HAL compatible pinsDebug & misc

Re-ARM has been tested.  AVR has not been tested.

1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h

2) added pinsDebug.h to the top level directory

3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU

4) Patched sanitycheck to stop throwing false errors.  A long term
solution will be done

5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error

======================================================================

split SanityCheck up, improve pinsDebug system

======================================================================

switch to latest pins_RAMPS_RE_ARM.h

Marlin/Marlin_main.cpp

@@ -6632,7 +6632,7 @@ inline void gcode_M42() {
 
 #if ENABLED(PINS_DEBUGGING)
 
-  #include "src/HAL/HAL_pinsDebug.h"
+  #include "pinsDebug.h"
 
   inline void toggle_pins() {
     const bool I_flag = parser.boolval('I');

Marlin/SanityCheck.h

@@ -1283,16 +1283,6 @@ static_assert(1 >= 0
   #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
 #endif
 
-/**
- * Digipot requirement
- */
-#if ENABLED(DIGIPOT_MCP4018)
-  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
-    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
-      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
-  #endif
-#endif
-
 /**
  * Require 4 or more elements in per-axis initializers
  */
@@ -1306,63 +1296,5 @@ static_assert(COUNT(sanity_arr_1) <= XYZE_N, "DEFAULT_AXIS_STEPS_PER_UNIT has to
 static_assert(COUNT(sanity_arr_2) <= XYZE_N, "DEFAULT_MAX_FEEDRATE has too many elements.");
 static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too many elements.");
 
-/**
+
- * Sanity checks for Spindle / Laser
+#include "src/HAL/HAL_SanityCheck.h"  // get CPU specific checks
- */
-#if ENABLED(SPINDLE_LASER_ENABLE)
-  #if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
-    #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
-  #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
-    #error "SPINDLE_DIR_PIN not defined."
-  #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
-    #if !(WITHIN(SPINDLE_LASER_PWM_PIN, 2, 13) || WITHIN(SPINDLE_LASER_PWM_PIN, 44, 46))
-      #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
-    #elif SPINDLE_LASER_POWERUP_DELAY < 1
-      #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
-    #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
-      #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
-    #elif !defined(SPINDLE_LASER_PWM_INVERT)
-      #error "SPINDLE_LASER_PWM_INVERT missing."
-    #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
-      #error "SPINDLE_LASER_PWM equation constant(s) missing."
-    #elif SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
-      #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
-    #elif PIN_EXISTS(X_MAX) && X_MAX_PIN == SPINDLE_LASER_PWM_PIN
-      #error "SPINDLE_LASER_PWM pin is in use by X_MAX endstop."
-    #elif PIN_EXISTS(X_MIN) && X_MIN_PIN == SPINDLE_LASER_PWM_PIN
-      #error "SPINDLE_LASER_PWM pin is in use by X_MIN endstop."
-    #elif PIN_EXISTS(Z_STEP) && Z_STEP_PIN == SPINDLE_LASER_PWM_PIN
-      #error "SPINDLE_LASER_PWM pin in use by Z_STEP."
-    #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
-      #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
-    #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
-    #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
-    #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
-    #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
-    #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
-    #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
-    #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
-    #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
-    #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
-    #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
-    #elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_XY."
-    #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_Z_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_Z."
-    #elif PIN_EXISTS(MOTOR_CURRENT_PWM_E) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_E_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_E."
-    #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
-      #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT."
-    #endif
-  #endif
-#endif // SPINDLE_LASER_ENABLE

Marlin/src/HAL/HAL_LPC1768/HAL_pinsDebug.h → Marlin/pinsDebug.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
@@ -44,8 +44,14 @@ bool endstop_monitor_flag = false;
 #define REPORT_NAME_DIGITAL(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER)
 #define REPORT_NAME_ANALOG(NAME, COUNTER) _ADD_PIN(#NAME, COUNTER)
 
-#include "../../../pinsDebug_list.h"
+#include "pinsDebug_list.h"
-#line 51
+#line 49
+
+// manually add pins that have names that are macros which don't play well with these macros
+#if SERIAL_PORT == 0 && (AVR_ATmega2560_FAMILY || AVR_ATmega1284_FAMILY)
+  static const char RXD_NAME[] PROGMEM = { "RXD" };
+  static const char TXD_NAME[] PROGMEM = { "TXD" };
+#endif
 
 /////////////////////////////////////////////////////////////////////////////
 
@@ -81,41 +87,34 @@ const PinInfo pin_array[] PROGMEM = {
 
   // manually add pins ...
   #if SERIAL_PORT == 0
-
+    #if AVR_ATmega2560_FAMILY
+      { RXD_NAME, 0, true },
+      { TXD_NAME, 1, true },
+    #elif AVR_ATmega1284_FAMILY
+      { RXD_NAME, 8, true },
+      { TXD_NAME, 9, true },
+    #endif
   #endif
 
-  #include "../../../pinsDebug_list.h"
+  #include "pinsDebug_list.h"
-  #line 102
+  #line 101
 
 };
 
-#define AVR_ATmega2560_FAMILY_PLUS_70 (MOTHERBOARD == BOARD_BQ_ZUM_MEGA_3D \
-|| MOTHERBOARD == BOARD_MIGHTYBOARD_REVE \
-|| MOTHERBOARD == BOARD_MINIRAMBO \
-|| MOTHERBOARD == BOARD_SCOOVO_X9H)
-
 
-#include "pinsDebug_Re_ARM.h"
+#include "src/HAL/HAL_pinsDebug.h"  // get the correct support file for this CPU
 
-#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM:  %4d"), V); SERIAL_ECHO(buffer); }while(0)
-#define PWM_CASE(N,Z)                                           \
-  case TIMER##N##Z:                                             \
-    if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \
-      PWM_PRINT(OCR##N##Z);                                     \
-      return true;                                              \
-    } else return false
-
-bool PWM_ok = true;
 
 static void print_input_or_output(const bool isout) {
   serialprintPGM(isout ? PSTR("Output = ") : PSTR("Input  = "));
 }
 
+
 // pretty report with PWM info
 inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = false, const char *start_string = "") {
-  uint8_t temp_char;
+  char buffer[30];   // for the sprintf statements
-  char *name_mem_pointer, buffer[30];   // for the sprintf statements
   bool found = false, multi_name_pin = false;
+
   for (uint8_t x = 0; x < COUNT(pin_array); x++)  {    // scan entire array and report all instances of this pin
     if (GET_ARRAY_PIN(x) == pin) {
       GET_PIN_INFO(pin);
@@ -140,35 +139,42 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f
         if (pin_is_protected(pin) && !ignore)
           SERIAL_ECHOPGM("protected ");
         else {
-//SERIAL_PROTOCOLPAIR(" GET_ARRAY_IS_DIGITAL(x) 0 = analog : ", GET_ARRAY_IS_DIGITAL(x));           
+          #if AVR_AT90USB1286_FAMILY //Teensy IDEs don't know about these pins so must use FASTIO
-
+            if (pin == 46 || pin == 47) {
-          if (!GET_ARRAY_IS_DIGITAL(x)) {
+              if (pin == 46) {
-            sprintf_P(buffer, PSTR("Analog in = %5d"), analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)));
+                print_input_or_output(GET_OUTPUT(46));
-            SERIAL_ECHO(buffer);
+                SERIAL_PROTOCOL(READ(46));
-          }
+              }
-          else {
+              else if (pin == 47) {
-
+                print_input_or_output(GET_OUTPUT(47));
-//MYSERIAL.printf("  GET_PINMODE(pin) 1 = output : %d   ", GET_PINMODE(pin));           
+                SERIAL_PROTOCOL(READ(47));
-            if (!GET_PINMODE(pin)) {
+              }
-              //pinMode(pin, INPUT_PULLUP);  // make sure input isn't floating - stopped doing this
+            }
-                                             // because this could interfere with inductive/capacitive
+            else
-                                             // sensors (high impedance voltage divider) and with PT100 amplifier
+          #endif
-              print_input_or_output(false);
+          {
-              SERIAL_PROTOCOL(digitalRead_mod(pin));
+            if (!GET_ARRAY_IS_DIGITAL(x)) {
+              sprintf_P(buffer, PSTR("Analog in = %5d"), analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)));
+              SERIAL_ECHO(buffer);
             }
-            #if PWM_ok
+            else {
+              if (!GET_PINMODE(pin)) {
+                //pinMode(pin, INPUT_PULLUP);  // make sure input isn't floating - stopped doing this
+                                               // because this could interfere with inductive/capacitive
+                                               // sensors (high impedance voltage divider) and with PT100 amplifier
+                print_input_or_output(false);
+                SERIAL_PROTOCOL(digitalRead_mod(pin));
+              }
               else if (pwm_status(pin)) {
                 // do nothing
               }
-              #endif
+              else {
-            else {
+                print_input_or_output(true);
-              print_input_or_output(true);
+                SERIAL_PROTOCOL(digitalRead_mod(pin));
-              SERIAL_PROTOCOL(digitalRead_mod(pin));
+              }
             }
-          }
-          #if PWM_ok
             if (!multi_name_pin && extended) pwm_details(pin);  // report PWM capabilities only on the first pass & only if doing an extended report
-          #endif
+          }
         }
       }
       SERIAL_EOL();
@@ -176,7 +182,6 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f
   } // end of for loop
 
   if (!found) {
-    GET_PIN_INFO(pin);
     sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin);
     SERIAL_ECHO(buffer);
     PRINT_PORT(pin);
@@ -188,27 +193,41 @@ inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = f
       SERIAL_ECHO_SP(8);   // add padding if not an analog pin
     SERIAL_ECHOPGM("<unused/unknown>");
     if (extended) {
-      if (GET_PINMODE(pin)) {
+      #if AVR_AT90USB1286_FAMILY  //Teensy IDEs don't know about these pins so must use FASTIO
-        SERIAL_PROTOCOL_SP(MAX_NAME_LENGTH - 16);
+        if (pin == 46 || pin == 47) {
-        print_input_or_output(true);
+          SERIAL_PROTOCOL_SP(12);
-        SERIAL_PROTOCOL(digitalRead_mod(pin));
+          if (pin == 46) {
-      }
+            print_input_or_output(GET_OUTPUT(46));
-      else {
+            SERIAL_PROTOCOL(READ(46));
-        if (IS_ANALOG(pin)) {
+          }
-          sprintf_P(buffer, PSTR("   Analog in = %5d"), analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)));
+          else {
-          SERIAL_ECHO(buffer);
+            print_input_or_output(GET_OUTPUT(47));
-          SERIAL_ECHOPGM("   ");
+            SERIAL_PROTOCOL(READ(47));
+          }
         }
         else
-        SERIAL_ECHO_SP(MAX_NAME_LENGTH - 16);   // add padding if not an analog pin
+      #endif
+      {
+        if (GET_PINMODE(pin)) {
+          SERIAL_PROTOCOL_SP(MAX_NAME_LENGTH - 16);
+          print_input_or_output(true);
+          SERIAL_PROTOCOL(digitalRead_mod(pin));
+        }
+        else {
+          if (IS_ANALOG(pin)) {
+            sprintf_P(buffer, PSTR("   Analog in = %5d"), analogRead(DIGITAL_PIN_TO_ANALOG_PIN(pin)));
+            SERIAL_ECHO(buffer);
+            SERIAL_ECHOPGM("   ");
+          }
+          else
+          SERIAL_ECHO_SP(MAX_NAME_LENGTH - 16);   // add padding if not an analog pin
 
-        print_input_or_output(false);
+          print_input_or_output(false);
-        SERIAL_PROTOCOL(digitalRead_mod(pin));
+          SERIAL_PROTOCOL(digitalRead_mod(pin));
-      }
+        }
-      //if (!pwm_status(pin)) SERIAL_CHAR(' ');    // add padding if it's not a PWM pin
+        //if (!pwm_status(pin)) SERIAL_CHAR(' ');    // add padding if it's not a PWM pin
-      #if PWM_ok
         if (extended) pwm_details(pin);  // report PWM capabilities only if doing an extended report
-      #endif
+      }
     }
     SERIAL_EOL();
   }

Marlin/pinsDebug_list.h

@@ -11,7 +11,7 @@
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * but WITHOUT ANY WARRANTY without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
@@ -25,77 +25,119 @@
 // Following this pattern is a must.
 // If the new pin name is over 28 characters long then pinsDebug.h will need to be modified.
 
-// Pin list updated from 18 FEB 2017 RCBugfix branch   - max length of pin name is 24
+// Pin list updated from 25 JUL 2017 Re-ARM branch   - max length of pin name is 24
 
 #line 0 // set __LINE__ to a known value for both passes
 
-#if PIN_EXISTS(ADC_KEYPAD) && ADC_KEYPAD_PIN < NUM_ANALOG_INPUTS
+#if defined(EXT_AUX_A0) &&  EXT_AUX_A0 >= 0 &&  EXT_AUX_A0 < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(ADC_KEYPAD_PIN, __LINE__ )
+  REPORT_NAME_ANALOG(EXT_AUX_A0, __LINE__ )
+#endif
+#if defined(EXT_AUX_A1) &&  EXT_AUX_A1 >= 0 &&  EXT_AUX_A1 < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(EXT_AUX_A1, __LINE__ )
+#endif
+#if defined(EXT_AUX_A2) &&  EXT_AUX_A2 >= 0 &&  EXT_AUX_A2 < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(EXT_AUX_A2, __LINE__ )
+#endif
+#if defined(EXT_AUX_A3) &&  EXT_AUX_A3 >= 0 &&  EXT_AUX_A3 < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(EXT_AUX_A3, __LINE__ )
+#endif
+#if defined(EXT_AUX_A4) &&  EXT_AUX_A4 >= 0 &&  EXT_AUX_A4 < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(EXT_AUX_A4, __LINE__ )
+#endif
+#if PIN_EXISTS(FILWIDTH) &&  FILWIDTH_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) &&  MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(MAIN_VOLTAGE_MEASURE_PIN, __LINE__ )
+#endif
+#if defined(TC1) &&  TC1 >= 0 &&  TC1 < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TC1, __LINE__ )
+#endif
+#if defined(TC2) &&  TC2 >= 0 &&  TC2 < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TC2, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_0) &&  TEMP_0_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ )
 #endif
-#if defined(__FD) && __FD >= 0
+#if PIN_EXISTS(TEMP_1) &&  TEMP_1_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_1_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_2) &&  TEMP_2_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_2_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_3) &&  TEMP_3_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_3_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_4) &&  TEMP_4_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_BED) &&  TEMP_BED_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_CHAMBER) &&  TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_CHAMBER_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(TEMP_X) &&  TEMP_X_PIN < NUM_ANALOG_INPUTS
+  REPORT_NAME_ANALOG(TEMP_X_PIN, __LINE__ )
+#endif
+#if defined(__FD) &&  __FD >= 0
   REPORT_NAME_DIGITAL(__FD, __LINE__ )
 #endif
-#if defined(__FS) && __FS >= 0
+#if defined(__FS) &&  __FS >= 0
   REPORT_NAME_DIGITAL(__FS, __LINE__ )
 #endif
-#if defined(__GD) && __GD >= 0
+#if defined(__GD) &&  __GD >= 0
   REPORT_NAME_DIGITAL(__GD, __LINE__ )
 #endif
-#if defined(__GS) && __GS >= 0
+#if defined(__GS) &&  __GS >= 0
   REPORT_NAME_DIGITAL(__GS, __LINE__ )
 #endif
 #if PIN_EXISTS(ADC_KEYPAD)
-  REPORT_NAME_ANALOG(ADC_KEYPAD_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(ADC_KEYPAD_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(AVR_MISO)
+#if PIN_EXISTS(ALARM)
-  REPORT_NAME_DIGITAL(AVR_MISO_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(ALARM_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(AVR_MOSI)
-  REPORT_NAME_DIGITAL(AVR_MOSI_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(AVR_SCK)
-  REPORT_NAME_DIGITAL(AVR_SCK_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(AVR_SS)
-  REPORT_NAME_DIGITAL(AVR_SS_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(BEEPER)
   REPORT_NAME_DIGITAL(BEEPER_PIN, __LINE__ )
 #endif
-#if defined(BTN_CENTER) && BTN_CENTER >= 0
+#if defined(BTN_BACK) &&  BTN_BACK >= 0
+  REPORT_NAME_DIGITAL(BTN_BACK, __LINE__ )
+#endif
+#if defined(BTN_CENTER) &&  BTN_CENTER >= 0
   REPORT_NAME_DIGITAL(BTN_CENTER, __LINE__ )
 #endif
-#if defined(BTN_DOWN) && BTN_DOWN >= 0
+#if defined(BTN_DOWN) &&  BTN_DOWN >= 0
   REPORT_NAME_DIGITAL(BTN_DOWN, __LINE__ )
 #endif
-#if defined(BTN_DWN) && BTN_DWN >= 0
+#if defined(BTN_DWN) &&  BTN_DWN >= 0
   REPORT_NAME_DIGITAL(BTN_DWN, __LINE__ )
 #endif
-#if defined(BTN_EN1) && BTN_EN1 >= 0
+#if defined(BTN_EN1) &&  BTN_EN1 >= 0
   REPORT_NAME_DIGITAL(BTN_EN1, __LINE__ )
 #endif
-#if defined(BTN_EN2) && BTN_EN2 >= 0
+#if defined(BTN_EN2) &&  BTN_EN2 >= 0
   REPORT_NAME_DIGITAL(BTN_EN2, __LINE__ )
 #endif
-#if defined(BTN_ENC) && BTN_ENC >= 0
+#if defined(BTN_ENC) &&  BTN_ENC >= 0
   REPORT_NAME_DIGITAL(BTN_ENC, __LINE__ )
 #endif
-#if defined(BTN_HOME) && BTN_HOME >= 0
+#if defined(BTN_HOME) &&  BTN_HOME >= 0
   REPORT_NAME_DIGITAL(BTN_HOME, __LINE__ )
 #endif
-#if defined(BTN_LEFT) && BTN_LEFT >= 0
+#if defined(BTN_LEFT) &&  BTN_LEFT >= 0
   REPORT_NAME_DIGITAL(BTN_LEFT, __LINE__ )
 #endif
-#if defined(BTN_LFT) && BTN_LFT >= 0
+#if defined(BTN_LFT) &&  BTN_LFT >= 0
   REPORT_NAME_DIGITAL(BTN_LFT, __LINE__ )
 #endif
-#if defined(BTN_RIGHT) && BTN_RIGHT >= 0
+#if defined(BTN_RIGHT) &&  BTN_RIGHT >= 0
   REPORT_NAME_DIGITAL(BTN_RIGHT, __LINE__ )
 #endif
-#if defined(BTN_RT) && BTN_RT >= 0
+#if defined(BTN_RT) &&  BTN_RT >= 0
   REPORT_NAME_DIGITAL(BTN_RT, __LINE__ )
 #endif
-#if defined(BTN_UP) && BTN_UP >= 0
+#if defined(BTN_UP) &&  BTN_UP >= 0
   REPORT_NAME_DIGITAL(BTN_UP, __LINE__ )
 #endif
 #if PIN_EXISTS(CASE_LIGHT)
@@ -110,54 +152,72 @@
 #if PIN_EXISTS(CUTOFF_TEST)
   REPORT_NAME_DIGITAL(CUTOFF_TEST_PIN, __LINE__ )
 #endif
+#if defined(D57) &&  D57 >= 0
+  REPORT_NAME_DIGITAL(D57, __LINE__ )
+#endif
+#if defined(D58) &&  D58 >= 0
+  REPORT_NAME_DIGITAL(D58, __LINE__ )
+#endif
 #if PIN_EXISTS(DAC_DISABLE)
   REPORT_NAME_DIGITAL(DAC_DISABLE_PIN, __LINE__ )
 #endif
-#if defined(DAC_STEPPER_VREF) && DAC_STEPPER_VREF >= 0
+#if defined(DAC0_SYNC) &&  DAC0_SYNC >= 0
-  REPORT_NAME_DIGITAL(DAC_STEPPER_VREF, __LINE__ )
+  REPORT_NAME_DIGITAL(DAC0_SYNC, __LINE__ )
+#endif
+#if defined(DAC1_SYNC) &&  DAC1_SYNC >= 0
+  REPORT_NAME_DIGITAL(DAC1_SYNC, __LINE__ )
 #endif
 #if PIN_EXISTS(DEBUG)
   REPORT_NAME_DIGITAL(DEBUG_PIN, __LINE__ )
 #endif
-#if defined(DIGIPOTS_I2C_SCL) && DIGIPOTS_I2C_SCL >= 0
+#if defined(DIGIPOTS_I2C_SCL) &&  DIGIPOTS_I2C_SCL >= 0
   REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SCL, __LINE__ )
 #endif
-#if defined(DIGIPOTS_I2C_SDA_E0) && DIGIPOTS_I2C_SDA_E0 >= 0
+#if defined(DIGIPOTS_I2C_SDA_E0) &&  DIGIPOTS_I2C_SDA_E0 >= 0
   REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E0, __LINE__ )
 #endif
-#if defined(DIGIPOTS_I2C_SDA_E1) && DIGIPOTS_I2C_SDA_E1 >= 0
+#if defined(DIGIPOTS_I2C_SDA_E1) &&  DIGIPOTS_I2C_SDA_E1 >= 0
   REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_E1, __LINE__ )
 #endif
-#if defined(DIGIPOTS_I2C_SDA_X) && DIGIPOTS_I2C_SDA_X >= 0
+#if defined(DIGIPOTS_I2C_SDA_X) &&  DIGIPOTS_I2C_SDA_X >= 0
   REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_X, __LINE__ )
 #endif
-#if defined(DIGIPOTS_I2C_SDA_Y) && DIGIPOTS_I2C_SDA_Y >= 0
+#if defined(DIGIPOTS_I2C_SDA_Y) &&  DIGIPOTS_I2C_SDA_Y >= 0
   REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Y, __LINE__ )
 #endif
-#if defined(DIGIPOTS_I2C_SDA_Z) && DIGIPOTS_I2C_SDA_Z >= 0
+#if defined(DIGIPOTS_I2C_SDA_Z) &&  DIGIPOTS_I2C_SDA_Z >= 0
   REPORT_NAME_DIGITAL(DIGIPOTS_I2C_SDA_Z, __LINE__ )
 #endif
 #if PIN_EXISTS(DIGIPOTSS)
   REPORT_NAME_DIGITAL(DIGIPOTSS_PIN, __LINE__ )
 #endif
-#if defined(DOGLCD_A0) && DOGLCD_A0 >= 0
+#if defined(DOGLCD_A0) &&  DOGLCD_A0 >= 0
   REPORT_NAME_DIGITAL(DOGLCD_A0, __LINE__ )
 #endif
-#if defined(DOGLCD_CS) && DOGLCD_CS >= 0
+#if defined(DOGLCD_CS) &&  DOGLCD_CS >= 0
   REPORT_NAME_DIGITAL(DOGLCD_CS, __LINE__ )
 #endif
-#if defined(DOGLCD_MOSI) && DOGLCD_MOSI >= 0
+#if defined(DOGLCD_MOSI) &&  DOGLCD_MOSI >= 0
   REPORT_NAME_DIGITAL(DOGLCD_MOSI, __LINE__ )
 #endif
-#if defined(DOGLCD_SCK) && DOGLCD_SCK >= 0
+#if defined(DOGLCD_SCK) &&  DOGLCD_SCK >= 0
   REPORT_NAME_DIGITAL(DOGLCD_SCK, __LINE__ )
 #endif
+#if PIN_EXISTS(E_MUX0)
+  REPORT_NAME_DIGITAL(E_MUX0_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(E_MUX1)
+  REPORT_NAME_DIGITAL(E_MUX1_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(E_MUX2)
+  REPORT_NAME_DIGITAL(E_MUX2_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(E_STOP)
+  REPORT_NAME_DIGITAL(E_STOP_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(E0_ATT)
   REPORT_NAME_DIGITAL(E0_ATT_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(E0_AUTO_FAN)
-  REPORT_NAME_DIGITAL(E0_AUTO_FAN_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(E0_CS)
   REPORT_NAME_DIGITAL(E0_CS_PIN, __LINE__ )
 #endif
@@ -176,9 +236,6 @@
 #if PIN_EXISTS(E0_STEP)
   REPORT_NAME_DIGITAL(E0_STEP_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(E1_AUTO_FAN)
-  REPORT_NAME_DIGITAL(E1_AUTO_FAN_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(E1_CS)
   REPORT_NAME_DIGITAL(E1_CS_PIN, __LINE__ )
 #endif
@@ -197,8 +254,8 @@
 #if PIN_EXISTS(E1_STEP)
   REPORT_NAME_DIGITAL(E1_STEP_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(E2_AUTO_FAN)
+#if PIN_EXISTS(E2_CS)
-  REPORT_NAME_DIGITAL(E2_AUTO_FAN_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(E2_CS_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(E2_DIR)
   REPORT_NAME_DIGITAL(E2_DIR_PIN, __LINE__ )
@@ -209,8 +266,8 @@
 #if PIN_EXISTS(E2_STEP)
   REPORT_NAME_DIGITAL(E2_STEP_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(E3_AUTO_FAN)
+#if PIN_EXISTS(E3_CS)
-  REPORT_NAME_DIGITAL(E3_AUTO_FAN_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(E3_CS_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(E3_DIR)
   REPORT_NAME_DIGITAL(E3_DIR_PIN, __LINE__ )
@@ -218,12 +275,18 @@
 #if PIN_EXISTS(E3_ENABLE)
   REPORT_NAME_DIGITAL(E3_ENABLE_PIN, __LINE__ )
 #endif
+#if PIN_EXISTS(E3_MS1)
+  REPORT_NAME_DIGITAL(E3_MS1_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(E3_MS2)
+  REPORT_NAME_DIGITAL(E3_MS2_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(E3_MS3)
+  REPORT_NAME_DIGITAL(E3_MS3_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(E3_STEP)
   REPORT_NAME_DIGITAL(E3_STEP_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(E4_AUTO_FAN)
-  REPORT_NAME_DIGITAL(E4_AUTO_FAN_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(E4_DIR)
   REPORT_NAME_DIGITAL(E4_DIR_PIN, __LINE__ )
 #endif
@@ -233,86 +296,83 @@
 #if PIN_EXISTS(E4_STEP)
   REPORT_NAME_DIGITAL(E4_STEP_PIN, __LINE__ )
 #endif
-#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS
+#if defined(ENET_CRS) &&  ENET_CRS >= 0
-  REPORT_NAME_ANALOG(EXT_AUX_A0, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_CRS, __LINE__ )
 #endif
-#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 >= NUM_ANALOG_INPUTS
+#if defined(ENET_MDIO) &&  ENET_MDIO >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A0, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_MDIO, __LINE__ )
 #endif
-#if defined(EXT_AUX_A0_IO) && EXT_AUX_A0_IO >= 0
+#if defined(ENET_MOC) &&  ENET_MOC >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A0_IO, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_MOC, __LINE__ )
 #endif
-#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS
+#if defined(ENET_RX_ER) &&  ENET_RX_ER >= 0
-  REPORT_NAME_ANALOG(EXT_AUX_A1, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_RX_ER, __LINE__ )
 #endif
-#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 >= NUM_ANALOG_INPUTS
+#if defined(ENET_RXD0) &&  ENET_RXD0 >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A1, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_RXD0, __LINE__ )
 #endif
-#if defined(EXT_AUX_A1_IO) && EXT_AUX_A1_IO >= 0
+#if defined(ENET_RXD1) &&  ENET_RXD1 >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A1_IO, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_RXD1, __LINE__ )
 #endif
-#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS
+#if defined(ENET_TX_EN) &&  ENET_TX_EN >= 0
-  REPORT_NAME_ANALOG(EXT_AUX_A2, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_TX_EN, __LINE__ )
 #endif
-#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 >= NUM_ANALOG_INPUTS
+#if defined(ENET_TXD0) &&  ENET_TXD0 >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A2, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_TXD0, __LINE__ )
 #endif
-#if defined(EXT_AUX_A2_IO) && EXT_AUX_A2_IO >= 0
+#if defined(ENET_TXD1) &&  ENET_TXD1 >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A2_IO, __LINE__ )
+  REPORT_NAME_DIGITAL(ENET_TXD1, __LINE__ )
 #endif
-#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS
+#if PIN_EXISTS(EXP_VOLTAGE_LEVEL)
-  REPORT_NAME_ANALOG(EXT_AUX_A3, __LINE__ )
+  REPORT_NAME_DIGITAL(EXP_VOLTAGE_LEVEL_PIN, __LINE__ )
 #endif
-#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 >= NUM_ANALOG_INPUTS
+#if defined(EXT_AUX_A0_IO) &&  EXT_AUX_A0_IO >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A3, __LINE__ )
+  REPORT_NAME_DIGITAL(EXT_AUX_A0_IO, __LINE__ )
 #endif
-#if defined(EXT_AUX_A3_IO) && EXT_AUX_A3_IO >= 0
+#if defined(EXT_AUX_A1_IO) &&  EXT_AUX_A1_IO >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A3_IO, __LINE__ )
+  REPORT_NAME_DIGITAL(EXT_AUX_A1_IO, __LINE__ )
 #endif
-#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS
+#if defined(EXT_AUX_A2_IO) &&  EXT_AUX_A2_IO >= 0
-  REPORT_NAME_ANALOG(EXT_AUX_A4, __LINE__ )
+  REPORT_NAME_DIGITAL(EXT_AUX_A2_IO, __LINE__ )
 #endif
-#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 >= NUM_ANALOG_INPUTS
+#if defined(EXT_AUX_A3_IO) &&  EXT_AUX_A3_IO >= 0
-  REPORT_NAME_DIGITAL(EXT_AUX_A4, __LINE__ )
+  REPORT_NAME_DIGITAL(EXT_AUX_A3_IO, __LINE__ )
 #endif
-#if defined(EXT_AUX_A4_IO) && EXT_AUX_A4_IO >= 0
+#if defined(EXT_AUX_A4_IO) &&  EXT_AUX_A4_IO >= 0
   REPORT_NAME_DIGITAL(EXT_AUX_A4_IO, __LINE__ )
 #endif
-#if defined(EXT_AUX_PWM_D24) && EXT_AUX_PWM_D24 >= 0
+#if defined(EXT_AUX_PWM_D24) &&  EXT_AUX_PWM_D24 >= 0
   REPORT_NAME_DIGITAL(EXT_AUX_PWM_D24, __LINE__ )
 #endif
-#if defined(EXT_AUX_RX1_D2) && EXT_AUX_RX1_D2 >= 0
+#if defined(EXT_AUX_RX1_D2) &&  EXT_AUX_RX1_D2 >= 0
   REPORT_NAME_DIGITAL(EXT_AUX_RX1_D2, __LINE__ )
 #endif
-#if defined(EXT_AUX_SCL_D0) && EXT_AUX_SCL_D0 >= 0
+#if defined(EXT_AUX_SCL_D0) &&  EXT_AUX_SCL_D0 >= 0
   REPORT_NAME_DIGITAL(EXT_AUX_SCL_D0, __LINE__ )
 #endif
-#if defined(EXT_AUX_SDA_D1) && EXT_AUX_SDA_D1 >= 0
+#if defined(EXT_AUX_SDA_D1) &&  EXT_AUX_SDA_D1 >= 0
   REPORT_NAME_DIGITAL(EXT_AUX_SDA_D1, __LINE__ )
 #endif
-#if defined(EXT_AUX_TX1_D3) && EXT_AUX_TX1_D3 >= 0
+#if defined(EXT_AUX_TX1_D3) &&  EXT_AUX_TX1_D3 >= 0
   REPORT_NAME_DIGITAL(EXT_AUX_TX1_D3, __LINE__ )
 #endif
-#if defined(EXTRUDER_0_AUTO_FAN) && EXTRUDER_0_AUTO_FAN >= 0
-  REPORT_NAME_DIGITAL(EXTRUDER_0_AUTO_FAN, __LINE__ )
-#endif
-#if defined(EXTRUDER_1_AUTO_FAN) && EXTRUDER_1_AUTO_FAN >= 0
-  REPORT_NAME_DIGITAL(EXTRUDER_1_AUTO_FAN, __LINE__ )
-#endif
 #if PIN_EXISTS(FAN)
   REPORT_NAME_DIGITAL(FAN_PIN, __LINE__ )
-#endif
+#endif 
 #if PIN_EXISTS(FAN1)
   REPORT_NAME_DIGITAL(FAN1_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(FAN2)
   REPORT_NAME_DIGITAL(FAN2_PIN, __LINE__ )
 #endif
+#if PIN_EXISTS(FAN3)
+  REPORT_NAME_DIGITAL(FAN3_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(FIL_RUNOUT)
   REPORT_NAME_DIGITAL(FIL_RUNOUT_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
+#if defined(GEN7_VERSION) &&  GEN7_VERSION >= 0
-  REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(GEN7_VERSION, __LINE__ )
 #endif
 #if PIN_EXISTS(HEATER_0)
   REPORT_NAME_DIGITAL(HEATER_0_PIN, __LINE__ )
@@ -344,6 +404,9 @@
 #if PIN_EXISTS(HOME)
   REPORT_NAME_DIGITAL(HOME_PIN, __LINE__ )
 #endif
+#if defined(I2C_EEPROM) &&  I2C_EEPROM >= 0
+  REPORT_NAME_DIGITAL(I2C_EEPROM, __LINE__ )
+#endif
 #if PIN_EXISTS(I2C_SCL)
   REPORT_NAME_DIGITAL(I2C_SCL_PIN, __LINE__ )
 #endif
@@ -356,53 +419,56 @@
 #if PIN_EXISTS(LCD_BACKLIGHT)
   REPORT_NAME_DIGITAL(LCD_BACKLIGHT_PIN, __LINE__ )
 #endif
-#if defined(LCD_CONTRAST) && LCD_CONTRAST >= 0
+#if PIN_EXISTS(LCD)
-  REPORT_NAME_DIGITAL(LCD_CONTRAST, __LINE__ )
-#endif
-#if defined(LCD_PINS_D4) && LCD_PINS_D4 >= 0
   REPORT_NAME_DIGITAL(LCD_PINS_D4, __LINE__ )
 #endif
-#if defined(LCD_PINS_D5) && LCD_PINS_D5 >= 0
+#if PIN_EXISTS(LCD)
   REPORT_NAME_DIGITAL(LCD_PINS_D5, __LINE__ )
 #endif
-#if defined(LCD_PINS_D6) && LCD_PINS_D6 >= 0
+#if PIN_EXISTS(LCD)
   REPORT_NAME_DIGITAL(LCD_PINS_D6, __LINE__ )
 #endif
-#if defined(LCD_PINS_D7) && LCD_PINS_D7 >= 0
+#if PIN_EXISTS(LCD)
   REPORT_NAME_DIGITAL(LCD_PINS_D7, __LINE__ )
 #endif
-#if defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE >= 0
+#if PIN_EXISTS(LCD)
   REPORT_NAME_DIGITAL(LCD_PINS_ENABLE, __LINE__ )
 #endif
-#if defined(LCD_PINS_RS) && LCD_PINS_RS >= 0
+#if PIN_EXISTS(LCD)
   REPORT_NAME_DIGITAL(LCD_PINS_RS, __LINE__ )
 #endif
-#if defined(LCD_SDSS) && LCD_SDSS >= 0
+#if defined(LCD_SDSS) &&  LCD_SDSS >= 0
   REPORT_NAME_DIGITAL(LCD_SDSS, __LINE__ )
 #endif
+#if PIN_EXISTS(LED_GREEN)
+  REPORT_NAME_DIGITAL(LED_GREEN_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(LED)
   REPORT_NAME_DIGITAL(LED_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
+#if PIN_EXISTS(LED_RED)
-  REPORT_NAME_ANALOG(MAIN_VOLTAGE_MEASURE_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(LED_RED_PIN, __LINE__ )
 #endif
-#if defined(MAX6675_SS) && MAX6675_SS >= 0
+#if PIN_EXISTS(MAX)
-  REPORT_NAME_DIGITAL(MAX6675_SS, __LINE__ )
+  REPORT_NAME_DIGITAL(MAX_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(MISO)
+#if PIN_EXISTS(MAX6675_DO)
-  REPORT_NAME_DIGITAL(MISO_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(MAX6675_DO_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(MAX6675_SCK)
+  REPORT_NAME_DIGITAL(MAX6675_SCK_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(MOSFET_A)
+#if defined(MAX6675_SS) &&  MAX6675_SS >= 0
-  REPORT_NAME_DIGITAL(MOSFET_A_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(MAX6675_SS, __LINE__ )
 #endif
-#if PIN_EXISTS(MOSFET_B)
+#if defined(MISO) &&  MISO >= 0
-  REPORT_NAME_DIGITAL(MOSFET_B_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(MISO, __LINE__ )
 #endif
-#if PIN_EXISTS(MOSFET_C)
+#if PIN_EXISTS(MISO)
-  REPORT_NAME_DIGITAL(MOSFET_C_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(MISO_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(MOSFET_D)
+#if defined(MOSI) &&  MOSI >= 0
-  REPORT_NAME_DIGITAL(MOSFET_D_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(MOSI, __LINE__ )
 #endif
 #if PIN_EXISTS(MOSI)
   REPORT_NAME_DIGITAL(MOSI_PIN, __LINE__ )
@@ -416,6 +482,12 @@
 #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
   REPORT_NAME_DIGITAL(MOTOR_CURRENT_PWM_Z_PIN, __LINE__ )
 #endif
+#if PIN_EXISTS(MOTOR_FAULT)
+  REPORT_NAME_DIGITAL(MOTOR_FAULT_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(NUM_DIGITAL)
+  REPORT_NAME_DIGITAL(NUM_DIGITAL_PINS, __LINE__ )
+#endif
 #if PIN_EXISTS(ORIG_E0_AUTO_FAN)
   REPORT_NAME_DIGITAL(ORIG_E0_AUTO_FAN_PIN, __LINE__ )
 #endif
@@ -428,9 +500,6 @@
 #if PIN_EXISTS(ORIG_E3_AUTO_FAN)
   REPORT_NAME_DIGITAL(ORIG_E3_AUTO_FAN_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(ORIG_E4_AUTO_FAN)
-  REPORT_NAME_DIGITAL(ORIG_E4_AUTO_FAN_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(PHOTOGRAPH)
   REPORT_NAME_DIGITAL(PHOTOGRAPH_PIN, __LINE__ )
 #endif
@@ -443,26 +512,8 @@
 #if PIN_EXISTS(PWM_2)
   REPORT_NAME_DIGITAL(PWM_2_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(RAMPS_D10)
+#if defined(REF_CLK) &&  REF_CLK >= 0
-  REPORT_NAME_DIGITAL(RAMPS_D10_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(REF_CLK, __LINE__ )
-#endif
-#if PIN_EXISTS(RAMPS_D8)
-  REPORT_NAME_DIGITAL(RAMPS_D8_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(RAMPS_D9)
-  REPORT_NAME_DIGITAL(RAMPS_D9_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(RGB_LED_R)
-  REPORT_NAME_DIGITAL(RGB_LED_R_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(RGB_LED_G)
-  REPORT_NAME_DIGITAL(RGB_LED_G_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(RGB_LED_B)
-  REPORT_NAME_DIGITAL(RGB_LED_B_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(RGB_LED_W)
-  REPORT_NAME_DIGITAL(RGB_LED_W_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(RX_ENABLE)
   REPORT_NAME_DIGITAL(RX_ENABLE_PIN, __LINE__ )
@@ -470,24 +521,24 @@
 #if PIN_EXISTS(SAFETY_TRIGGERED)
   REPORT_NAME_DIGITAL(SAFETY_TRIGGERED_PIN, __LINE__ )
 #endif
+#if defined(SCK) &&  SCK >= 0
+  REPORT_NAME_DIGITAL(SCK, __LINE__ )
+#endif
 #if PIN_EXISTS(SCK)
   REPORT_NAME_DIGITAL(SCK_PIN, __LINE__ )
 #endif
-#if defined(SCL) && SCL >= 0
-  REPORT_NAME_DIGITAL(SCL, __LINE__ )
-#endif
 #if PIN_EXISTS(SD_DETECT)
   REPORT_NAME_DIGITAL(SD_DETECT_PIN, __LINE__ )
 #endif
-#if defined(SDA) && SDA >= 0
+#if defined(SDPOWER) &&  SDPOWER >= 0
-  REPORT_NAME_DIGITAL(SDA, __LINE__ )
-#endif
-#if defined(SDPOWER) && SDPOWER >= 0
   REPORT_NAME_DIGITAL(SDPOWER, __LINE__ )
 #endif
-#if defined(SDSS) && SDSS >= 0
+#if defined(SDSS) &&  SDSS >= 0
   REPORT_NAME_DIGITAL(SDSS, __LINE__ )
 #endif
+#if defined(SERVO0) &&  SERVO0 >= 0
+  REPORT_NAME_DIGITAL(SERVO0, __LINE__ )
+#endif
 #if PIN_EXISTS(SERVO0)
   REPORT_NAME_DIGITAL(SERVO0_PIN, __LINE__ )
 #endif
@@ -500,45 +551,54 @@
 #if PIN_EXISTS(SERVO3)
   REPORT_NAME_DIGITAL(SERVO3_PIN, __LINE__ )
 #endif
-#if defined(SHIFT_CLK) && SHIFT_CLK >= 0
+#if defined(SHIFT_CLK) &&  SHIFT_CLK >= 0
   REPORT_NAME_DIGITAL(SHIFT_CLK, __LINE__ )
 #endif
-#if defined(SHIFT_EN) && SHIFT_EN >= 0
+#if defined(SHIFT_EN) &&  SHIFT_EN >= 0
   REPORT_NAME_DIGITAL(SHIFT_EN, __LINE__ )
 #endif
-#if defined(SHIFT_LD) && SHIFT_LD >= 0
+#if defined(SHIFT_LD) &&  SHIFT_LD >= 0
   REPORT_NAME_DIGITAL(SHIFT_LD, __LINE__ )
 #endif
-#if defined(SHIFT_OUT) && SHIFT_OUT >= 0
+#if defined(SHIFT_OUT) &&  SHIFT_OUT >= 0
   REPORT_NAME_DIGITAL(SHIFT_OUT, __LINE__ )
 #endif
-#if PIN_EXISTS(SLED)
-  REPORT_NAME_DIGITAL(SLED_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(SLEEP_WAKE)
   REPORT_NAME_DIGITAL(SLEEP_WAKE_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(SOL0)
-  REPORT_NAME_DIGITAL(SOL0_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(SOL1)
   REPORT_NAME_DIGITAL(SOL1_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(SOL2)
   REPORT_NAME_DIGITAL(SOL2_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(SOL3)
+#if defined(SPARE_IO) &&  SPARE_IO >= 0
-  REPORT_NAME_DIGITAL(SOL3_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(SPARE_IO, __LINE__ )
 #endif
-#if PIN_EXISTS(SOL4)
+#if defined(SPI_CHAN_DAC) &&  SPI_CHAN_DAC >= 0
-  REPORT_NAME_DIGITAL(SOL4_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(SPI_CHAN_DAC, __LINE__ )
 #endif
-#if defined(SPARE_IO) && SPARE_IO >= 0
+#if defined(SPI_CHAN_EEPROM1) &&  SPI_CHAN_EEPROM1 >= 0
-  REPORT_NAME_DIGITAL(SPARE_IO, __LINE__ )
+  REPORT_NAME_DIGITAL(SPI_CHAN_EEPROM1, __LINE__ )
+#endif
+#if defined(SPI_EEPROM) &&  SPI_EEPROM >= 0
+  REPORT_NAME_DIGITAL(SPI_EEPROM, __LINE__ )
+#endif
+#if defined(SPI_EEPROM1_CS) &&  SPI_EEPROM1_CS >= 0
+  REPORT_NAME_DIGITAL(SPI_EEPROM1_CS, __LINE__ )
+#endif
+#if defined(SPI_EEPROM2_CS) &&  SPI_EEPROM2_CS >= 0
+  REPORT_NAME_DIGITAL(SPI_EEPROM2_CS, __LINE__ )
+#endif
+#if defined(SPI_FLASH_CS) &&  SPI_FLASH_CS >= 0
+  REPORT_NAME_DIGITAL(SPI_FLASH_CS, __LINE__ )
 #endif
 #if PIN_EXISTS(SPINDLE_DIR)
   REPORT_NAME_DIGITAL(SPINDLE_DIR_PIN, __LINE__ )
 #endif
+#if PIN_EXISTS(SPINDLE_ENABLE)
+  REPORT_NAME_DIGITAL(SPINDLE_ENABLE_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(SPINDLE_LASER_ENABLE)
   REPORT_NAME_DIGITAL(SPINDLE_LASER_ENABLE_PIN, __LINE__ )
 #endif
@@ -554,12 +614,12 @@
 #if PIN_EXISTS(SR_STROBE)
   REPORT_NAME_DIGITAL(SR_STROBE_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(SS)
-  REPORT_NAME_DIGITAL(SS_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(STAT_LED_BLUE)
   REPORT_NAME_DIGITAL(STAT_LED_BLUE_PIN, __LINE__ )
 #endif
+#if defined(STAT_LED_RED_LED) &&  STAT_LED_RED_LED >= 0
+  REPORT_NAME_DIGITAL(STAT_LED_RED_LED, __LINE__ )
+#endif
 #if PIN_EXISTS(STAT_LED_RED)
   REPORT_NAME_DIGITAL(STAT_LED_RED_PIN, __LINE__ )
 #endif
@@ -569,47 +629,11 @@
 #if PIN_EXISTS(SUICIDE)
   REPORT_NAME_DIGITAL(SUICIDE_PIN, __LINE__ )
 #endif
-#if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS
+#if defined(THERMO_CS1) &&  THERMO_CS1 >= 0
-  REPORT_NAME_ANALOG(TC1, __LINE__ )
+  REPORT_NAME_DIGITAL(THERMO_CS1, __LINE__ )
-#endif
-#if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TC2, __LINE__ )
-#endif
-#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(FILWIDTH_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_0_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_1_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_2_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_3_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS
+#if defined(THERMO_CS2) &&  THERMO_CS2 >= 0
-  REPORT_NAME_ANALOG(TEMP_4_PIN, __LINE__ )
+  REPORT_NAME_DIGITAL(THERMO_CS2, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_5) && TEMP_5_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_5_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_6) && TEMP_6_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_6_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_7) && TEMP_7_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_7_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_BED_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_CHAMBER_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN < NUM_ANALOG_INPUTS
-  REPORT_NAME_ANALOG(TEMP_X_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(THERMO_DO)
   REPORT_NAME_DIGITAL(THERMO_DO_PIN, __LINE__ )
@@ -617,18 +641,42 @@
 #if PIN_EXISTS(THERMO_SCK)
   REPORT_NAME_DIGITAL(THERMO_SCK_PIN, __LINE__ )
 #endif
+#if defined(TLC_BLANK_BIT) &&  TLC_BLANK_BIT >= 0
+  REPORT_NAME_DIGITAL(TLC_BLANK_BIT, __LINE__ )
+#endif
 #if PIN_EXISTS(TLC_BLANK)
   REPORT_NAME_DIGITAL(TLC_BLANK_PIN, __LINE__ )
 #endif
+#if defined(TLC_BLANK_PORT) &&  TLC_BLANK_PORT >= 0
+  REPORT_NAME_DIGITAL(TLC_BLANK_PORT, __LINE__ )
+#endif
+#if defined(TLC_CLOCK_BIT) &&  TLC_CLOCK_BIT >= 0
+  REPORT_NAME_DIGITAL(TLC_CLOCK_BIT, __LINE__ )
+#endif
 #if PIN_EXISTS(TLC_CLOCK)
   REPORT_NAME_DIGITAL(TLC_CLOCK_PIN, __LINE__ )
 #endif
+#if defined(TLC_CLOCK_PORT) &&  TLC_CLOCK_PORT >= 0
+  REPORT_NAME_DIGITAL(TLC_CLOCK_PORT, __LINE__ )
+#endif
+#if defined(TLC_DATA_BIT) &&  TLC_DATA_BIT >= 0
+  REPORT_NAME_DIGITAL(TLC_DATA_BIT, __LINE__ )
+#endif
 #if PIN_EXISTS(TLC_DATA)
   REPORT_NAME_DIGITAL(TLC_DATA_PIN, __LINE__ )
 #endif
+#if defined(TLC_DATA_PORT) &&  TLC_DATA_PORT >= 0
+  REPORT_NAME_DIGITAL(TLC_DATA_PORT, __LINE__ )
+#endif
+#if defined(TLC_XLAT_BIT) &&  TLC_XLAT_BIT >= 0
+  REPORT_NAME_DIGITAL(TLC_XLAT_BIT, __LINE__ )
+#endif
 #if PIN_EXISTS(TLC_XLAT)
   REPORT_NAME_DIGITAL(TLC_XLAT_PIN, __LINE__ )
 #endif
+#if defined(TLC_XLAT_PORT) &&  TLC_XLAT_PORT >= 0
+  REPORT_NAME_DIGITAL(TLC_XLAT_PORT, __LINE__ )
+#endif
 #if PIN_EXISTS(TOOL_0)
   REPORT_NAME_DIGITAL(TOOL_0_PIN, __LINE__ )
 #endif
@@ -659,13 +707,13 @@
 #if PIN_EXISTS(TX_ENABLE)
   REPORT_NAME_DIGITAL(TX_ENABLE_PIN, __LINE__ )
 #endif
-#if defined(UI1) && UI1 >= 0
+#if defined(UI1) &&  UI1 >= 0
   REPORT_NAME_DIGITAL(UI1, __LINE__ )
 #endif
-#if defined(UI2) && UI2 >= 0
+#if defined(UI2) &&  UI2 >= 0
   REPORT_NAME_DIGITAL(UI2, __LINE__ )
 #endif
-#if defined(UNUSED_PWM) && UNUSED_PWM >= 0
+#if defined(UNUSED_PWM) &&  UNUSED_PWM >= 0
   REPORT_NAME_DIGITAL(UNUSED_PWM, __LINE__ )
 #endif
 #if PIN_EXISTS(X_ATT)
@@ -698,15 +746,6 @@
 #if PIN_EXISTS(X_STOP)
   REPORT_NAME_DIGITAL(X_STOP_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(X2_DIR)
-  REPORT_NAME_DIGITAL(X2_DIR_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(X2_ENABLE)
-  REPORT_NAME_DIGITAL(X2_ENABLE_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(X2_STEP)
-  REPORT_NAME_DIGITAL(X2_STEP_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(Y_ATT)
   REPORT_NAME_DIGITAL(Y_ATT_PIN, __LINE__ )
 #endif
@@ -737,15 +776,6 @@
 #if PIN_EXISTS(Y_STOP)
   REPORT_NAME_DIGITAL(Y_STOP_PIN, __LINE__ )
 #endif
-#if PIN_EXISTS(Y2_DIR)
-  REPORT_NAME_DIGITAL(Y2_DIR_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(Y2_ENABLE)
-  REPORT_NAME_DIGITAL(Y2_ENABLE_PIN, __LINE__ )
-#endif
-#if PIN_EXISTS(Y2_STEP)
-  REPORT_NAME_DIGITAL(Y2_STEP_PIN, __LINE__ )
-#endif
 #if PIN_EXISTS(Z_ATT)
   REPORT_NAME_DIGITAL(Z_ATT_PIN, __LINE__ )
 #endif
@@ -773,19 +803,39 @@
 #if PIN_EXISTS(Z_MS2)
   REPORT_NAME_DIGITAL(Z_MS2_PIN, __LINE__ )
 #endif
+#if defined(Z_probe_pin) &&  Z_probe_pin >= 0
+  REPORT_NAME_DIGITAL(Z_probe_pin, __LINE__ )
+#endif
 #if PIN_EXISTS(Z_STEP)
   REPORT_NAME_DIGITAL(Z_STEP_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(Z_STOP)
   REPORT_NAME_DIGITAL(Z_STOP_PIN, __LINE__ )
 #endif
+#if PIN_EXISTS(Z2_CS)
+  REPORT_NAME_DIGITAL(Z2_CS_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(Z2_DIR)
   REPORT_NAME_DIGITAL(Z2_DIR_PIN, __LINE__ )
 #endif
 #if PIN_EXISTS(Z2_ENABLE)
   REPORT_NAME_DIGITAL(Z2_ENABLE_PIN, __LINE__ )
 #endif
+#if PIN_EXISTS(Z2_MS1)
+  REPORT_NAME_DIGITAL(Z2_MS1_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(Z2_MS2)
+  REPORT_NAME_DIGITAL(Z2_MS2_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(Z2_MS3)
+  REPORT_NAME_DIGITAL(Z2_MS3_PIN, __LINE__ )
+#endif
 #if PIN_EXISTS(Z2_STEP)
   REPORT_NAME_DIGITAL(Z2_STEP_PIN, __LINE__ )
 #endif
-
+#if PIN_EXISTS(ZRIB_V20_D6)
+  REPORT_NAME_DIGITAL(ZRIB_V20_D6_PIN, __LINE__ )
+#endif
+#if PIN_EXISTS(ZRIB_V20_D9)
+  REPORT_NAME_DIGITAL(ZRIB_V20_D9_PIN, __LINE__ )
+#endif

Marlin/pins_RAMPS_RE_ARM.h

@@ -194,11 +194,9 @@
 //
 #if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
   #if !defined(NUM_SERVOS) || NUM_SERVOS == 1 // must use servo connector
-    #undef  SERVO0
     #undef  SERVO1
     #undef  SERVO2
     #undef  SERVO3
-    #define SERVO0    4
     #define SPINDLE_LASER_ENABLE_PIN  6  // Pin should have a pullup/pulldown!
     #define SPINDLE_LASER_PWM_PIN     4  // MUST BE HARDWARE PWM
     #define SPINDLE_DIR_PIN           5
@@ -214,16 +212,20 @@
 /**
  * LCD / Controller
  *
+ * All controllers can use J3 and J5 on the Re-ARM board.  Custom cabling will be required.
+ */
+ 
+/** 
+ * Smart LCD adapter 
+ *
  * The Smart LCD adapter can be used for the two 10 pin LCD controllers such as
  * REPRAP_DISCOUNT_SMART_CONTROLLER.  It can't be used for controllers that use
  * DOGLCD_A0, DOGLCD_CS, LCD_PINS_D5, LCD_PINS_D6 or LCD_PINS_D7. A custom cable
  * is needed to pick up 5V for the EXP1 connection.
  *
- * All controllers can use J3 and J5 on the Re-ARM board.  Custom cabling will be required.
+ * SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines
- *
+ * on the LCD display during accesses of the SD card. The menus/code has been arranged so 
- * SD card on the LCD is not yet supported.
+ * that the garbage/lines are erased immediately after the SD card accesses are completed.
- *
- * SD card on the LCD uses the same SPI signals as the LCD.
  */
 
 #if ENABLED(ULTRA_LCD)
@@ -243,6 +245,24 @@
     //#define SHIFT_EN            41  // J5-4 & AUX-4
   #endif
 
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && ENABLED(SDSUPPORT)
+    #define SDCARD_SORT_ALPHA           // Using SORT feature to keep one directory level in RAM
+                                        // When going up/down directory levels the SD card is
+                                        // accessed but the garbage/lines are removed when the 
+                                        // LCD updates
+
+    // SD Card Sorting options
+    #if ENABLED(SDCARD_SORT_ALPHA)
+      #define SDSORT_LIMIT       255    // Maximum number of sorted items (10-256).
+      #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
+      #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+      #define SDSORT_USES_RAM    true   // Pre-allocate a static array for faster pre-sorting.
+      #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+      #define SDSORT_CACHE_NAMES true   // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+      #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #endif
+  #endif
+  
   #define BTN_EN1             31  // J3-2 & AUX-4
   #define BTN_EN2             33  // J3-4 & AUX-4
   #define BTN_ENC             35  // J3-3 & AUX-4
@@ -300,6 +320,26 @@
 #define ENET_TXD0   78  // J12-11
 #define ENET_TXD1   79  // J12-12
 
+/**
+ *  PWMS
+ *
+ *  There are 6 PWMS.  Each PWM can be assigned to one of two pins.
+ *
+ *  SERVO2 does NOT have a PWM assigned to it.
+ *
+ *  PWM1.1   DIO4    SERVO3_PIN       FIL_RUNOUT_PIN   5V output, PWM
+ *  PWM1.1   DIO26   E0_STEP_PIN
+ *  PWM1.2   DIO11   SERVO0_PIN
+ *  PWM1.2   DIO54   X_STEP_PIN
+ *  PWM1.3   DIO6    SERVO1_PIN       J5-1
+ *  PWM1.3   DIO60   Y_STEP_PIN
+ *  PWM1.4   DIO53   SDSS(SSEL0)      J3-5  AUX-3
+ *  PWM1.4   DIO46   Z_STEP_PIN
+ *  PWM1.5   DIO3    X_MIN_PIN        10K PULLUP TO 3.3v, 1K SERIES
+ *  PWM1.5   DIO9    RAMPS_D9_PIN
+ *  PWM1.6   DIO14   Y_MIN_PIN        10K PULLUP TO 3.3v, 1K SERIES
+ *  PWM1.6   DIO10   RAMPS_D10_PIN
+ */
 
 /**
  *  The following pins are NOT available in a Re-ARM system

Marlin/src/HAL/HAL_AVR/SanityCheck_AVR_8_bit.h

@@ -0,0 +1,102 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Test AVR specific configuration values for errors at compile-time.
+ */
+
+/**
+ * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
+ */
+
+
+/**
+ * Digipot requirement
+ */
+ #if ENABLED(DIGIPOT_MCP4018)
+  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
+    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
+      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
+  #endif
+#endif
+
+
+
+/**
+ * Sanity checks for Spindle / Laser
+ */
+
+#if ENABLED(SPINDLE_LASER_ENABLE)
+  #if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
+    #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
+  #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
+    #error "SPINDLE_DIR_PIN not defined."
+  #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
+    #if !(WITHIN(SPINDLE_LASER_PWM_PIN, 2, 13) || WITHIN(SPINDLE_LASER_PWM_PIN, 44, 46))
+      #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
+    #elif SPINDLE_LASER_POWERUP_DELAY < 1
+      #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
+    #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
+      #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
+    #elif !defined(SPINDLE_LASER_PWM_INVERT)
+      #error "SPINDLE_LASER_PWM_INVERT missing."
+    #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
+      #error "SPINDLE_LASER_PWM equation constant(s) missing."
+    #elif SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
+      #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
+    #elif PIN_EXISTS(X_MAX) && X_MAX_PIN == SPINDLE_LASER_PWM_PIN
+      #error "SPINDLE_LASER_PWM pin is in use by X_MAX endstop."
+    #elif PIN_EXISTS(X_MIN) && X_MIN_PIN == SPINDLE_LASER_PWM_PIN
+      #error "SPINDLE_LASER_PWM pin is in use by X_MIN endstop."
+    #elif PIN_EXISTS(Z_STEP) && Z_STEP_PIN == SPINDLE_LASER_PWM_PIN
+      #error "SPINDLE_LASER_PWM pin in use by Z_STEP."
+    #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+      #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
+    #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
+    #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
+    #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
+    #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
+    #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
+    #elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_XY."
+    #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_Z_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_Z."
+    #elif PIN_EXISTS(MOTOR_CURRENT_PWM_E) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_E_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_E."
+    #endif
+  #endif
+#endif // SPINDLE_LASER_ENABLE

Marlin/src/HAL/HAL_AVR/pinsDebug_AVR_8_bit.h

@@ -0,0 +1,397 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * PWM print routines for Atmel 8 bit AVR CPUs
+ */
+
+
+#define AVR_ATmega2560_FAMILY_PLUS_70 (MOTHERBOARD == BOARD_BQ_ZUM_MEGA_3D \
+|| MOTHERBOARD == BOARD_MIGHTYBOARD_REVE \
+|| MOTHERBOARD == BOARD_MINIRAMBO \
+|| MOTHERBOARD == BOARD_SCOOVO_X9H)
+
+#if AVR_AT90USB1286_FAMILY
+  // Working with Teensyduino extension so need to re-define some things
+  #include "pinsDebug_Teensyduino.h"
+  // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
+  // portModeRegister takes a different argument
+  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
+  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p)
+  #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+#elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
+  #include "pinsDebug_plus_70.h"
+  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
+  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
+  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+
+#else
+  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
+  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+#endif
+
+#define VALID_PIN(pin)) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
+#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
+#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7)))
+#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+
+void PRINT_ARRAY_NAME(uint8_t x) {
+  char *name_mem_pointer = (char*)pgm_read_word(&pin_array[x].name);
+  for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) {
+    char temp_char = pgm_read_byte(name_mem_pointer + y);
+    if (temp_char != 0)
+      MYSERIAL.write(temp_char);
+    else {
+      for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; i++) MYSERIAL.write(' ');
+      break;
+    }
+  }
+}
+
+#define GET_ARRAY_IS_DIGITAL(x)   pgm_read_byte(&pin_array[x].is_digital)
+
+
+#if defined(__AVR_ATmega1284P__)  // 1284 IDE extensions set this to the number of
+  #undef NUM_DIGITAL_PINS         // digital only pins while all other CPUs have it
+  #define NUM_DIGITAL_PINS 32     // set to digital only + digital/analog
+#endif
+
+#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM:  %4d"), V); SERIAL_ECHO(buffer); }while(0)
+#define PWM_CASE(N,Z)                                           \
+  case TIMER##N##Z:                                             \
+    if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \
+      PWM_PRINT(OCR##N##Z);                                     \
+      return true;                                              \
+    } else return false
+
+
+
+/**
+ * Print a pin's PWM status.
+ * Return true if it's currently a PWM pin.
+ */
+static bool pwm_status(uint8_t pin) {
+  char buffer[20];   // for the sprintf statements
+
+  switch (digitalPinToTimer_DEBUG(pin)) {
+
+    #if defined(TCCR0A) && defined(COM0A1)
+      #ifdef TIMER0A
+        #if !AVR_AT90USB1286_FAMILY  // not available in Teensyduino type IDEs
+          PWM_CASE(0, A);
+        #endif
+      #endif
+      PWM_CASE(0, B);
+    #endif
+
+    #if defined(TCCR1A) && defined(COM1A1)
+      PWM_CASE(1, A);
+      PWM_CASE(1, B);
+     #if defined(COM1C1) && defined(TIMER1C)
+      PWM_CASE(1, C);
+     #endif
+    #endif
+
+    #if defined(TCCR2A) && defined(COM2A1)
+      PWM_CASE(2, A);
+      PWM_CASE(2, B);
+    #endif
+
+    #if defined(TCCR3A) && defined(COM3A1)
+      PWM_CASE(3, A);
+      PWM_CASE(3, B);
+      #ifdef COM3C1
+        PWM_CASE(3, C);
+      #endif
+    #endif
+
+    #ifdef TCCR4A
+      PWM_CASE(4, A);
+      PWM_CASE(4, B);
+      PWM_CASE(4, C);
+    #endif
+
+    #if defined(TCCR5A) && defined(COM5A1)
+      PWM_CASE(5, A);
+      PWM_CASE(5, B);
+      PWM_CASE(5, C);
+    #endif
+
+    case NOT_ON_TIMER:
+    default:
+      return false;
+  }
+  SERIAL_PROTOCOL_SP(2);
+} // pwm_status
+
+
+const volatile uint8_t* const PWM_other[][3] PROGMEM = {
+    { &TCCR0A, &TCCR0B, &TIMSK0 },
+    { &TCCR1A, &TCCR1B, &TIMSK1 },
+  #if defined(TCCR2A) && defined(COM2A1)
+    { &TCCR2A, &TCCR2B, &TIMSK2 },
+  #endif
+  #if defined(TCCR3A) && defined(COM3A1)
+    { &TCCR3A, &TCCR3B, &TIMSK3 },
+  #endif
+  #ifdef TCCR4A
+    { &TCCR4A, &TCCR4B, &TIMSK4 },
+  #endif
+  #if defined(TCCR5A) && defined(COM5A1)
+    { &TCCR5A, &TCCR5B, &TIMSK5 },
+  #endif
+};
+
+
+const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
+
+  #ifdef TIMER0A
+    { &OCR0A, &OCR0B, 0 },
+  #else
+    { 0, &OCR0B, 0 },
+  #endif
+
+  #if defined(COM1C1) && defined(TIMER1C)
+   { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, (const uint8_t*)&OCR1C },
+  #else
+   { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, 0 },
+  #endif
+
+  #if defined(TCCR2A) && defined(COM2A1)
+    { &OCR2A, &OCR2B, 0 },
+  #endif
+
+  #if defined(TCCR3A) && defined(COM3A1)
+    #ifdef COM3C1
+      { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, (const uint8_t*)&OCR3C },
+    #else
+      { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, 0 },
+    #endif
+  #endif
+
+  #ifdef TCCR4A
+    { (const uint8_t*)&OCR4A, (const uint8_t*)&OCR4B, (const uint8_t*)&OCR4C },
+  #endif
+
+  #if defined(TCCR5A) && defined(COM5A1)
+    { (const uint8_t*)&OCR5A, (const uint8_t*)&OCR5B, (const uint8_t*)&OCR5C },
+  #endif
+};
+
+
+#define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
+#define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
+#define TIMSK(T)    pgm_read_word(&PWM_other[T][2])
+#define CS_0       0
+#define CS_1       1
+#define CS_2       2
+#define WGM_0      0
+#define WGM_1      1
+#define WGM_2      3
+#define WGM_3      4
+#define TOIE       0
+
+#define OCR_VAL(T, L)   pgm_read_word(&PWM_OCR[T][L])
+
+static void err_is_counter()     { SERIAL_PROTOCOLPGM("   non-standard PWM mode"); }
+static void err_is_interrupt()   { SERIAL_PROTOCOLPGM("   compare interrupt enabled"); }
+static void err_prob_interrupt() { SERIAL_PROTOCOLPGM("   overflow interrupt enabled"); }
+static void print_is_also_tied() { SERIAL_PROTOCOLPGM(" is also tied to this pin"); SERIAL_PROTOCOL_SP(14); }
+
+void com_print(uint8_t N, uint8_t Z) {
+  const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
+  SERIAL_PROTOCOLPGM("    COM");
+  SERIAL_PROTOCOLCHAR(N + '0');
+  switch (Z) {
+    case 'A':
+      SERIAL_PROTOCOLPAIR("A: ", ((*TCCRA & (_BV(7) | _BV(6))) >> 6));
+      break;
+    case 'B':
+      SERIAL_PROTOCOLPAIR("B: ", ((*TCCRA & (_BV(5) | _BV(4))) >> 4));
+      break;
+    case 'C':
+      SERIAL_PROTOCOLPAIR("C: ", ((*TCCRA & (_BV(3) | _BV(2))) >> 2));
+      break;
+  }
+}
+
+void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N - WGM bit layout
+  char buffer[20];   // for the sprintf statements
+  const uint8_t *TCCRB = (uint8_t*)TCCR_B(T),
+                *TCCRA = (uint8_t*)TCCR_A(T);
+  uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
+  if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
+
+  SERIAL_PROTOCOLPGM("    TIMER");
+  SERIAL_PROTOCOLCHAR(T + '0');
+  SERIAL_PROTOCOLCHAR(L);
+  SERIAL_PROTOCOL_SP(3);
+
+  if (N == 3) {
+    const uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A');
+    PWM_PRINT(*OCRVAL8);
+  }
+  else {
+    const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
+    PWM_PRINT(*OCRVAL16);
+  }
+  SERIAL_PROTOCOLPAIR("    WGM: ", WGM);
+  com_print(T,L);
+  SERIAL_PROTOCOLPAIR("    CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
+
+  SERIAL_PROTOCOLPGM("    TCCR");
+  SERIAL_PROTOCOLCHAR(T + '0');
+  SERIAL_PROTOCOLPAIR("A: ", *TCCRA);
+
+  SERIAL_PROTOCOLPGM("    TCCR");
+  SERIAL_PROTOCOLCHAR(T + '0');
+  SERIAL_PROTOCOLPAIR("B: ", *TCCRB);
+
+  const uint8_t *TMSK = (uint8_t*)TIMSK(T);
+  SERIAL_PROTOCOLPGM("    TIMSK");
+  SERIAL_PROTOCOLCHAR(T + '0');
+  SERIAL_PROTOCOLPAIR(": ", *TMSK);
+
+  const uint8_t OCIE = L - 'A' + 1;
+  if (N == 3) { if (WGM == 0 || WGM == 2 || WGM ==  4 || WGM ==  6) err_is_counter(); }
+  else        { if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) err_is_counter(); }
+  if (TEST(*TMSK, OCIE)) err_is_interrupt();
+  if (TEST(*TMSK, TOIE)) err_prob_interrupt();
+}
+
+static void pwm_details(uint8_t pin) {
+  switch (digitalPinToTimer_DEBUG(pin)) {
+
+    #if defined(TCCR0A) && defined(COM0A1)
+      #ifdef TIMER0A
+        #if !AVR_AT90USB1286_FAMILY  // not available in Teensyduino type IDEs
+          case TIMER0A: timer_prefix(0, 'A', 3); break;
+        #endif
+      #endif
+      case TIMER0B: timer_prefix(0, 'B', 3); break;
+    #endif
+
+    #if defined(TCCR1A) && defined(COM1A1)
+      case TIMER1A: timer_prefix(1, 'A', 4); break;
+      case TIMER1B: timer_prefix(1, 'B', 4); break;
+      #if defined(COM1C1) && defined(TIMER1C)
+        case TIMER1C: timer_prefix(1, 'C', 4); break;
+      #endif
+    #endif
+
+    #if defined(TCCR2A) && defined(COM2A1)
+      case TIMER2A: timer_prefix(2, 'A', 3); break;
+      case TIMER2B: timer_prefix(2, 'B', 3); break;
+    #endif
+
+    #if defined(TCCR3A) && defined(COM3A1)
+      case TIMER3A: timer_prefix(3, 'A', 4); break;
+      case TIMER3B: timer_prefix(3, 'B', 4); break;
+      #ifdef COM3C1
+        case TIMER3C: timer_prefix(3, 'C', 4); break;
+      #endif
+    #endif
+
+    #ifdef TCCR4A
+      case TIMER4A: timer_prefix(4, 'A', 4); break;
+      case TIMER4B: timer_prefix(4, 'B', 4); break;
+      case TIMER4C: timer_prefix(4, 'C', 4); break;
+    #endif
+
+    #if defined(TCCR5A) && defined(COM5A1)
+      case TIMER5A: timer_prefix(5, 'A', 4); break;
+      case TIMER5B: timer_prefix(5, 'B', 4); break;
+      case TIMER5C: timer_prefix(5, 'C', 4); break;
+    #endif
+
+    case NOT_ON_TIMER: break;
+
+  }
+  SERIAL_PROTOCOLPGM("  ");
+
+  // on pins that have two PWMs, print info on second PWM
+  #if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY
+    // looking for port B7 - PWMs 0A and 1C
+    if (digitalPinToPort_DEBUG(pin) == 'B' - 64 && 0x80 == digitalPinToBitMask_DEBUG(pin)) {
+      #if !AVR_AT90USB1286_FAMILY
+        SERIAL_PROTOCOLPGM("\n .");
+        SERIAL_PROTOCOL_SP(18);
+        SERIAL_PROTOCOLPGM("TIMER1C");
+        print_is_also_tied();
+        timer_prefix(1, 'C', 4);
+      #else
+        SERIAL_PROTOCOLPGM("\n .");
+        SERIAL_PROTOCOL_SP(18);
+        SERIAL_PROTOCOLPGM("TIMER0A");
+        print_is_also_tied();
+        timer_prefix(0, 'A', 3);
+      #endif
+    }
+  #endif
+} // pwm_details
+
+
+#ifndef digitalRead_mod                   // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
+  int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed
+    const uint8_t port = digitalPinToPort_DEBUG(pin);
+    return (port != NOT_A_PIN) && (*portInputRegister(port) & digitalPinToBitMask_DEBUG(pin)) ? HIGH : LOW;
+  }
+#endif
+
+#ifndef PRINT_PORT(p)
+  void print_port(int8_t pin) {   // print port number
+    #ifdef digitalPinToPort_DEBUG
+      uint8_t x;
+      SERIAL_PROTOCOLPGM("  Port: ");
+      #if AVR_AT90USB1286_FAMILY
+        x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64;
+      #else
+        x = digitalPinToPort_DEBUG(pin) + 64;
+      #endif
+      SERIAL_CHAR(x);
+
+      #if AVR_AT90USB1286_FAMILY
+        if (pin == 46)
+          x = '2';
+        else if (pin == 47)
+          x = '3';
+        else {
+          uint8_t temp = digitalPinToBitMask_DEBUG(pin);
+          for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1;
+        }
+      #else
+        uint8_t temp = digitalPinToBitMask_DEBUG(pin);
+        for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1;
+      #endif
+      SERIAL_CHAR(x);
+    #else
+      SERIAL_PROTOCOL_SP(10);
+    #endif
+  }
+  
+  #define PRINT_PORT(p) print_port(p)
+#endif

Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h

@@ -25,16 +25,21 @@
 //  do not function the same as the other Arduino extensions
 //
 
-#ifndef __PINSDEBUG_TEENSYDUINO_H__
-#define __PINSDEBUG_TEENSYDUINO_H__
 
-#undef NUM_DIGITAL_PINS
+#define TEENSYDUINO_IDE
-#define NUM_DIGITAL_PINS 48  // Teensy says 46 but FASTIO is 48
 
-// "digitalPinToPort" function just returns the pin number so need to create our own.
+//digitalPinToTimer(pin) function works like Arduino but Timers are not defined
-// Can't use the name "digitalPinToPort" for our own because it interferes with the
+#define TIMER0B 1
-// FAST_PWM_FAN function if we do
+#define TIMER1A 7
+#define TIMER1B 8
+#define TIMER1C 9
+#define TIMER2A 6
+#define TIMER2B 2
+#define TIMER3A 5
+#define TIMER3B 4
+#define TIMER3C 3
 
+// digitalPinToPort function just returns the pin number so need to create our own
 #define PA 1
 #define PB 2
 #define PC 3
@@ -42,8 +47,9 @@
 #define PE 5
 #define PF 6
 
+#undef digitalPinToPort
 
-const uint8_t PROGMEM digital_pin_to_port_PGM_Teensy[] = {
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
   PD, // 0  - PD0 - INT0 - PWM
   PD, // 1  - PD1 - INT1 - PWM
   PD, // 2  - PD2 - INT2 - RX
@@ -94,7 +100,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM_Teensy[] = {
   PE, // 47 - PE3 (not defined in teensyduino)
 };
 
-#define digitalPinToPort_Teensy(P) ( pgm_read_byte( digital_pin_to_port_PGM_Teensy + (P) ) )
+#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
 
 // digitalPinToBitMask(pin) is OK
 
@@ -102,5 +108,3 @@ const uint8_t PROGMEM digital_pin_to_port_PGM_Teensy[] = {
                                              // disable the PWMs so we can use it as is
 
 // portModeRegister(pin) is OK
-
-#endif // __PINSDEBUG_TEENSYDUINO_H__

Marlin/src/HAL/HAL_DUE/SanityCheck_Due.h

@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Test Arduino Due specific configuration values for errors at compile-time.
+ */
+
+/**
+ * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
+ */

Marlin/src/HAL/HAL_LPC1768/SanityCheck_Re_ARM.h

@@ -0,0 +1,71 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Test Re-ARM specific configuration values for errors at compile-time.
+ */
+
+/**
+ * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
+ */
+
+#if ENABLED(SPINDLE_LASER_ENABLE)
+  #if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
+    #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
+  #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
+    #error "SPINDLE_DIR_PIN not defined."
+  #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
+    #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
+      #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
+    #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+      #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+    #elif SPINDLE_LASER_POWERUP_DELAY < 1
+      #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
+    #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
+      #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
+    #elif !defined(SPINDLE_LASER_PWM_INVERT)
+      #error "SPINDLE_LASER_PWM_INVERT missing."
+    #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
+      #error "SPINDLE_LASER_PWM equation constant(s) missing."
+    #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
+    #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
+    #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
+    #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
+    #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
+    #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
+      #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
+    #endif
+  #endif
+#endif // SPINDLE_LASER_ENABLE

Marlin/src/HAL/HAL_LPC1768/arduino.cpp

@@ -22,8 +22,8 @@
 
 #ifdef TARGET_LPC1768
 #include <lpc17xx_pinsel.h>
-#include "../../../macros.h"
 #include "HAL.h"
+#include "../../macros.h"
 
 // Interrupts
 void cli(void) { __disable_irq(); } // Disable

Marlin/src/HAL/HAL_LPC1768/pinmap_re_arm.h

@@ -63,7 +63,6 @@ const adc_pin_data adc_pin_map[] = {
 #define VALID_PIN(r)  (r <   0 ? 0 :\
                        r ==  7 ? 0 :\
                        r == 17 ? 0 :\
-                       r == 17 ? 0 :\
                        r == 22 ? 0 :\
                        r == 23 ? 0 :\
                        r == 25 ? 0 :\
@@ -82,6 +81,20 @@ const adc_pin_data adc_pin_map[] = {
                        r == 66 ? 0 :\
                        r >= NUM_DIGITAL_PINS ? 0 : 1)
 
+#define PWM_PIN(r)  (r <   0 ? 0 :\
+                       r ==  3 ? 1 :\
+                       r ==  4 ? 1 :\
+                       r ==  6 ? 1 :\
+                       r ==  9 ? 1 :\
+                       r == 10 ? 1 :\
+                       r == 11 ? 1 :\
+                       r == 14 ? 1 :\
+                       r == 26 ? 1 :\
+                       r == 46 ? 1 :\
+                       r == 53 ? 1 :\
+                       r == 54 ? 1 :\
+                       r == 60 ? 1 : 0)
+
 const pin_data pin_map[] = { // pin map for variable pin function
   {0,3},        //  DIO0   RXD0             A6               J4-4                           AUX-1
   {0,2},        //  DIO1   TXD0             A7               J4-5                           AUX-1

Marlin/src/HAL/HAL_LPC1768/pinmapping.h

@@ -27,7 +27,7 @@
 struct pin_data { uint8_t port, pin; };
 struct adc_pin_data { uint8_t port, pin, adc; };
 
-#if ENABLED(IS_REARM)
+#if defined(IS_REARM)
   #include "pinmap_re_arm.h"
 #else
   #error "HAL: LPC1768: No defined pin-mapping"

Marlin/src/HAL/HAL_LPC1768/pinsDebug_Re_ARM.h

@@ -1,5 +1,5 @@
 /**
-  * Marlin 3D Printer Firmware
+ * Marlin 3D Printer Firmware
  * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
@@ -19,68 +19,60 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
- 
+
 /**
  * Support routines for Re-ARM board
- */
+*/
-
 
- 
+bool pin_Re_ARM_output;
-typedef struct {
+bool pin_Re_ARM_analog;
-  int8_t pin;
+int8_t pin_Re_ARM_pin;
-  bool output;
-  bool analog;
-  uint8_t resistors;
-  bool open_drain;
-  char function_string[15];
-} pin_info;
 
-pin_info pin_Re_ARM;
- 
 void get_pin_info(int8_t pin) {
-  pin_Re_ARM.analog = 0;
+
-  pin_Re_ARM.pin = pin;
+if (pin == 7) return;
+  pin_Re_ARM_analog = 0;
+  pin_Re_ARM_pin = pin;
   int8_t pin_port = pin_map[pin].port;
   int8_t pin_port_pin = pin_map[pin].pin;
- 
   // active ADC function/mode/code values for PINSEL registers
   int8_t ADC_pin_mode = pin_port == 0 && pin_port_pin == 2  ? 2 :
                         pin_port == 0 && pin_port_pin == 3  ? 2 :
-                        pin_port == 0 && pin_port_pin == 23 ? 1 : 
+                        pin_port == 0 && pin_port_pin == 23 ? 1 :
                         pin_port == 0 && pin_port_pin == 24 ? 1 :
                         pin_port == 0 && pin_port_pin == 25 ? 1 :
                         pin_port == 0 && pin_port_pin == 26 ? 1 :
                         pin_port == 1 && pin_port_pin == 30 ? 3 :
-                        pin_port == 1 && pin_port_pin == 31 ? 3 : -1;       
+                        pin_port == 1 && pin_port_pin == 31 ? 3 : -1;
-  //get appropriate PINSEL register                                         
+  //get appropriate PINSEL register
   volatile uint32_t * pinsel_reg = (pin_port == 0 && pin_port_pin <= 15) ? &LPC_PINCON->PINSEL0 :
                                    (pin_port == 0)                       ? &LPC_PINCON->PINSEL1 :
                                    (pin_port == 1 && pin_port_pin <= 15) ? &LPC_PINCON->PINSEL2 :
                                     pin_port == 1                        ? &LPC_PINCON->PINSEL3 :
                                     pin_port == 2                        ? &LPC_PINCON->PINSEL4 :
-                                    pin_port == 3                        ? &LPC_PINCON->PINSEL7 : &LPC_PINCON->PINSEL9;                                                    
+                                    pin_port == 3                        ? &LPC_PINCON->PINSEL7 : &LPC_PINCON->PINSEL9;
-
   uint8_t pinsel_start_bit = pin_port_pin > 15 ? 2 * (pin_port_pin - 16) : 2 * pin_port_pin;
   uint8_t pin_mode = (uint8_t) ((*pinsel_reg >> pinsel_start_bit) & 0x3);
-  
   uint32_t * FIO_reg[5] PROGMEM = {(uint32_t*) 0x2009C000,(uint32_t*)  0x2009C020,(uint32_t*)  0x2009C040,(uint32_t*)  0x2009C060,(uint32_t*)  0x2009C080};
-  pin_Re_ARM.output = (*FIO_reg[pin_map[pin].port] >> pin_map[pin].pin) & 1; //input/output state except if active ADC
+  pin_Re_ARM_output = (*FIO_reg[pin_map[pin].port] >> pin_map[pin].pin) & 1; //input/output state except if active ADC
 
   if (pin_mode) {  // if function/mode/code value not 0 then could be an active analog channel
     if (ADC_pin_mode == pin_mode) {  // found an active analog pin
-      pin_Re_ARM.output = 0;
+      pin_Re_ARM_output = 0;
-      pin_Re_ARM.analog = 1;
+      pin_Re_ARM_analog = 1;
-    }  
+    }
   }
 }
 
 /**
  * translation of routines & variables used by pinsDebug.h
  */
- 
+
+#define pwm_details(pin) pin = pin    // do nothing  // print PWM details
+#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin.
 #define GET_PIN_INFO(pin) get_pin_info(pin)
 #define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
-#define GET_PINMODE(pin) pin_Re_ARM.output
+#define GET_PINMODE(pin) pin_Re_ARM_output
 #define digitalRead_mod(p)  digitalRead(p)
 #define digitalPinToPort_DEBUG(p)  0
 #define digitalPinToBitMask_DEBUG(pin) 0
@@ -89,4 +81,4 @@ void get_pin_info(int8_t pin) {
 #define NAME_FORMAT(p) PSTR("%-##p##s")
 //  #define PRINT_ARRAY_NAME(x)  do {sprintf_P(buffer, NAME_FORMAT(MAX_NAME_LENGTH) , pin_array[x].name); SERIAL_ECHO(buffer);} while (0)
 #define PRINT_ARRAY_NAME(x)  do {sprintf_P(buffer, PSTR("%-35s") , pin_array[x].name); SERIAL_ECHO(buffer);} while (0)
-#define GET_ARRAY_IS_DIGITAL(x)  !pin_Re_ARM.analog
+#define GET_ARRAY_IS_DIGITAL(x)  !pin_Re_ARM_analog

Marlin/src/HAL/HAL_SanityCheck.h

@@ -0,0 +1,37 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef HAL_SANITYCHECK_H
+
+#ifdef ARDUINO_ARCH_AVR
+  #include "HAL_AVR/SanityCheck_AVR_8_bit.h"
+#elif defined(ARDUINO_ARCH_SAM)
+  #include "HAL_DUE/SanityCheck_Due.h"
+#elif IS_32BIT_TEENSY
+  #include "HAL_TEENSY35_36/SanityCheck_Teensy_35_36.h"
+#elif defined(TARGET_LPC1768)
+  #include "HAL_LPC1768/SanityCheck_Re_ARM.h"
+#else
+  #error Unsupported Platform!
+#endif
+ 
+#endif

Marlin/src/HAL/HAL_TEENSY35_36/SanityCheck_Teensy_35_36.h

@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Test TEENSY35_36 specific configuration values for errors at compile-time.
+ */
+
+/**
+ * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
+ */

Marlin/src/HAL/HAL_pinsDebug.h

@@ -22,16 +22,18 @@
 
 #ifndef HAL_PINSDEBUG_H
 
-#ifdef ARDUINO_ARCH_AVR
+#if defined(PINS_DEBUGGING)
-  #include "HAL_AVR/HAL_pinsDebug_AVR.h"
+  #ifdef ARDUINO_ARCH_AVR
-#elif defined(ARDUINO_ARCH_SAM)
+    #include "HAL_AVR/pinsDebug_AVR_8_bit.h"
-  #include "HAL_DUE/HAL_pinsDebug_Due.h"
+  #elif defined(ARDUINO_ARCH_SAM)
-#elif IS_32BIT_TEENSY
+    #include "HAL_DUE/HAL_pinsDebug_Due.h"
-  #include "HAL_TEENSY35_36/HAL_pinsDebug_Teensy.h"
+  #elif IS_32BIT_TEENSY
-#elif defined(TARGET_LPC1768)
+    #include "HAL_TEENSY35_36/HAL_pinsDebug_Teensy.h"
-  #include "HAL_LPC1768/HAL_pinsDebug.h"
+  #elif defined(TARGET_LPC1768)
-#else
+    #include "HAL_LPC1768/pinsDebug_Re_ARM.h"
-  #error Unsupported Platform!
+  #else
-#endif
+    #error Unsupported Platform!
+  #endif
+#endif  
 
 #endif