diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 0721b4134b..83d45b001d 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1621,7 +1621,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 0721b4134b..83d45b001d 100755
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1621,7 +1621,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 704793a586..afbc0d2803 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
index ac219c4690..81037e2d77 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
index ac219c4690..81037e2d77 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index a25231976a..b611f1a1bc 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 89505e8cfc..2b27265e8b 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b05d646230..2471d9cae0 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
index e42efcfbfd..bc3ca561ae 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 364c311394..34749d2d1e 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index ce77ab2327..2749d951dc 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1628,7 +1628,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 364c311394..34749d2d1e 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 9fa92f2bab..c0ffd3bf71 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index e1881e038d..66b4e622b4 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1623,7 +1623,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index da7f48ae91..28b2ed2bf3 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index 15f4456b5c..7c6a6fa661 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
index 4ed64a910d..194d914983 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
index f04d9bcb2a..bf94bb4cb8 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
index 58db3d4b5a..e35e8c3c7b 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
index ddc36892ea..72e94d0006 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
index f3349be617..3e1f97aac8 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 51d34961de..839b50d853 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 26401fee1c..41e939d57e 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
index 36ae0174ca..d735e22f33 100644
--- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 0c62cbe1f1..76b2e5f222 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1624,7 +1624,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 74443c484c..0d2094d3f7 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1625,7 +1625,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index d5e2a810ad..eb6752cf9f 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index d5e2a810ad..eb6752cf9f 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 6c90d06d53..229e92da67 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index f5758ef16e..fa9266d777 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 778969447d..d35ef2932e 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index abcc4bf15b..ceee680a86 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index ecb01a1b18..03c39ed3a6 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 98f1609002..3acc11dc13 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index eebd9d5072..c32f278c03 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1628,7 +1628,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 743c74f864..e839fda145 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 60f676db6a..ca1c521580 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index 07bf9761c2..fd4ee516f7 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index ef82d3fbe9..967bd0c591 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index ad07176bb3..bc86e1a39a 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
index 62d395d3a9..42694dbcd8 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index b31429b925..177dbb8e55 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 9c477bddbf..835e6917bf 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1633,7 +1633,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 65edb1620f..36c4dc41c3 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index ace05fd149..94c053cac4 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
index 7a97cfaaca..ddeda85edf 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -25,8 +25,10 @@
  */
 // normal size or plus?
 //#define ANYCUBIC_KOSSEL_PLUS
+
 // Anycubic Probe version 1 or 2 see README.md; 0 for no probe
 #define ANYCUBIC_PROBE_VERSION 0
+
 // Heated Bed:
 // 0 ... no heated bed
 // 1 ... aluminium heated bed with "BuildTak-like" sticker
@@ -992,11 +994,11 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0     // Y offset: -front +behind [the nozzle]
 
 #if ANYCUBIC_PROBE_VERSION == 2
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8     // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8  // Z offset: -below +above  [the nozzle]
 #elif ANYCUBIC_PROBE_VERSION == 1
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0 // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0  // Z offset: -below +above  [the nozzle]
 #else
-  #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above  [the nozzle]
+  #define Z_PROBE_OFFSET_FROM_EXTRUDER   0    // Z offset: -below +above  [the nozzle]
 #endif
 
 // Certain types of probes need to stay away from edges
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index bddd9e849d..a89f48324b 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 1d20e272e1..b450e26744 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 1d20e272e1..b450e26744 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index ca64018f42..96c6059752 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index ca64018f42..96c6059752 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index ca64018f42..96c6059752 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 0a2411c019..8bd41a9c8f 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1622,7 +1622,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 79028c592c..322062cc87 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index fba5e6438d..eafec13353 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 742fbc9a27..506e52a90c 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1620,7 +1620,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index f76fc27a87..f568e77734 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1621,7 +1621,7 @@
 //#define G0_FEEDRATE         // Add a G0-specific sticky feedrate, applied to all subsequent G0 moves.
 #if ENABLED(G0_FEEDRATE)
   #define DEFAULT_G0_FEEDRATE 3000  // (mm/m)
-#endif 
+#endif
 
 /**
  * User-defined menu items that execute custom GCode
diff --git a/Marlin/src/gcode/motion/G0_G1.cpp b/Marlin/src/gcode/motion/G0_G1.cpp
index be2927b335..fa0904d1b0 100644
--- a/Marlin/src/gcode/motion/G0_G1.cpp
+++ b/Marlin/src/gcode/motion/G0_G1.cpp
@@ -58,9 +58,9 @@ void GcodeSuite::G0_G1(
   #if ENABLED(G0_FEEDRATE)
     float saved_g1_feedrate_mm_s;
   #endif
-  
+
   if (IsRunning() && G0_G1_CONDITION) {
-    
+
     #if ENABLED(G0_FEEDRATE)
       if (fast_move) {
         // Save standard feedrate before setting feedrate to fast/g0
@@ -95,13 +95,13 @@ void GcodeSuite::G0_G1(
     #endif
 
     #if ENABLED(G0_FEEDRATE)
-      // save G0 feedrate, and restore standard feedrate as soon as possible 
+      // save G0 feedrate, and restore standard feedrate as soon as possible
       if (fast_move) {
         saved_g0_feedrate_mm_s = feedrate_mm_s;
         feedrate_mm_s = saved_g1_feedrate_mm_s;
       }
     #endif
-    
+
     #if ENABLED(NANODLP_Z_SYNC)
       #if ENABLED(NANODLP_ALL_AXIS)
         #define _MOVE_SYNC parser.seenval('X') || parser.seenval('Y') || parser.seenval('Z')  // For any move wait and output sync message