From 85512e93724b3701915c92840106003efacf2dd7 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 30 May 2016 17:06:50 -0700
Subject: [PATCH] Drop FORCE_INLINE from temperature.h

`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
---
 Marlin/temperature.h | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/Marlin/temperature.h b/Marlin/temperature.h
index da5c01f3d3..cb57107578 100644
--- a/Marlin/temperature.h
+++ b/Marlin/temperature.h
@@ -112,9 +112,9 @@ class Temperature {
 
     #if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
       static float extrude_min_temp;
-      static FORCE_INLINE bool tooColdToExtrude(uint8_t e) { return degHotend(e) < extrude_min_temp; }
+      static bool tooColdToExtrude(uint8_t e) { return degHotend(e) < extrude_min_temp; }
     #else
-      static FORCE_INLINE bool tooColdToExtrude(uint8_t e) { UNUSED(e); return false; }
+      static bool tooColdToExtrude(uint8_t e) { UNUSED(e); return false; }
     #endif
 
   private:
@@ -230,16 +230,16 @@ class Temperature {
     //inline so that there is no performance decrease.
     //deg=degreeCelsius
 
-    static FORCE_INLINE float degHotend(uint8_t extruder) { return current_temperature[extruder]; }
-    static FORCE_INLINE float degBed() { return current_temperature_bed; }
+    static float degHotend(uint8_t extruder) { return current_temperature[extruder]; }
+    static float degBed() { return current_temperature_bed; }
 
     #if ENABLED(SHOW_TEMP_ADC_VALUES)
-    static FORCE_INLINE float rawHotendTemp(uint8_t extruder) { return current_temperature_raw[extruder]; }
-    static FORCE_INLINE float rawBedTemp() { return current_temperature_bed_raw; }
+    static float rawHotendTemp(uint8_t extruder) { return current_temperature_raw[extruder]; }
+    static float rawBedTemp() { return current_temperature_bed_raw; }
     #endif
 
-    static FORCE_INLINE float degTargetHotend(uint8_t extruder) { return target_temperature[extruder]; }
-    static FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
+    static float degTargetHotend(uint8_t extruder) { return target_temperature[extruder]; }
+    static float degTargetBed() { return target_temperature_bed; }
 
     #if ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0
       static void start_watching_heater(int e = 0);
@@ -249,25 +249,25 @@ class Temperature {
       static void start_watching_bed();
     #endif
 
-    static FORCE_INLINE void setTargetHotend(const float& celsius, uint8_t extruder) {
+    static void setTargetHotend(const float& celsius, uint8_t extruder) {
       target_temperature[extruder] = celsius;
       #if ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0
         start_watching_heater(extruder);
       #endif
     }
 
-    static FORCE_INLINE void setTargetBed(const float& celsius) {
+    static void setTargetBed(const float& celsius) {
       target_temperature_bed = celsius;
       #if ENABLED(THERMAL_PROTECTION_BED) && WATCH_BED_TEMP_PERIOD > 0
         start_watching_bed();
       #endif
     }
 
-    static FORCE_INLINE bool isHeatingHotend(uint8_t extruder) { return target_temperature[extruder] > current_temperature[extruder]; }
-    static FORCE_INLINE bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; }
+    static bool isHeatingHotend(uint8_t extruder) { return target_temperature[extruder] > current_temperature[extruder]; }
+    static bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; }
 
-    static FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { return target_temperature[extruder] < current_temperature[extruder]; }
-    static FORCE_INLINE bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
+    static bool isCoolingHotend(uint8_t extruder) { return target_temperature[extruder] < current_temperature[extruder]; }
+    static bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; }
 
     /**
      * The software PWM power for a heater
@@ -291,7 +291,7 @@ class Temperature {
      */
     static void updatePID();
 
-    static FORCE_INLINE void autotempShutdown() {
+    static void autotempShutdown() {
       #if ENABLED(AUTOTEMP)
         if (planner.autotemp_enabled) {
           planner.autotemp_enabled = false;
@@ -303,7 +303,7 @@ class Temperature {
 
     #if ENABLED(BABYSTEPPING)
 
-      static FORCE_INLINE void babystep_axis(AxisEnum axis, int distance) {
+      static void babystep_axis(AxisEnum axis, int distance) {
         #if ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ)
           #if ENABLED(BABYSTEP_XY)
             switch (axis) {