (AT90USB1286)
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! * Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
* http://www.pjrc.com/teensy/teensyduino.html * http://www.pjrc.com/teensy/teensyduino.html
* See http://reprap.org/wiki/Printrboard for more info * See http://reprap.org/wiki/Printrboard for more info
* *
* CLI build: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make * CLI build: HARDWARE_MOTHERBOARD=84 make
* *
* DaveX plan for Teensylu/printrboard-type pinouts for a TeensyBreadboard: * DaveX plan for Teensylu/printrboard-type pinouts for a TeensyBreadboard:
* (ref teensylu & sprinter) * (ref teensylu & sprinter)
@ -66,12 +107,7 @@
*/ */
#ifndef __AVR_AT90USB1286__ #ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif
#if DISABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
#error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
// (or build from command line)
#endif #endif
#define BOARD_NAME "Teensy++2.0" #define BOARD_NAME "Teensy++2.0"
@ -82,68 +118,68 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN 2 #define X_STOP_PIN 2 // D2
#define Y_STOP_PIN 3 #define Y_STOP_PIN 3 // D3
#define Z_STOP_PIN 4 #define Z_STOP_PIN 4 // D4
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 28 // 0 Marlin #define X_STEP_PIN 28 // A0 Marlin
#define X_DIR_PIN 29 // 1 Marlin #define X_DIR_PIN 29 // A1 Marlin
#define X_ENABLE_PIN 26 #define X_ENABLE_PIN 26 // B6
#define Y_STEP_PIN 30 // 2 Marlin #define Y_STEP_PIN 30 // A2 Marlin
#define Y_DIR_PIN 31 // 3 #define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 26 // Shared w/x #define Y_ENABLE_PIN 26 // B6 Shared w/x
#define Z_STEP_PIN 32 // 4 #define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 33 // 5 #define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 26 // Shared w/x #define Z_ENABLE_PIN 26 // B6 Shared w/x
#define E0_STEP_PIN 34 // 6 #define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 35 // 7 #define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 26 // Shared w/x #define E0_ENABLE_PIN 26 // B6 Shared w/x
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 7 // Analog Input (Extruder) #define TEMP_0_PIN 7 // F7 Analog Input (Extruder)
#define TEMP_BED_PIN 6 // Analog Input (Bed) #define TEMP_BED_PIN 6 // F6 Analog Input (Bed)
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 15 // 21 // Extruder #define HEATER_0_PIN 15 // C5 PWM3B Extruder
#define HEATER_BED_PIN 14 // 20 // Bed #define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // 22 // Fan #define FAN_PIN 16 // C6 PWM3A Fan
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 20 // 8 #define SDSS 20 // B0
#define LED_PIN 6 #define LED_PIN 6 // D6
#define PS_ON_PIN 27 #define PS_ON_PIN 27 // B7
#define CASE_LIGHT_PIN 1 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 1 // D1 PWM2B MUST BE HARDWARE PWM
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define LCD_PINS_RS 8 #define LCD_PINS_RS 8 // E0
#define LCD_PINS_ENABLE 9 #define LCD_PINS_ENABLE 9 // E1
#define LCD_PINS_D4 10 #define LCD_PINS_D4 10 // C0
#define LCD_PINS_D5 11 #define LCD_PINS_D5 11 // C1
#define LCD_PINS_D6 12 #define LCD_PINS_D6 12 // C2
#define LCD_PINS_D7 13 #define LCD_PINS_D7 13 // C3
#define BTN_EN1 38 #define BTN_EN1 38 // F0
#define BTN_EN2 39 #define BTN_EN2 39 // F1
#define BTN_ENC 40 #define BTN_ENC 40 // F2
#endif #endif
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 5 // D5 Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 0 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 7 #define SPINDLE_DIR_PIN 7 // D7

161
Marlin/pins_TEENSYLU.h
View File

@ -21,54 +21,46 @@
*/ */
/** /**
* rev B 30 DEC 2016 * Rev C 2 JUN 2017
* *
* The original version of this file did NOT result in a useful program because: * Converted to Arduino pin numbering
* 1. The pin numbers assumed that the "#define AT90USBxx_TEENSYPP_ASSIGNMENTS" line */
* in FASTIO.h was commented out. There wasn't an Arduino IDE 1.6.x extension/package
* that supported this pin map so the latest Marlin wouldn't compile. /**
* 2. The silkscreen for the four end stops don't agree with the schematic. Activating * There are two Arduino IDE extensions that are compatible with this board
* the X endstop would tell the software that the Y endstop just went active. * and with the mainstream Marlin software. All have been used with Arduino 1.6.12
* 3. The thermistor inputs also had heater names assigned to them. The result was *
* thermistor inputs that were set to digital outputs. * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
* *
* Rev B corrects the above problems by: * Installation instructions are at the above URL. Don't bother loading the
* 1. The "Marlin_AT90USB" extension/package was developed. This extension enables the * libraries - they are not used with the Marlin software.
* latest Marlin software to compile using Arduino IDE 1.6.x and 1.80.
* 2. The endstop pin numbers in this file were changed to match the silkscreen. This
* makes it a little confusing when trying to correlate the schematic with the pin
* numbers used in this file.
* 3. The offending heater names were deleted.
* *
* To create a useable image for Teensylu do the following: * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
* a) Install the Marlin_AT90USB extension with either of the following methods: * This is basically Teensyduino but with a bootloader that can handle image sizes
* Automatic - paste this URL into preferences and then use Boards manager * larger than 64K.
* https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json
* Manual:
* 1. Copy the following URL into Go to "https://github.com/Bob-the-Kuhn/Marlin_AT90USB",
* click on the "Clone or Download" button and then click on "Download ZIP" button.
* 2. Unzip the file, find the "Marlin_AT90USB" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably be
* located in a path similar to this: C:\Program Files (x86)\Arduino\hardware
* b) Connect the USBtinyISP to the board.
* c) In the Arduino IDE select the "AT90USB1286_STANDARD" board in the of the "Marlin_AT90USB"
* section and select the "USBtinyISP" programmer.
* d) In the Arduino IDE click on "burn bootloader". Don't worry about the "verify
* failed at 1F000" error message.
* e) The USBtinyISP programmer is no longer needed. Remove it.
* f) In FASTIO.h comment out the "#define AT90USBxx_TEENSYPP_ASSIGNMENTS" line.
* g) To upload a sketch do the following:
* 1. remove the jumper
* 2. press reset
* 3. click on the "upload" button in the Arduino IDE
* 4. wait until the upload finishes (less than a minute)
* 5. put the jumper back on
* 6. press the reset button
* *
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
* *
* NOTE - the "Marlin_AT90USB" pin maps make PWM0A available rather than the usual PWM1C. * 1. Connect your programmer to the board.
* These PWMs share the same physical pin. Marlin uses TIMER1 to generate * 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* interrupts and sets it up such that PWM1A, PWM1B & PWM1C can't be used. * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/ */
/** /**
@ -81,13 +73,8 @@
* The pin assignments in this file match the silkscreen. * The pin assignments in this file match the silkscreen.
*/ */
#if !defined(__AVR_AT90USB1286__) && !defined(__AVR_AT90USB1286P__) #if !defined(__AVR_AT90USB1286__) && !defined(__AVR_AT90USB1286P__)
#error "Oops! Make sure you have 'AT90USB1286_STANDARD' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS)
#error "please disable (comment out) the AT90USBxx_TEENSYPP_ASSIGNMENTS flag in FASTIO.h "
#endif #endif
#define BOARD_NAME "Teensylu" #define BOARD_NAME "Teensylu"
@ -97,60 +84,60 @@
// //
// Limit Switche definitions that match the SCHEMATIC // Limit Switch definitions that match the SCHEMATIC
// //
//#define X_STOP_PIN 13 //#define X_STOP_PIN 25 // B5
//#define Y_STOP_PIN 14 //#define Y_STOP_PIN 26 // B6
//#define Z_STOP_PIN 15 //#define Z_STOP_PIN 27 // B7
//#define E_STOP_PIN 36 //#define E_STOP_PIN 36 // E4
// //
// Limit Switch definitions that match the SILKSCREEN // Limit Switch definitions that match the SILKSCREEN
// //
#define X_STOP_PIN 14 #define X_STOP_PIN 26 // B6
#define Y_STOP_PIN 15 #define Y_STOP_PIN 27 // B7
#define Z_STOP_PIN 36 #define Z_STOP_PIN 36 // E4
//#define E_STOP_PIN 13 //#define E_STOP_PIN 25 // B5
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 0 #define X_STEP_PIN 28 // A0
#define X_DIR_PIN 1 #define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 19 // E7
#define Y_STEP_PIN 2 #define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 18 // E6
#define Z_STEP_PIN 4 #define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 23 #define Z_ENABLE_PIN 17 // C7
#define E0_STEP_PIN 6
#define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19
#define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 13 // C3
//
// Temperature Sensors // Temperature Sensors
//
#define TEMP_0_PIN 7 // Analog Input (Extruder) #define TEMP_0_PIN 7 // Analog Input (Extruder)
#define TEMP_BED_PIN 6 // Analog Input (Bed) #define TEMP_BED_PIN 6 // Analog Input (Bed)
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_BED_PIN 20 #define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 22 #define FAN_PIN 16 // C6 PWM3A
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 8 #define SDSS 20 // B0 JP31-6
#define CASE_LIGHT_PIN 24 #define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B
// //
// LCD / Controller // LCD / Controller
@ -160,11 +147,11 @@
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 #define BTN_EN1 3 // D3 IO-8
#define BTN_EN2 26 #define BTN_EN2 2 // D2 IO-10
#define BTN_ENC 43 #define BTN_ENC 41 // F3 IO-7
#define SDSS 40 // use SD card on Panelolu2 #define SDSS 38 // F0 IO-13 use SD card on Panelolu2
#endif // LCD_I2C_PANELOLU2 #endif
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
@ -173,6 +160,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 24 // B4 IO-3 PWM2A - MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 39 // F1 IO-11 - Pin should have a pullup!
#define SPINDLE_DIR_PIN 42 #define SPINDLE_DIR_PIN 40 // F2 IO-9

Write Preview
Loading…
Cancel
Save