diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 996100182f..7b5fdad7a9 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -922,6 +922,10 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z //#define ENABLE_LEVELING_FADE_HEIGHT + + // Set the boundaries for probing (where the probe can reach). + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) @@ -931,8 +935,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 0bf14708d3..e48cceb504 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -920,6 +920,10 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z //#define ENABLE_LEVELING_FADE_HEIGHT + + // Set the boundaries for probing (where the probe can reach). + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) @@ -929,8 +933,6 @@ #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index bb769b1729..0cbd2dbb66 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -926,6 +926,10 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z //#define ENABLE_LEVELING_FADE_HEIGHT + + // Set the boundaries for probing (where the probe can reach). + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) @@ -935,8 +939,6 @@ #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 25) #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index b8038252eb..b1f834b6ae 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -989,6 +989,10 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z //#define ENABLE_LEVELING_FADE_HEIGHT + + // Set the boundaries for probing (where the probe can reach). + #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) + #endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) @@ -998,8 +1002,6 @@ #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10) #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS) #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS #define FRONT_PROBE_BED_POSITION - (DELTA_PROBEABLE_RADIUS - 20) diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index ce1d914120..4b34b8f96d 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -135,9 +135,12 @@ * a subsequent G or T leveling operation for backward compatibility. * * P1 Phase 1 Invalidate entire Mesh and continue with automatic generation of the Mesh data using - * the Z-Probe. Depending upon the values of DELTA_PROBEABLE_RADIUS and - * DELTA_PRINTABLE_RADIUS some area of the bed will not have Mesh Data automatically - * generated. This will be handled in Phase 2. If the Phase 1 command is given the + * the Z-Probe. Usually the probe can not reach all areas that the nozzle can reach. + * In Cartesian printers, mesh points within the X_OFFSET_FROM_EXTRUDER and Y_OFFSET_FROM_EXTRUDER + * area can not be automatically probed. For Delta printers the area in which DELTA_PROBEABLE_RADIUS + * and DELTA_PRINTABLE_RADIUS do not overlap will not be automatically probed. + * + * These points will be handled in Phase 2 and Phase 3. If the Phase 1 command is given the * C (Continue) parameter it does not invalidate the Mesh prior to automatically * probing needed locations. This allows you to invalidate portions of the Mesh but still * use the automatic probing capabilities of the Unified Bed Leveling System. An X and Y @@ -254,13 +257,13 @@ * to reconstruct the current mesh on another machine. * * T Topology Display the Mesh Map Topology. - * 'T' can be used alone (e.g., G29 T) or in combination with some of the other commands. - * This option works with all Phase commands (e.g., G29 P4 R 5 X 50 Y100 C -.1 O) + * 'T' can be used alone (e.g., G29 T) or in combination with most of the other commands. + * This option works with all Phase commands (e.g., G29 P4 R 5 T X 50 Y100 C -.1 O) * This parameter can also specify a Map Type. T0 (the default) is user-readable. T1 can * is suitable to paste into a spreadsheet for a 3D graph of the mesh. * * U Unlevel Perform a probe of the outer perimeter to assist in physically leveling unlevel beds. - * Only used for G29 P1 O U. This speeds up the probing of the edge of the bed. Useful + * Only used for G29 P1 T U. This speeds up the probing of the edge of the bed. Useful * when the entire bed doesn't need to be probed because it will be adjusted. * * V # Verbosity Set the verbosity level (0-4) for extra details. (Default 0) @@ -317,11 +320,19 @@ return; } - // Don't allow auto-leveling without homing first + // Check for commands that require the printer to be homed. if (axis_unhomed_error()) { - if (code_seen('P') && !code_seen('P6') || code_seen('J')) { + if (code_seen('J')) home_all_axes(); - } + else + if (code_seen('P')) { + int p_val; + if (code_has_value()) { + p_val = code_value_int(); + if ( p_val==1 || p_val==2 || p_val==4 ) + home_all_axes(); + } + } } if (g29_parameter_parsing()) return; // abort if parsing the simple parameters causes a problem,